931c7c1c51
This 2-in-1 PR started with the goal of support the Bangle.js 2 smartwatch with *no USB*. * Adds "secure" DFU build support with a committed private key. * Adds 3-bit color support with one dummy bit for the JDI memory display * Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK. This is needed because the Bangle.js 2 uses the watchdog to reset. * Renamed port_background_task() to port_background_tick() to indicate it runs on tick, not RUN_BACKGROUND_TASK. * Marks serial connected when the display terminal is inited. This means that safe mode messages show up on the display. ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that support as well. * Adds 3-bit ACeP color support for 7-color e-paper displays. (Not watch related but similar due to color depth.) * Allows a refresh sequence instead of a single int command. The 7" ACeP display requires a data byte for refresh. * Adds optional delay after resetting the display. The ACeP displays need this. (Probably to load LUTs from flash.) * Adds a cleaning phase for ACeP displays before the real refresh. For both: * Add dither support to Palette. * Palette no longer converts colors when set. Instead, it caches converted colors at each index. * ColorConverter now caches the last converted color. It should make conversions faster for repeated colors (not dithering.)
66 lines
3.7 KiB
C
66 lines
3.7 KiB
C
/*
|
|
* This file is part of the Micro Python project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#ifndef MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_EPAPERDISPLAY_H
|
|
#define MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_EPAPERDISPLAY_H
|
|
|
|
#include "common-hal/microcontroller/Pin.h"
|
|
|
|
#include "shared-module/displayio/EPaperDisplay.h"
|
|
#include "shared-module/displayio/Group.h"
|
|
|
|
extern const mp_obj_type_t displayio_epaperdisplay_type;
|
|
|
|
#define NO_COMMAND 0x100
|
|
|
|
void common_hal_displayio_epaperdisplay_construct(displayio_epaperdisplay_obj_t *self,
|
|
mp_obj_t bus, const uint8_t *start_sequence, uint16_t start_sequence_len, mp_float_t start_up_time, const uint8_t *stop_sequence, uint16_t stop_sequence_len,
|
|
uint16_t width, uint16_t height, uint16_t ram_width, uint16_t ram_height, int16_t colstart, int16_t rowstart, uint16_t rotation,
|
|
uint16_t set_column_window_command, uint16_t set_row_window_command,
|
|
uint16_t set_current_column_command, uint16_t set_current_row_command,
|
|
uint16_t write_black_ram_command, bool black_bits_inverted, uint16_t write_color_ram_command, bool color_bits_inverted, uint32_t highlight_color, const uint8_t *refresh_sequence, uint16_t refresh_sequence_len, mp_float_t refresh_time,
|
|
const mcu_pin_obj_t *busy_pin, bool busy_state, mp_float_t seconds_per_frame, bool always_toggle_chip_select, bool grayscale, bool acep, bool two_byte_sequence_length);
|
|
|
|
bool common_hal_displayio_epaperdisplay_refresh(displayio_epaperdisplay_obj_t *self);
|
|
|
|
bool common_hal_displayio_epaperdisplay_show(displayio_epaperdisplay_obj_t *self, displayio_group_t *root_group);
|
|
|
|
mp_obj_t common_hal_displayio_epaperdisplay_get_root_group(displayio_epaperdisplay_obj_t *self);
|
|
bool common_hal_displayio_epaperdisplay_set_root_group(displayio_epaperdisplay_obj_t *self, displayio_group_t *root_group);
|
|
|
|
// Returns time in milliseconds.
|
|
uint32_t common_hal_displayio_epaperdisplay_get_time_to_refresh(displayio_epaperdisplay_obj_t *self);
|
|
bool common_hal_displayio_epaperdisplay_get_busy(displayio_epaperdisplay_obj_t *self);
|
|
|
|
uint16_t common_hal_displayio_epaperdisplay_get_width(displayio_epaperdisplay_obj_t *self);
|
|
uint16_t common_hal_displayio_epaperdisplay_get_height(displayio_epaperdisplay_obj_t *self);
|
|
uint16_t common_hal_displayio_epaperdisplay_get_rotation(displayio_epaperdisplay_obj_t *self);
|
|
void common_hal_displayio_epaperdisplay_set_rotation(displayio_epaperdisplay_obj_t *self, int rotation);
|
|
|
|
mp_obj_t common_hal_displayio_epaperdisplay_get_bus(displayio_epaperdisplay_obj_t *self);
|
|
|
|
#endif // MICROPY_INCLUDED_SHARED_BINDINGS_DISPLAYIO_EPAPERDISPLAY_H
|