aa136b4d78
This allows sending arbitrary HCI commands and getting the response. The return value of the function is the status of the command. This is intended for debugging and not to be a part of the public API, and must be enabled via mpconfigboard.h. It's currently only implemented for NimBLE bindings. Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
502 lines
24 KiB
C
502 lines
24 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2018 Ayke van Laethem
|
|
* Copyright (c) 2019-2020 Jim Mussared
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#ifndef MICROPY_INCLUDED_EXTMOD_MODBLUETOOTH_H
|
|
#define MICROPY_INCLUDED_EXTMOD_MODBLUETOOTH_H
|
|
|
|
#include <stdbool.h>
|
|
|
|
#include "py/obj.h"
|
|
#include "py/objlist.h"
|
|
#include "py/ringbuf.h"
|
|
|
|
// Port specific configuration.
|
|
#ifndef MICROPY_PY_BLUETOOTH_RINGBUF_SIZE
|
|
#define MICROPY_PY_BLUETOOTH_RINGBUF_SIZE (128)
|
|
#endif
|
|
|
|
#ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
|
|
#define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (0)
|
|
#endif
|
|
|
|
#ifndef MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS
|
|
// This can be enabled if the BLE stack runs entirely in scheduler context
|
|
// and therefore is able to call directly into the VM to run Python callbacks.
|
|
#define MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS (0)
|
|
#endif
|
|
|
|
// A port can optionally enable support for L2CAP "Connection Oriented Channels".
|
|
#ifndef MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
|
|
#define MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS (0)
|
|
#endif
|
|
|
|
// A port can optionally enable support for pairing and bonding.
|
|
// Requires MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS.
|
|
#ifndef MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
#define MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING (0)
|
|
#endif
|
|
|
|
// Optionally enable support for the `hci_cmd` function allowing
|
|
// Python to directly low-level HCI commands.
|
|
#ifndef MICROPY_PY_BLUETOOTH_ENABLE_HCI_CMD
|
|
#define MICROPY_PY_BLUETOOTH_ENABLE_HCI_CMD (0)
|
|
#endif
|
|
|
|
// This is used to protect the ringbuffer.
|
|
// A port may no-op this if MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS is enabled.
|
|
#ifndef MICROPY_PY_BLUETOOTH_ENTER
|
|
#define MICROPY_PY_BLUETOOTH_ENTER mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
|
|
#define MICROPY_PY_BLUETOOTH_EXIT MICROPY_END_ATOMIC_SECTION(atomic_state);
|
|
#endif
|
|
|
|
// Common constants.
|
|
#ifndef MP_BLUETOOTH_DEFAULT_ATTR_LEN
|
|
#define MP_BLUETOOTH_DEFAULT_ATTR_LEN (20)
|
|
#endif
|
|
|
|
#define MP_BLUETOOTH_CCCB_LEN (2)
|
|
|
|
// Advertisement packet lengths
|
|
#define MP_BLUETOOTH_GAP_ADV_MAX_LEN (32)
|
|
|
|
// Basic characteristic/descriptor flags.
|
|
// These match the spec values for these flags so can be passed directly to the stack.
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_BROADCAST (0x0001)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_READ (0x0002)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_WRITE_NO_RESPONSE (0x0004)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_WRITE (0x0008)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_NOTIFY (0x0010)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_INDICATE (0x0020)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_AUTHENTICATED_SIGNED_WRITE (0x0040)
|
|
|
|
// TODO: NimBLE and BlueKitchen disagree on this one.
|
|
// #define MP_BLUETOOTH_CHARACTERISTIC_FLAG_RELIABLE_WRITE (0x0080)
|
|
|
|
// Extended flags for security and privacy.
|
|
// These match NimBLE but might require mapping in the bindings for other stacks.
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_AUX_WRITE (0x0100)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_READ_ENCRYPTED (0x0200)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_READ_AUTHENTICATED (0x0400)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_READ_AUTHORIZED (0x0800)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_WRITE_ENCRYPTED (0x1000)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_WRITE_AUTHENTICATED (0x2000)
|
|
#define MP_BLUETOOTH_CHARACTERISTIC_FLAG_WRITE_AUTHORIZED (0x4000)
|
|
|
|
// Return values from _IRQ_GATTS_READ_REQUEST.
|
|
#define MP_BLUETOOTH_GATTS_NO_ERROR (0x00)
|
|
#define MP_BLUETOOTH_GATTS_ERROR_READ_NOT_PERMITTED (0x02)
|
|
#define MP_BLUETOOTH_GATTS_ERROR_WRITE_NOT_PERMITTED (0x03)
|
|
#define MP_BLUETOOTH_GATTS_ERROR_INSUFFICIENT_AUTHENTICATION (0x05)
|
|
#define MP_BLUETOOTH_GATTS_ERROR_INSUFFICIENT_AUTHORIZATION (0x08)
|
|
#define MP_BLUETOOTH_GATTS_ERROR_INSUFFICIENT_ENCRYPTION (0x0f)
|
|
|
|
// For mp_bluetooth_gattc_write, the mode parameter
|
|
#define MP_BLUETOOTH_WRITE_MODE_NO_RESPONSE (0)
|
|
#define MP_BLUETOOTH_WRITE_MODE_WITH_RESPONSE (1)
|
|
|
|
// Type value also doubles as length.
|
|
#define MP_BLUETOOTH_UUID_TYPE_16 (2)
|
|
#define MP_BLUETOOTH_UUID_TYPE_32 (4)
|
|
#define MP_BLUETOOTH_UUID_TYPE_128 (16)
|
|
|
|
// Event codes for the IRQ handler.
|
|
#define MP_BLUETOOTH_IRQ_CENTRAL_CONNECT (1)
|
|
#define MP_BLUETOOTH_IRQ_CENTRAL_DISCONNECT (2)
|
|
#define MP_BLUETOOTH_IRQ_GATTS_WRITE (3)
|
|
#define MP_BLUETOOTH_IRQ_GATTS_READ_REQUEST (4)
|
|
#define MP_BLUETOOTH_IRQ_SCAN_RESULT (5)
|
|
#define MP_BLUETOOTH_IRQ_SCAN_DONE (6)
|
|
#define MP_BLUETOOTH_IRQ_PERIPHERAL_CONNECT (7)
|
|
#define MP_BLUETOOTH_IRQ_PERIPHERAL_DISCONNECT (8)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_SERVICE_RESULT (9)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_SERVICE_DONE (10)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_CHARACTERISTIC_RESULT (11)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_CHARACTERISTIC_DONE (12)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_DESCRIPTOR_RESULT (13)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_DESCRIPTOR_DONE (14)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_READ_RESULT (15)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_READ_DONE (16)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_WRITE_DONE (17)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_NOTIFY (18)
|
|
#define MP_BLUETOOTH_IRQ_GATTC_INDICATE (19)
|
|
#define MP_BLUETOOTH_IRQ_GATTS_INDICATE_DONE (20)
|
|
#define MP_BLUETOOTH_IRQ_MTU_EXCHANGED (21)
|
|
#define MP_BLUETOOTH_IRQ_L2CAP_ACCEPT (22)
|
|
#define MP_BLUETOOTH_IRQ_L2CAP_CONNECT (23)
|
|
#define MP_BLUETOOTH_IRQ_L2CAP_DISCONNECT (24)
|
|
#define MP_BLUETOOTH_IRQ_L2CAP_RECV (25)
|
|
#define MP_BLUETOOTH_IRQ_L2CAP_SEND_READY (26)
|
|
#define MP_BLUETOOTH_IRQ_CONNECTION_UPDATE (27)
|
|
#define MP_BLUETOOTH_IRQ_ENCRYPTION_UPDATE (28)
|
|
#define MP_BLUETOOTH_IRQ_GET_SECRET (29)
|
|
#define MP_BLUETOOTH_IRQ_SET_SECRET (30)
|
|
#define MP_BLUETOOTH_IRQ_PASSKEY_ACTION (31)
|
|
|
|
#define MP_BLUETOOTH_ADDRESS_MODE_PUBLIC (0)
|
|
#define MP_BLUETOOTH_ADDRESS_MODE_RANDOM (1)
|
|
#define MP_BLUETOOTH_ADDRESS_MODE_RPA (2)
|
|
#define MP_BLUETOOTH_ADDRESS_MODE_NRPA (3)
|
|
|
|
// These match the spec values, can be used directly by the stack.
|
|
#define MP_BLUETOOTH_IO_CAPABILITY_DISPLAY_ONLY (0)
|
|
#define MP_BLUETOOTH_IO_CAPABILITY_DISPLAY_YESNO (1)
|
|
#define MP_BLUETOOTH_IO_CAPABILITY_KEYBOARD_ONLY (2)
|
|
#define MP_BLUETOOTH_IO_CAPABILITY_NO_INPUT_OUTPUT (3)
|
|
#define MP_BLUETOOTH_IO_CAPABILITY_KEYBOARD_DISPLAY (4)
|
|
|
|
// These match NimBLE BLE_SM_IOACT_.
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_NONE (0)
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_INPUT (2)
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_DISPLAY (3)
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_NUMERIC_COMPARISON (4)
|
|
|
|
// These match NimBLE BLE_SM_IOACT_.
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_NONE (0)
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_INPUT (2)
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_DISPLAY (3)
|
|
#define MP_BLUETOOTH_PASSKEY_ACTION_NUMERIC_COMPARISON (4)
|
|
|
|
/*
|
|
These aren't included in the module for space reasons, but can be used
|
|
in your Python code if necessary.
|
|
|
|
from micropython import const
|
|
_IRQ_CENTRAL_CONNECT = const(1)
|
|
_IRQ_CENTRAL_DISCONNECT = const(2)
|
|
_IRQ_GATTS_WRITE = const(3)
|
|
_IRQ_GATTS_READ_REQUEST = const(4)
|
|
_IRQ_SCAN_RESULT = const(5)
|
|
_IRQ_SCAN_DONE = const(6)
|
|
_IRQ_PERIPHERAL_CONNECT = const(7)
|
|
_IRQ_PERIPHERAL_DISCONNECT = const(8)
|
|
_IRQ_GATTC_SERVICE_RESULT = const(9)
|
|
_IRQ_GATTC_SERVICE_DONE = const(10)
|
|
_IRQ_GATTC_CHARACTERISTIC_RESULT = const(11)
|
|
_IRQ_GATTC_CHARACTERISTIC_DONE = const(12)
|
|
_IRQ_GATTC_DESCRIPTOR_RESULT = const(13)
|
|
_IRQ_GATTC_DESCRIPTOR_DONE = const(14)
|
|
_IRQ_GATTC_READ_RESULT = const(15)
|
|
_IRQ_GATTC_READ_DONE = const(16)
|
|
_IRQ_GATTC_WRITE_DONE = const(17)
|
|
_IRQ_GATTC_NOTIFY = const(18)
|
|
_IRQ_GATTC_INDICATE = const(19)
|
|
_IRQ_GATTS_INDICATE_DONE = const(20)
|
|
_IRQ_MTU_EXCHANGED = const(21)
|
|
_IRQ_L2CAP_ACCEPT = const(22)
|
|
_IRQ_L2CAP_CONNECT = const(23)
|
|
_IRQ_L2CAP_DISCONNECT = const(24)
|
|
_IRQ_L2CAP_RECV = const(25)
|
|
_IRQ_L2CAP_SEND_READY = const(26)
|
|
_IRQ_CONNECTION_UPDATE = const(27)
|
|
_IRQ_ENCRYPTION_UPDATE = const(28)
|
|
_IRQ_GET_SECRET = const(29)
|
|
_IRQ_SET_SECRET = const(30)
|
|
_IRQ_PASSKEY_ACTION = const(31)
|
|
|
|
_FLAG_BROADCAST = const(0x0001)
|
|
_FLAG_READ = const(0x0002)
|
|
_FLAG_WRITE_NO_RESPONSE = const(0x0004)
|
|
_FLAG_WRITE = const(0x0008)
|
|
_FLAG_NOTIFY = const(0x0010)
|
|
_FLAG_INDICATE = const(0x0020)
|
|
_FLAG_AUTHENTICATED_SIGNED_WRITE = const(0x0040)
|
|
|
|
_FLAG_AUX_WRITE = const(0x0100)
|
|
_FLAG_READ_ENCRYPTED = const(0x0200)
|
|
_FLAG_READ_AUTHENTICATED = const(0x0400)
|
|
_FLAG_READ_AUTHORIZED = const(0x0800)
|
|
_FLAG_WRITE_ENCRYPTED = const(0x1000)
|
|
_FLAG_WRITE_AUTHENTICATED = const(0x2000)
|
|
_FLAG_WRITE_AUTHORIZED = const(0x4000)
|
|
|
|
_GATTS_NO_ERROR = const(0x00)
|
|
_GATTS_ERROR_READ_NOT_PERMITTED = const(0x02)
|
|
_GATTS_ERROR_WRITE_NOT_PERMITTED = const(0x03)
|
|
_GATTS_ERROR_INSUFFICIENT_AUTHENTICATION = const(0x05)
|
|
_GATTS_ERROR_INSUFFICIENT_AUTHORIZATION = const(0x08)
|
|
_GATTS_ERROR_INSUFFICIENT_ENCRYPTION = const(0x0f)
|
|
|
|
_IO_CAPABILITY_DISPLAY_ONLY = const(0)
|
|
_IO_CAPABILITY_DISPLAY_YESNO = const(1)
|
|
_IO_CAPABILITY_KEYBOARD_ONLY = const(2)
|
|
_IO_CAPABILITY_NO_INPUT_OUTPUT = const(3)
|
|
_IO_CAPABILITY_KEYBOARD_DISPLAY = const(4)
|
|
|
|
_PASSKEY_ACTION_NONE = const(0)
|
|
_PASSKEY_ACTION_INPUT = const(2)
|
|
_PASSKEY_ACTION_DISPLAY = const(3)
|
|
_PASSKEY_ACTION_NUMERIC_COMPARISON = const(4)
|
|
*/
|
|
|
|
// bluetooth.UUID type.
|
|
// Ports are expected to map this to their own internal UUID types.
|
|
// Internally the UUID data is little-endian, but the user should only
|
|
// ever see this if they use the buffer protocol, e.g. in order to
|
|
// construct an advertising payload (which needs to be in LE).
|
|
// Both the constructor and the print function work in BE.
|
|
typedef struct {
|
|
mp_obj_base_t base;
|
|
uint8_t type;
|
|
uint8_t data[16];
|
|
} mp_obj_bluetooth_uuid_t;
|
|
|
|
extern const mp_obj_type_t mp_type_bluetooth_uuid;
|
|
|
|
//////////////////////////////////////////////////////////////
|
|
// API implemented by ports (i.e. called from modbluetooth.c):
|
|
|
|
// TODO: At the moment this only allows for a single `Bluetooth` instance to be created.
|
|
// Ideally in the future we'd be able to have multiple instances or to select a specific BT driver or HCI UART.
|
|
// So these global methods should be replaced with a struct of function pointers (like the machine.I2C implementations).
|
|
|
|
// Any method returning an int returns errno on failure, otherwise zero.
|
|
|
|
// Note: All methods dealing with addresses (as 6-byte uint8 pointers) are in big-endian format.
|
|
// (i.e. the same way they would be printed on a device sticker or in a UI), so the user sees
|
|
// addresses in a way that looks like what they'd expect.
|
|
// This means that the lower level implementation will likely need to reorder them (e.g. Nimble
|
|
// works in little-endian, as does BLE itself).
|
|
|
|
// Enables the Bluetooth stack.
|
|
int mp_bluetooth_init(void);
|
|
|
|
// Disables the Bluetooth stack. Is a no-op when not enabled.
|
|
void mp_bluetooth_deinit(void);
|
|
|
|
// Returns true when the Bluetooth stack is active.
|
|
bool mp_bluetooth_is_active(void);
|
|
|
|
// Gets the current address of this device in big-endian format.
|
|
void mp_bluetooth_get_current_address(uint8_t *addr_type, uint8_t *addr);
|
|
|
|
// Sets the addressing mode to use.
|
|
void mp_bluetooth_set_address_mode(uint8_t addr_mode);
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
// Set bonding flag in pairing requests (i.e. persist security keys).
|
|
void mp_bluetooth_set_bonding(bool enabled);
|
|
// Require MITM protection.
|
|
void mp_bluetooth_set_mitm_protection(bool enabled);
|
|
// Require LE Secure pairing (rather than Legacy Pairing)
|
|
void mp_bluetooth_set_le_secure(bool enabled);
|
|
// I/O capabilities for authentication (see MP_BLUETOOTH_IO_CAPABILITY_*).
|
|
void mp_bluetooth_set_io_capability(uint8_t capability);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
|
|
// Get or set the GAP device name that will be used by service 0x1800, characteristic 0x2a00.
|
|
size_t mp_bluetooth_gap_get_device_name(const uint8_t **buf);
|
|
int mp_bluetooth_gap_set_device_name(const uint8_t *buf, size_t len);
|
|
|
|
// Start advertisement. Will re-start advertisement when already enabled.
|
|
// Returns errno on failure.
|
|
int mp_bluetooth_gap_advertise_start(bool connectable, int32_t interval_us, const uint8_t *adv_data, size_t adv_data_len, const uint8_t *sr_data, size_t sr_data_len);
|
|
|
|
// Stop advertisement. No-op when already stopped.
|
|
void mp_bluetooth_gap_advertise_stop(void);
|
|
|
|
// Start adding services. Must be called before mp_bluetooth_register_service.
|
|
int mp_bluetooth_gatts_register_service_begin(bool append);
|
|
// Add a service with the given list of characteristics to the queue to be registered.
|
|
// The value_handles won't be valid until after mp_bluetooth_register_service_end is called.
|
|
int mp_bluetooth_gatts_register_service(mp_obj_bluetooth_uuid_t *service_uuid, mp_obj_bluetooth_uuid_t **characteristic_uuids, uint16_t *characteristic_flags, mp_obj_bluetooth_uuid_t **descriptor_uuids, uint16_t *descriptor_flags, uint8_t *num_descriptors, uint16_t *handles, size_t num_characteristics);
|
|
// Register any queued services.
|
|
int mp_bluetooth_gatts_register_service_end(void);
|
|
|
|
// Read the value from the local gatts db (likely this has been written by a central).
|
|
int mp_bluetooth_gatts_read(uint16_t value_handle, uint8_t **value, size_t *value_len);
|
|
// Write a value to the local gatts db (ready to be queried by a central).
|
|
int mp_bluetooth_gatts_write(uint16_t value_handle, const uint8_t *value, size_t value_len);
|
|
// Notify the central that it should do a read.
|
|
int mp_bluetooth_gatts_notify(uint16_t conn_handle, uint16_t value_handle);
|
|
// Notify the central, including a data payload. (Note: does not set the gatts db value).
|
|
int mp_bluetooth_gatts_notify_send(uint16_t conn_handle, uint16_t value_handle, const uint8_t *value, size_t value_len);
|
|
// Indicate the central.
|
|
int mp_bluetooth_gatts_indicate(uint16_t conn_handle, uint16_t value_handle);
|
|
|
|
// Resize and enable/disable append-mode on a value.
|
|
// Append-mode means that remote writes will append and local reads will clear after reading.
|
|
int mp_bluetooth_gatts_set_buffer(uint16_t value_handle, size_t len, bool append);
|
|
|
|
// Disconnect from a central or peripheral.
|
|
int mp_bluetooth_gap_disconnect(uint16_t conn_handle);
|
|
|
|
// Set/get the MTU that we will respond to a MTU exchange with.
|
|
int mp_bluetooth_get_preferred_mtu(void);
|
|
int mp_bluetooth_set_preferred_mtu(uint16_t mtu);
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
// Initiate pairing on the specified connection.
|
|
int mp_bluetooth_gap_pair(uint16_t conn_handle);
|
|
|
|
// Respond to a pairing request.
|
|
int mp_bluetooth_gap_passkey(uint16_t conn_handle, uint8_t action, mp_int_t passkey);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
|
|
// Start a discovery (scan). Set duration to zero to run continuously.
|
|
int mp_bluetooth_gap_scan_start(int32_t duration_ms, int32_t interval_us, int32_t window_us, bool active_scan);
|
|
|
|
// Stop discovery (if currently active).
|
|
int mp_bluetooth_gap_scan_stop(void);
|
|
|
|
// Connect to a found peripheral.
|
|
int mp_bluetooth_gap_peripheral_connect(uint8_t addr_type, const uint8_t *addr, int32_t duration_ms);
|
|
|
|
// Find all primary services on the connected peripheral.
|
|
int mp_bluetooth_gattc_discover_primary_services(uint16_t conn_handle, const mp_obj_bluetooth_uuid_t *uuid);
|
|
|
|
// Find all characteristics on the specified service on a connected peripheral.
|
|
int mp_bluetooth_gattc_discover_characteristics(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle, const mp_obj_bluetooth_uuid_t *uuid);
|
|
|
|
// Find all descriptors on the specified characteristic on a connected peripheral.
|
|
int mp_bluetooth_gattc_discover_descriptors(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle);
|
|
|
|
// Initiate read of a value from the remote peripheral.
|
|
int mp_bluetooth_gattc_read(uint16_t conn_handle, uint16_t value_handle);
|
|
|
|
// Write the value to the remote peripheral.
|
|
int mp_bluetooth_gattc_write(uint16_t conn_handle, uint16_t value_handle, const uint8_t *value, size_t *value_len, unsigned int mode);
|
|
|
|
// Initiate MTU exchange for a specific connection using the preferred MTU.
|
|
int mp_bluetooth_gattc_exchange_mtu(uint16_t conn_handle);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
|
|
int mp_bluetooth_l2cap_listen(uint16_t psm, uint16_t mtu);
|
|
int mp_bluetooth_l2cap_connect(uint16_t conn_handle, uint16_t psm, uint16_t mtu);
|
|
int mp_bluetooth_l2cap_disconnect(uint16_t conn_handle, uint16_t cid);
|
|
int mp_bluetooth_l2cap_send(uint16_t conn_handle, uint16_t cid, const uint8_t *buf, size_t len, bool *stalled);
|
|
int mp_bluetooth_l2cap_recvinto(uint16_t conn_handle, uint16_t cid, uint8_t *buf, size_t *len);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_HCI_CMD
|
|
int mp_bluetooth_hci_cmd(uint16_t ogf, uint16_t ocf, const uint8_t *req, size_t req_len, uint8_t *resp, size_t resp_len, uint8_t *status);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_HCI_CMD
|
|
|
|
/////////////////////////////////////////////////////////////////////////////
|
|
// API implemented by modbluetooth (called by port-specific implementations):
|
|
|
|
// Notify modbluetooth that a connection/disconnection event has occurred.
|
|
void mp_bluetooth_gap_on_connected_disconnected(uint8_t event, uint16_t conn_handle, uint8_t addr_type, const uint8_t *addr);
|
|
|
|
// Call this when any connection parameters have been changed.
|
|
void mp_bluetooth_gap_on_connection_update(uint16_t conn_handle, uint16_t conn_interval, uint16_t conn_latency, uint16_t supervision_timeout, uint16_t status);
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
// Call this when any connection encryption has been changed (e.g. during pairing).
|
|
void mp_bluetooth_gatts_on_encryption_update(uint16_t conn_handle, bool encrypted, bool authenticated, bool bonded, uint8_t key_size);
|
|
|
|
// Call this when you need the application to manage persistent key data.
|
|
// For get, if key is NULL, then the implementation must return the index'th matching key. Otherwise it should return a specific key.
|
|
// For set, if value is NULL, then delete.
|
|
// The "type" is stack-specific, but could also be used to implement versioning.
|
|
bool mp_bluetooth_gap_on_get_secret(uint8_t type, uint8_t index, const uint8_t *key, size_t key_len, const uint8_t **value, size_t *value_len);
|
|
bool mp_bluetooth_gap_on_set_secret(uint8_t type, const uint8_t *key, size_t key_len, const uint8_t *value, size_t value_len);
|
|
|
|
// Call this when a passkey verification needs to be processed.
|
|
void mp_bluetooth_gap_on_passkey_action(uint16_t conn_handle, uint8_t action, mp_int_t passkey);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_PAIRING_BONDING
|
|
|
|
// Call this when a characteristic is written to.
|
|
void mp_bluetooth_gatts_on_write(uint16_t conn_handle, uint16_t value_handle);
|
|
|
|
// Call this when an acknowledgment is received for an indication.
|
|
void mp_bluetooth_gatts_on_indicate_complete(uint16_t conn_handle, uint16_t value_handle, uint8_t status);
|
|
|
|
// Call this when a characteristic is read from (giving the handler a chance to update the stored value).
|
|
// Return 0 to allow the read, otherwise a non-zero rejection reason (see MP_BLUETOOTH_GATTS_ERROR_*).
|
|
mp_int_t mp_bluetooth_gatts_on_read_request(uint16_t conn_handle, uint16_t value_handle);
|
|
|
|
// Call this when an MTU exchange completes.
|
|
void mp_bluetooth_gatts_on_mtu_exchanged(uint16_t conn_handle, uint16_t value);
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
|
|
// Notify modbluetooth that scan has finished, either timeout, manually, or by some other action (e.g. connecting).
|
|
void mp_bluetooth_gap_on_scan_complete(void);
|
|
|
|
// Notify modbluetooth of a scan result.
|
|
void mp_bluetooth_gap_on_scan_result(uint8_t addr_type, const uint8_t *addr, uint8_t adv_type, const int8_t rssi, const uint8_t *data, size_t data_len);
|
|
|
|
// Notify modbluetooth that a service was found (either by discover-all, or discover-by-uuid).
|
|
void mp_bluetooth_gattc_on_primary_service_result(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle, mp_obj_bluetooth_uuid_t *service_uuid);
|
|
|
|
// Notify modbluetooth that a characteristic was found (either by discover-all-on-service, or discover-by-uuid-on-service).
|
|
void mp_bluetooth_gattc_on_characteristic_result(uint16_t conn_handle, uint16_t def_handle, uint16_t value_handle, uint8_t properties, mp_obj_bluetooth_uuid_t *characteristic_uuid);
|
|
|
|
// Notify modbluetooth that a descriptor was found.
|
|
void mp_bluetooth_gattc_on_descriptor_result(uint16_t conn_handle, uint16_t handle, mp_obj_bluetooth_uuid_t *descriptor_uuid);
|
|
|
|
// Notify modbluetooth that service, characteristic or descriptor discovery has finished.
|
|
void mp_bluetooth_gattc_on_discover_complete(uint8_t event, uint16_t conn_handle, uint16_t status);
|
|
|
|
// Notify modbluetooth that a read has completed with data (or notify/indicate data available, use `event` to disambiguate).
|
|
void mp_bluetooth_gattc_on_data_available(uint8_t event, uint16_t conn_handle, uint16_t value_handle, const uint8_t **data, uint16_t *data_len, size_t num);
|
|
|
|
// Notify modbluetooth that a read or write operation has completed.
|
|
void mp_bluetooth_gattc_on_read_write_status(uint8_t event, uint16_t conn_handle, uint16_t value_handle, uint16_t status);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
|
|
|
|
#if MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
|
|
mp_int_t mp_bluetooth_gattc_on_l2cap_accept(uint16_t conn_handle, uint16_t cid, uint16_t psm, uint16_t our_mtu, uint16_t peer_mtu);
|
|
void mp_bluetooth_gattc_on_l2cap_connect(uint16_t conn_handle, uint16_t cid, uint16_t psm, uint16_t our_mtu, uint16_t peer_mtu);
|
|
void mp_bluetooth_gattc_on_l2cap_disconnect(uint16_t conn_handle, uint16_t cid, uint16_t psm, uint16_t status);
|
|
void mp_bluetooth_gattc_on_l2cap_send_ready(uint16_t conn_handle, uint16_t cid, uint8_t status);
|
|
void mp_bluetooth_gattc_on_l2cap_recv(uint16_t conn_handle, uint16_t cid);
|
|
#endif // MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
|
|
|
|
// For stacks that don't manage attribute value data (currently all of them), helpers
|
|
// to store this in a map, keyed by value handle.
|
|
|
|
typedef struct {
|
|
// Pointer to heap-allocated data.
|
|
uint8_t *data;
|
|
// Allocated size of data.
|
|
size_t data_alloc;
|
|
// Current bytes in use.
|
|
size_t data_len;
|
|
// Whether new writes append or replace existing data (default false).
|
|
bool append;
|
|
} mp_bluetooth_gatts_db_entry_t;
|
|
|
|
typedef mp_map_t *mp_gatts_db_t;
|
|
|
|
STATIC inline void mp_bluetooth_gatts_db_create(mp_gatts_db_t *db) {
|
|
*db = m_new(mp_map_t, 1);
|
|
}
|
|
|
|
STATIC inline void mp_bluetooth_gatts_db_reset(mp_gatts_db_t db) {
|
|
mp_map_init(db, 0);
|
|
}
|
|
|
|
void mp_bluetooth_gatts_db_create_entry(mp_gatts_db_t db, uint16_t handle, size_t len);
|
|
mp_bluetooth_gatts_db_entry_t *mp_bluetooth_gatts_db_lookup(mp_gatts_db_t db, uint16_t handle);
|
|
int mp_bluetooth_gatts_db_read(mp_gatts_db_t db, uint16_t handle, uint8_t **value, size_t *value_len);
|
|
int mp_bluetooth_gatts_db_write(mp_gatts_db_t db, uint16_t handle, const uint8_t *value, size_t value_len);
|
|
int mp_bluetooth_gatts_db_resize(mp_gatts_db_t db, uint16_t handle, size_t len, bool append);
|
|
|
|
#endif // MICROPY_INCLUDED_EXTMOD_MODBLUETOOTH_H
|