a9dc31a881
This adds a script to generate the peripherals files (except clock). It adds support for the 1015, 1020, 1040, and 1050 EVKs. Some work was started on 1176 but it isn't working. So, the board def is in a separate branch. Fixes #3521. Fixes #2477.
28 lines
1.1 KiB
C
28 lines
1.1 KiB
C
#define MICROPY_HW_BOARD_NAME "iMX RT 1050 EVKB"
|
|
#define MICROPY_HW_MCU_NAME "IMXRT1052DVL6B"
|
|
|
|
// If you change this, then make sure to update the linker scripts as well to
|
|
// make sure you don't overwrite code
|
|
#define CIRCUITPY_INTERNAL_NVM_SIZE 0
|
|
|
|
// This uses the QSPI Flash. You'll need to modify the board to access it. See
|
|
// AN12108 for instructions. https://www.nxp.com/docs/en/application-note/AN12108.pdf
|
|
// JLinkGDBServer -if SWD -device "MIMXRT1052xxx6B?BankAddr=0x60000000&Loader=QSPI"
|
|
#define BOARD_FLASH_SIZE (8 * 1024 * 1024)
|
|
|
|
#define MICROPY_HW_LED_STATUS (&pin_GPIO_AD_B0_09)
|
|
#define MICROPY_HW_LED_STATUS_INVERTED (1)
|
|
|
|
#define DEFAULT_I2C_BUS_SCL (&pin_GPIO_AD_B1_00)
|
|
#define DEFAULT_I2C_BUS_SDA (&pin_GPIO_AD_B1_01)
|
|
|
|
#define DEFAULT_UART_BUS_RX (&pin_GPIO_AD_B1_07)
|
|
#define DEFAULT_UART_BUS_TX (&pin_GPIO_AD_B1_06)
|
|
|
|
#define CIRCUITPY_CONSOLE_UART_TX (&pin_GPIO_AD_B0_12)
|
|
#define CIRCUITPY_CONSOLE_UART_RX (&pin_GPIO_AD_B0_13)
|
|
|
|
// Put host on the second USB so that the device connection powers the board.
|
|
#define CIRCUITPY_USB_DEVICE_INSTANCE 0
|
|
#define CIRCUITPY_USB_HOST_INSTANCE 1
|