61339aa506
This commit adds initial support for STM32H5xx MCUs. The following features have been confirmed to be working on an STM32H573: - UART over REPL and USB CDC - USB CDC and MSC - internal flash filesystem - machine.Pin - machine.SPI transfers with DMA - machine.ADC - machine.RTC - pyb.LED - pyb.Switch - pyb.rng - mboot Signed-off-by: Damien George <damien@micropython.org>
1733 lines
65 KiB
C
1733 lines
65 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2015-2019 Damien P. George
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <stdint.h>
|
|
|
|
#include "py/obj.h"
|
|
#include "py/mphal.h"
|
|
#include "systick.h"
|
|
#include "dma.h"
|
|
#include "irq.h"
|
|
|
|
// When this option is enabled, the DMA will turn off automatically after
|
|
// a period of inactivity.
|
|
#ifndef MICROPY_HW_DMA_ENABLE_AUTO_TURN_OFF
|
|
#define MICROPY_HW_DMA_ENABLE_AUTO_TURN_OFF (1)
|
|
#endif
|
|
|
|
#define DMA_IDLE_ENABLED() (dma_idle.enabled != 0)
|
|
#define DMA_SYSTICK_LOG2 (3)
|
|
#define DMA_SYSTICK_MASK ((1 << DMA_SYSTICK_LOG2) - 1)
|
|
#define DMA_IDLE_TICK_MAX (8) // 8*8 = 64 msec
|
|
#define DMA_IDLE_TICK(tick) (((tick) & ~(SYSTICK_DISPATCH_NUM_SLOTS - 1) & DMA_SYSTICK_MASK) == 0)
|
|
|
|
#define ENABLE_SDIO (MICROPY_HW_ENABLE_SDCARD || MICROPY_HW_ENABLE_MMCARD || MICROPY_PY_NETWORK_CYW43)
|
|
|
|
// If the CYW43 driver is enabled then SDIO DMA can happen preemptively (on an
|
|
// IRQ) and so the SDIO needs exclusive access to its DMA resource.
|
|
#define SDIO_NEEDS_EXCLUSIVE_DMA_ACCESS (MICROPY_PY_NETWORK_CYW43 && MICROPY_HW_SDIO_SDMMC == 1)
|
|
|
|
typedef enum {
|
|
dma_id_not_defined=-1,
|
|
dma_id_0,
|
|
dma_id_1,
|
|
dma_id_2,
|
|
dma_id_3,
|
|
dma_id_4,
|
|
dma_id_5,
|
|
dma_id_6,
|
|
dma_id_7,
|
|
dma_id_8,
|
|
dma_id_9,
|
|
dma_id_10,
|
|
dma_id_11,
|
|
dma_id_12,
|
|
dma_id_13,
|
|
dma_id_14,
|
|
dma_id_15,
|
|
} dma_id_t;
|
|
|
|
typedef union {
|
|
uint16_t enabled; // Used to test if both counters are == 0
|
|
uint8_t counter[2];
|
|
} dma_idle_count_t;
|
|
|
|
struct _dma_descr_t {
|
|
#if defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
|
|
DMA_Stream_TypeDef *instance;
|
|
#elif defined(STM32F0) || defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32L0) || defined(STM32L1) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL)
|
|
DMA_Channel_TypeDef *instance;
|
|
#else
|
|
#error "Unsupported Processor"
|
|
#endif
|
|
uint32_t sub_instance;
|
|
dma_id_t id;
|
|
const DMA_InitTypeDef *init;
|
|
};
|
|
|
|
// Default parameters to dma_init() shared by spi and i2c; Channel and Direction
|
|
// vary depending on the peripheral instance so they get passed separately
|
|
#if defined(STM32H5)
|
|
static const DMA_InitTypeDef dma_init_struct_spi_i2c = {
|
|
.Request = 0, // set by dma_init_handle
|
|
.BlkHWRequest = DMA_BREQ_SINGLE_BURST,
|
|
.Direction = 0, // set by dma_init_handle
|
|
.SrcInc = 0, // set by dma_init_handle
|
|
.DestInc = 0, // set by dma_init_handle
|
|
.SrcDataWidth = DMA_SRC_DATAWIDTH_BYTE,
|
|
.DestDataWidth = DMA_DEST_DATAWIDTH_BYTE,
|
|
.Priority = DMA_LOW_PRIORITY_LOW_WEIGHT,
|
|
.SrcBurstLength = 1,
|
|
.DestBurstLength = 1,
|
|
.TransferAllocatedPort = DMA_SRC_ALLOCATED_PORT0 | DMA_DEST_ALLOCATED_PORT0,
|
|
.TransferEventMode = DMA_TCEM_BLOCK_TRANSFER,
|
|
.Mode = DMA_NORMAL, // DMA_NORMAL or DMA_PFCTRL (peripheral flow control mode)
|
|
};
|
|
#else
|
|
static const DMA_InitTypeDef dma_init_struct_spi_i2c = {
|
|
#if defined(STM32F4) || defined(STM32F7)
|
|
.Channel = 0,
|
|
#elif defined(STM32G0) || defined(STM32G4) || defined(STM32H7) || defined(STM32L0) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL)
|
|
.Request = 0,
|
|
#endif
|
|
.Direction = 0,
|
|
.PeriphInc = DMA_PINC_DISABLE,
|
|
.MemInc = DMA_MINC_ENABLE,
|
|
.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,
|
|
.MemDataAlignment = DMA_MDATAALIGN_BYTE,
|
|
.Mode = DMA_NORMAL,
|
|
.Priority = DMA_PRIORITY_LOW,
|
|
#if defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
|
|
.FIFOMode = DMA_FIFOMODE_DISABLE,
|
|
.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL,
|
|
.MemBurst = DMA_MBURST_INC4,
|
|
.PeriphBurst = DMA_PBURST_INC4
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
#if MICROPY_HW_ENABLE_I2S
|
|
// Default parameters to dma_init() for i2s; Channel and Direction
|
|
// vary depending on the peripheral instance so they get passed separately
|
|
static const DMA_InitTypeDef dma_init_struct_i2s = {
|
|
#if defined(STM32F4) || defined(STM32F7)
|
|
.Channel = 0,
|
|
#elif defined(STM32G0) || defined(STM32H7) || defined(STM32L0) || defined(STM32L4)
|
|
.Request = 0,
|
|
#endif
|
|
.Direction = DMA_MEMORY_TO_PERIPH,
|
|
.PeriphInc = DMA_PINC_DISABLE,
|
|
.MemInc = DMA_MINC_ENABLE,
|
|
.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD,
|
|
.MemDataAlignment = DMA_MDATAALIGN_HALFWORD,
|
|
.Mode = DMA_CIRCULAR,
|
|
.Priority = DMA_PRIORITY_LOW,
|
|
#if defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
|
|
.FIFOMode = DMA_FIFOMODE_DISABLE,
|
|
.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL,
|
|
.MemBurst = DMA_MBURST_SINGLE,
|
|
.PeriphBurst = DMA_PBURST_SINGLE
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
#if ENABLE_SDIO && !defined(STM32H7)
|
|
// Parameters to dma_init() for SDIO tx and rx.
|
|
static const DMA_InitTypeDef dma_init_struct_sdio = {
|
|
#if defined(STM32F4) || defined(STM32F7)
|
|
.Channel = 0,
|
|
#elif defined(STM32G0) || defined(STM32G4) || defined(STM32L0) || defined(STM32L4) || defined(STM32WB)
|
|
.Request = 0,
|
|
#endif
|
|
.Direction = 0,
|
|
.PeriphInc = DMA_PINC_DISABLE,
|
|
.MemInc = DMA_MINC_ENABLE,
|
|
.PeriphDataAlignment = DMA_PDATAALIGN_WORD,
|
|
.MemDataAlignment = DMA_MDATAALIGN_WORD,
|
|
#if defined(STM32F4) || defined(STM32F7)
|
|
.Mode = DMA_PFCTRL,
|
|
#elif defined(STM32G0) || defined(STM32G4) || defined(STM32L0) || defined(STM32L4) || defined(STM32WB)
|
|
.Mode = DMA_NORMAL,
|
|
#endif
|
|
.Priority = DMA_PRIORITY_VERY_HIGH,
|
|
#if defined(STM32F4) || defined(STM32F7)
|
|
.FIFOMode = DMA_FIFOMODE_ENABLE,
|
|
.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL,
|
|
.MemBurst = DMA_MBURST_INC4,
|
|
.PeriphBurst = DMA_PBURST_INC4,
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
#if defined(MICROPY_HW_ENABLE_DAC) && MICROPY_HW_ENABLE_DAC
|
|
// Default parameters to dma_init() for DAC tx
|
|
static const DMA_InitTypeDef dma_init_struct_dac = {
|
|
#if defined(STM32F4) || defined(STM32F7)
|
|
.Channel = 0,
|
|
#elif defined(STM32G0) || defined(STM32G4) || defined(STM32H7) || defined(STM32L0) || defined(STM32L4) || defined(STM32WB)
|
|
.Request = 0,
|
|
#endif
|
|
.Direction = 0,
|
|
.PeriphInc = DMA_PINC_DISABLE,
|
|
.MemInc = DMA_MINC_ENABLE,
|
|
.PeriphDataAlignment = DMA_PDATAALIGN_BYTE,
|
|
.MemDataAlignment = DMA_MDATAALIGN_BYTE,
|
|
.Mode = DMA_NORMAL,
|
|
.Priority = DMA_PRIORITY_HIGH,
|
|
#if defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
|
|
.FIFOMode = DMA_FIFOMODE_DISABLE,
|
|
.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL,
|
|
.MemBurst = DMA_MBURST_SINGLE,
|
|
.PeriphBurst = DMA_PBURST_SINGLE,
|
|
#endif
|
|
};
|
|
#endif
|
|
|
|
#if MICROPY_HW_ENABLE_DCMI
|
|
static const DMA_InitTypeDef dma_init_struct_dcmi = {
|
|
#if defined(STM32H7)
|
|
.Request = DMA_REQUEST_DCMI,
|
|
#else
|
|
.Channel = DMA_CHANNEL_1,
|
|
#endif
|
|
.Direction = DMA_PERIPH_TO_MEMORY,
|
|
.PeriphInc = DMA_PINC_DISABLE,
|
|
.MemInc = DMA_MINC_ENABLE,
|
|
.PeriphDataAlignment = DMA_PDATAALIGN_WORD,
|
|
.MemDataAlignment = DMA_MDATAALIGN_WORD,
|
|
.Mode = DMA_NORMAL,
|
|
.Priority = DMA_PRIORITY_HIGH,
|
|
.FIFOMode = DMA_FIFOMODE_ENABLE,
|
|
.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL,
|
|
.MemBurst = DMA_MBURST_INC4,
|
|
.PeriphBurst = DMA_PBURST_SINGLE
|
|
};
|
|
#endif
|
|
|
|
#if defined(STM32F0)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (7)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_channel) ((dma_channel) >> ((dma_channel >> 28) * 4))
|
|
|
|
#define DMA1_ENABLE_MASK (0x007f) // Bits in dma_enable_mask corresponding to DMA1 (7 channels)
|
|
#define DMA2_ENABLE_MASK (0x0f80) // Bits in dma_enable_mask corresponding to DMA2 (only 5 channels)
|
|
|
|
// DMA1 streams
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Channel3, HAL_DMA1_CH3_DAC_CH1, dma_id_2, &dma_init_struct_dac };
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Channel4, HAL_DMA1_CH4_DAC_CH2, dma_id_3, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel5, HAL_DMA1_CH5_SPI2_TX, dma_id_4, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel6, HAL_DMA1_CH6_SPI2_RX, dma_id_5, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_1_RX = { DMA2_Channel3, HAL_DMA2_CH3_SPI1_RX, dma_id_9, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_1_TX = { DMA2_Channel4, HAL_DMA2_CH4_SPI1_TX, dma_id_10, &dma_init_struct_spi_i2c};
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Ch1_IRQn,
|
|
DMA1_Ch2_3_DMA2_Ch1_2_IRQn,
|
|
DMA1_Ch2_3_DMA2_Ch1_2_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
|
|
DMA1_Ch2_3_DMA2_Ch1_2_IRQn,
|
|
DMA1_Ch2_3_DMA2_Ch1_2_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch3_5_IRQn,
|
|
0,
|
|
0,
|
|
};
|
|
|
|
#elif defined(STM32F4) || defined(STM32F7)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (8)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_channel) (((dma_channel) & DMA_SxCR_CHSEL) >> 25)
|
|
|
|
#define DMA1_ENABLE_MASK (0x00ff) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0xff00) // Bits in dma_enable_mask corresponding to DMA2
|
|
|
|
// These descriptors are ordered by DMAx_Stream number, and within a stream by channel
|
|
// number. The duplicate streams are ok as long as they aren't used at the same time.
|
|
//
|
|
// Currently I2C and SPI are synchronous and they call dma_init/dma_deinit
|
|
// around each transfer.
|
|
|
|
// DMA1 streams
|
|
const dma_descr_t dma_I2C_1_RX = { DMA1_Stream0, DMA_CHANNEL_1, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_3_RX = { DMA1_Stream2, DMA_CHANNEL_0, dma_id_2, &dma_init_struct_spi_i2c };
|
|
#if defined(STM32F7)
|
|
const dma_descr_t dma_I2C_4_RX = { DMA1_Stream2, DMA_CHANNEL_2, dma_id_2, &dma_init_struct_spi_i2c };
|
|
#endif
|
|
const dma_descr_t dma_I2C_3_RX = { DMA1_Stream2, DMA_CHANNEL_3, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_RX = { DMA1_Stream2, DMA_CHANNEL_7, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Stream3, DMA_CHANNEL_0, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Stream4, DMA_CHANNEL_0, dma_id_4, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_I2S
|
|
const dma_descr_t dma_I2S_2_RX = { DMA1_Stream3, DMA_CHANNEL_0, dma_id_3, &dma_init_struct_i2s };
|
|
const dma_descr_t dma_I2S_2_TX = { DMA1_Stream4, DMA_CHANNEL_0, dma_id_4, &dma_init_struct_i2s };
|
|
#endif
|
|
const dma_descr_t dma_I2C_3_TX = { DMA1_Stream4, DMA_CHANNEL_3, dma_id_4, &dma_init_struct_spi_i2c };
|
|
#if defined(STM32F7)
|
|
const dma_descr_t dma_I2C_4_TX = { DMA1_Stream5, DMA_CHANNEL_2, dma_id_5, &dma_init_struct_spi_i2c };
|
|
#endif
|
|
#if defined(MICROPY_HW_ENABLE_DAC) && MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Stream5, DMA_CHANNEL_7, dma_id_5, &dma_init_struct_dac };
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Stream6, DMA_CHANNEL_7, dma_id_6, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_3_TX = { DMA1_Stream7, DMA_CHANNEL_0, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Stream7, DMA_CHANNEL_1, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_TX = { DMA1_Stream7, DMA_CHANNEL_7, dma_id_7, &dma_init_struct_spi_i2c };
|
|
/* not preferred streams
|
|
const dma_descr_t dma_SPI_3_RX = { DMA1_Stream0, DMA_CHANNEL_0, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Stream6, DMA_CHANNEL_1, dma_id_6, &dma_init_struct_spi_i2c };
|
|
*/
|
|
|
|
// DMA2 streams
|
|
#if defined(STM32F7) && defined(SDMMC2) && ENABLE_SDIO
|
|
const dma_descr_t dma_SDMMC_2 = { DMA2_Stream0, DMA_CHANNEL_11, dma_id_8, &dma_init_struct_sdio };
|
|
#endif
|
|
#if MICROPY_HW_ENABLE_DCMI
|
|
const dma_descr_t dma_DCMI_0 = { DMA2_Stream1, DMA_CHANNEL_1, dma_id_9, &dma_init_struct_dcmi };
|
|
#endif
|
|
const dma_descr_t dma_SPI_1_RX = { DMA2_Stream2, DMA_CHANNEL_3, dma_id_10, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_I2S
|
|
const dma_descr_t dma_I2S_1_RX = { DMA2_Stream2, DMA_CHANNEL_3, dma_id_10, &dma_init_struct_i2s };
|
|
#endif
|
|
#if ENABLE_SDIO
|
|
const dma_descr_t dma_SDIO_0 = { DMA2_Stream3, DMA_CHANNEL_4, dma_id_11, &dma_init_struct_sdio };
|
|
#endif
|
|
#if !SDIO_NEEDS_EXCLUSIVE_DMA_ACCESS
|
|
const dma_descr_t dma_SPI_5_RX = { DMA2_Stream3, DMA_CHANNEL_2, dma_id_11, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_4_RX = { DMA2_Stream3, DMA_CHANNEL_5, dma_id_11, &dma_init_struct_spi_i2c };
|
|
#endif
|
|
const dma_descr_t dma_SPI_5_TX = { DMA2_Stream4, DMA_CHANNEL_2, dma_id_12, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_4_TX = { DMA2_Stream4, DMA_CHANNEL_5, dma_id_12, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_6_TX = { DMA2_Stream5, DMA_CHANNEL_1, dma_id_13, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_1_TX = { DMA2_Stream5, DMA_CHANNEL_3, dma_id_13, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_I2S
|
|
const dma_descr_t dma_I2S_1_TX = { DMA2_Stream5, DMA_CHANNEL_3, dma_id_13, &dma_init_struct_i2s };
|
|
#endif
|
|
// #if defined(STM32F7) && defined(SDMMC2) && ENABLE_SDIO
|
|
// const dma_descr_t dma_SDMMC_2 = { DMA2_Stream5, DMA_CHANNEL_11, dma_id_13, &dma_init_struct_sdio };
|
|
// #endif
|
|
const dma_descr_t dma_SPI_6_RX = { DMA2_Stream6, DMA_CHANNEL_1, dma_id_14, &dma_init_struct_spi_i2c };
|
|
// #if ENABLE_SDIO
|
|
// const dma_descr_t dma_SDIO_0 = { DMA2_Stream6, DMA_CHANNEL_4, dma_id_14, &dma_init_struct_sdio };
|
|
// #endif
|
|
/* not preferred streams
|
|
const dma_descr_t dma_SPI_1_TX = { DMA2_Stream3, DMA_CHANNEL_3, dma_id_11, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_1_RX = { DMA2_Stream0, DMA_CHANNEL_3, dma_id_8, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_4_RX = { DMA2_Stream0, DMA_CHANNEL_4, dma_id_8, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_4_TX = { DMA2_Stream1, DMA_CHANNEL_4, dma_id_9, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_5_RX = { DMA2_Stream5, DMA_CHANNEL_7, dma_id_13, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_5_TX = { DMA2_Stream6, DMA_CHANNEL_7, dma_id_14, &dma_init_struct_spi_i2c };
|
|
*/
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Stream0_IRQn,
|
|
DMA1_Stream1_IRQn,
|
|
DMA1_Stream2_IRQn,
|
|
DMA1_Stream3_IRQn,
|
|
DMA1_Stream4_IRQn,
|
|
DMA1_Stream5_IRQn,
|
|
DMA1_Stream6_IRQn,
|
|
DMA1_Stream7_IRQn,
|
|
DMA2_Stream0_IRQn,
|
|
DMA2_Stream1_IRQn,
|
|
DMA2_Stream2_IRQn,
|
|
DMA2_Stream3_IRQn,
|
|
DMA2_Stream4_IRQn,
|
|
DMA2_Stream5_IRQn,
|
|
DMA2_Stream6_IRQn,
|
|
DMA2_Stream7_IRQn,
|
|
};
|
|
|
|
#elif defined(STM32L0)
|
|
|
|
#define NCONTROLLERS (1)
|
|
#define NSTREAMS_PER_CONTROLLER (7)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_request) (dma_request)
|
|
|
|
#define DMA1_ENABLE_MASK (0x007f) // Bits in dma_enable_mask corresponding to DMA1
|
|
|
|
// These descriptors are ordered by DMAx_Channel number, and within a channel by request
|
|
// number. The duplicate streams are ok as long as they aren't used at the same time.
|
|
|
|
// DMA1 streams
|
|
const dma_descr_t dma_SPI_1_RX = { DMA1_Channel2, DMA_REQUEST_1, dma_id_1, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_TX = { DMA1_Channel2, DMA_REQUEST_14, dma_id_1, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Channel2, DMA_REQUEST_9, dma_id_1, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_1_TX = { DMA1_Channel3, DMA_REQUEST_1, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_RX = { DMA1_Channel3, DMA_REQUEST_14, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel4, DMA_REQUEST_2, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_TX = { DMA1_Channel4, DMA_REQUEST_7, dma_id_3, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Channel4, DMA_REQUEST_15, dma_id_3, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel5, DMA_REQUEST_2, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_RX = { DMA1_Channel5, DMA_REQUEST_7, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Channel6, DMA_REQUEST_6, dma_id_5, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_RX = { DMA1_Channel7, DMA_REQUEST_6, dma_id_6, &dma_init_struct_spi_i2c };
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Channel1_IRQn,
|
|
DMA1_Channel2_3_IRQn,
|
|
DMA1_Channel2_3_IRQn,
|
|
DMA1_Channel4_5_6_7_IRQn,
|
|
DMA1_Channel4_5_6_7_IRQn,
|
|
DMA1_Channel4_5_6_7_IRQn,
|
|
DMA1_Channel4_5_6_7_IRQn,
|
|
};
|
|
|
|
#elif defined(STM32L1)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (7)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_request) (dma_request)
|
|
|
|
#define DMA1_ENABLE_MASK (0x007f) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0x0f80) // Bits in dma_enable_mask corresponding to DMA2
|
|
|
|
// These descriptors are ordered by DMAx_Channel number, and within a channel by request
|
|
// number. The duplicate streams are ok as long as they aren't used at the same time.
|
|
|
|
// DMA1 streams
|
|
const dma_descr_t dma_SPI_1_RX = { DMA1_Channel2, 2, dma_id_1, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Channel2, 2, dma_id_1, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_1_TX = { DMA1_Channel3, 3, dma_id_2, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Channel3, 3, dma_id_2, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel4, 4, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_TX = { DMA1_Channel4, 4, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel5, 5, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_RX = { DMA1_Channel5, 5, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Channel6, 6, dma_id_5, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_RX = { DMA1_Channel7, 7, dma_id_6, &dma_init_struct_spi_i2c };
|
|
|
|
// DMA2 streams
|
|
const dma_descr_t dma_SPI_3_RX = { DMA2_Channel1, 3, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_3_TX = { DMA2_Channel2, 3, dma_id_8, &dma_init_struct_spi_i2c };
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Channel1_IRQn,
|
|
DMA1_Channel2_IRQn,
|
|
DMA1_Channel3_IRQn,
|
|
DMA1_Channel4_IRQn,
|
|
DMA1_Channel5_IRQn,
|
|
DMA1_Channel6_IRQn,
|
|
DMA1_Channel7_IRQn,
|
|
DMA2_Channel1_IRQn,
|
|
DMA2_Channel2_IRQn,
|
|
DMA2_Channel3_IRQn,
|
|
DMA2_Channel4_IRQn,
|
|
DMA2_Channel5_IRQn,
|
|
0,
|
|
0
|
|
};
|
|
|
|
#elif defined(STM32L4)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (7)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_request) (dma_request)
|
|
|
|
#define DMA1_ENABLE_MASK (0x007f) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0x3f80) // Bits in dma_enable_mask corresponding to DMA2
|
|
|
|
// These descriptors are ordered by DMAx_Channel number, and within a channel by request
|
|
// number. The duplicate streams are ok as long as they aren't used at the same time.
|
|
|
|
// DMA1 streams
|
|
// const dma_descr_t dma_ADC_1_RX = { DMA1_Channel1, DMA_REQUEST_0, dma_id_0, NULL }; // unused
|
|
// const dma_descr_t dma_ADC_2_RX = { DMA1_Channel2, DMA_REQUEST_0, dma_id_1, NULL }; // unused
|
|
const dma_descr_t dma_SPI_1_RX = { DMA1_Channel2, DMA_REQUEST_1, dma_id_1, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_TX = { DMA1_Channel2, DMA_REQUEST_3, dma_id_1, &dma_init_struct_spi_i2c };
|
|
// const dma_descr_t dma_ADC_3_RX = { DMA1_Channel3, DMA_REQUEST_0, dma_id_2, NULL }; // unused
|
|
const dma_descr_t dma_SPI_1_TX = { DMA1_Channel3, DMA_REQUEST_1, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_RX = { DMA1_Channel3, DMA_REQUEST_3, dma_id_2, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Channel3, DMA_REQUEST_6, dma_id_2, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel4, DMA_REQUEST_1, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_TX = { DMA1_Channel4, DMA_REQUEST_3, dma_id_3, &dma_init_struct_spi_i2c };
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Channel4, DMA_REQUEST_5, dma_id_3, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel5, DMA_REQUEST_1, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_RX = { DMA1_Channel5, DMA_REQUEST_3, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Channel6, DMA_REQUEST_3, dma_id_5, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_RX = { DMA1_Channel7, DMA_REQUEST_3, dma_id_6, &dma_init_struct_spi_i2c };
|
|
|
|
// DMA2 streams
|
|
const dma_descr_t dma_I2C_4_RX = { DMA2_Channel1, DMA_REQUEST_0, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_3_RX = { DMA2_Channel1, DMA_REQUEST_3, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_4_TX = { DMA2_Channel2, DMA_REQUEST_0, dma_id_1, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_3_TX = { DMA2_Channel2, DMA_REQUEST_3, dma_id_8, &dma_init_struct_spi_i2c };
|
|
/* not preferred streams
|
|
const dma_descr_t dma_ADC_1_RX = { DMA2_Channel3, DMA_REQUEST_0, dma_id_9, NULL };
|
|
const dma_descr_t dma_SPI_1_RX = { DMA2_Channel3, DMA_REQUEST_4, dma_id_9, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_ADC_2_RX = { DMA2_Channel4, DMA_REQUEST_0, dma_id_10, NULL };
|
|
const dma_descr_t dma_DAC_1_TX = { DMA2_Channel4, DMA_REQUEST_3, dma_id_10, &dma_init_struct_dac };
|
|
const dma_descr_t dma_SPI_1_TX = { DMA2_Channel4, DMA_REQUEST_4, dma_id_10, &dma_init_struct_spi_i2c };
|
|
*/
|
|
#if ENABLE_SDIO
|
|
const dma_descr_t dma_SDIO_0 = { DMA2_Channel4, DMA_REQUEST_7, dma_id_10, &dma_init_struct_sdio };
|
|
#endif
|
|
/* not preferred streams
|
|
const dma_descr_t dma_ADC_3_RX = { DMA2_Channel5, DMA_REQUEST_0, dma_id_11, NULL };
|
|
const dma_descr_t dma_DAC_2_TX = { DMA2_Channel5, DMA_REQUEST_3, dma_id_11, &dma_init_struct_dac };
|
|
const dma_descr_t dma_SDIO_0_TX= { DMA2_Channel5, DMA_REQUEST_7, dma_id_11, &dma_init_struct_sdio };
|
|
const dma_descr_t dma_I2C_1_RX = { DMA2_Channel6, DMA_REQUEST_5, dma_id_12, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA2_Channel7, DMA_REQUEST_5, dma_id_13, &dma_init_struct_spi_i2c };
|
|
*/
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Channel1_IRQn,
|
|
DMA1_Channel2_IRQn,
|
|
DMA1_Channel3_IRQn,
|
|
DMA1_Channel4_IRQn,
|
|
DMA1_Channel5_IRQn,
|
|
DMA1_Channel6_IRQn,
|
|
DMA1_Channel7_IRQn,
|
|
DMA2_Channel1_IRQn,
|
|
DMA2_Channel2_IRQn,
|
|
DMA2_Channel3_IRQn,
|
|
DMA2_Channel4_IRQn,
|
|
DMA2_Channel5_IRQn,
|
|
DMA2_Channel6_IRQn,
|
|
DMA2_Channel7_IRQn,
|
|
};
|
|
|
|
#elif defined(STM32WB) || defined(STM32WL)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (7)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_request) (dma_request)
|
|
|
|
#define DMA1_ENABLE_MASK (0x007f) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0x3f80) // Bits in dma_enable_mask corresponding to DMA2
|
|
|
|
// DMA1 streams
|
|
const dma_descr_t dma_SPI_1_RX = { DMA1_Channel1, DMA_REQUEST_SPI1_RX, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_1_TX = { DMA1_Channel2, DMA_REQUEST_SPI1_TX, dma_id_1, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel3, DMA_REQUEST_SPI2_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel4, DMA_REQUEST_SPI2_TX, dma_id_3, &dma_init_struct_spi_i2c };
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Channel1_IRQn,
|
|
DMA1_Channel2_IRQn,
|
|
DMA1_Channel3_IRQn,
|
|
DMA1_Channel4_IRQn,
|
|
DMA1_Channel5_IRQn,
|
|
DMA1_Channel6_IRQn,
|
|
DMA1_Channel7_IRQn,
|
|
DMA2_Channel1_IRQn,
|
|
DMA2_Channel2_IRQn,
|
|
DMA2_Channel3_IRQn,
|
|
DMA2_Channel4_IRQn,
|
|
DMA2_Channel5_IRQn,
|
|
DMA2_Channel6_IRQn,
|
|
DMA2_Channel7_IRQn,
|
|
};
|
|
|
|
#elif defined(STM32G0)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (7)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_request) (dma_request)
|
|
|
|
#define DMA1_ENABLE_MASK (0x007f) // Bits in dma_enable_mask corresponding to DMA1 (7 channels)
|
|
#define DMA2_ENABLE_MASK (0x0f80) // Bits in dma_enable_mask corresponding to DMA2 (only 5 channels)
|
|
|
|
// DMA1 streams
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Channel3, DMA_REQUEST_DAC1_CH1, dma_id_2, &dma_init_struct_dac };
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Channel4, DMA_REQUEST_DAC1_CH2, dma_id_3, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_3_TX = { DMA1_Channel7, DMA_REQUEST_SPI3_TX, dma_id_6, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_3_RX = { DMA2_Channel1, DMA_REQUEST_SPI3_RX, dma_id_7, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel5, DMA_REQUEST_SPI2_TX, dma_id_4, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel6, DMA_REQUEST_SPI2_RX, dma_id_5, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_1_RX = { DMA2_Channel3, DMA_REQUEST_SPI1_RX, dma_id_9, &dma_init_struct_spi_i2c};
|
|
const dma_descr_t dma_SPI_1_TX = { DMA2_Channel4, DMA_REQUEST_SPI1_TX, dma_id_10, &dma_init_struct_spi_i2c};
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Channel1_IRQn,
|
|
DMA1_Channel2_3_IRQn,
|
|
DMA1_Channel2_3_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn,
|
|
0,
|
|
0,
|
|
};
|
|
|
|
#elif defined(STM32G4)
|
|
|
|
#define NCONTROLLERS (2)
|
|
|
|
#if defined(STM32G431xx) || defined(STM32G441xx)
|
|
#define NSTREAMS_PER_CONTROLLER (6) // Cat 2 devices = 6, Cat 3 = 8
|
|
#else
|
|
#define NSTREAMS_PER_CONTROLLER (8) // Cat 2 devices = 6, Cat 3 = 8
|
|
#endif
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_request) (dma_request)
|
|
#if defined(STM32G431xx) || defined(STM32G441xx)
|
|
#define DMA1_ENABLE_MASK (0x004f) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0x0fc0) // Bits in dma_enable_mask corresponding to DMA2
|
|
#else
|
|
#define DMA1_ENABLE_MASK (0x00Ff) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0xff00) // Bits in dma_enable_mask corresponding to DMA2
|
|
#endif
|
|
|
|
// These descriptors are ordered by DMAx_Channel number, and within a channel by request
|
|
// number. The duplicate streams are ok as long as they aren't used at the same time.
|
|
|
|
// DMA1 streams
|
|
const dma_descr_t dma_SPI_1_RX = { DMA1_Channel1, DMA_REQUEST_SPI1_RX, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_1_TX = { DMA1_Channel2, DMA_REQUEST_SPI1_TX, dma_id_1, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Channel1, DMA_REQUEST_SPI2_RX, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Channel2, DMA_REQUEST_SPI2_TX, dma_id_1, &dma_init_struct_spi_i2c };
|
|
|
|
const dma_descr_t dma_I2C_1_RX = { DMA1_Channel3, DMA_REQUEST_I2C1_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Channel4, DMA_REQUEST_I2C1_TX, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_RX = { DMA1_Channel3, DMA_REQUEST_I2C2_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_TX = { DMA1_Channel4, DMA_REQUEST_I2C2_TX, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_RX = { DMA1_Channel3, DMA_REQUEST_I2C3_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_TX = { DMA1_Channel4, DMA_REQUEST_I2C3_TX, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_UART_3_RX = { DMA1_Channel3, DMA_REQUEST_USART3_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_UART_3_TX = { DMA1_Channel4, DMA_REQUEST_USART3_TX, dma_id_3, &dma_init_struct_spi_i2c };
|
|
|
|
#if MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Channel5, DMA_REQUEST_DAC1_CHANNEL1, dma_id_4, &dma_init_struct_dac };
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Channel6, DMA_REQUEST_DAC1_CHANNEL2, dma_id_5, &dma_init_struct_dac };
|
|
#endif
|
|
#if !defined(STM32G431xx) && !defined(STM32G441xx)
|
|
// channel 7 & 8
|
|
#endif
|
|
|
|
// DMA2 streams
|
|
const dma_descr_t dma_UART_1_RX = { DMA2_Channel1, DMA_REQUEST_USART1_RX, dma_id_6, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_UART_1_TX = { DMA2_Channel2, DMA_REQUEST_USART1_TX, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_LPUART_1_RX = { DMA2_Channel3, DMA_REQUEST_LPUART1_RX, dma_id_8, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_LPUART_1_TX = { DMA2_Channel4, DMA_REQUEST_LPUART1_TX, dma_id_9, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_ADC_1 = { DMA2_Channel5, DMA_REQUEST_ADC1, dma_id_10, NULL };
|
|
const dma_descr_t dma_MEM_2_MEM = { DMA2_Channel6, DMA_REQUEST_MEM2MEM, dma_id_11, NULL };
|
|
#if !defined(STM32G431xx) && !defined(STM32G441xx)
|
|
// channel 7 & 8
|
|
#endif
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Channel1_IRQn,
|
|
DMA1_Channel2_IRQn,
|
|
DMA1_Channel3_IRQn,
|
|
DMA1_Channel4_IRQn,
|
|
DMA1_Channel5_IRQn,
|
|
DMA1_Channel6_IRQn,
|
|
#if !defined(STM32G431xx) && !defined(STM32G441xx)
|
|
DMA1_Channel7_IRQn,
|
|
DMA1_Channel8_IRQn,
|
|
#endif
|
|
DMA2_Channel1_IRQn,
|
|
DMA2_Channel2_IRQn,
|
|
DMA2_Channel3_IRQn,
|
|
DMA2_Channel4_IRQn,
|
|
DMA2_Channel5_IRQn,
|
|
DMA2_Channel6_IRQn,
|
|
#if !defined(STM32G431xx) && !defined(STM32G441xx)
|
|
DMA2_Channel7_IRQn,
|
|
DMA2_Channel8_IRQn,
|
|
#endif
|
|
};
|
|
|
|
#elif defined(STM32H5)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (8)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_channel) (dma_channel)
|
|
|
|
#define DMA1_ENABLE_MASK (0x00ff) // Bits in dma_enable_mask corresponding to GPDMA1
|
|
#define DMA2_ENABLE_MASK (0xff00) // Bits in dma_enable_mask corresponding to GPDMA2
|
|
|
|
const dma_descr_t dma_SPI_2_RX = { GPDMA1_Channel0, GPDMA1_REQUEST_SPI2_RX, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_TX = { GPDMA1_Channel1, GPDMA1_REQUEST_SPI2_TX, dma_id_1, &dma_init_struct_spi_i2c };
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
GPDMA1_Channel0_IRQn,
|
|
GPDMA1_Channel1_IRQn,
|
|
GPDMA1_Channel2_IRQn,
|
|
GPDMA1_Channel3_IRQn,
|
|
GPDMA1_Channel4_IRQn,
|
|
GPDMA1_Channel5_IRQn,
|
|
GPDMA1_Channel6_IRQn,
|
|
GPDMA1_Channel7_IRQn,
|
|
GPDMA2_Channel0_IRQn,
|
|
GPDMA2_Channel1_IRQn,
|
|
GPDMA2_Channel2_IRQn,
|
|
GPDMA2_Channel3_IRQn,
|
|
GPDMA2_Channel4_IRQn,
|
|
GPDMA2_Channel5_IRQn,
|
|
GPDMA2_Channel6_IRQn,
|
|
GPDMA2_Channel7_IRQn,
|
|
};
|
|
|
|
#elif defined(STM32H7)
|
|
|
|
#define NCONTROLLERS (2)
|
|
#define NSTREAMS_PER_CONTROLLER (8)
|
|
#define NSTREAM (NCONTROLLERS * NSTREAMS_PER_CONTROLLER)
|
|
|
|
#define DMA_SUB_INSTANCE_AS_UINT8(dma_channel) (dma_channel)
|
|
|
|
#define DMA1_ENABLE_MASK (0x00ff) // Bits in dma_enable_mask corresponding to DMA1
|
|
#define DMA2_ENABLE_MASK (0xff00) // Bits in dma_enable_mask corresponding to DMA2
|
|
|
|
// These descriptors are ordered by DMAx_Stream number, and within a stream by channel
|
|
// number. The duplicate streams are ok as long as they aren't used at the same time.
|
|
//
|
|
// Currently I2C and SPI are synchronous and they call dma_init/dma_deinit
|
|
// around each transfer.
|
|
|
|
// DMA1 streams
|
|
const dma_descr_t dma_I2C_1_RX = { DMA1_Stream0, DMA_REQUEST_I2C1_RX, dma_id_0, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_3_RX = { DMA1_Stream2, DMA_REQUEST_SPI3_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_4_RX = { DMA1_Stream2, BDMA_REQUEST_I2C4_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_RX = { DMA1_Stream2, DMA_REQUEST_I2C3_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_RX = { DMA1_Stream2, DMA_REQUEST_I2C2_RX, dma_id_2, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_RX = { DMA1_Stream3, DMA_REQUEST_SPI2_RX, dma_id_3, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_2_TX = { DMA1_Stream4, DMA_REQUEST_SPI2_TX, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_3_TX = { DMA1_Stream4, DMA_REQUEST_I2C3_TX, dma_id_4, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_4_TX = { DMA1_Stream5, BDMA_REQUEST_I2C4_TX, dma_id_5, &dma_init_struct_spi_i2c };
|
|
#if defined(MICROPY_HW_ENABLE_DAC) && MICROPY_HW_ENABLE_DAC
|
|
const dma_descr_t dma_DAC_1_TX = { DMA1_Stream5, DMA_REQUEST_DAC1_CH1, dma_id_5, &dma_init_struct_dac };
|
|
const dma_descr_t dma_DAC_2_TX = { DMA1_Stream6, DMA_REQUEST_DAC1_CH2, dma_id_6, &dma_init_struct_dac };
|
|
#endif
|
|
const dma_descr_t dma_SPI_3_TX = { DMA1_Stream7, DMA_REQUEST_SPI3_TX, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_1_TX = { DMA1_Stream7, DMA_REQUEST_I2C1_TX, dma_id_7, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_I2C_2_TX = { DMA1_Stream7, DMA_REQUEST_I2C2_TX, dma_id_7, &dma_init_struct_spi_i2c };
|
|
|
|
// DMA2 streams
|
|
#if MICROPY_HW_ENABLE_DCMI
|
|
const dma_descr_t dma_DCMI_0 = { DMA2_Stream1, DMA_REQUEST_DCMI, dma_id_9, &dma_init_struct_dcmi };
|
|
#endif
|
|
const dma_descr_t dma_SPI_1_RX = { DMA2_Stream2, DMA_REQUEST_SPI1_RX, dma_id_10, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_5_RX = { DMA2_Stream3, DMA_REQUEST_SPI5_RX, dma_id_11, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_4_RX = { DMA2_Stream3, DMA_REQUEST_SPI4_RX, dma_id_11, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_5_TX = { DMA2_Stream4, DMA_REQUEST_SPI5_TX, dma_id_12, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_4_TX = { DMA2_Stream4, DMA_REQUEST_SPI4_TX, dma_id_12, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_6_TX = { DMA2_Stream5, BDMA_REQUEST_SPI6_TX, dma_id_13, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_1_TX = { DMA2_Stream5, DMA_REQUEST_SPI1_TX, dma_id_13, &dma_init_struct_spi_i2c };
|
|
const dma_descr_t dma_SPI_6_RX = { DMA2_Stream6, BDMA_REQUEST_SPI6_RX, dma_id_14, &dma_init_struct_spi_i2c };
|
|
|
|
static const uint8_t dma_irqn[NSTREAM] = {
|
|
DMA1_Stream0_IRQn,
|
|
DMA1_Stream1_IRQn,
|
|
DMA1_Stream2_IRQn,
|
|
DMA1_Stream3_IRQn,
|
|
DMA1_Stream4_IRQn,
|
|
DMA1_Stream5_IRQn,
|
|
DMA1_Stream6_IRQn,
|
|
DMA1_Stream7_IRQn,
|
|
DMA2_Stream0_IRQn,
|
|
DMA2_Stream1_IRQn,
|
|
DMA2_Stream2_IRQn,
|
|
DMA2_Stream3_IRQn,
|
|
DMA2_Stream4_IRQn,
|
|
DMA2_Stream5_IRQn,
|
|
DMA2_Stream6_IRQn,
|
|
DMA2_Stream7_IRQn,
|
|
};
|
|
|
|
#endif
|
|
|
|
static DMA_HandleTypeDef *dma_handle[NSTREAM] = {NULL};
|
|
static uint8_t dma_last_sub_instance[NSTREAM];
|
|
static volatile uint32_t dma_enable_mask = 0;
|
|
#if MICROPY_HW_DMA_ENABLE_AUTO_TURN_OFF
|
|
volatile dma_idle_count_t dma_idle;
|
|
#endif
|
|
|
|
#define DMA_INVALID_CHANNEL 0xff // Value stored in dma_last_channel which means invalid
|
|
|
|
#if defined(STM32F0) || defined(STM32G0) || defined(STM32L0) || defined(STM32L1)
|
|
#define DMA1_IS_CLK_ENABLED() ((RCC->AHBENR & RCC_AHBENR_DMA1EN) != 0)
|
|
#if defined(DMA2)
|
|
#define DMA2_IS_CLK_ENABLED() ((RCC->AHBENR & RCC_AHBENR_DMA2EN) != 0)
|
|
#endif
|
|
#elif defined(STM32H5)
|
|
#define DMA1_IS_CLK_ENABLED() (__HAL_RCC_GPDMA1_IS_CLK_ENABLED())
|
|
#define DMA2_IS_CLK_ENABLED() (__HAL_RCC_GPDMA2_IS_CLK_ENABLED())
|
|
#define __HAL_RCC_DMA1_CLK_ENABLE __HAL_RCC_GPDMA1_CLK_ENABLE
|
|
#define __HAL_RCC_DMA2_CLK_ENABLE __HAL_RCC_GPDMA2_CLK_ENABLE
|
|
#define __HAL_RCC_DMA1_CLK_DISABLE __HAL_RCC_GPDMA1_CLK_DISABLE
|
|
#define __HAL_RCC_DMA2_CLK_DISABLE __HAL_RCC_GPDMA2_CLK_DISABLE
|
|
#else
|
|
#define DMA1_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA1EN) != 0)
|
|
#define DMA2_IS_CLK_ENABLED() ((RCC->AHB1ENR & RCC_AHB1ENR_DMA2EN) != 0)
|
|
#endif
|
|
|
|
#if defined(STM32F0)
|
|
|
|
void DMA1_Ch1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Ch1_IRQn);
|
|
if (dma_handle[dma_id_0] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_0]);
|
|
}
|
|
}
|
|
|
|
void DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Ch2_3_DMA2_Ch1_2_IRQn);
|
|
if (dma_handle[dma_id_1] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_1]);
|
|
}
|
|
if (dma_handle[dma_id_2] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_2]);
|
|
}
|
|
if (dma_handle[dma_id_7] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_7]);
|
|
}
|
|
if (dma_handle[dma_id_8] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_8]);
|
|
}
|
|
IRQ_EXIT(DMA1_Ch2_3_DMA2_Ch1_2_IRQn);
|
|
}
|
|
|
|
void DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Ch4_7_DMA2_Ch3_5_IRQn);
|
|
for (unsigned int i = 0; i < 4; ++i) {
|
|
if (dma_handle[dma_id_3 + i] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_3 + i]);
|
|
}
|
|
// When i==3 this will check an invalid handle, but it will always be NULL
|
|
if (dma_handle[dma_id_9 + i] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_9 + i]);
|
|
}
|
|
}
|
|
IRQ_EXIT(DMA1_Ch4_7_DMA2_Ch3_5_IRQn);
|
|
}
|
|
|
|
#elif defined(STM32F4) || defined(STM32F7) || defined(STM32H7)
|
|
|
|
void DMA1_Stream0_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream0_IRQn);
|
|
if (dma_handle[dma_id_0] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_0]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream0_IRQn);
|
|
}
|
|
void DMA1_Stream1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream1_IRQn);
|
|
if (dma_handle[dma_id_1] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_1]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream1_IRQn);
|
|
}
|
|
void DMA1_Stream2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream2_IRQn);
|
|
if (dma_handle[dma_id_2] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_2]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream2_IRQn);
|
|
}
|
|
void DMA1_Stream3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream3_IRQn);
|
|
if (dma_handle[dma_id_3] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_3]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream3_IRQn);
|
|
}
|
|
void DMA1_Stream4_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream4_IRQn);
|
|
if (dma_handle[dma_id_4] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_4]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream4_IRQn);
|
|
}
|
|
void DMA1_Stream5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream5_IRQn);
|
|
if (dma_handle[dma_id_5] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_5]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream5_IRQn);
|
|
}
|
|
void DMA1_Stream6_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream6_IRQn);
|
|
if (dma_handle[dma_id_6] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_6]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream6_IRQn);
|
|
}
|
|
void DMA1_Stream7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Stream7_IRQn);
|
|
if (dma_handle[dma_id_7] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_7]);
|
|
}
|
|
IRQ_EXIT(DMA1_Stream7_IRQn);
|
|
}
|
|
void DMA2_Stream0_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream0_IRQn);
|
|
if (dma_handle[dma_id_8] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_8]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream0_IRQn);
|
|
}
|
|
void DMA2_Stream1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream1_IRQn);
|
|
if (dma_handle[dma_id_9] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_9]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream1_IRQn);
|
|
}
|
|
void DMA2_Stream2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream2_IRQn);
|
|
if (dma_handle[dma_id_10] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_10]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream2_IRQn);
|
|
}
|
|
void DMA2_Stream3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream3_IRQn);
|
|
if (dma_handle[dma_id_11] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_11]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream3_IRQn);
|
|
}
|
|
void DMA2_Stream4_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream4_IRQn);
|
|
if (dma_handle[dma_id_12] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_12]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream4_IRQn);
|
|
}
|
|
void DMA2_Stream5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream5_IRQn);
|
|
if (dma_handle[dma_id_13] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_13]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream5_IRQn);
|
|
}
|
|
void DMA2_Stream6_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream6_IRQn);
|
|
if (dma_handle[dma_id_14] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_14]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream6_IRQn);
|
|
}
|
|
void DMA2_Stream7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Stream7_IRQn);
|
|
if (dma_handle[dma_id_15] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_15]);
|
|
}
|
|
IRQ_EXIT(DMA2_Stream7_IRQn);
|
|
}
|
|
|
|
#elif defined(STM32G0)
|
|
|
|
void DMA1_Channel1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel1_IRQn);
|
|
if (dma_handle[dma_id_0] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_0]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel1_IRQn);
|
|
}
|
|
|
|
void DMA1_Channel2_3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel2_3_IRQn);
|
|
if (dma_handle[dma_id_1] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_1]);
|
|
}
|
|
if (dma_handle[dma_id_2] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_2]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel2_3_IRQn);
|
|
}
|
|
|
|
void DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn);
|
|
if (dma_handle[dma_id_3] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_3]);
|
|
}
|
|
if (dma_handle[dma_id_4] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_4]);
|
|
}
|
|
if (dma_handle[dma_id_5] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_5]);
|
|
}
|
|
if (dma_handle[dma_id_6] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_6]);
|
|
}
|
|
if (dma_handle[dma_id_7] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_7]);
|
|
}
|
|
if (dma_handle[dma_id_8] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_8]);
|
|
}
|
|
if (dma_handle[dma_id_9] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_9]);
|
|
}
|
|
if (dma_handle[dma_id_10] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_10]);
|
|
}
|
|
if (dma_handle[dma_id_11] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_11]);
|
|
}
|
|
IRQ_EXIT(DMA1_Ch4_7_DMA2_Ch1_5_DMAMUX1_OVR_IRQn);
|
|
}
|
|
|
|
#elif defined(STM32G4)
|
|
|
|
void DMA1_Channel1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel1_IRQn);
|
|
if (dma_handle[dma_id_0] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_0]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel1_IRQn);
|
|
}
|
|
void DMA1_Channel2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel2_IRQn);
|
|
if (dma_handle[dma_id_1] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_1]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel2_IRQn);
|
|
}
|
|
void DMA1_Channel3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel3_IRQn);
|
|
if (dma_handle[dma_id_2] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_2]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel3_IRQn);
|
|
}
|
|
void DMA1_Channel4_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel4_IRQn);
|
|
if (dma_handle[dma_id_3] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_3]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel4_IRQn);
|
|
}
|
|
void DMA1_Channel5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel5_IRQn);
|
|
if (dma_handle[dma_id_4] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_4]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel5_IRQn);
|
|
}
|
|
void DMA1_Channel6_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel6_IRQn);
|
|
if (dma_handle[dma_id_5] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_5]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel6_IRQn);
|
|
}
|
|
#if !(defined(STM32G431xx) || defined(STM32G441xx))
|
|
void DMA1_Channel7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel7_IRQn);
|
|
if (dma_handle[dma_id_12] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_12]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel7_IRQn);
|
|
}
|
|
void DMA1_Channel8_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel8_IRQn);
|
|
if (dma_handle[dma_id_13] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_13]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel8_IRQn);
|
|
}
|
|
#endif
|
|
void DMA2_Channel1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel1_IRQn);
|
|
if (dma_handle[dma_id_6] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_6]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel1_IRQn);
|
|
}
|
|
void DMA2_Channel2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel2_IRQn);
|
|
if (dma_handle[dma_id_7] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_7]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel2_IRQn);
|
|
}
|
|
void DMA2_Channel3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel3_IRQn);
|
|
if (dma_handle[dma_id_8] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_8]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel3_IRQn);
|
|
}
|
|
void DMA2_Channel4_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel4_IRQn);
|
|
if (dma_handle[dma_id_9] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_9]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel4_IRQn);
|
|
}
|
|
void DMA2_Channel5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel5_IRQn);
|
|
if (dma_handle[dma_id_10] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_10]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel5_IRQn);
|
|
}
|
|
void DMA2_Channel6_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel6_IRQn);
|
|
if (dma_handle[dma_id_11] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_11]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel6_IRQn);
|
|
}
|
|
#if !(defined(STM32G431xx) || defined(STM32G441xx))
|
|
void DMA2_Channel7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel7_IRQn);
|
|
if (dma_handle[dma_id_14] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_14]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel7_IRQn);
|
|
}
|
|
void DMA2_Channel8_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel8_IRQn);
|
|
if (dma_handle[dma_id_15] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_15]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel8_IRQn);
|
|
}
|
|
#endif
|
|
|
|
#elif defined(STM32H5)
|
|
|
|
#define DEFINE_IRQ_HANDLER(periph, channel, id) \
|
|
void GPDMA##periph##_Channel##channel##_IRQHandler(void) { \
|
|
IRQ_ENTER(GPDMA##periph##_Channel##channel##_IRQn); \
|
|
if (dma_handle[id] != NULL) { \
|
|
HAL_DMA_IRQHandler(dma_handle[id]); \
|
|
} \
|
|
IRQ_EXIT(GPDMA##periph##_Channel##channel##_IRQn); \
|
|
}
|
|
|
|
DEFINE_IRQ_HANDLER(1, 0, dma_id_0)
|
|
DEFINE_IRQ_HANDLER(1, 1, dma_id_1)
|
|
DEFINE_IRQ_HANDLER(1, 2, dma_id_2)
|
|
DEFINE_IRQ_HANDLER(1, 3, dma_id_3)
|
|
DEFINE_IRQ_HANDLER(1, 4, dma_id_4)
|
|
DEFINE_IRQ_HANDLER(1, 5, dma_id_5)
|
|
DEFINE_IRQ_HANDLER(1, 6, dma_id_6)
|
|
DEFINE_IRQ_HANDLER(1, 7, dma_id_7)
|
|
DEFINE_IRQ_HANDLER(2, 0, dma_id_8)
|
|
DEFINE_IRQ_HANDLER(2, 1, dma_id_9)
|
|
DEFINE_IRQ_HANDLER(2, 2, dma_id_10)
|
|
DEFINE_IRQ_HANDLER(2, 3, dma_id_11)
|
|
DEFINE_IRQ_HANDLER(2, 4, dma_id_12)
|
|
DEFINE_IRQ_HANDLER(2, 5, dma_id_13)
|
|
DEFINE_IRQ_HANDLER(2, 6, dma_id_14)
|
|
DEFINE_IRQ_HANDLER(2, 7, dma_id_15)
|
|
|
|
#elif defined(STM32L0)
|
|
|
|
void DMA1_Channel1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel1_IRQn);
|
|
if (dma_handle[dma_id_0] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_0]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel1_IRQn);
|
|
}
|
|
|
|
void DMA1_Channel2_3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel2_3_IRQn);
|
|
if (dma_handle[dma_id_1] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_1]);
|
|
}
|
|
if (dma_handle[dma_id_2] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_2]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel2_3_IRQn);
|
|
}
|
|
|
|
void DMA1_Channel4_5_6_7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel4_5_6_7_IRQn);
|
|
if (dma_handle[dma_id_3] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_3]);
|
|
}
|
|
if (dma_handle[dma_id_4] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_4]);
|
|
}
|
|
if (dma_handle[dma_id_5] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_5]);
|
|
}
|
|
if (dma_handle[dma_id_6] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_6]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel4_5_6_7_IRQn);
|
|
}
|
|
|
|
#elif defined(STM32L1) || defined(STM32L4) || defined(STM32WB)
|
|
|
|
void DMA1_Channel1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel1_IRQn);
|
|
if (dma_handle[dma_id_0] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_0]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel1_IRQn);
|
|
}
|
|
void DMA1_Channel2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel2_IRQn);
|
|
if (dma_handle[dma_id_1] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_1]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel2_IRQn);
|
|
}
|
|
void DMA1_Channel3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel3_IRQn);
|
|
if (dma_handle[dma_id_2] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_2]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel3_IRQn);
|
|
}
|
|
void DMA1_Channel4_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel4_IRQn);
|
|
if (dma_handle[dma_id_3] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_3]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel4_IRQn);
|
|
}
|
|
void DMA1_Channel5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel5_IRQn);
|
|
if (dma_handle[dma_id_4] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_4]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel5_IRQn);
|
|
}
|
|
void DMA1_Channel6_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel6_IRQn);
|
|
if (dma_handle[dma_id_5] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_5]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel6_IRQn);
|
|
}
|
|
void DMA1_Channel7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA1_Channel7_IRQn);
|
|
if (dma_handle[dma_id_6] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_6]);
|
|
}
|
|
IRQ_EXIT(DMA1_Channel7_IRQn);
|
|
}
|
|
void DMA2_Channel1_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel1_IRQn);
|
|
if (dma_handle[dma_id_7] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_7]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel1_IRQn);
|
|
}
|
|
void DMA2_Channel2_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel2_IRQn);
|
|
if (dma_handle[dma_id_8] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_8]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel2_IRQn);
|
|
}
|
|
void DMA2_Channel3_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel3_IRQn);
|
|
if (dma_handle[dma_id_9] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_9]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel3_IRQn);
|
|
}
|
|
void DMA2_Channel4_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel4_IRQn);
|
|
if (dma_handle[dma_id_10] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_10]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel4_IRQn);
|
|
}
|
|
void DMA2_Channel5_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel5_IRQn);
|
|
if (dma_handle[dma_id_11] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_11]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel5_IRQn);
|
|
}
|
|
#if !defined(STM32L1)
|
|
void DMA2_Channel6_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel6_IRQn);
|
|
if (dma_handle[dma_id_12] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_12]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel6_IRQn);
|
|
}
|
|
void DMA2_Channel7_IRQHandler(void) {
|
|
IRQ_ENTER(DMA2_Channel7_IRQn);
|
|
if (dma_handle[dma_id_13] != NULL) {
|
|
HAL_DMA_IRQHandler(dma_handle[dma_id_13]);
|
|
}
|
|
IRQ_EXIT(DMA2_Channel7_IRQn);
|
|
}
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#if MICROPY_HW_DMA_ENABLE_AUTO_TURN_OFF
|
|
static void dma_idle_handler(uint32_t tick);
|
|
|
|
// Resets the idle counter for the DMA controller associated with dma_id.
|
|
static void dma_tickle(dma_id_t dma_id) {
|
|
dma_idle.counter[(dma_id < NSTREAMS_PER_CONTROLLER) ? 0 : 1] = 1;
|
|
systick_enable_dispatch(SYSTICK_DISPATCH_DMA, dma_idle_handler);
|
|
}
|
|
#endif
|
|
|
|
static void dma_enable_clock(dma_id_t dma_id) {
|
|
// We don't want dma_tick_handler() to turn off the clock right after we
|
|
// enable it, so we need to mark the channel in use in an atomic fashion.
|
|
mp_uint_t irq_state = MICROPY_BEGIN_ATOMIC_SECTION();
|
|
uint32_t old_enable_mask = dma_enable_mask;
|
|
dma_enable_mask |= (1 << dma_id);
|
|
MICROPY_END_ATOMIC_SECTION(irq_state);
|
|
|
|
#if defined(STM32WB)
|
|
// This MCU has a DMAMUX peripheral which needs to be enabled to multiplex the channels.
|
|
if (!__HAL_RCC_DMAMUX1_IS_CLK_ENABLED()) {
|
|
__HAL_RCC_DMAMUX1_CLK_ENABLE();
|
|
}
|
|
#endif
|
|
|
|
if (dma_id < NSTREAMS_PER_CONTROLLER) {
|
|
if (((old_enable_mask & DMA1_ENABLE_MASK) == 0) && !DMA1_IS_CLK_ENABLED()) {
|
|
__HAL_RCC_DMA1_CLK_ENABLE();
|
|
#if defined(STM32G4)
|
|
__HAL_RCC_DMAMUX1_CLK_ENABLE();
|
|
#endif
|
|
|
|
// We just turned on the clock. This means that anything stored
|
|
// in dma_last_channel (for DMA1) needs to be invalidated.
|
|
|
|
for (int channel = 0; channel < NSTREAMS_PER_CONTROLLER; channel++) {
|
|
dma_last_sub_instance[channel] = DMA_INVALID_CHANNEL;
|
|
}
|
|
}
|
|
}
|
|
#if defined(DMA2) || defined(GPDMA2)
|
|
else {
|
|
if (((old_enable_mask & DMA2_ENABLE_MASK) == 0) && !DMA2_IS_CLK_ENABLED()) {
|
|
__HAL_RCC_DMA2_CLK_ENABLE();
|
|
|
|
#if defined(STM32G4)
|
|
__HAL_RCC_DMAMUX1_CLK_ENABLE();
|
|
#endif
|
|
// We just turned on the clock. This means that anything stored
|
|
// in dma_last_channel (for DMA2) needs to be invalidated.
|
|
|
|
for (int channel = NSTREAMS_PER_CONTROLLER; channel < NSTREAM; channel++) {
|
|
dma_last_sub_instance[channel] = DMA_INVALID_CHANNEL;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
static void dma_disable_clock(dma_id_t dma_id) {
|
|
// We just mark the clock as disabled here, but we don't actually disable it.
|
|
// We wait for the timer to expire first, which means that back-to-back
|
|
// transfers don't have to initialize as much.
|
|
#if MICROPY_HW_DMA_ENABLE_AUTO_TURN_OFF
|
|
dma_tickle(dma_id);
|
|
#endif
|
|
dma_enable_mask &= ~(1 << dma_id);
|
|
}
|
|
|
|
void dma_init_handle(DMA_HandleTypeDef *dma, const dma_descr_t *dma_descr, uint32_t dir, void *data) {
|
|
// initialise parameters
|
|
dma->Instance = dma_descr->instance;
|
|
dma->Init = *dma_descr->init;
|
|
dma->Init.Direction = dir;
|
|
#if defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32L0) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL)
|
|
dma->Init.Request = dma_descr->sub_instance;
|
|
#else
|
|
#if !defined(STM32F0) && !defined(STM32L1)
|
|
dma->Init.Channel = dma_descr->sub_instance;
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(STM32H5)
|
|
// Configure src/dest settings based on the DMA direction.
|
|
if (dir == DMA_MEMORY_TO_PERIPH) {
|
|
dma->Init.SrcInc = DMA_SINC_INCREMENTED;
|
|
dma->Init.DestInc = DMA_DINC_FIXED;
|
|
} else if (dir == DMA_PERIPH_TO_MEMORY) {
|
|
dma->Init.SrcInc = DMA_SINC_FIXED;
|
|
dma->Init.DestInc = DMA_DINC_INCREMENTED;
|
|
}
|
|
#endif
|
|
|
|
// half of __HAL_LINKDMA(data, xxx, *dma)
|
|
// caller must implement other half by doing: data->xxx = dma
|
|
dma->Parent = data;
|
|
}
|
|
|
|
void dma_init(DMA_HandleTypeDef *dma, const dma_descr_t *dma_descr, uint32_t dir, void *data) {
|
|
// Some drivers allocate the DMA_HandleTypeDef from the stack
|
|
// (i.e. dac, i2c, spi) and for those cases we need to clear the
|
|
// structure so we don't get random values from the stack)
|
|
memset(dma, 0, sizeof(*dma));
|
|
|
|
if (dma_descr != NULL) {
|
|
dma_id_t dma_id = dma_descr->id;
|
|
|
|
dma_init_handle(dma, dma_descr, dir, data);
|
|
// set global pointer for IRQ handler
|
|
dma_handle[dma_id] = dma;
|
|
|
|
dma_enable_clock(dma_id);
|
|
|
|
#if defined(STM32G0) || defined(STM32G4) || defined(STM32H5) || defined(STM32H7) || defined(STM32L0) || defined(STM32L1) || defined(STM32L4) || defined(STM32WB) || defined(STM32WL)
|
|
// Always reset and configure the H7 and G0/G4/H7/L0/L4/WB/WL DMA peripheral
|
|
// (dma->State is set to HAL_DMA_STATE_RESET by memset above)
|
|
// TODO: understand how L0/L4 DMA works so this is not needed
|
|
HAL_DMA_DeInit(dma);
|
|
dma->Parent = data; // HAL_DMA_DeInit may clear Parent, so set it again
|
|
HAL_DMA_Init(dma);
|
|
NVIC_SetPriority(IRQn_NONNEG(dma_irqn[dma_id]), IRQ_PRI_DMA);
|
|
#else
|
|
// if this stream was previously configured for this channel/request and direction then we
|
|
// can skip most of the initialisation
|
|
uint8_t sub_inst = DMA_SUB_INSTANCE_AS_UINT8(dma_descr->sub_instance) | (dir == DMA_PERIPH_TO_MEMORY) << 7;
|
|
if (dma_last_sub_instance[dma_id] != sub_inst) {
|
|
dma_last_sub_instance[dma_id] = sub_inst;
|
|
|
|
// reset and configure DMA peripheral
|
|
// (dma->State is set to HAL_DMA_STATE_RESET by memset above)
|
|
HAL_DMA_DeInit(dma);
|
|
HAL_DMA_Init(dma);
|
|
NVIC_SetPriority(IRQn_NONNEG(dma_irqn[dma_id]), IRQ_PRI_DMA);
|
|
#if defined(STM32F0)
|
|
if (dma->Instance < DMA2_Channel1) {
|
|
__HAL_DMA1_REMAP(dma_descr->sub_instance);
|
|
} else {
|
|
__HAL_DMA2_REMAP(dma_descr->sub_instance);
|
|
}
|
|
#endif
|
|
} else {
|
|
// only necessary initialization
|
|
dma->State = HAL_DMA_STATE_READY;
|
|
#if defined(STM32F0)
|
|
// These variables are used to access the relevant 4 bits in ISR and IFCR
|
|
if (dma_id < NSTREAMS_PER_CONTROLLER) {
|
|
dma->DmaBaseAddress = DMA1;
|
|
dma->ChannelIndex = dma_id * 4;
|
|
} else {
|
|
dma->DmaBaseAddress = DMA2;
|
|
dma->ChannelIndex = (dma_id - NSTREAMS_PER_CONTROLLER) * 4;
|
|
}
|
|
#elif defined(STM32F4) || defined(STM32F7)
|
|
// calculate DMA base address and bitshift to be used in IRQ handler
|
|
extern uint32_t DMA_CalcBaseAndBitshift(DMA_HandleTypeDef *hdma);
|
|
DMA_CalcBaseAndBitshift(dma);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
HAL_NVIC_EnableIRQ(dma_irqn[dma_id]);
|
|
}
|
|
}
|
|
|
|
void dma_deinit(const dma_descr_t *dma_descr) {
|
|
if (dma_descr != NULL) {
|
|
#if !defined(STM32F0)
|
|
HAL_NVIC_DisableIRQ(dma_irqn[dma_descr->id]);
|
|
#endif
|
|
dma_handle[dma_descr->id] = NULL;
|
|
|
|
dma_disable_clock(dma_descr->id);
|
|
}
|
|
}
|
|
|
|
void dma_invalidate_channel(const dma_descr_t *dma_descr) {
|
|
if (dma_descr != NULL) {
|
|
dma_id_t dma_id = dma_descr->id;
|
|
// Only compare the sub-instance, not the direction bit (MSB)
|
|
if ((dma_last_sub_instance[dma_id] & 0x7f) == DMA_SUB_INSTANCE_AS_UINT8(dma_descr->sub_instance)) {
|
|
dma_last_sub_instance[dma_id] = DMA_INVALID_CHANNEL;
|
|
}
|
|
}
|
|
}
|
|
|
|
#if MICROPY_HW_DMA_ENABLE_AUTO_TURN_OFF
|
|
// Called from the SysTick handler
|
|
// We use LSB of tick to select which controller to process
|
|
static void dma_idle_handler(uint32_t tick) {
|
|
if (!DMA_IDLE_ENABLED() || !DMA_IDLE_TICK(tick)) {
|
|
return;
|
|
}
|
|
|
|
static const uint32_t controller_mask[] = {
|
|
DMA1_ENABLE_MASK,
|
|
#if defined(DMA2) || defined(GPDMA2)
|
|
DMA2_ENABLE_MASK,
|
|
#endif
|
|
};
|
|
{
|
|
int controller = (tick >> DMA_SYSTICK_LOG2) & 1;
|
|
if (dma_idle.counter[controller] == 0) {
|
|
return;
|
|
}
|
|
if (++dma_idle.counter[controller] > DMA_IDLE_TICK_MAX) {
|
|
if ((dma_enable_mask & controller_mask[controller]) == 0) {
|
|
// Nothing is active and we've reached our idle timeout,
|
|
// Now we'll really disable the clock.
|
|
dma_idle.counter[controller] = 0;
|
|
if (controller == 0) {
|
|
__HAL_RCC_DMA1_CLK_DISABLE();
|
|
#if defined(STM32G4)
|
|
#if defined(DMA2) || defined(GPDMA2)
|
|
if (__HAL_RCC_DMA2_IS_CLK_DISABLED())
|
|
#endif
|
|
{
|
|
__HAL_RCC_DMAMUX1_CLK_DISABLE();
|
|
}
|
|
#endif
|
|
}
|
|
#if defined(DMA2) || defined(GPDMA2)
|
|
else {
|
|
__HAL_RCC_DMA2_CLK_DISABLE();
|
|
#if defined(STM32G4)
|
|
if (__HAL_RCC_DMA1_IS_CLK_DISABLED()) {
|
|
__HAL_RCC_DMAMUX1_CLK_DISABLE();
|
|
}
|
|
#endif
|
|
}
|
|
#endif
|
|
} else {
|
|
// Something is still active, but the counter never got
|
|
// reset, so we'll reset the counter here.
|
|
dma_idle.counter[controller] = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(STM32F0) || defined(STM32G4) || defined(STM32L0) || defined(STM32L1) || defined(STM32L4)
|
|
|
|
void dma_nohal_init(const dma_descr_t *descr, uint32_t config) {
|
|
DMA_Channel_TypeDef *dma = descr->instance;
|
|
|
|
// Enable the DMA peripheral
|
|
dma_enable_clock(descr->id);
|
|
|
|
// Set main configuration register
|
|
dma->CCR =
|
|
descr->init->Priority // PL
|
|
| descr->init->MemInc // MINC
|
|
| descr->init->PeriphInc // PINC
|
|
| config // MSIZE | PSIZE | CIRC | DIR
|
|
;
|
|
|
|
// Select channel that the DMA stream uses
|
|
#if defined(STM32F0)
|
|
if (dma < DMA2_Channel1) {
|
|
__HAL_DMA1_REMAP(descr->sub_instance);
|
|
} else {
|
|
__HAL_DMA2_REMAP(descr->sub_instance);
|
|
}
|
|
#elif defined(STM32G4)
|
|
uint32_t *dmamux_ctrl = (void *)(DMAMUX1_Channel0_BASE + 0x04 * descr->id);
|
|
*dmamux_ctrl = (*dmamux_ctrl & ~(0x7f)) | descr->sub_instance;
|
|
#elif defined(STM32L1)
|
|
#else
|
|
DMA_Request_TypeDef *dma_ctrl = (void *)(((uint32_t)dma & ~0xff) + (DMA1_CSELR_BASE - DMA1_BASE)); // DMA1_CSELR or DMA2_CSELR
|
|
uint32_t channel_number = (((uint32_t)dma & 0xff) - 0x08) / 20; // 0 through 6
|
|
uint32_t channel_pos = channel_number * 4;
|
|
dma_ctrl->CSELR = (dma_ctrl->CSELR & ~(0xf << channel_pos)) | (descr->sub_instance << channel_pos);
|
|
#endif
|
|
}
|
|
|
|
void dma_nohal_deinit(const dma_descr_t *descr) {
|
|
DMA_Channel_TypeDef *dma = descr->instance;
|
|
dma->CCR &= ~DMA_CCR_EN;
|
|
dma->CCR = 0;
|
|
dma->CNDTR = 0;
|
|
dma_deinit(descr);
|
|
}
|
|
|
|
void dma_nohal_start(const dma_descr_t *descr, uint32_t src_addr, uint32_t dst_addr, uint16_t len) {
|
|
DMA_Channel_TypeDef *dma = descr->instance;
|
|
dma->CNDTR = len;
|
|
dma->CPAR = dst_addr;
|
|
dma->CMAR = src_addr;
|
|
dma->CCR |= DMA_CCR_EN;
|
|
}
|
|
|
|
#elif defined(STM32G0) || defined(STM32H5) || defined(STM32WB) || defined(STM32WL)
|
|
|
|
// These functions are currently not implemented or needed for this MCU.
|
|
|
|
#else
|
|
|
|
void dma_nohal_init(const dma_descr_t *descr, uint32_t config) {
|
|
DMA_Stream_TypeDef *dma = descr->instance;
|
|
|
|
// Enable the DMA peripheral
|
|
dma_enable_clock(descr->id);
|
|
|
|
// Set main configuration register
|
|
const DMA_InitTypeDef *init = descr->init;
|
|
dma->CR =
|
|
descr->sub_instance // CHSEL
|
|
| init->MemBurst // MBURST
|
|
| init->PeriphBurst // PBURST
|
|
| init->Priority // PL
|
|
| init->MemInc // MINC
|
|
| init->PeriphInc // PINC
|
|
| config // MSIZE | PSIZE | CIRC | DIR
|
|
;
|
|
|
|
// Set FIFO control register
|
|
dma->FCR =
|
|
init->FIFOMode // DMDIS
|
|
| init->FIFOThreshold // FTH
|
|
;
|
|
|
|
#if defined(STM32H7)
|
|
// Configure DMAMUX
|
|
uint32_t request = descr->sub_instance & DMAMUX_CxCR_DMAREQ_ID;
|
|
if ((dma >= DMA1_Stream0 && dma <= DMA1_Stream7) || (dma >= DMA2_Stream0 && dma <= DMA2_Stream7)) {
|
|
// DMA1/2 channels 0 to 7 are hardwired to DMAMUX1 channels 0-15.
|
|
uint32_t stream = (((uint32_t)dma & 0xff) - 16) / 24 + ((dma >= DMA2_Stream0) ? 8 : 0);
|
|
// Set DMAMUX channel peripheral request.
|
|
((DMAMUX_Channel_TypeDef *)(((uint32_t)DMAMUX1_Channel0) + (stream * 4)))->CCR = request;
|
|
DMAMUX1_ChannelStatus->CFR = 1 << (stream & 0x1F);
|
|
// Configure DMAMUX request generator if needed.
|
|
if (request >= DMA_REQUEST_GENERATOR0 && request <= DMA_REQUEST_GENERATOR7) {
|
|
((DMAMUX_RequestGen_TypeDef *)(((uint32_t)DMAMUX1_RequestGenerator0) + ((request - 1) * 4)))->RGCR = 0;
|
|
DMAMUX1_RequestGenStatus->RGCFR = 1 << (request - 1);
|
|
}
|
|
#if ENABLE_BDMA // TODO: BDMA is Not currently supported by this driver.
|
|
} else if (dma >= BDMA_Channel0 && dma <= BDMA_Channel7) {
|
|
// BDMA channels 0 to 7 are hardwired to DMAMUX2 channels 0-7.
|
|
uint32_t stream = (((uint32_t)dma & 0xff) - 8) / 20;
|
|
// Set DMAMUX channel peripheral request.
|
|
((DMAMUX_Channel_TypeDef *)(((uint32_t)DMAMUX2_Channel0) + (stream * 4)))->CCR = request;
|
|
DMAMUX2_ChannelStatus->CFR = 1 << (stream & 0x1F);
|
|
// Configure DMAMUX request generator if needed.
|
|
if (request >= DMA_REQUEST_GENERATOR0 && request <= DMA_REQUEST_GENERATOR7) {
|
|
((DMAMUX_RequestGen_TypeDef *)(((uint32_t)DMAMUX2_RequestGenerator0) + ((request - 1) * 4)))->RGCR = 0;
|
|
DMAMUX2_RequestGenStatus->RGCFR = 1 << (request - 1);
|
|
}
|
|
#endif // ENABLE_BDMA
|
|
}
|
|
#endif // STM32H7
|
|
}
|
|
|
|
void dma_nohal_deinit(const dma_descr_t *descr) {
|
|
DMA_Stream_TypeDef *dma = descr->instance;
|
|
dma->CR &= ~DMA_SxCR_EN;
|
|
uint32_t t0 = mp_hal_ticks_ms();
|
|
while ((dma->CR & DMA_SxCR_EN) && mp_hal_ticks_ms() - t0 < 100) {
|
|
}
|
|
dma->CR = 0;
|
|
dma->NDTR = 0;
|
|
dma->FCR = 0x21;
|
|
dma_deinit(descr);
|
|
}
|
|
|
|
void dma_nohal_start(const dma_descr_t *descr, uint32_t src_addr, uint32_t dst_addr, uint16_t len) {
|
|
// Must clear all event flags for this stream before enabling it
|
|
DMA_TypeDef *dma_ctrl;
|
|
uint32_t ch = descr->id;
|
|
if (ch < NSTREAMS_PER_CONTROLLER) {
|
|
dma_ctrl = DMA1;
|
|
} else {
|
|
dma_ctrl = DMA2;
|
|
ch -= NSTREAMS_PER_CONTROLLER;
|
|
}
|
|
__IO uint32_t *ifcr;
|
|
if (ch <= 3) {
|
|
ifcr = &dma_ctrl->LIFCR;
|
|
} else {
|
|
ifcr = &dma_ctrl->HIFCR;
|
|
ch -= 4;
|
|
}
|
|
if (ch <= 1) {
|
|
ch = ch * 6;
|
|
} else {
|
|
ch = 4 + ch * 6;
|
|
}
|
|
*ifcr = 0x3d << ch;
|
|
|
|
// Configure and enable stream
|
|
DMA_Stream_TypeDef *dma = descr->instance;
|
|
dma->CR &= ~DMA_SxCR_DBM;
|
|
dma->NDTR = len;
|
|
dma->PAR = dst_addr;
|
|
dma->M0AR = src_addr;
|
|
dma->CR |= DMA_SxCR_EN;
|
|
}
|
|
|
|
#endif
|
|
|
|
#define DMA_ID_FROM_CONTROLLER_STREAM(c, s) ((s) + (c) * NSTREAMS_PER_CONTROLLER)
|
|
|
|
void dma_external_acquire(uint32_t controller, uint32_t stream) {
|
|
dma_enable_clock(DMA_ID_FROM_CONTROLLER_STREAM(controller, stream));
|
|
}
|
|
|
|
void dma_external_release(uint32_t controller, uint32_t stream) {
|
|
dma_disable_clock(DMA_ID_FROM_CONTROLLER_STREAM(controller, stream));
|
|
}
|