circuitpython/ports/stm32/Makefile

603 lines
16 KiB
Makefile

# Select the board to build for: if not given on the command line,
# then default to PYBV10.
BOARD ?= PYBV10
# If the build directory is not given, make it reflect the board name.
BUILD ?= build-$(BOARD)
BOARD_DIR ?= boards/$(BOARD)
ifeq ($(wildcard $(BOARD_DIR)/.),)
$(error Invalid BOARD specified: $(BOARD_DIR))
endif
include ../../py/mkenv.mk
-include mpconfigport.mk
include $(BOARD_DIR)/mpconfigboard.mk
# qstr definitions (must come before including py.mk)
QSTR_DEFS = qstrdefsport.h $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
QSTR_GLOBAL_DEPENDENCIES = mpconfigboard_common.h $(BOARD_DIR)/mpconfigboard.h
# directory containing scripts to be frozen as bytecode
FROZEN_MPY_DIR ?= modules
# include py core make definitions
include $(TOP)/py/py.mk
LD_DIR=boards
CMSIS_DIR=$(TOP)/lib/stm32lib/CMSIS/STM32$(MCU_SERIES_UPPER)xx/Include
MCU_SERIES_UPPER = $(shell echo $(MCU_SERIES) | tr '[:lower:]' '[:upper:]')
HAL_DIR=lib/stm32lib/STM32$(MCU_SERIES_UPPER)xx_HAL_Driver
USBDEV_DIR=usbdev
#USBHOST_DIR=usbhost
FATFS_DIR=lib/oofatfs
DFU=$(TOP)/tools/dfu.py
# may need to prefix dfu-util with sudo
USE_PYDFU ?= 1
PYDFU ?= $(TOP)/tools/pydfu.py
DFU_UTIL ?= dfu-util
DEVICE=0483:df11
STFLASH ?= st-flash
OPENOCD ?= openocd
OPENOCD_CONFIG ?= boards/openocd_stm32f4.cfg
STARTUP_FILE ?= boards/startup_stm32$(MCU_SERIES).o
CROSS_COMPILE = arm-none-eabi-
INC += -I.
INC += -I$(TOP)
INC += -I$(BUILD)
INC += -I$(TOP)/lib/cmsis/inc
INC += -I$(CMSIS_DIR)/
INC += -I$(TOP)/$(HAL_DIR)/Inc
INC += -I$(USBDEV_DIR)/core/inc -I$(USBDEV_DIR)/class/inc
#INC += -I$(USBHOST_DIR)
# Basic Cortex-M flags
CFLAGS_CORTEX_M = -mthumb
# Select hardware floating-point support
ifeq ($(CMSIS_MCU),$(filter $(CMSIS_MCU),STM32F767xx STM32F769xx STM32H743xx))
CFLAGS_CORTEX_M += -mfpu=fpv5-d16 -mfloat-abi=hard
else
ifeq ($(MCU_SERIES),f0)
CFLAGS_CORTEX_M += -msoft-float
else
CFLAGS_CORTEX_M += -mfpu=fpv4-sp-d16 -mfloat-abi=hard
endif
endif
# Options for particular MCU series
CFLAGS_MCU_f0 = $(CFLAGS_CORTEX_M) -mtune=cortex-m0 -mcpu=cortex-m0
CFLAGS_MCU_f4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4
CFLAGS_MCU_f7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7
CFLAGS_MCU_l4 = $(CFLAGS_CORTEX_M) -mtune=cortex-m4 -mcpu=cortex-m4
CFLAGS_MCU_h7 = $(CFLAGS_CORTEX_M) -mtune=cortex-m7 -mcpu=cortex-m7
CFLAGS = $(INC) -Wall -Wpointer-arith -Werror -std=gnu99 -nostdlib $(CFLAGS_MOD) $(CFLAGS_EXTRA)
CFLAGS += -D$(CMSIS_MCU)
CFLAGS += $(CFLAGS_MCU_$(MCU_SERIES))
CFLAGS += $(COPT)
CFLAGS += -I$(BOARD_DIR)
CFLAGS += -DSTM32_HAL_H='<stm32$(MCU_SERIES)xx_hal.h>'
CFLAGS += -DMICROPY_HW_VTOR=$(TEXT0_ADDR)
ifeq ($(MICROPY_FLOAT_IMPL),double)
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_DOUBLE
else
CFLAGS += -DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT
CFLAGS += -fsingle-precision-constant -Wdouble-promotion
endif
LDFLAGS = -nostdlib -L $(LD_DIR) $(addprefix -T,$(LD_FILES)) -Map=$(@:.elf=.map) --cref
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
# Remove uncalled code from the final image.
CFLAGS += -fdata-sections -ffunction-sections
LDFLAGS += --gc-sections
# Debugging/Optimization
ifeq ($(DEBUG), 1)
CFLAGS += -g -DPENDSV_DEBUG
COPT = -O0
else
COPT += -Os -DNDEBUG
endif
SRC_LIB = $(addprefix lib/,\
libc/string0.c \
oofatfs/ff.c \
oofatfs/option/unicode.c \
mp-readline/readline.c \
netutils/netutils.c \
timeutils/timeutils.c \
utils/pyexec.c \
utils/interrupt_char.c \
utils/sys_stdio_mphal.c \
)
ifeq ($(MICROPY_FLOAT_IMPL),double)
SRC_LIBM = $(addprefix lib/libm_dbl/,\
__cos.c \
__expo2.c \
__fpclassify.c \
__rem_pio2.c \
__rem_pio2_large.c \
__signbit.c \
__sin.c \
__tan.c \
acos.c \
acosh.c \
asin.c \
asinh.c \
atan.c \
atan2.c \
atanh.c \
ceil.c \
cos.c \
cosh.c \
erf.c \
exp.c \
expm1.c \
floor.c \
fmod.c \
frexp.c \
ldexp.c \
lgamma.c \
log.c \
log10.c \
log1p.c \
modf.c \
nearbyint.c \
pow.c \
rint.c \
scalbn.c \
sin.c \
sinh.c \
sqrt.c \
tan.c \
tanh.c \
tgamma.c \
trunc.c \
)
else
SRC_LIBM = $(addprefix lib/libm/,\
math.c \
acoshf.c \
asinfacosf.c \
asinhf.c \
atan2f.c \
atanf.c \
atanhf.c \
ef_rem_pio2.c \
erf_lgamma.c \
fmodf.c \
kf_cos.c \
kf_rem_pio2.c \
kf_sin.c \
kf_tan.c \
log1pf.c \
nearbyintf.c \
sf_cos.c \
sf_erf.c \
sf_frexp.c \
sf_ldexp.c \
sf_modf.c \
sf_sin.c \
sf_tan.c \
wf_lgamma.c \
wf_tgamma.c \
)
ifeq ($(MCU_SERIES),f0)
SRC_LIBM += lib/libm/ef_sqrt.c
else
SRC_LIBM += lib/libm/thumb_vfp_sqrtf.c
endif
endif
EXTMOD_SRC_C = $(addprefix extmod/,\
modlwip.c \
modonewire.c \
)
DRIVERS_SRC_C = $(addprefix drivers/,\
bus/softspi.c \
bus/softqspi.c \
memory/spiflash.c \
dht/dht.c \
)
SRC_C = \
main.c \
stm32_it.c \
usbd_conf.c \
usbd_desc.c \
usbd_cdc_interface.c \
usbd_hid_interface.c \
usbd_msc_storage.c \
mphalport.c \
mpthreadport.c \
irq.c \
pendsv.c \
systick.c \
pybthread.c \
timer.c \
led.c \
pin.c \
pin_defs_stm32.c \
pin_named_pins.c \
bufhelper.c \
dma.c \
i2c.c \
pyb_i2c.c \
spi.c \
pyb_spi.c \
qspi.c \
uart.c \
can.c \
usb.c \
wdt.c \
gccollect.c \
help.c \
machine_i2c.c \
machine_spi.c \
modmachine.c \
modpyb.c \
modstm.c \
moduos.c \
modutime.c \
modusocket.c \
modnetwork.c \
extint.c \
usrsw.c \
rng.c \
rtc.c \
flash.c \
flashbdev.c \
spibdev.c \
storage.c \
sdcard.c \
sdram.c \
fatfs_port.c \
lcd.c \
accel.c \
servo.c \
dac.c \
adc.c \
$(wildcard $(BOARD_DIR)/*.c)
ifeq ($(MCU_SERIES),f0)
SRC_O = \
$(STARTUP_FILE) \
system_stm32f0.o \
resethandler_m0.o \
gchelper_m0.o
else
SRC_O = \
$(STARTUP_FILE) \
system_stm32.o \
resethandler.o \
gchelper.o
endif
SRC_HAL = $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
hal.c \
hal_adc.c \
hal_adc_ex.c \
hal_cortex.c \
hal_dac.c \
hal_dac_ex.c \
hal_dma.c \
hal_flash.c \
hal_flash_ex.c \
hal_gpio.c \
hal_i2c.c \
hal_pcd.c \
hal_pcd_ex.c \
hal_pwr.c \
hal_pwr_ex.c \
hal_rcc.c \
hal_rcc_ex.c \
hal_rtc.c \
hal_rtc_ex.c \
hal_spi.c \
hal_tim.c \
hal_tim_ex.c \
hal_uart.c \
)
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f4 f7 h7 l4))
$(BUILD)/$(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_ll_usb.o: CFLAGS += -Wno-attributes
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
hal_sd.c \
ll_sdmmc.c \
ll_fmc.c \
ll_usb.c \
)
endif
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES),f4 f7 h7))
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_,\
hal_sdram.c \
)
endif
ifeq ($(CMSIS_MCU),$(filter $(CMSIS_MCU),STM32H743xx))
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_, hal_fdcan.c)
else
SRC_HAL += $(addprefix $(HAL_DIR)/Src/stm32$(MCU_SERIES)xx_, hal_can.c)
endif
SRC_USBDEV = $(addprefix $(USBDEV_DIR)/,\
core/src/usbd_core.c \
core/src/usbd_ctlreq.c \
core/src/usbd_ioreq.c \
class/src/usbd_cdc_msc_hid.c \
class/src/usbd_msc_bot.c \
class/src/usbd_msc_scsi.c \
class/src/usbd_msc_data.c \
)
ifneq ($(MICROPY_PY_WIZNET5K),0)
WIZNET5K_DIR=drivers/wiznet5k
INC += -I$(TOP)/$(WIZNET5K_DIR)
CFLAGS_MOD += -DMICROPY_PY_WIZNET5K=$(MICROPY_PY_WIZNET5K) -D_WIZCHIP_=$(MICROPY_PY_WIZNET5K)
SRC_MOD += network_wiznet5k.c modnwwiznet5k.c
SRC_MOD += $(addprefix $(WIZNET5K_DIR)/,\
ethernet/w$(MICROPY_PY_WIZNET5K)/w$(MICROPY_PY_WIZNET5K).c \
ethernet/wizchip_conf.c \
ethernet/socket.c \
internet/dns/dns.c \
)
endif
# for CC3000 module
ifeq ($(MICROPY_PY_CC3K),1)
CC3000_DIR=drivers/cc3000
INC += -I$(TOP)/$(CC3000_DIR)/inc
CFLAGS_MOD += -DMICROPY_PY_CC3K=1
SRC_MOD += modnwcc3k.c
SRC_MOD += $(addprefix $(CC3000_DIR)/src/,\
cc3000_common.c \
evnt_handler.c \
hci.c \
netapp.c \
nvmem.c \
security.c \
socket.c \
wlan.c \
ccspi.c \
inet_ntop.c \
inet_pton.c \
patch.c \
patch_prog.c \
)
endif
LWIP_DIR = lib/lwip/src
INC += -I$(TOP)/$(LWIP_DIR)/include -Ilwip_inc
$(BUILD)/$(LWIP_DIR)/core/ipv4/dhcp.o: CFLAGS += -Wno-address
SRC_MOD += $(addprefix $(LWIP_DIR)/,\
core/def.c \
core/dns.c \
core/inet_chksum.c \
core/init.c \
core/ip.c \
core/mem.c \
core/memp.c \
core/netif.c \
core/pbuf.c \
core/raw.c \
core/stats.c \
core/sys.c \
core/tcp.c \
core/tcp_in.c \
core/tcp_out.c \
core/timeouts.c \
core/udp.c \
core/ipv4/autoip.c \
core/ipv4/dhcp.c \
core/ipv4/etharp.c \
core/ipv4/icmp.c \
core/ipv4/igmp.c \
core/ipv4/ip4_addr.c \
core/ipv4/ip4.c \
core/ipv4/ip4_frag.c \
core/ipv6/dhcp6.c \
core/ipv6/ethip6.c \
core/ipv6/icmp6.c \
core/ipv6/inet6.c \
core/ipv6/ip6_addr.c \
core/ipv6/ip6.c \
core/ipv6/ip6_frag.c \
core/ipv6/mld6.c \
core/ipv6/nd6.c \
netif/ethernet.c \
)
OBJ =
OBJ += $(PY_O)
OBJ += $(addprefix $(BUILD)/, $(SRC_LIB:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(EXTMOD_SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(DRIVERS_SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_O))
OBJ += $(addprefix $(BUILD)/, $(SRC_HAL:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_USBDEV:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
OBJ += $(BUILD)/pins_$(BOARD).o
# This file contains performance critical functions so turn up the optimisation
# level. It doesn't add much to the code size and improves performance a bit.
# Don't use -O3 with this file because gcc tries to optimise memset in terms of itself.
$(BUILD)/lib/libc/string0.o: COPT += -O2
# We put several files into the first 16K section with the ISRs.
# If we compile these using -O0 then it won't fit. So if you really want these
# to be compiled with -O0, then edit boards/common.ld (in the .isr_vector section)
# and comment out the following lines.
$(BUILD)/$(FATFS_DIR)/ff.o: COPT += -Os
$(filter $(PY_BUILD)/../extmod/vfs_fat_%.o, $(PY_O)): COPT += -Os
$(PY_BUILD)/formatfloat.o: COPT += -Os
$(PY_BUILD)/parsenum.o: COPT += -Os
$(PY_BUILD)/mpprint.o: COPT += -Os
all: $(TOP)/lib/stm32lib/README.md $(BUILD)/firmware.dfu $(BUILD)/firmware.hex
# For convenience, automatically fetch required submodules if they don't exist
$(TOP)/lib/stm32lib/README.md:
$(ECHO) "stm32lib submodule not found, fetching it now..."
(cd $(TOP) && git submodule update --init lib/stm32lib)
ifneq ($(FROZEN_DIR),)
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
endif
ifneq ($(FROZEN_MPY_DIR),)
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
# then invoke make with FROZEN_MPY_DIR=frozen (be sure to build from scratch).
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
endif
.PHONY: deploy
deploy: $(BUILD)/firmware.dfu
$(ECHO) "Writing $< to the board"
ifeq ($(USE_PYDFU),1)
$(Q)$(PYTHON) $(PYDFU) -u $<
else
$(Q)$(DFU_UTIL) -a 0 -d $(DEVICE) -D $<
endif
# A board should specify TEXT0_ADDR if to use a different location than the
# default for the firmware memory location. A board can also optionally define
# TEXT1_ADDR to split the firmware into two sections; see below for details.
TEXT0_ADDR ?= 0x08000000
ifeq ($(TEXT1_ADDR),)
# No TEXT1_ADDR given so put all firmware at TEXT0_ADDR location
deploy-stlink: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware.bin to the board via ST-LINK"
$(Q)$(STFLASH) write $(BUILD)/firmware.bin $(TEXT0_ADDR)
deploy-openocd: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware.bin to the board via ST-LINK using OpenOCD"
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware.bin $(TEXT0_ADDR)"
$(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -j .isr_vector -j .text -j .data $^ $(BUILD)/firmware.bin
$(Q)$(PYTHON) $(DFU) -b $(TEXT0_ADDR):$(BUILD)/firmware.bin $@
else
# TEXT0_ADDR and TEXT1_ADDR are specified so split firmware between these locations
deploy-stlink: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware0.bin to the board via ST-LINK"
$(Q)$(STFLASH) write $(BUILD)/firmware0.bin $(TEXT0_ADDR)
$(ECHO) "Writing $(BUILD)/firmware1.bin to the board via ST-LINK"
$(Q)$(STFLASH) --reset write $(BUILD)/firmware1.bin $(TEXT1_ADDR)
deploy-openocd: $(BUILD)/firmware.dfu
$(ECHO) "Writing $(BUILD)/firmware{0,1}.bin to the board via ST-LINK using OpenOCD"
$(Q)$(OPENOCD) -f $(OPENOCD_CONFIG) -c "stm_flash $(BUILD)/firmware0.bin $(TEXT0_ADDR) $(BUILD)/firmware1.bin $(TEXT1_ADDR)"
$(BUILD)/firmware.dfu: $(BUILD)/firmware.elf
$(ECHO) "GEN $@"
$(Q)$(OBJCOPY) -O binary -j .isr_vector $^ $(BUILD)/firmware0.bin
$(Q)$(OBJCOPY) -O binary -j .text -j .data $^ $(BUILD)/firmware1.bin
$(Q)$(PYTHON) $(DFU) -b $(TEXT0_ADDR):$(BUILD)/firmware0.bin -b $(TEXT1_ADDR):$(BUILD)/firmware1.bin $@
endif
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(ECHO) "GEN $@"
$(Q)$(OBJCOPY) -O ihex $< $@
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "LINK $@"
$(Q)$(LD) $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
PLLVALUES = boards/pllvalues.py
MAKE_PINS = boards/make-pins.py
BOARD_PINS = $(BOARD_DIR)/pins.csv
PREFIX_FILE = boards/stm32f4xx_prefix.c
GEN_PINS_SRC = $(BUILD)/pins_$(BOARD).c
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
GEN_PINS_AF_DEFS = $(HEADER_BUILD)/pins_af_defs.h
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
INSERT_USB_IDS = $(TOP)/tools/insert-usb-ids.py
FILE2H = $(TOP)/tools/file2h.py
USB_IDS_FILE = usb.h
CDCINF_TEMPLATE = pybcdc.inf_template
GEN_CDCINF_FILE = $(HEADER_BUILD)/pybcdc.inf
GEN_CDCINF_HEADER = $(HEADER_BUILD)/pybcdc_inf.h
# List of sources for qstr extraction
SRC_QSTR += $(SRC_C) $(SRC_MOD) $(SRC_LIB) $(EXTMOD_SRC_C)
# Append any auto-generated sources that are needed by sources listed in
# SRC_QSTR
SRC_QSTR_AUTO_DEPS += $(GEN_CDCINF_HEADER)
# Making OBJ use an order-only depenedency on the generated pins.h file
# has the side effect of making the pins.h file before we actually compile
# any of the objects. The normal dependency generation will deal with the
# case when pins.h is modified. But when it doesn't exist, we don't know
# which source files might need it.
$(OBJ): | $(GEN_PINS_HDR)
# With conditional pins, we may need to regenerate qstrdefs.h when config
# options change.
$(HEADER_BUILD)/qstrdefs.generated.h: $(BOARD_DIR)/mpconfigboard.h
# main.c can't be even preprocessed without $(GEN_CDCINF_HEADER)
main.c: $(GEN_CDCINF_HEADER)
# Use a pattern rule here so that make will only call make-pins.py once to make
# both pins_$(BOARD).c and pins.h
$(BUILD)/%_$(BOARD).c $(HEADER_BUILD)/%.h $(HEADER_BUILD)/%_af_const.h $(HEADER_BUILD)/%_af_defs.h $(BUILD)/%_qstr.h: $(BOARD_DIR)/%.csv $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
$(ECHO) "GEN $@"
$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE) --prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) --qstr $(GEN_PINS_QSTR) --af-const $(GEN_PINS_AF_CONST) --af-defs $(GEN_PINS_AF_DEFS) --af-py $(GEN_PINS_AF_PY) > $(GEN_PINS_SRC)
$(BUILD)/pins_$(BOARD).o: $(BUILD)/pins_$(BOARD).c
$(call compile_c)
GEN_PLLFREQTABLE_HDR = $(HEADER_BUILD)/pllfreqtable.h
GEN_STMCONST_HDR = $(HEADER_BUILD)/modstm_const.h
GEN_STMCONST_QSTR = $(BUILD)/modstm_qstr.h
GEN_STMCONST_MPZ = $(HEADER_BUILD)/modstm_mpz.h
CMSIS_MCU_LOWER = $(shell echo $(CMSIS_MCU) | tr '[:upper:]' '[:lower:]')
CMSIS_MCU_HDR = $(CMSIS_DIR)/$(CMSIS_MCU_LOWER).h
modmachine.c: $(GEN_PLLFREQTABLE_HDR)
$(GEN_PLLFREQTABLE_HDR): $(PLLVALUES) | $(HEADER_BUILD)
$(ECHO) "GEN $@"
$(Q)$(PYTHON) $(PLLVALUES) -c $(if $(filter $(MCU_SERIES),f7),--relax-pll48,) file:$(BOARD_DIR)/stm32$(MCU_SERIES)xx_hal_conf.h > $@
$(BUILD)/modstm.o: $(GEN_STMCONST_HDR)
# Use a pattern rule here so that make will only call make-stmconst.py once to
# make both modstm_const.h and modstm_qstr.h
$(HEADER_BUILD)/%_const.h $(BUILD)/%_qstr.h: $(CMSIS_MCU_HDR) make-stmconst.py | $(HEADER_BUILD)
$(ECHO) "GEN stmconst $@"
$(Q)$(PYTHON) make-stmconst.py --qstr $(GEN_STMCONST_QSTR) --mpz $(GEN_STMCONST_MPZ) $(CMSIS_MCU_HDR) > $(GEN_STMCONST_HDR)
$(GEN_CDCINF_HEADER): $(GEN_CDCINF_FILE) $(FILE2H) | $(HEADER_BUILD)
$(ECHO) "GEN $@"
$(Q)$(PYTHON) $(FILE2H) $< > $@
$(GEN_CDCINF_FILE): $(CDCINF_TEMPLATE) $(INSERT_USB_IDS) $(USB_IDS_FILE) | $(HEADER_BUILD)
$(ECHO) "GEN $@"
$(Q)$(PYTHON) $(INSERT_USB_IDS) $(USB_IDS_FILE) $< > $@
include $(TOP)/py/mkrules.mk