a377302623
This provides a standard interface to setting the global networking config for all interfaces and interface types. For ports that already use either a static hostname (mimxrt, rp2) they will now use the configured value. The default is configured by the port (or optionally the board). For interfaces that previously supported .config(hostname), this is still supported but now implemented using the global network.hostname. Similarly, pyb.country and rp2.country are now deprecated, but the methods still exist (and forward to network.hostname). Because ESP32/ESP8266 do not use extmod/modnetwork.c they are not affected by this commit. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
330 lines
14 KiB
C
330 lines
14 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
* The MIT License (MIT)
|
|
* Copyright (c) 2022 Arduino SA
|
|
*/
|
|
|
|
#define MICROPY_HW_BOARD_NAME "PORTENTA"
|
|
#define MICROPY_HW_MCU_NAME "STM32H747"
|
|
#define MICROPY_PY_SYS_PLATFORM "Portenta"
|
|
#define MICROPY_HW_FLASH_FS_LABEL "portenta"
|
|
|
|
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "Portenta"
|
|
|
|
#define MICROPY_OBJ_REPR (MICROPY_OBJ_REPR_C)
|
|
#define UINT_FMT "%u"
|
|
#define INT_FMT "%d"
|
|
typedef int mp_int_t; // must be pointer size
|
|
typedef unsigned int mp_uint_t; // must be pointer size
|
|
|
|
#define MICROPY_FATFS_EXFAT (1)
|
|
#define MICROPY_HW_ENABLE_RTC (1)
|
|
#define MICROPY_HW_ENABLE_RNG (1)
|
|
#define MICROPY_HW_ENABLE_ADC (1)
|
|
#define MICROPY_HW_ENABLE_DAC (1)
|
|
#define MICROPY_HW_ENABLE_USB (1)
|
|
#define MICROPY_HW_HAS_SWITCH (0)
|
|
#define MICROPY_HW_HAS_FLASH (1)
|
|
#define MICROPY_HW_ENABLE_SERVO (1)
|
|
#define MICROPY_HW_ENABLE_TIMER (1)
|
|
#define MICROPY_HW_ENABLE_SDCARD (1)
|
|
#define MICROPY_HW_ENABLE_MMCARD (0)
|
|
|
|
// Flash storage config
|
|
#define MICROPY_HW_SPIFLASH_ENABLE_CACHE (1)
|
|
#define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (0)
|
|
|
|
#define MICROPY_BOARD_STARTUP PORTENTA_board_startup
|
|
void PORTENTA_board_startup(void);
|
|
|
|
#define MICROPY_BOARD_EARLY_INIT PORTENTA_board_early_init
|
|
void PORTENTA_board_early_init(void);
|
|
|
|
#define MICROPY_BOARD_ENTER_BOOTLOADER(nargs, args) PORTENTA_board_enter_bootloader()
|
|
void PORTENTA_board_enter_bootloader(void);
|
|
|
|
void PORTENTA_board_low_power(int mode);
|
|
#define MICROPY_BOARD_LEAVE_STOP PORTENTA_board_low_power(0);
|
|
#define MICROPY_BOARD_ENTER_STOP PORTENTA_board_low_power(1);
|
|
#define MICROPY_BOARD_ENTER_STANDBY PORTENTA_board_low_power(2);
|
|
|
|
void PORTENTA_board_osc_enable(int enable);
|
|
#define MICROPY_BOARD_OSC_ENABLE PORTENTA_board_osc_enable(1);
|
|
#define MICROPY_BOARD_OSC_DISABLE PORTENTA_board_osc_enable(0);
|
|
|
|
// PLL1 400MHz/50MHz for SDMMC and FDCAN
|
|
// USB and RNG are clocked from the HSI48
|
|
#define MICROPY_HW_CLK_PLLM (5)
|
|
#define MICROPY_HW_CLK_PLLN (160)
|
|
#define MICROPY_HW_CLK_PLLP (2)
|
|
#define MICROPY_HW_CLK_PLLQ (16)
|
|
#define MICROPY_HW_CLK_PLLR (2)
|
|
#define MICROPY_HW_CLK_PLLVCI (RCC_PLL1VCIRANGE_2)
|
|
#define MICROPY_HW_CLK_PLLVCO (RCC_PLL1VCOWIDE)
|
|
#define MICROPY_HW_CLK_PLLFRAC (0)
|
|
|
|
// PLL2 200MHz for FMC and QSPI.
|
|
#define MICROPY_HW_CLK_PLL2M (5)
|
|
#define MICROPY_HW_CLK_PLL2N (80)
|
|
#define MICROPY_HW_CLK_PLL2P (2)
|
|
#define MICROPY_HW_CLK_PLL2Q (2)
|
|
#define MICROPY_HW_CLK_PLL2R (2)
|
|
#define MICROPY_HW_CLK_PLL2VCI (RCC_PLL2VCIRANGE_2)
|
|
#define MICROPY_HW_CLK_PLL2VCO (RCC_PLL2VCOWIDE)
|
|
#define MICROPY_HW_CLK_PLL2FRAC (0)
|
|
|
|
// PLL3 160MHz for ADC and SPI123
|
|
#define MICROPY_HW_CLK_PLL3M (5)
|
|
#define MICROPY_HW_CLK_PLL3N (160)
|
|
#define MICROPY_HW_CLK_PLL3P (2)
|
|
#define MICROPY_HW_CLK_PLL3Q (5)
|
|
#define MICROPY_HW_CLK_PLL3R (2)
|
|
#define MICROPY_HW_CLK_PLL3VCI (RCC_PLL3VCIRANGE_2)
|
|
#define MICROPY_HW_CLK_PLL3VCO (RCC_PLL3VCOWIDE)
|
|
#define MICROPY_HW_CLK_PLL3FRAC (0)
|
|
|
|
// HSE in BYPASS mode.
|
|
#define MICROPY_HW_CLK_USE_BYPASS (1)
|
|
|
|
// Bus clock divider values
|
|
#define MICROPY_HW_CLK_AHB_DIV (RCC_HCLK_DIV2)
|
|
#define MICROPY_HW_CLK_APB1_DIV (RCC_APB1_DIV2)
|
|
#define MICROPY_HW_CLK_APB2_DIV (RCC_APB2_DIV2)
|
|
#define MICROPY_HW_CLK_APB3_DIV (RCC_APB3_DIV2)
|
|
#define MICROPY_HW_CLK_APB4_DIV (RCC_APB4_DIV2)
|
|
|
|
// Peripheral clock sources
|
|
#define MICROPY_HW_RCC_HSI48_STATE (RCC_HSI48_ON)
|
|
#define MICROPY_HW_RCC_USB_CLKSOURCE (RCC_USBCLKSOURCE_HSI48)
|
|
#define MICROPY_HW_RCC_RTC_CLKSOURCE (RCC_RTCCLKSOURCE_LSI)
|
|
#define MICROPY_HW_RCC_FMC_CLKSOURCE (RCC_FMCCLKSOURCE_PLL2)
|
|
#define MICROPY_HW_RCC_RNG_CLKSOURCE (RCC_RNGCLKSOURCE_HSI48)
|
|
#define MICROPY_HW_RCC_ADC_CLKSOURCE (RCC_ADCCLKSOURCE_PLL3)
|
|
#define MICROPY_HW_RCC_SDMMC_CLKSOURCE (RCC_SDMMCCLKSOURCE_PLL)
|
|
#define MICROPY_HW_RCC_FDCAN_CLKSOURCE (RCC_FDCANCLKSOURCE_PLL)
|
|
#define MICROPY_HW_RCC_SPI123_CLKSOURCE (RCC_SPI123CLKSOURCE_PLL3)
|
|
#define MICROPY_HW_RCC_I2C123_CLKSOURCE (RCC_I2C123CLKSOURCE_D2PCLK1)
|
|
#define MICROPY_HW_RCC_QSPI_CLKSOURCE (RCC_QSPICLKSOURCE_PLL2)
|
|
|
|
// SMPS configuration
|
|
#define MICROPY_HW_PWR_SMPS_CONFIG (PWR_SMPS_1V8_SUPPLIES_LDO)
|
|
|
|
// There is an external 32kHz oscillator
|
|
#define RTC_ASYNCH_PREDIV (0)
|
|
#define RTC_SYNCH_PREDIV (0x7fff)
|
|
#define MICROPY_HW_RTC_USE_BYPASS (1)
|
|
#define MICROPY_HW_RTC_USE_US (1)
|
|
#define MICROPY_HW_RTC_USE_CALOUT (1)
|
|
|
|
#if (MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE == 0)
|
|
// QSPI flash #1 for storage
|
|
#define MICROPY_HW_QSPI_PRESCALER (2) // 100MHz
|
|
#define MICROPY_HW_QSPIFLASH_SIZE_BITS_LOG2 (27)
|
|
#define MICROPY_HW_SPIFLASH_SIZE_BITS (128 * 1024 * 1024)
|
|
#define MICROPY_HW_QSPIFLASH_CS (pyb_pin_QSPI2_CS)
|
|
#define MICROPY_HW_QSPIFLASH_SCK (pyb_pin_QSPI2_CLK)
|
|
#define MICROPY_HW_QSPIFLASH_IO0 (pyb_pin_QSPI2_D0)
|
|
#define MICROPY_HW_QSPIFLASH_IO1 (pyb_pin_QSPI2_D1)
|
|
#define MICROPY_HW_QSPIFLASH_IO2 (pyb_pin_QSPI2_D2)
|
|
#define MICROPY_HW_QSPIFLASH_IO3 (pyb_pin_QSPI2_D3)
|
|
|
|
// SPI flash #1, block device config
|
|
extern const struct _mp_spiflash_config_t spiflash_config;
|
|
extern struct _spi_bdev_t spi_bdev;
|
|
#define MICROPY_HW_BDEV_IOCTL(op, arg) ( \
|
|
(op) == BDEV_IOCTL_NUM_BLOCKS ? (MICROPY_HW_SPIFLASH_SIZE_BITS / 8 / FLASH_BLOCK_SIZE) : \
|
|
(op) == BDEV_IOCTL_INIT ? spi_bdev_ioctl(&spi_bdev, (op), (uint32_t)&spiflash_config) : \
|
|
spi_bdev_ioctl(&spi_bdev, (op), (arg)) \
|
|
)
|
|
#define MICROPY_HW_BDEV_READBLOCKS(dest, bl, n) spi_bdev_readblocks(&spi_bdev, (dest), (bl), (n))
|
|
#define MICROPY_HW_BDEV_WRITEBLOCKS(src, bl, n) spi_bdev_writeblocks(&spi_bdev, (src), (bl), (n))
|
|
#define MICROPY_HW_BDEV_SPIFLASH_EXTENDED (&spi_bdev)
|
|
#endif
|
|
|
|
// 4 wait states
|
|
#define MICROPY_HW_FLASH_LATENCY FLASH_LATENCY_2
|
|
|
|
// UART config
|
|
#define MICROPY_HW_UART1_TX (pin_A9)
|
|
#define MICROPY_HW_UART1_RX (pin_A10)
|
|
#define MICROPY_HW_UART_REPL PYB_UART_1
|
|
#define MICROPY_HW_UART_REPL_BAUD 115200
|
|
|
|
// UART config
|
|
#define MICROPY_HW_UART8_TX (pin_J8)
|
|
#define MICROPY_HW_UART8_RX (pin_J9)
|
|
|
|
// UART7 config
|
|
#define MICROPY_HW_UART7_TX (pyb_pin_BT_TXD)
|
|
#define MICROPY_HW_UART7_RX (pyb_pin_BT_RXD)
|
|
#define MICROPY_HW_UART7_RTS (pyb_pin_BT_RTS)
|
|
#define MICROPY_HW_UART7_CTS (pyb_pin_BT_CTS)
|
|
|
|
// I2C busses
|
|
#define MICROPY_HW_I2C1_SCL (pin_B6)
|
|
#define MICROPY_HW_I2C1_SDA (pin_B7)
|
|
|
|
#define MICROPY_HW_I2C3_SCL (pin_H7)
|
|
#define MICROPY_HW_I2C3_SDA (pin_H8)
|
|
|
|
// SPI
|
|
#define MICROPY_HW_SPI2_NSS (pin_I0)
|
|
#define MICROPY_HW_SPI2_SCK (pin_I1)
|
|
#define MICROPY_HW_SPI2_MISO (pin_C2)
|
|
#define MICROPY_HW_SPI2_MOSI (pin_C3)
|
|
|
|
// USRSW is pulled low. Pressing the button makes the input go high.
|
|
#define MICROPY_HW_USRSW_PIN (pin_A0)
|
|
#define MICROPY_HW_USRSW_PULL (GPIO_NOPULL)
|
|
#define MICROPY_HW_USRSW_EXTI_MODE (GPIO_MODE_IT_RISING)
|
|
#define MICROPY_HW_USRSW_PRESSED (1)
|
|
|
|
// LEDs
|
|
#define MICROPY_HW_LED1 (pyb_pin_LEDR) // red
|
|
#define MICROPY_HW_LED2 (pyb_pin_LEDG) // green
|
|
#define MICROPY_HW_LED3 (pyb_pin_LEDB) // yellow
|
|
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
|
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
|
|
|
// WiFi SDMMC
|
|
#define MICROPY_HW_SDIO_SDMMC (1)
|
|
#define MICROPY_HW_SDIO_CK (pin_C12)
|
|
#define MICROPY_HW_SDIO_CMD (pin_D2)
|
|
#define MICROPY_HW_SDIO_D0 (pin_C8)
|
|
#define MICROPY_HW_SDIO_D1 (pin_C9)
|
|
#define MICROPY_HW_SDIO_D2 (pin_C10)
|
|
#define MICROPY_HW_SDIO_D3 (pin_C11)
|
|
|
|
// SD Card SDMMC
|
|
#define MICROPY_HW_SDCARD_SDMMC (2)
|
|
#define MICROPY_HW_SDCARD_CK (pin_D6)
|
|
#define MICROPY_HW_SDCARD_CMD (pin_D7)
|
|
#define MICROPY_HW_SDCARD_D0 (pin_B14)
|
|
#define MICROPY_HW_SDCARD_D1 (pin_B15)
|
|
#define MICROPY_HW_SDCARD_D2 (pin_B3)
|
|
#define MICROPY_HW_SDCARD_D3 (pin_B4)
|
|
|
|
// USB config
|
|
#define MICROPY_HW_USB_HS (1)
|
|
#define MICROPY_HW_USB_HS_ULPI_NXT (pin_H4)
|
|
#define MICROPY_HW_USB_HS_ULPI_STP (pin_C0)
|
|
#define MICROPY_HW_USB_HS_ULPI_DIR (pin_I11)
|
|
#define MICROPY_HW_USB_HS_ULPI3320 (1)
|
|
|
|
#define MICROPY_HW_USB_CDC_RX_DATA_SIZE (1024)
|
|
#define MICROPY_HW_USB_CDC_TX_DATA_SIZE (1024)
|
|
#define MICROPY_HW_USB_CDC_1200BPS_TOUCH (1)
|
|
#define GPIO_AF10_OTG_HS (GPIO_AF10_OTG2_HS)
|
|
|
|
// Bluetooth config
|
|
#define MICROPY_HW_BLE_UART_ID (PYB_UART_7)
|
|
#define MICROPY_HW_BLE_UART_BAUDRATE (115200)
|
|
#define MICROPY_HW_BLE_UART_BAUDRATE_SECONDARY (3000000)
|
|
|
|
// SDRAM
|
|
#define MICROPY_HW_SDRAM_SIZE (64 / 8 * 1024 * 1024) // 64 Mbit
|
|
#define MICROPY_HW_SDRAM_STARTUP_TEST (1)
|
|
#define MICROPY_HW_SDRAM_TEST_FAIL_ON_ERROR (true)
|
|
|
|
// Timing configuration for 200MHz/2=100MHz (10ns)
|
|
#define MICROPY_HW_SDRAM_CLOCK_PERIOD 2
|
|
#define MICROPY_HW_SDRAM_CAS_LATENCY 2
|
|
#define MICROPY_HW_SDRAM_FREQUENCY (100000) // 100 MHz
|
|
#define MICROPY_HW_SDRAM_TIMING_TMRD (2)
|
|
#define MICROPY_HW_SDRAM_TIMING_TXSR (7)
|
|
#define MICROPY_HW_SDRAM_TIMING_TRAS (5)
|
|
#define MICROPY_HW_SDRAM_TIMING_TRC (7)
|
|
#define MICROPY_HW_SDRAM_TIMING_TWR (2)
|
|
#define MICROPY_HW_SDRAM_TIMING_TRP (3)
|
|
#define MICROPY_HW_SDRAM_TIMING_TRCD (3)
|
|
|
|
#define MICROPY_HW_SDRAM_ROW_BITS_NUM 12
|
|
#define MICROPY_HW_SDRAM_MEM_BUS_WIDTH 16
|
|
#define MICROPY_HW_SDRAM_REFRESH_CYCLES 4096
|
|
|
|
#define MICROPY_HW_SDRAM_COLUMN_BITS_NUM 8
|
|
#define MICROPY_HW_SDRAM_INTERN_BANKS_NUM 4
|
|
#define MICROPY_HW_SDRAM_RPIPE_DELAY 0
|
|
#define MICROPY_HW_SDRAM_RBURST (1)
|
|
#define MICROPY_HW_SDRAM_WRITE_PROTECTION (0)
|
|
|
|
#define MICROPY_HW_SDRAM_AUTOREFRESH_NUM (8)
|
|
#define MICROPY_HW_SDRAM_BURST_LENGTH 1
|
|
#define MICROPY_HW_SDRAM_REFRESH_RATE (64) // ms
|
|
|
|
// SDRAM configuration
|
|
#define MICROPY_HW_FMC_SDCKE0 (pin_H2)
|
|
#define MICROPY_HW_FMC_SDNE0 (pin_H3)
|
|
#define MICROPY_HW_FMC_SDNBL0 (pin_E0)
|
|
#define MICROPY_HW_FMC_SDNBL1 (pin_E1)
|
|
#define MICROPY_HW_FMC_SDCLK (pin_G8)
|
|
#define MICROPY_HW_FMC_SDNCAS (pin_G15)
|
|
#define MICROPY_HW_FMC_SDNRAS (pin_F11)
|
|
#define MICROPY_HW_FMC_SDNWE (pin_H5)
|
|
#define MICROPY_HW_FMC_BA0 (pin_G4)
|
|
#define MICROPY_HW_FMC_BA1 (pin_G5)
|
|
#define MICROPY_HW_FMC_NBL0 (pin_E0)
|
|
#define MICROPY_HW_FMC_NBL1 (pin_E1)
|
|
#define MICROPY_HW_FMC_A0 (pin_F0)
|
|
#define MICROPY_HW_FMC_A1 (pin_F1)
|
|
#define MICROPY_HW_FMC_A2 (pin_F2)
|
|
#define MICROPY_HW_FMC_A3 (pin_F3)
|
|
#define MICROPY_HW_FMC_A4 (pin_F4)
|
|
#define MICROPY_HW_FMC_A5 (pin_F5)
|
|
#define MICROPY_HW_FMC_A6 (pin_F12)
|
|
#define MICROPY_HW_FMC_A7 (pin_F13)
|
|
#define MICROPY_HW_FMC_A8 (pin_F14)
|
|
#define MICROPY_HW_FMC_A9 (pin_F15)
|
|
#define MICROPY_HW_FMC_A10 (pin_G0)
|
|
#define MICROPY_HW_FMC_A11 (pin_G1)
|
|
#define MICROPY_HW_FMC_A12 (pin_G2)
|
|
#define MICROPY_HW_FMC_D0 (pin_D14)
|
|
#define MICROPY_HW_FMC_D1 (pin_D15)
|
|
#define MICROPY_HW_FMC_D2 (pin_D0)
|
|
#define MICROPY_HW_FMC_D3 (pin_D1)
|
|
#define MICROPY_HW_FMC_D4 (pin_E7)
|
|
#define MICROPY_HW_FMC_D5 (pin_E8)
|
|
#define MICROPY_HW_FMC_D6 (pin_E9)
|
|
#define MICROPY_HW_FMC_D7 (pin_E10)
|
|
#define MICROPY_HW_FMC_D8 (pin_E11)
|
|
#define MICROPY_HW_FMC_D9 (pin_E12)
|
|
#define MICROPY_HW_FMC_D10 (pin_E13)
|
|
#define MICROPY_HW_FMC_D11 (pin_E14)
|
|
#define MICROPY_HW_FMC_D12 (pin_E15)
|
|
#define MICROPY_HW_FMC_D13 (pin_D8)
|
|
#define MICROPY_HW_FMC_D14 (pin_D9)
|
|
#define MICROPY_HW_FMC_D15 (pin_D10)
|
|
|
|
// Ethernet via RMII
|
|
#define MICROPY_HW_ETH_MDC (pin_C1)
|
|
#define MICROPY_HW_ETH_MDIO (pin_A2)
|
|
#define MICROPY_HW_ETH_RMII_REF_CLK (pin_A1)
|
|
#define MICROPY_HW_ETH_RMII_CRS_DV (pin_A7)
|
|
#define MICROPY_HW_ETH_RMII_RXD0 (pin_C4)
|
|
#define MICROPY_HW_ETH_RMII_RXD1 (pin_C5)
|
|
#define MICROPY_HW_ETH_RMII_TX_EN (pin_G11)
|
|
#define MICROPY_HW_ETH_RMII_TXD0 (pin_G13)
|
|
#define MICROPY_HW_ETH_RMII_TXD1 (pin_G12)
|
|
|
|
#define MICROPY_HW_USB_VID 0x2341
|
|
#define MICROPY_HW_USB_PID 0x055B
|
|
#define MICROPY_HW_USB_PID_CDC_MSC (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC_HID (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_MSC (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC2_MSC (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC2 (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC3 (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC3_MSC (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC_MSC_HID (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC2_MSC_HID (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_PID_CDC3_MSC_HID (MICROPY_HW_USB_PID)
|
|
#define MICROPY_HW_USB_LANGID_STRING 0x409
|
|
#define MICROPY_HW_USB_MANUFACTURER_STRING "Arduino"
|
|
#define MICROPY_HW_USB_PRODUCT_FS_STRING "Portenta Virtual Comm Port in FS Mode"
|
|
#define MICROPY_HW_USB_PRODUCT_HS_STRING "Portenta Virtual Comm Port in HS Mode"
|
|
#define MICROPY_HW_USB_INTERFACE_FS_STRING "Portenta Interface"
|
|
#define MICROPY_HW_USB_INTERFACE_HS_STRING "Portenta Interface"
|
|
#define MICROPY_HW_USB_CONFIGURATION_FS_STRING "Portenta Config"
|
|
#define MICROPY_HW_USB_CONFIGURATION_HS_STRING "Portenta Config"
|