djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
a377302623
circuitpython/ports/rp2/CMakeLists.txt
Jim Mussared a377302623 extmod/modnetwork: Add network.hostname() and network.country(). 
This provides a standard interface to setting the global networking config
for all interfaces and interface types.

For ports that already use either a static hostname (mimxrt, rp2) they will
now use the configured value. The default is configured by the port
(or optionally the board).

For interfaces that previously supported .config(hostname), this is still
supported but now implemented using the global network.hostname.

Similarly, pyb.country and rp2.country are now deprecated, but the methods
still exist (and forward to network.hostname).

Because ESP32/ESP8266 do not use extmod/modnetwork.c they are not affected
by this commit.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-03-01 01:26:17 +11:00

467 lines
14 KiB
CMake
Raw Blame History

cmake_minimum_required(VERSION 3.12)
# Set build type to reduce firmware size
if(NOT CMAKE_BUILD_TYPE)
set(CMAKE_BUILD_TYPE MinSizeRel)
endif()
# Set main target and component locations
set(MICROPY_TARGET firmware)
get_filename_component(MICROPY_DIR "../.." ABSOLUTE)
if (PICO_SDK_PATH_OVERRIDE)
set(PICO_SDK_PATH ${PICO_SDK_PATH_OVERRIDE})
else()
set(PICO_SDK_PATH ../../lib/pico-sdk)
endif()
# Use the local tinyusb instead of the one in pico-sdk
set(PICO_TINYUSB_PATH ${MICROPY_DIR}/lib/tinyusb)
# Use the local lwip instead of the one in pico-sdk
set(PICO_LWIP_PATH ${MICROPY_DIR}/lib/lwip)
# Set the location of this port's directory.
set(MICROPY_PORT_DIR ${CMAKE_SOURCE_DIR})
# Set the board if it's not already set.
if(NOT MICROPY_BOARD)
set(MICROPY_BOARD PICO)
endif()
# Set the board directory and check that it exists.
if(NOT MICROPY_BOARD_DIR)
set(MICROPY_BOARD_DIR ${MICROPY_PORT_DIR}/boards/${MICROPY_BOARD})
endif()
if(NOT EXISTS ${MICROPY_BOARD_DIR}/mpconfigboard.cmake)
message(FATAL_ERROR "Invalid MICROPY_BOARD specified: ${MICROPY_BOARD}")
endif()
set(MICROPY_USER_FROZEN_MANIFEST ${MICROPY_FROZEN_MANIFEST})
# Include board config, it may override MICROPY_FROZEN_MANIFEST
include(${MICROPY_BOARD_DIR}/mpconfigboard.cmake)
# Set the PICO_BOARD if it's not already set (allow a board to override it).
if(NOT PICO_BOARD)
string(TOLOWER ${MICROPY_BOARD} PICO_BOARD)
endif()
# Enable extmod components that will be configured by extmod.cmake.
# A board may also have enabled additional components.
set(MICROPY_SSL_MBEDTLS ON)
# Use the local cyw43_driver instead of the one in pico-sdk
if (MICROPY_PY_NETWORK_CYW43)
set(PICO_CYW43_DRIVER_PATH ${MICROPY_DIR}/lib/cyw43-driver)
endif()
# Necessary submodules for all boards.
string(CONCAT GIT_SUBMODULES "${GIT_SUBMODULES} " lib/mbedtls)
string(CONCAT GIT_SUBMODULES "${GIT_SUBMODULES} " lib/tinyusb)
# Include component cmake fragments
include(${MICROPY_DIR}/py/py.cmake)
include(${MICROPY_DIR}/extmod/extmod.cmake)
include(${PICO_SDK_PATH}/pico_sdk_init.cmake)
# Define the top-level project
project(${MICROPY_TARGET})
pico_sdk_init()
include(${MICROPY_DIR}/py/usermod.cmake)
add_executable(${MICROPY_TARGET})
set(MICROPY_QSTRDEFS_PORT
${PROJECT_SOURCE_DIR}/qstrdefsport.h
)
set(MICROPY_SOURCE_LIB
${MICROPY_DIR}/lib/littlefs/lfs1.c
${MICROPY_DIR}/lib/littlefs/lfs1_util.c
${MICROPY_DIR}/lib/littlefs/lfs2.c
${MICROPY_DIR}/lib/littlefs/lfs2_util.c
${MICROPY_DIR}/lib/oofatfs/ff.c
${MICROPY_DIR}/lib/oofatfs/ffunicode.c
${MICROPY_DIR}/shared/netutils/dhcpserver.c
${MICROPY_DIR}/shared/netutils/netutils.c
${MICROPY_DIR}/shared/netutils/trace.c
${MICROPY_DIR}/shared/readline/readline.c
${MICROPY_DIR}/shared/runtime/gchelper_thumb1.s
${MICROPY_DIR}/shared/runtime/gchelper_native.c
${MICROPY_DIR}/shared/runtime/interrupt_char.c
${MICROPY_DIR}/shared/runtime/mpirq.c
${MICROPY_DIR}/shared/runtime/pyexec.c
${MICROPY_DIR}/shared/runtime/stdout_helpers.c
${MICROPY_DIR}/shared/runtime/sys_stdio_mphal.c
${MICROPY_DIR}/shared/timeutils/timeutils.c
${MICROPY_DIR}/shared/tinyusb/mp_cdc_common.c
${MICROPY_DIR}/shared/tinyusb/mp_usbd.c
${MICROPY_DIR}/shared/tinyusb/mp_usbd_descriptor.c
)
set(MICROPY_SOURCE_DRIVERS
${MICROPY_DIR}/drivers/bus/softspi.c
${MICROPY_DIR}/drivers/dht/dht.c
)
set(MICROPY_SOURCE_PORT
fatfs_port.c
machine_adc.c
machine_bitstream.c
machine_i2c.c
machine_i2s.c
machine_pin.c
machine_rtc.c
machine_spi.c
machine_timer.c
machine_uart.c
machine_wdt.c
main.c
modmachine.c
modrp2.c
modutime.c
mphalport.c
mpnetworkport.c
mpthreadport.c
pendsv.c
rp2_flash.c
rp2_pio.c
uart.c
usbd.c
msc_disk.c
mbedtls/mbedtls_port.c
${CMAKE_BINARY_DIR}/pins_${MICROPY_BOARD}.c
)
set(MICROPY_SOURCE_QSTR
${MICROPY_SOURCE_PY}
${MICROPY_DIR}/shared/readline/readline.c
${MICROPY_DIR}/shared/runtime/mpirq.c
${MICROPY_DIR}/shared/runtime/sys_stdio_mphal.c
${PROJECT_SOURCE_DIR}/machine_adc.c
${PROJECT_SOURCE_DIR}/machine_i2c.c
${PROJECT_SOURCE_DIR}/machine_i2s.c
${PROJECT_SOURCE_DIR}/machine_pin.c
${PROJECT_SOURCE_DIR}/machine_rtc.c
${PROJECT_SOURCE_DIR}/machine_spi.c
${PROJECT_SOURCE_DIR}/machine_timer.c
${PROJECT_SOURCE_DIR}/machine_uart.c
${PROJECT_SOURCE_DIR}/machine_wdt.c
${PROJECT_SOURCE_DIR}/modmachine.c
${PROJECT_SOURCE_DIR}/modrp2.c
${PROJECT_SOURCE_DIR}/moduos.c
${PROJECT_SOURCE_DIR}/modutime.c
${PROJECT_SOURCE_DIR}/rp2_flash.c
${PROJECT_SOURCE_DIR}/rp2_pio.c
${CMAKE_BINARY_DIR}/pins_${MICROPY_BOARD}.c
)
set(PICO_SDK_COMPONENTS
cmsis_core
hardware_adc
hardware_base
hardware_clocks
hardware_dma
hardware_flash
hardware_gpio
hardware_i2c
hardware_irq
hardware_pio
hardware_pll
hardware_pwm
hardware_regs
hardware_rtc
hardware_spi
hardware_structs
hardware_sync
hardware_timer
hardware_uart
hardware_watchdog
hardware_xosc
pico_base_headers
pico_binary_info
pico_bootrom
pico_multicore
pico_platform
pico_stdio
pico_stdlib
pico_sync
pico_time
pico_unique_id
pico_util
tinyusb_common
tinyusb_device
)
if (MICROPY_PY_LWIP)
target_link_libraries(${MICROPY_TARGET} micropy_lib_lwip)
target_include_directories(${MICROPY_TARGET} PRIVATE
lwip_inc
)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_PY_LWIP=1
)
endif()
if(MICROPY_PY_BLUETOOTH)
list(APPEND MICROPY_SOURCE_PORT mpbthciport.c)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_PY_BLUETOOTH=1
MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS=1
MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE=1
MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING=1
MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS=1
)
endif()
if(MICROPY_BLUETOOTH_NIMBLE)
string(CONCAT GIT_SUBMODULES "${GIT_SUBMODULES} " lib/mynewt-nimble)
if(NOT (${ECHO_SUBMODULES}) AND NOT EXISTS ${MICROPY_DIR}/lib/mynewt-nimble/nimble/host/include/host/ble_hs.h)
message(FATAL_ERROR " mynewt-nimble not initialized.\n Run 'make BOARD=${MICROPY_BOARD} submodules'")
endif()
list(APPEND MICROPY_SOURCE_PORT mpnimbleport.c)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_BLUETOOTH_NIMBLE=1
MICROPY_BLUETOOTH_NIMBLE_BINDINGS_ONLY=0
)
target_compile_options(${MICROPY_TARGET} PRIVATE
# TODO: This flag is currently needed to make nimble build.
-Wno-unused-but-set-variable
)
include(${MICROPY_DIR}/extmod/nimble/nimble.cmake)
target_link_libraries(${MICROPY_TARGET} micropy_extmod_nimble)
get_target_property(NIMBLE_INCLUDE micropy_extmod_nimble INTERFACE_INCLUDE_DIRECTORIES)
list(APPEND MICROPY_INC_CORE ${NIMBLE_INCLUDE})
endif()
# tinyusb helper
target_include_directories(${MICROPY_TARGET} PRIVATE
${MICROPY_DIR}/shared/tinyusb/
)
if (MICROPY_PY_NETWORK_CYW43)
string(CONCAT GIT_SUBMODULES "${GIT_SUBMODULES} " lib/cyw43-driver)
if((NOT (${ECHO_SUBMODULES})) AND NOT EXISTS ${MICROPY_DIR}/lib/cyw43-driver/src/cyw43.h)
message(FATAL_ERROR " cyw43-driver not initialized.\n Run 'make BOARD=${MICROPY_BOARD} submodules'")
endif()
target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_PY_NETWORK_CYW43=1
MICROPY_PY_NETWORK_CYW43_USE_LIB_DRIVER=1
MICROPY_PY_SOCKET_DEFAULT_TIMEOUT_MS=30000 # default socket timeout
)
if (CMAKE_BUILD_TYPE MATCHES Debug)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
CYW43_USE_STATS=1
)
endif()
list(APPEND MICROPY_SOURCE_PORT
machine_pin_cyw43.c
)
target_link_libraries(${MICROPY_TARGET}
cyw43_driver_picow
cmsis_core
)
endif()
if (MICROPY_PY_NETWORK_NINAW10)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_PY_NETWORK_NINAW10=1
)
target_include_directories(${MICROPY_TARGET} PRIVATE
${MICROPY_DIR}/drivers/ninaw10/
)
# Enable NINA-W10 WiFi and Bluetooth drivers.
list(APPEND MICROPY_SOURCE_DRIVERS
${MICROPY_DIR}/drivers/ninaw10/nina_bt_hci.c
${MICROPY_DIR}/drivers/ninaw10/nina_wifi_drv.c
${MICROPY_DIR}/drivers/ninaw10/nina_wifi_bsp.c
${MICROPY_DIR}/drivers/ninaw10/machine_pin_nina.c
)
endif()
if (MICROPY_PY_NETWORK_WIZNET5K)
string(CONCAT GIT_SUBMODULES "${GIT_SUBMODULES} " lib/wiznet5k)
if((NOT (${ECHO_SUBMODULES})) AND NOT EXISTS ${MICROPY_DIR}/lib/wiznet5k/README.md)
message(FATAL_ERROR " wiznet5k not initialized.\n Run 'make BOARD=${MICROPY_BOARD} submodules'")
endif()
target_compile_definitions(${MICROPY_TARGET} PRIVATE
MICROPY_PY_NETWORK_WIZNET5K=1
WIZCHIP_PREFIXED_EXPORTS=1
_WIZCHIP_=${MICROPY_PY_NETWORK_WIZNET5K}
WIZCHIP_YIELD=mpy_wiznet_yield
)
if (MICROPY_PY_LWIP)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
# When using MACRAW mode (with lwIP), maximum buffer space must be used for the raw socket
WIZCHIP_USE_MAX_BUFFER=1
)
endif()
target_include_directories(${MICROPY_TARGET} PRIVATE
${MICROPY_DIR}/lib/wiznet5k/
${MICROPY_DIR}/lib/wiznet5k/Ethernet/
)
list(APPEND MICROPY_SOURCE_LIB
${MICROPY_DIR}/lib/wiznet5k/Ethernet/W5100/w5100.c
${MICROPY_DIR}/lib/wiznet5k/Ethernet/W5100S/w5100s.c
${MICROPY_DIR}/lib/wiznet5k/Ethernet/W5200/w5200.c
${MICROPY_DIR}/lib/wiznet5k/Ethernet/W5300/w5300.c
${MICROPY_DIR}/lib/wiznet5k/Ethernet/W5500/w5500.c
${MICROPY_DIR}/lib/wiznet5k/Ethernet/socket.c
${MICROPY_DIR}/lib/wiznet5k/Ethernet/wizchip_conf.c
${MICROPY_DIR}/lib/wiznet5k/Internet/DNS/dns.c
${MICROPY_DIR}/lib/wiznet5k/Internet/DHCP/dhcp.c
)
endif()
# Add qstr sources for extmod and usermod, in case they are modified by components above.
list(APPEND MICROPY_SOURCE_QSTR
${MICROPY_SOURCE_EXTMOD}
${MICROPY_SOURCE_USERMOD}
)
# Define mpy-cross flags
set(MICROPY_CROSS_FLAGS -march=armv6m)
# Set the frozen manifest file
if (MICROPY_USER_FROZEN_MANIFEST)
set(MICROPY_FROZEN_MANIFEST ${MICROPY_USER_FROZEN_MANIFEST})
elseif (NOT MICROPY_FROZEN_MANIFEST)
set(MICROPY_FROZEN_MANIFEST ${PROJECT_SOURCE_DIR}/boards/manifest.py)
endif()
target_sources(${MICROPY_TARGET} PRIVATE
${MICROPY_SOURCE_PY}
${MICROPY_SOURCE_EXTMOD}
${MICROPY_SOURCE_LIB}
${MICROPY_SOURCE_DRIVERS}
${MICROPY_SOURCE_PORT}
)
target_link_libraries(${MICROPY_TARGET} micropy_lib_mbedtls)
target_link_libraries(${MICROPY_TARGET} usermod)
target_include_directories(${MICROPY_TARGET} PRIVATE
${MICROPY_INC_CORE}
${MICROPY_INC_USERMOD}
${MICROPY_BOARD_DIR}
"${PROJECT_SOURCE_DIR}"
"${CMAKE_BINARY_DIR}"
)
target_compile_options(${MICROPY_TARGET} PRIVATE
-Wall
-Werror
)
set_source_files_properties(
${PICO_SDK_PATH}/src/rp2_common/pico_double/double_math.c
${PICO_SDK_PATH}/src/rp2_common/pico_float/float_math.c
PROPERTIES
COMPILE_OPTIONS "-Wno-error=uninitialized"
)
set_source_files_properties(
${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/dcd_rp2040.c
${PICO_TINYUSB_PATH}/src/portable/raspberrypi/rp2040/rp2040_usb.c
PROPERTIES
COMPILE_OPTIONS "-Wno-error=array-bounds;-Wno-error=unused-but-set-variable"
)
target_compile_definitions(${MICROPY_TARGET} PRIVATE
FFCONF_H=\"${MICROPY_OOFATFS_DIR}/ffconf.h\"
LFS1_NO_MALLOC LFS1_NO_DEBUG LFS1_NO_WARN LFS1_NO_ERROR LFS1_NO_ASSERT
LFS2_NO_MALLOC LFS2_NO_DEBUG LFS2_NO_WARN LFS2_NO_ERROR LFS2_NO_ASSERT
PICO_FLOAT_PROPAGATE_NANS=1
PICO_STACK_SIZE=0x2000
PICO_CORE1_STACK_SIZE=0
PICO_PROGRAM_NAME="MicroPython"
PICO_NO_PROGRAM_VERSION_STRING=1 # do it ourselves in main.c
MICROPY_BUILD_TYPE="${CMAKE_C_COMPILER_ID} ${CMAKE_C_COMPILER_VERSION} ${CMAKE_BUILD_TYPE}"
PICO_NO_BI_STDIO_UART=1 # we call it UART REPL
PICO_RP2040_USB_DEVICE_ENUMERATION_FIX=1
)
target_link_libraries(${MICROPY_TARGET}
${PICO_SDK_COMPONENTS}
)
if (MICROPY_HW_ENABLE_DOUBLE_TAP)
# Enable double tap reset into bootrom.
target_link_libraries(${MICROPY_TARGET}
pico_bootsel_via_double_reset
)
endif()
# todo this is a bit brittle, but we want to move a few source files into RAM (which requires
# a linker script modification) until we explicitly add macro calls around the function
# defs to move them into RAM.
if (PICO_ON_DEVICE AND NOT PICO_NO_FLASH AND NOT PICO_COPY_TO_RAM)
pico_set_linker_script(${MICROPY_TARGET} ${CMAKE_CURRENT_LIST_DIR}/memmap_mp.ld)
endif()
pico_add_extra_outputs(${MICROPY_TARGET})
pico_find_compiler(PICO_COMPILER_SIZE ${PICO_GCC_TRIPLE}-size)
add_custom_command(TARGET ${MICROPY_TARGET}
POST_BUILD
COMMAND ${PICO_COMPILER_SIZE} --format=berkeley ${PROJECT_BINARY_DIR}/${MICROPY_TARGET}.elf
VERBATIM
)
# Collect all the include directories and compile definitions for the pico-sdk components.
foreach(comp ${PICO_SDK_COMPONENTS})
micropy_gather_target_properties(${comp})
micropy_gather_target_properties(${comp}_headers)
endforeach()
# Include the main MicroPython cmake rules.
include(${MICROPY_DIR}/py/mkrules.cmake)
set(MICROPY_BOARDS_DIR "${MICROPY_PORT_DIR}/boards")
set(GEN_PINS_AF_CSV "${MICROPY_BOARDS_DIR}/rp2_af.csv")
set(GEN_PINS_PREFIX "${MICROPY_BOARDS_DIR}/rp2_prefix.c")
set(GEN_PINS_MKPINS "${MICROPY_BOARDS_DIR}/make-pins.py")
set(GEN_PINS_SRC "${CMAKE_BINARY_DIR}/pins_${MICROPY_BOARD}.c")
set(GEN_PINS_HDR "${MICROPY_GENHDR_DIR}/pins.h")
set(GEN_PINS_QSTR "${CMAKE_BINARY_DIR}/pins_qstr.h")
set(GEN_PINS_AF_CONST "${MICROPY_GENHDR_DIR}/pins_af_const.h")
set(GEN_PINS_AF_PY "${CMAKE_BINARY_DIR}/pins_af.py")
if(EXISTS "${MICROPY_BOARDS_DIR}/${MICROPY_BOARD}/pins.csv")
set(GEN_PINS_BOARD_CSV "${MICROPY_BOARDS_DIR}/${MICROPY_BOARD}/pins.csv")
set(GEN_PINS_CSV_ARG --board "${GEN_PINS_BOARD_CSV}")
endif()
target_sources(${MICROPY_TARGET} PRIVATE
${GEN_PINS_HDR}
)
# Generate pins
add_custom_command(
OUTPUT ${GEN_PINS_HDR} ${GEN_PINS_SRC} ${GEN_PINS_QSTR}
COMMAND ${Python3_EXECUTABLE} ${GEN_PINS_MKPINS} ${GEN_PINS_CSV_ARG} --af ${GEN_PINS_AF_CSV} --prefix ${GEN_PINS_PREFIX}
--hdr ${GEN_PINS_HDR} --qstr ${GEN_PINS_QSTR} --af-const ${GEN_PINS_AF_CONST} --af-py ${GEN_PINS_AF_PY} > ${GEN_PINS_SRC}
DEPENDS
${GEN_PINS_AF_CSV}
${GEN_PINS_BOARD_CSV}
${GEN_PINS_MKPINS}
${GEN_PINS_PREFIX}
${MICROPY_MPVERSION}
VERBATIM
COMMAND_EXPAND_LISTS
)
Reference in New Issue View Git Blame Copy Permalink