djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
94beeabd2e
circuitpython/ports/stm32/lcd.c
Jim Mussared 94beeabd2e py/obj: Convert make_new into a mp_obj_type_t slot. 
Instead of being an explicit field, it's now a slot like all the other
methods.

This is a marginal code size improvement because most types have a make_new
(100/138 on PYBV11), however it improves consistency in how types are
declared, removing the special case for make_new.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-19 19:06:15 +10:00

537 lines
19 KiB
C
Raw Blame History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013, 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include <string.h>
#include "py/mphal.h"
#include "py/runtime.h"
#if MICROPY_HW_HAS_LCD
#include "extmod/font_petme128_8x8.h"
#include "pin.h"
#include "bufhelper.h"
#include "spi.h"
#include "lcd.h"
/// \moduleref pyb
/// \class LCD - LCD control for the LCD touch-sensor pyskin
///
/// The LCD class is used to control the LCD on the LCD touch-sensor pyskin,
/// LCD32MKv1.0. The LCD is a 128x32 pixel monochrome screen, part NHD-C12832A1Z.
///
/// The pyskin must be connected in either the X or Y positions, and then
/// an LCD object is made using:
///
/// lcd = pyb.LCD('X') # if pyskin is in the X position
/// lcd = pyb.LCD('Y') # if pyskin is in the Y position
///
/// Then you can use:
///
/// lcd.light(True) # turn the backlight on
/// lcd.write('Hello world!\n') # print text to the screen
///
/// This driver implements a double buffer for setting/getting pixels.
/// For example, to make a bouncing dot, try:
///
/// x = y = 0
/// dx = dy = 1
/// while True:
/// # update the dot's position
/// x += dx
/// y += dy
///
/// # make the dot bounce of the edges of the screen
/// if x <= 0 or x >= 127: dx = -dx
/// if y <= 0 or y >= 31: dy = -dy
///
/// lcd.fill(0) # clear the buffer
/// lcd.pixel(x, y, 1) # draw the dot
/// lcd.show() # show the buffer
/// pyb.delay(50) # pause for 50ms
#define LCD_INSTR (0)
#define LCD_DATA (1)
#define LCD_CHAR_BUF_W (16)
#define LCD_CHAR_BUF_H (4)
#define LCD_PIX_BUF_W (128)
#define LCD_PIX_BUF_H (32)
#define LCD_PIX_BUF_BYTE_SIZE (LCD_PIX_BUF_W * LCD_PIX_BUF_H / 8)
typedef struct _pyb_lcd_obj_t {
mp_obj_base_t base;
// hardware control for the LCD
const spi_t *spi;
const pin_obj_t *pin_cs1;
const pin_obj_t *pin_rst;
const pin_obj_t *pin_a0;
const pin_obj_t *pin_bl;
// character buffer for stdout-like output
char char_buffer[LCD_CHAR_BUF_W * LCD_CHAR_BUF_H];
int line;
int column;
int next_line;
// double buffering for pixel buffer
byte pix_buf[LCD_PIX_BUF_BYTE_SIZE];
byte pix_buf2[LCD_PIX_BUF_BYTE_SIZE];
} pyb_lcd_obj_t;
STATIC void lcd_delay(void) {
__asm volatile ("nop\nnop");
}
STATIC void lcd_out(pyb_lcd_obj_t *lcd, int instr_data, uint8_t i) {
lcd_delay();
mp_hal_pin_low(lcd->pin_cs1); // CS=0; enable
if (instr_data == LCD_INSTR) {
mp_hal_pin_low(lcd->pin_a0); // A0=0; select instr reg
} else {
mp_hal_pin_high(lcd->pin_a0); // A0=1; select data reg
}
lcd_delay();
HAL_SPI_Transmit(lcd->spi->spi, &i, 1, 1000);
lcd_delay();
mp_hal_pin_high(lcd->pin_cs1); // CS=1; disable
}
// write a string to the LCD at the current cursor location
// output it straight away (doesn't use the pixel buffer)
STATIC void lcd_write_strn(pyb_lcd_obj_t *lcd, const char *str, unsigned int len) {
int redraw_min = lcd->line * LCD_CHAR_BUF_W + lcd->column;
int redraw_max = redraw_min;
for (; len > 0; len--, str++) {
// move to next line if needed
if (lcd->next_line) {
if (lcd->line + 1 < LCD_CHAR_BUF_H) {
lcd->line += 1;
} else {
lcd->line = LCD_CHAR_BUF_H - 1;
for (int i = 0; i < LCD_CHAR_BUF_W * (LCD_CHAR_BUF_H - 1); i++) {
lcd->char_buffer[i] = lcd->char_buffer[i + LCD_CHAR_BUF_W];
}
for (int i = 0; i < LCD_CHAR_BUF_W; i++) {
lcd->char_buffer[LCD_CHAR_BUF_W * (LCD_CHAR_BUF_H - 1) + i] = ' ';
}
redraw_min = 0;
redraw_max = LCD_CHAR_BUF_W * LCD_CHAR_BUF_H;
}
lcd->next_line = 0;
lcd->column = 0;
}
if (*str == '\n') {
lcd->next_line = 1;
} else if (*str == '\r') {
lcd->column = 0;
} else if (*str == '\b') {
if (lcd->column > 0) {
lcd->column--;
redraw_min = 0; // could optimise this to not redraw everything
}
} else if (lcd->column >= LCD_CHAR_BUF_W) {
lcd->next_line = 1;
str -= 1;
len += 1;
} else {
lcd->char_buffer[lcd->line * LCD_CHAR_BUF_W + lcd->column] = *str;
lcd->column += 1;
int max = lcd->line * LCD_CHAR_BUF_W + lcd->column;
if (max > redraw_max) {
redraw_max = max;
}
}
}
// we must draw upside down, because the LCD is upside down
for (int i = redraw_min; i < redraw_max; i++) {
uint page = i / LCD_CHAR_BUF_W;
uint offset = 8 * (LCD_CHAR_BUF_W - 1 - (i - (page * LCD_CHAR_BUF_W)));
lcd_out(lcd, LCD_INSTR, 0xb0 | page); // page address set
lcd_out(lcd, LCD_INSTR, 0x10 | ((offset >> 4) & 0x0f)); // column address set upper
lcd_out(lcd, LCD_INSTR, 0x00 | (offset & 0x0f)); // column address set lower
int chr = lcd->char_buffer[i];
if (chr < 32 || chr > 126) {
chr = 127;
}
const uint8_t *chr_data = &font_petme128_8x8[(chr - 32) * 8];
for (int j = 7; j >= 0; j--) {
lcd_out(lcd, LCD_DATA, chr_data[j]);
}
}
}
/// \classmethod \constructor(skin_position)
///
/// Construct an LCD object in the given skin position. `skin_position` can be 'X' or 'Y', and
/// should match the position where the LCD pyskin is plugged in.
STATIC mp_obj_t pyb_lcd_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) {
// check arguments
mp_arg_check_num(n_args, n_kw, 1, 1, false);
// get LCD position
const char *lcd_id = mp_obj_str_get_str(args[0]);
// create lcd object
pyb_lcd_obj_t *lcd = mp_obj_malloc(pyb_lcd_obj_t, &pyb_lcd_type);
// configure pins
// TODO accept an SPI object and pin objects for full customisation
if ((lcd_id[0] | 0x20) == 'x' && lcd_id[1] == '\0') {
lcd->spi = &spi_obj[0];
lcd->pin_cs1 = pyb_pin_X3;
lcd->pin_rst = pyb_pin_X4;
lcd->pin_a0 = pyb_pin_X5;
lcd->pin_bl = pyb_pin_X12;
} else if ((lcd_id[0] | 0x20) == 'y' && lcd_id[1] == '\0') {
lcd->spi = &spi_obj[1];
lcd->pin_cs1 = pyb_pin_Y3;
lcd->pin_rst = pyb_pin_Y4;
lcd->pin_a0 = pyb_pin_Y5;
lcd->pin_bl = pyb_pin_Y12;
} else {
mp_raise_msg_varg(&mp_type_ValueError, MP_ERROR_TEXT("LCD(%s) doesn't exist"), lcd_id);
}
// init the SPI bus
SPI_InitTypeDef *init = &lcd->spi->spi->Init;
init->Mode = SPI_MODE_MASTER;
// compute the baudrate prescaler from the desired baudrate
// select a prescaler that yields at most the desired baudrate
uint spi_clock;
if (lcd->spi->spi->Instance == SPI1) {
// SPI1 is on APB2
spi_clock = HAL_RCC_GetPCLK2Freq();
} else {
// SPI2 and SPI3 are on APB1
spi_clock = HAL_RCC_GetPCLK1Freq();
}
uint br_prescale = spi_clock / 16000000; // datasheet says LCD can run at 20MHz, but we go for 16MHz
if (br_prescale <= 2) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
} else if (br_prescale <= 4) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_4;
} else if (br_prescale <= 8) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
} else if (br_prescale <= 16) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
} else if (br_prescale <= 32) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32;
} else if (br_prescale <= 64) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
} else if (br_prescale <= 128) {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_128;
} else {
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
}
// data is sent bigendian, latches on rising clock
init->CLKPolarity = SPI_POLARITY_HIGH;
init->CLKPhase = SPI_PHASE_2EDGE;
init->Direction = SPI_DIRECTION_2LINES;
init->DataSize = SPI_DATASIZE_8BIT;
init->NSS = SPI_NSS_SOFT;
init->FirstBit = SPI_FIRSTBIT_MSB;
init->TIMode = SPI_TIMODE_DISABLED;
init->CRCCalculation = SPI_CRCCALCULATION_DISABLED;
init->CRCPolynomial = 0;
// init the SPI bus
spi_init(lcd->spi, false);
// set the pins to default values
mp_hal_pin_high(lcd->pin_cs1);
mp_hal_pin_high(lcd->pin_rst);
mp_hal_pin_high(lcd->pin_a0);
mp_hal_pin_low(lcd->pin_bl);
// init the pins to be push/pull outputs
mp_hal_pin_output(lcd->pin_cs1);
mp_hal_pin_output(lcd->pin_rst);
mp_hal_pin_output(lcd->pin_a0);
mp_hal_pin_output(lcd->pin_bl);
// init the LCD
mp_hal_delay_ms(1); // wait a bit
mp_hal_pin_low(lcd->pin_rst); // RST=0; reset
mp_hal_delay_ms(1); // wait for reset; 2us min
mp_hal_pin_high(lcd->pin_rst); // RST=1; enable
mp_hal_delay_ms(1); // wait for reset; 2us min
lcd_out(lcd, LCD_INSTR, 0xa0); // ADC select, normal
lcd_out(lcd, LCD_INSTR, 0xc0); // common output mode select, normal (this flips the display)
lcd_out(lcd, LCD_INSTR, 0xa2); // LCD bias set, 1/9 bias
lcd_out(lcd, LCD_INSTR, 0x2f); // power control set, 0b111=(booster on, vreg on, vfollow on)
lcd_out(lcd, LCD_INSTR, 0x21); // v0 voltage regulator internal resistor ratio set, 0b001=small
lcd_out(lcd, LCD_INSTR, 0x81); // electronic volume mode set
lcd_out(lcd, LCD_INSTR, 0x28); // electronic volume register set
lcd_out(lcd, LCD_INSTR, 0x40); // display start line set, 0
lcd_out(lcd, LCD_INSTR, 0xaf); // LCD display, on
// clear LCD RAM
for (int page = 0; page < 4; page++) {
lcd_out(lcd, LCD_INSTR, 0xb0 | page); // page address set
lcd_out(lcd, LCD_INSTR, 0x10); // column address set upper
lcd_out(lcd, LCD_INSTR, 0x00); // column address set lower
for (int i = 0; i < 128; i++) {
lcd_out(lcd, LCD_DATA, 0x00);
}
}
// clear local char buffer
memset(lcd->char_buffer, ' ', LCD_CHAR_BUF_H * LCD_CHAR_BUF_W);
lcd->line = 0;
lcd->column = 0;
lcd->next_line = 0;
// clear local pixel buffer
memset(lcd->pix_buf, 0, LCD_PIX_BUF_BYTE_SIZE);
memset(lcd->pix_buf2, 0, LCD_PIX_BUF_BYTE_SIZE);
return MP_OBJ_FROM_PTR(lcd);
}
/// \method command(instr_data, buf)
///
/// Send an arbitrary command to the LCD. Pass 0 for `instr_data` to send an
/// instruction, otherwise pass 1 to send data. `buf` is a buffer with the
/// instructions/data to send.
STATIC mp_obj_t pyb_lcd_command(mp_obj_t self_in, mp_obj_t instr_data_in, mp_obj_t val) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
// get whether instr or data
int instr_data = mp_obj_get_int(instr_data_in);
// get the buffer to send from
mp_buffer_info_t bufinfo;
uint8_t data[1];
pyb_buf_get_for_send(val, &bufinfo, data);
// send the data
for (uint i = 0; i < bufinfo.len; i++) {
lcd_out(self, instr_data, ((byte *)bufinfo.buf)[i]);
}
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_3(pyb_lcd_command_obj, pyb_lcd_command);
/// \method contrast(value)
///
/// Set the contrast of the LCD. Valid values are between 0 and 47.
STATIC mp_obj_t pyb_lcd_contrast(mp_obj_t self_in, mp_obj_t contrast_in) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
int contrast = mp_obj_get_int(contrast_in);
if (contrast < 0) {
contrast = 0;
} else if (contrast > 0x2f) {
contrast = 0x2f;
}
lcd_out(self, LCD_INSTR, 0x81); // electronic volume mode set
lcd_out(self, LCD_INSTR, contrast); // electronic volume register set
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_lcd_contrast_obj, pyb_lcd_contrast);
/// \method light(value)
///
/// Turn the backlight on/off. True or 1 turns it on, False or 0 turns it off.
STATIC mp_obj_t pyb_lcd_light(mp_obj_t self_in, mp_obj_t value) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
if (mp_obj_is_true(value)) {
mp_hal_pin_high(self->pin_bl); // set pin high to turn backlight on
} else {
mp_hal_pin_low(self->pin_bl); // set pin low to turn backlight off
}
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_lcd_light_obj, pyb_lcd_light);
/// \method write(str)
///
/// Write the string `str` to the screen. It will appear immediately.
STATIC mp_obj_t pyb_lcd_write(mp_obj_t self_in, mp_obj_t str) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
size_t len;
const char *data = mp_obj_str_get_data(str, &len);
lcd_write_strn(self, data, len);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_lcd_write_obj, pyb_lcd_write);
/// \method fill(colour)
///
/// Fill the screen with the given colour (0 or 1 for white or black).
///
/// This method writes to the hidden buffer. Use `show()` to show the buffer.
STATIC mp_obj_t pyb_lcd_fill(mp_obj_t self_in, mp_obj_t col_in) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
int col = mp_obj_get_int(col_in);
if (col) {
col = 0xff;
}
memset(self->pix_buf, col, LCD_PIX_BUF_BYTE_SIZE);
memset(self->pix_buf2, col, LCD_PIX_BUF_BYTE_SIZE);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_2(pyb_lcd_fill_obj, pyb_lcd_fill);
/// \method get(x, y)
///
/// Get the pixel at the position `(x, y)`. Returns 0 or 1.
///
/// This method reads from the visible buffer.
STATIC mp_obj_t pyb_lcd_get(mp_obj_t self_in, mp_obj_t x_in, mp_obj_t y_in) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
int x = mp_obj_get_int(x_in);
int y = mp_obj_get_int(y_in);
if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
uint byte_pos = x + 128 * ((uint)y >> 3);
if (self->pix_buf[byte_pos] & (1 << (y & 7))) {
return mp_obj_new_int(1);
}
}
return mp_obj_new_int(0);
}
STATIC MP_DEFINE_CONST_FUN_OBJ_3(pyb_lcd_get_obj, pyb_lcd_get);
/// \method pixel(x, y, colour)
///
/// Set the pixel at `(x, y)` to the given colour (0 or 1).
///
/// This method writes to the hidden buffer. Use `show()` to show the buffer.
STATIC mp_obj_t pyb_lcd_pixel(size_t n_args, const mp_obj_t *args) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(args[0]);
int x = mp_obj_get_int(args[1]);
int y = mp_obj_get_int(args[2]);
if (0 <= x && x <= 127 && 0 <= y && y <= 31) {
uint byte_pos = x + 128 * ((uint)y >> 3);
if (mp_obj_get_int(args[3]) == 0) {
self->pix_buf2[byte_pos] &= ~(1 << (y & 7));
} else {
self->pix_buf2[byte_pos] |= 1 << (y & 7);
}
}
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pyb_lcd_pixel_obj, 4, 4, pyb_lcd_pixel);
/// \method text(str, x, y, colour)
///
/// Draw the given text to the position `(x, y)` using the given colour (0 or 1).
///
/// This method writes to the hidden buffer. Use `show()` to show the buffer.
STATIC mp_obj_t pyb_lcd_text(size_t n_args, const mp_obj_t *args) {
// extract arguments
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(args[0]);
size_t len;
const char *data = mp_obj_str_get_data(args[1], &len);
int x0 = mp_obj_get_int(args[2]);
int y0 = mp_obj_get_int(args[3]);
int col = mp_obj_get_int(args[4]);
// loop over chars
for (const char *top = data + len; data < top; data++) {
// get char and make sure its in range of font
uint chr = *(byte *)data;
if (chr < 32 || chr > 127) {
chr = 127;
}
// get char data
const uint8_t *chr_data = &font_petme128_8x8[(chr - 32) * 8];
// loop over char data
for (uint j = 0; j < 8; j++, x0++) {
if (0 <= x0 && x0 < LCD_PIX_BUF_W) { // clip x
uint vline_data = chr_data[j]; // each byte of char data is a vertical column of 8 pixels, LSB at top
for (int y = y0; vline_data; vline_data >>= 1, y++) { // scan over vertical column
if (vline_data & 1) { // only draw if pixel set
if (0 <= y && y < LCD_PIX_BUF_H) { // clip y
uint byte_pos = x0 + LCD_PIX_BUF_W * ((uint)y >> 3);
if (col == 0) {
// clear pixel
self->pix_buf2[byte_pos] &= ~(1 << (y & 7));
} else {
// set pixel
self->pix_buf2[byte_pos] |= 1 << (y & 7);
}
}
}
}
}
}
}
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pyb_lcd_text_obj, 5, 5, pyb_lcd_text);
/// \method show()
///
/// Show the hidden buffer on the screen.
STATIC mp_obj_t pyb_lcd_show(mp_obj_t self_in) {
pyb_lcd_obj_t *self = MP_OBJ_TO_PTR(self_in);
memcpy(self->pix_buf, self->pix_buf2, LCD_PIX_BUF_BYTE_SIZE);
for (uint page = 0; page < 4; page++) {
lcd_out(self, LCD_INSTR, 0xb0 | page); // page address set
lcd_out(self, LCD_INSTR, 0x10); // column address set upper; 0
lcd_out(self, LCD_INSTR, 0x00); // column address set lower; 0
for (uint i = 0; i < 128; i++) {
lcd_out(self, LCD_DATA, self->pix_buf[128 * page + 127 - i]);
}
}
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(pyb_lcd_show_obj, pyb_lcd_show);
STATIC const mp_rom_map_elem_t pyb_lcd_locals_dict_table[] = {
// instance methods
{ MP_ROM_QSTR(MP_QSTR_command), MP_ROM_PTR(&pyb_lcd_command_obj) },
{ MP_ROM_QSTR(MP_QSTR_contrast), MP_ROM_PTR(&pyb_lcd_contrast_obj) },
{ MP_ROM_QSTR(MP_QSTR_light), MP_ROM_PTR(&pyb_lcd_light_obj) },
{ MP_ROM_QSTR(MP_QSTR_write), MP_ROM_PTR(&pyb_lcd_write_obj) },
{ MP_ROM_QSTR(MP_QSTR_fill), MP_ROM_PTR(&pyb_lcd_fill_obj) },
{ MP_ROM_QSTR(MP_QSTR_get), MP_ROM_PTR(&pyb_lcd_get_obj) },
{ MP_ROM_QSTR(MP_QSTR_pixel), MP_ROM_PTR(&pyb_lcd_pixel_obj) },
{ MP_ROM_QSTR(MP_QSTR_text), MP_ROM_PTR(&pyb_lcd_text_obj) },
{ MP_ROM_QSTR(MP_QSTR_show), MP_ROM_PTR(&pyb_lcd_show_obj) },
};
STATIC MP_DEFINE_CONST_DICT(pyb_lcd_locals_dict, pyb_lcd_locals_dict_table);
MP_DEFINE_CONST_OBJ_TYPE(
pyb_lcd_type,
MP_QSTR_LCD,
MP_TYPE_FLAG_NONE,
make_new, pyb_lcd_make_new,
locals_dict, &pyb_lcd_locals_dict
);
#endif // MICROPY_HW_HAS_LCD
Reference in New Issue View Git Blame Copy Permalink