circuitpython/shared-bindings/busio/UART.c

/*
 * This file is part of the Micro Python project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2016 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <stdint.h>

#include "shared-bindings/busio/UART.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-bindings/util.h"

#include "lib/utils/context_manager_helpers.h"
#include "lib/utils/interrupt_char.h"

#include "py/ioctl.h"
#include "py/objproperty.h"
#include "py/runtime.h"
#include "py/stream.h"
#include "supervisor/shared/translate.h"

//|class UART:
//|""".. currentmodule:: busio
//|
//|:class:`UART` -- a bidirectional serial protocol
//|================================================="""
//|def __init__(self, tx: microcontroller.Pin, rx: microcontroller.Pin, *, baudrate: int = 9600, bits: int = 8, parity: Parity = None, stop: int = 1, timeout: float = 1, receiver_buffer_size: int = 64):
//|"""A common bidirectional serial protocol that uses an an agreed upon speed
//|rather than a shared clock line.
//|
//|:param ~microcontroller.Pin tx: the pin to transmit with, or ``None`` if this ``UART`` is receive-only.
//|:param ~microcontroller.Pin rx: the pin to receive on, or ``None`` if this ``UART`` is transmit-only.
//|:param ~microcontroller.Pin rts: the pin for rts, or ``None`` if rts not in use.
//|:param ~microcontroller.Pin cts: the pin for cts, or ``None`` if cts not in use.
//|:param ~microcontroller.Pin rs485_dir: the pin for rs485 direction setting, or ``None`` if rs485 not in use.
//|:param bool rs485_invert: set to invert the sense of the rs485_dir pin.
//|:param int baudrate: the transmit and receive speed.
//|:param int bits:  the number of bits per byte, 7, 8 or 9.
//|:param Parity parity:  the parity used for error checking.
//|:param int stop:  the number of stop bits, 1 or 2.
//|:param float timeout:  the timeout in seconds to wait for the first character and between subsequent characters when reading. Raises ``ValueError`` if timeout >100 seconds.
//|:param int receiver_buffer_size: the character length of the read buffer (0 to disable). (When a character is 9 bits the buffer will be 2 * receiver_buffer_size bytes.)
//|
//|*New in CircuitPython 4.0:* ``timeout`` has incompatibly changed units from milliseconds to seconds.
//|The new upper limit on ``timeout`` is meant to catch mistaken use of milliseconds."""
//|...
typedef struct {
    mp_obj_base_t base;
} busio_uart_parity_obj_t;
extern const busio_uart_parity_obj_t busio_uart_parity_even_obj;
extern const busio_uart_parity_obj_t busio_uart_parity_odd_obj;

STATIC void validate_timeout(mp_float_t timeout) {
    if (timeout < (mp_float_t) 0.0f ||  timeout > (mp_float_t) 100.0f) {
        mp_raise_ValueError(translate("timeout must be 0.0-100.0 seconds"));
    }
}

STATIC mp_obj_t busio_uart_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
    // Always initially allocate the UART object within the long-lived heap.
    // This is needed to avoid crashes with certain UART implementations which
    // cannot accomodate being moved after creation. (See
    // https://github.com/adafruit/circuitpython/issues/1056)
    busio_uart_obj_t *self = m_new_ll_obj(busio_uart_obj_t);
    self->base.type = &busio_uart_type;
    enum { ARG_tx, ARG_rx, ARG_baudrate, ARG_bits, ARG_parity, ARG_stop, ARG_timeout, ARG_receiver_buffer_size,
           ARG_rts, ARG_cts, ARG_rs485_dir,ARG_rs485_invert};
    static const mp_arg_t allowed_args[] = {
        { MP_QSTR_tx, MP_ARG_REQUIRED | MP_ARG_OBJ },
        { MP_QSTR_rx, MP_ARG_REQUIRED | MP_ARG_OBJ },
        { MP_QSTR_baudrate, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 9600} },
        { MP_QSTR_bits, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 8} },
        { MP_QSTR_parity, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
        { MP_QSTR_stop, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 1} },
        { MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = MP_OBJ_NEW_SMALL_INT(1)} },
        { MP_QSTR_receiver_buffer_size, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 64} },
        { MP_QSTR_rts, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
        { MP_QSTR_cts, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none} },
        { MP_QSTR_rs485_dir, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_obj = mp_const_none } },
        { MP_QSTR_rs485_invert, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false } },
    };
    mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
    mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);

    const mcu_pin_obj_t* rx = validate_obj_is_free_pin_or_none(args[ARG_rx].u_obj);
    const mcu_pin_obj_t* tx = validate_obj_is_free_pin_or_none(args[ARG_tx].u_obj);

    if ( (tx == NULL) && (rx == NULL) ) {
        mp_raise_ValueError(translate("tx and rx cannot both be None"));
    }

    uint8_t bits = args[ARG_bits].u_int;
    if (bits < 7 || bits > 9) {
        mp_raise_ValueError(translate("bits must be 7, 8 or 9"));
    }

    uart_parity_t parity = PARITY_NONE;
    if (args[ARG_parity].u_obj == &busio_uart_parity_even_obj) {
        parity = PARITY_EVEN;
    } else if (args[ARG_parity].u_obj == &busio_uart_parity_odd_obj) {
        parity = PARITY_ODD;
    }

    uint8_t stop = args[ARG_stop].u_int;
    if (stop != 1 && stop != 2) {
        mp_raise_ValueError(translate("stop must be 1 or 2"));
    }

    mp_float_t timeout = mp_obj_get_float(args[ARG_timeout].u_obj);
    validate_timeout(timeout);

    const mcu_pin_obj_t* rts = validate_obj_is_free_pin_or_none(args[ARG_rts].u_obj);
    const mcu_pin_obj_t* cts = validate_obj_is_free_pin_or_none(args[ARG_cts].u_obj);
    const mcu_pin_obj_t* rs485_dir = validate_obj_is_free_pin_or_none(args[ARG_rs485_dir].u_obj);

    const bool rs485_invert = args[ARG_rs485_invert].u_bool;

    common_hal_busio_uart_construct(self, tx, rx, rts, cts, rs485_dir, rs485_invert,
                                    args[ARG_baudrate].u_int, bits, parity, stop, timeout,
                                    args[ARG_receiver_buffer_size].u_int);
    return (mp_obj_t)self;
}

//|def deinit(self, ) -> Any:
//|"""Deinitialises the UART and releases any hardware resources for reuse."""
//|...
STATIC mp_obj_t busio_uart_obj_deinit(mp_obj_t self_in) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    common_hal_busio_uart_deinit(self);
    return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_deinit_obj, busio_uart_obj_deinit);

STATIC void check_for_deinit(busio_uart_obj_t *self) {
    if (common_hal_busio_uart_deinited(self)) {
        raise_deinited_error();
    }
}

//|def __enter__(self, ) -> Any:
//|"""No-op used by Context Managers."""
//|...
//  Provided by context manager helper.

//|def __exit__(self, ) -> Any:
//|"""Automatically deinitializes the hardware when exiting a context. See
//|:ref:`lifetime-and-contextmanagers` for more info."""
//|...
STATIC mp_obj_t busio_uart_obj___exit__(size_t n_args, const mp_obj_t *args) {
    (void)n_args;
    common_hal_busio_uart_deinit(args[0]);
    return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(busio_uart___exit___obj, 4, 4, busio_uart_obj___exit__);

// These are standard stream methods. Code is in py/stream.c.
//
//|def read(self, nbytes: Any = None) -> Any:
//|"""Read characters.  If ``nbytes`` is specified then read at most that many
//|bytes. Otherwise, read everything that arrives until the connection
//|times out. Providing the number of bytes expected is highly recommended
//|because it will be faster.
//|
//|:return: Data read
//|:rtype: bytes or None"""
//|...

//|def readinto(self, buf: Any) -> Any:
//|""".. method:: readinto(buf)
//|
//|Read bytes into the ``buf``. Read at most ``len(buf)`` bytes.
//|
//|:return: number of bytes read and stored into ``buf``
//|:rtype: int or None (on a non-blocking error)
//|
//|*New in CircuitPython 4.0:* No length parameter is permitted."""
//|...

//|def readline(self, ) -> Any:
//|""".. method:: readline()
//|
//|Read a line, ending in a newline character.
//|
//|:return: the line read
//|:rtype: int or None"""
//|...

//|def write(self, buf: Any) -> Any:
//|""".. method:: write(buf)
//|
//|Write the buffer of bytes to the bus.
//|
//|*New in CircuitPython 4.0:* ``buf`` must be bytes, not a string.
//|
//|:return: the number of bytes written
//|:rtype: int or None"""
//|...

// These three methods are used by the shared stream methods.
STATIC mp_uint_t busio_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    byte *buf = buf_in;

    // make sure we want at least 1 char
    if (size == 0) {
        return 0;
    }

    return common_hal_busio_uart_read(self, buf, size, errcode);
}

STATIC mp_uint_t busio_uart_write(mp_obj_t self_in, const void *buf_in, mp_uint_t size, int *errcode) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    const byte *buf = buf_in;

    return common_hal_busio_uart_write(self, buf, size, errcode);
}

STATIC mp_uint_t busio_uart_ioctl(mp_obj_t self_in, mp_uint_t request, mp_uint_t arg, int *errcode) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    mp_uint_t ret;
    if (request == MP_IOCTL_POLL) {
        mp_uint_t flags = arg;
        ret = 0;
        if ((flags & MP_IOCTL_POLL_RD) && common_hal_busio_uart_rx_characters_available(self) > 0) {
            ret |= MP_IOCTL_POLL_RD;
        }
        if ((flags & MP_IOCTL_POLL_WR) && common_hal_busio_uart_ready_to_tx(self)) {
            ret |= MP_IOCTL_POLL_WR;
        }
    } else {
        *errcode = MP_EINVAL;
        ret = MP_STREAM_ERROR;
    }
    return ret;
}

//|baudrate: Any =
//|"""The current baudrate."""
//|...
STATIC mp_obj_t busio_uart_obj_get_baudrate(mp_obj_t self_in) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    return MP_OBJ_NEW_SMALL_INT(common_hal_busio_uart_get_baudrate(self));
}
MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_get_baudrate_obj, busio_uart_obj_get_baudrate);

STATIC mp_obj_t busio_uart_obj_set_baudrate(mp_obj_t self_in, mp_obj_t baudrate) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    common_hal_busio_uart_set_baudrate(self, mp_obj_get_int(baudrate));
    return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_2(busio_uart_set_baudrate_obj, busio_uart_obj_set_baudrate);


const mp_obj_property_t busio_uart_baudrate_obj = {
    .base.type = &mp_type_property,
    .proxy = {(mp_obj_t)&busio_uart_get_baudrate_obj,
              (mp_obj_t)&busio_uart_set_baudrate_obj,
              (mp_obj_t)&mp_const_none_obj},
};

//|in_waiting: Any =
//|"""The number of bytes in the input buffer, available to be read"""
//|...
STATIC mp_obj_t busio_uart_obj_get_in_waiting(mp_obj_t self_in) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    return MP_OBJ_NEW_SMALL_INT(common_hal_busio_uart_rx_characters_available(self));
}
MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_get_in_waiting_obj, busio_uart_obj_get_in_waiting);

const mp_obj_property_t busio_uart_in_waiting_obj = {
    .base.type = &mp_type_property,
    .proxy = {(mp_obj_t)&busio_uart_get_in_waiting_obj,
              (mp_obj_t)&mp_const_none_obj,
              (mp_obj_t)&mp_const_none_obj},
};

//|timeout: Any =
//|"""The current timeout, in seconds (float)."""
//|...
STATIC mp_obj_t busio_uart_obj_get_timeout(mp_obj_t self_in) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    return mp_obj_new_float(common_hal_busio_uart_get_timeout(self));
}
MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_get_timeout_obj, busio_uart_obj_get_timeout);

STATIC mp_obj_t busio_uart_obj_set_timeout(mp_obj_t self_in, mp_obj_t timeout) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    mp_float_t timeout_float = mp_obj_get_float(timeout);
    validate_timeout(timeout_float);
    common_hal_busio_uart_set_timeout(self, timeout_float);
    return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_2(busio_uart_set_timeout_obj, busio_uart_obj_set_timeout);


const mp_obj_property_t busio_uart_timeout_obj = {
    .base.type = &mp_type_property,
    .proxy = {(mp_obj_t)&busio_uart_get_timeout_obj,
              (mp_obj_t)&busio_uart_set_timeout_obj,
              (mp_obj_t)&mp_const_none_obj},
};

//|def reset_input_buffer(self, ) -> Any:
//|"""Discard any unread characters in the input buffer."""
//|...
STATIC mp_obj_t busio_uart_obj_reset_input_buffer(mp_obj_t self_in) {
    busio_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
    check_for_deinit(self);
    common_hal_busio_uart_clear_rx_buffer(self);
    return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(busio_uart_reset_input_buffer_obj, busio_uart_obj_reset_input_buffer);

//|class busio:
//|def __init__(self, ):
//|"""Enum-like class to define the parity used to verify correct data transfer."""
//|ODD: Any =
//|"""Total number of ones should be odd."""
//|...
//|EVEN: Any =
//|"""Total number of ones should be even."""
//|...
//|...
const mp_obj_type_t busio_uart_parity_type;

const busio_uart_parity_obj_t busio_uart_parity_odd_obj = {
    { &busio_uart_parity_type },
};

const busio_uart_parity_obj_t busio_uart_parity_even_obj = {
    { &busio_uart_parity_type },
};

STATIC const mp_rom_map_elem_t busio_uart_parity_locals_dict_table[] = {
    { MP_ROM_QSTR(MP_QSTR_ODD),    MP_ROM_PTR(&busio_uart_parity_odd_obj) },
    { MP_ROM_QSTR(MP_QSTR_EVEN),   MP_ROM_PTR(&busio_uart_parity_even_obj) },
};
STATIC MP_DEFINE_CONST_DICT(busio_uart_parity_locals_dict, busio_uart_parity_locals_dict_table);

STATIC void busio_uart_parity_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
    qstr parity = MP_QSTR_ODD;
    if (MP_OBJ_TO_PTR(self_in) == MP_ROM_PTR(&busio_uart_parity_even_obj)) {
        parity = MP_QSTR_EVEN;
    }
    mp_printf(print, "%q.%q.%q.%q", MP_QSTR_busio, MP_QSTR_UART, MP_QSTR_Parity, parity);
}

const mp_obj_type_t busio_uart_parity_type = {
    { &mp_type_type },
    .name = MP_QSTR_Parity,
    .print = busio_uart_parity_print,
    .locals_dict = (mp_obj_t)&busio_uart_parity_locals_dict,
};

STATIC const mp_rom_map_elem_t busio_uart_locals_dict_table[] = {
    { MP_ROM_QSTR(MP_QSTR_deinit),       MP_ROM_PTR(&busio_uart_deinit_obj) },
    { MP_ROM_QSTR(MP_QSTR___enter__),    MP_ROM_PTR(&default___enter___obj) },
    { MP_ROM_QSTR(MP_QSTR___exit__),     MP_ROM_PTR(&busio_uart___exit___obj) },

    // Standard stream methods.
    { MP_OBJ_NEW_QSTR(MP_QSTR_read),     MP_ROM_PTR(&mp_stream_read_obj) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_readline), MP_ROM_PTR(&mp_stream_unbuffered_readline_obj)},
    { MP_OBJ_NEW_QSTR(MP_QSTR_readinto), MP_ROM_PTR(&mp_stream_readinto_obj) },
    { MP_OBJ_NEW_QSTR(MP_QSTR_write),    MP_ROM_PTR(&mp_stream_write_obj) },

    { MP_OBJ_NEW_QSTR(MP_QSTR_reset_input_buffer), MP_ROM_PTR(&busio_uart_reset_input_buffer_obj) },

    // Properties
    { MP_ROM_QSTR(MP_QSTR_baudrate),     MP_ROM_PTR(&busio_uart_baudrate_obj) },
    { MP_ROM_QSTR(MP_QSTR_in_waiting),   MP_ROM_PTR(&busio_uart_in_waiting_obj) },
    { MP_ROM_QSTR(MP_QSTR_timeout),      MP_ROM_PTR(&busio_uart_timeout_obj) },

    // Nested Enum-like Classes.
    { MP_ROM_QSTR(MP_QSTR_Parity),       MP_ROM_PTR(&busio_uart_parity_type) },
};
STATIC MP_DEFINE_CONST_DICT(busio_uart_locals_dict, busio_uart_locals_dict_table);

STATIC const mp_stream_p_t uart_stream_p = {
    MP_PROTO_IMPLEMENT(MP_QSTR_protocol_stream)
    .read = busio_uart_read,
    .write = busio_uart_write,
    .ioctl = busio_uart_ioctl,
    .is_text = false,
    // Match PySerial when possible, such as disallowing optional length argument for .readinto()
    .pyserial_compatibility = true,
};

const mp_obj_type_t busio_uart_type = {
    { &mp_type_type },
    .name = MP_QSTR_UART,
    .make_new = busio_uart_make_new,
    .getiter = mp_identity_getiter,
    .iternext = mp_stream_unbuffered_iter,
    .protocol = &uart_stream_p,
    .locals_dict = (mp_obj_dict_t*)&busio_uart_locals_dict,
};