919e586e46
Some applications may want to adjust the hard coded 115200 REPL buadrate, and this commit allows it to be changed dynamically via machine.UART(0).
512 lines
18 KiB
C
512 lines
18 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2016 Damien P. George
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <string.h>
|
|
|
|
#include "driver/uart.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
|
|
#include "py/runtime.h"
|
|
#include "py/stream.h"
|
|
#include "py/mperrno.h"
|
|
#include "modmachine.h"
|
|
#include "uart.h"
|
|
|
|
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(4, 1, 0)
|
|
#define UART_INV_TX UART_INVERSE_TXD
|
|
#define UART_INV_RX UART_INVERSE_RXD
|
|
#define UART_INV_RTS UART_INVERSE_RTS
|
|
#define UART_INV_CTS UART_INVERSE_CTS
|
|
#else
|
|
#define UART_INV_TX UART_SIGNAL_TXD_INV
|
|
#define UART_INV_RX UART_SIGNAL_RXD_INV
|
|
#define UART_INV_RTS UART_SIGNAL_RTS_INV
|
|
#define UART_INV_CTS UART_SIGNAL_CTS_INV
|
|
#endif
|
|
|
|
#define UART_INV_MASK (UART_INV_TX | UART_INV_RX | UART_INV_RTS | UART_INV_CTS)
|
|
|
|
typedef struct _machine_uart_obj_t {
|
|
mp_obj_base_t base;
|
|
uart_port_t uart_num;
|
|
uart_hw_flowcontrol_t flowcontrol;
|
|
uint8_t bits;
|
|
uint8_t parity;
|
|
uint8_t stop;
|
|
int8_t tx;
|
|
int8_t rx;
|
|
int8_t rts;
|
|
int8_t cts;
|
|
uint16_t txbuf;
|
|
uint16_t rxbuf;
|
|
uint16_t timeout; // timeout waiting for first char (in ms)
|
|
uint16_t timeout_char; // timeout waiting between chars (in ms)
|
|
uint32_t invert; // lines to invert
|
|
} machine_uart_obj_t;
|
|
|
|
STATIC const char *_parity_name[] = {"None", "1", "0"};
|
|
|
|
/******************************************************************************/
|
|
// MicroPython bindings for UART
|
|
|
|
STATIC void machine_uart_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
|
|
machine_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
uint32_t baudrate;
|
|
uart_get_baudrate(self->uart_num, &baudrate);
|
|
mp_printf(print, "UART(%u, baudrate=%u, bits=%u, parity=%s, stop=%u, tx=%d, rx=%d, rts=%d, cts=%d, txbuf=%u, rxbuf=%u, timeout=%u, timeout_char=%u",
|
|
self->uart_num, baudrate, self->bits, _parity_name[self->parity],
|
|
self->stop, self->tx, self->rx, self->rts, self->cts, self->txbuf, self->rxbuf, self->timeout, self->timeout_char);
|
|
if (self->invert) {
|
|
mp_printf(print, ", invert=");
|
|
uint32_t invert_mask = self->invert;
|
|
if (invert_mask & UART_INV_TX) {
|
|
mp_printf(print, "INV_TX");
|
|
invert_mask &= ~UART_INV_TX;
|
|
if (invert_mask) {
|
|
mp_printf(print, "|");
|
|
}
|
|
}
|
|
if (invert_mask & UART_INV_RX) {
|
|
mp_printf(print, "INV_RX");
|
|
invert_mask &= ~UART_INV_RX;
|
|
if (invert_mask) {
|
|
mp_printf(print, "|");
|
|
}
|
|
}
|
|
if (invert_mask & UART_INV_RTS) {
|
|
mp_printf(print, "INV_RTS");
|
|
invert_mask &= ~UART_INV_RTS;
|
|
if (invert_mask) {
|
|
mp_printf(print, "|");
|
|
}
|
|
}
|
|
if (invert_mask & UART_INV_CTS) {
|
|
mp_printf(print, "INV_CTS");
|
|
}
|
|
}
|
|
if (self->flowcontrol) {
|
|
mp_printf(print, ", flow=");
|
|
uint32_t flow_mask = self->flowcontrol;
|
|
if (flow_mask & UART_HW_FLOWCTRL_RTS) {
|
|
mp_printf(print, "RTS");
|
|
flow_mask &= ~UART_HW_FLOWCTRL_RTS;
|
|
if (flow_mask) {
|
|
mp_printf(print, "|");
|
|
}
|
|
}
|
|
if (flow_mask & UART_HW_FLOWCTRL_CTS) {
|
|
mp_printf(print, "CTS");
|
|
}
|
|
}
|
|
mp_printf(print, ")");
|
|
}
|
|
|
|
STATIC void machine_uart_init_helper(machine_uart_obj_t *self, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
|
|
enum { ARG_baudrate, ARG_bits, ARG_parity, ARG_stop, ARG_tx, ARG_rx, ARG_rts, ARG_cts, ARG_txbuf, ARG_rxbuf, ARG_timeout, ARG_timeout_char, ARG_invert, ARG_flow };
|
|
static const mp_arg_t allowed_args[] = {
|
|
{ MP_QSTR_baudrate, MP_ARG_INT, {.u_int = 0} },
|
|
{ MP_QSTR_bits, MP_ARG_INT, {.u_int = 0} },
|
|
{ MP_QSTR_parity, MP_ARG_OBJ, {.u_obj = MP_OBJ_NULL} },
|
|
{ MP_QSTR_stop, MP_ARG_INT, {.u_int = 0} },
|
|
{ MP_QSTR_tx, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = UART_PIN_NO_CHANGE} },
|
|
{ MP_QSTR_rx, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = UART_PIN_NO_CHANGE} },
|
|
{ MP_QSTR_rts, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = UART_PIN_NO_CHANGE} },
|
|
{ MP_QSTR_cts, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = UART_PIN_NO_CHANGE} },
|
|
{ MP_QSTR_txbuf, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
|
|
{ MP_QSTR_rxbuf, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = -1} },
|
|
{ MP_QSTR_timeout, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
|
|
{ MP_QSTR_timeout_char, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
|
|
{ MP_QSTR_invert, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
|
|
{ MP_QSTR_flow, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} },
|
|
};
|
|
mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
|
|
mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
|
|
|
|
// wait for all data to be transmitted before changing settings
|
|
uart_wait_tx_done(self->uart_num, pdMS_TO_TICKS(1000));
|
|
|
|
if (args[ARG_txbuf].u_int >= 0 || args[ARG_rxbuf].u_int >= 0) {
|
|
// must reinitialise driver to change the tx/rx buffer size
|
|
if (self->uart_num == MICROPY_HW_UART_REPL) {
|
|
mp_raise_ValueError(MP_ERROR_TEXT("UART buffer size is fixed"));
|
|
}
|
|
|
|
if (args[ARG_txbuf].u_int >= 0) {
|
|
self->txbuf = args[ARG_txbuf].u_int;
|
|
}
|
|
if (args[ARG_rxbuf].u_int >= 0) {
|
|
self->rxbuf = args[ARG_rxbuf].u_int;
|
|
}
|
|
uart_config_t uartcfg = {
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.rx_flow_ctrl_thresh = 0
|
|
};
|
|
uint32_t baudrate;
|
|
uart_get_baudrate(self->uart_num, &baudrate);
|
|
uartcfg.baud_rate = baudrate;
|
|
uart_get_word_length(self->uart_num, &uartcfg.data_bits);
|
|
uart_get_parity(self->uart_num, &uartcfg.parity);
|
|
uart_get_stop_bits(self->uart_num, &uartcfg.stop_bits);
|
|
uart_driver_delete(self->uart_num);
|
|
uart_param_config(self->uart_num, &uartcfg);
|
|
uart_driver_install(self->uart_num, self->rxbuf, self->txbuf, 0, NULL, 0);
|
|
}
|
|
|
|
// set baudrate
|
|
uint32_t baudrate = 115200;
|
|
if (args[ARG_baudrate].u_int > 0) {
|
|
uart_set_baudrate(self->uart_num, args[ARG_baudrate].u_int);
|
|
uart_get_baudrate(self->uart_num, &baudrate);
|
|
}
|
|
|
|
uart_set_pin(self->uart_num, args[ARG_tx].u_int, args[ARG_rx].u_int, args[ARG_rts].u_int, args[ARG_cts].u_int);
|
|
if (args[ARG_tx].u_int != UART_PIN_NO_CHANGE) {
|
|
self->tx = args[ARG_tx].u_int;
|
|
}
|
|
|
|
if (args[ARG_rx].u_int != UART_PIN_NO_CHANGE) {
|
|
self->rx = args[ARG_rx].u_int;
|
|
}
|
|
|
|
if (args[ARG_rts].u_int != UART_PIN_NO_CHANGE) {
|
|
self->rts = args[ARG_rts].u_int;
|
|
}
|
|
|
|
if (args[ARG_cts].u_int != UART_PIN_NO_CHANGE) {
|
|
self->cts = args[ARG_cts].u_int;
|
|
}
|
|
|
|
// set data bits
|
|
switch (args[ARG_bits].u_int) {
|
|
case 0:
|
|
break;
|
|
case 5:
|
|
uart_set_word_length(self->uart_num, UART_DATA_5_BITS);
|
|
self->bits = 5;
|
|
break;
|
|
case 6:
|
|
uart_set_word_length(self->uart_num, UART_DATA_6_BITS);
|
|
self->bits = 6;
|
|
break;
|
|
case 7:
|
|
uart_set_word_length(self->uart_num, UART_DATA_7_BITS);
|
|
self->bits = 7;
|
|
break;
|
|
case 8:
|
|
uart_set_word_length(self->uart_num, UART_DATA_8_BITS);
|
|
self->bits = 8;
|
|
break;
|
|
default:
|
|
mp_raise_ValueError(MP_ERROR_TEXT("invalid data bits"));
|
|
break;
|
|
}
|
|
|
|
// set parity
|
|
if (args[ARG_parity].u_obj != MP_OBJ_NULL) {
|
|
if (args[ARG_parity].u_obj == mp_const_none) {
|
|
uart_set_parity(self->uart_num, UART_PARITY_DISABLE);
|
|
self->parity = 0;
|
|
} else {
|
|
mp_int_t parity = mp_obj_get_int(args[ARG_parity].u_obj);
|
|
if (parity & 1) {
|
|
uart_set_parity(self->uart_num, UART_PARITY_ODD);
|
|
self->parity = 1;
|
|
} else {
|
|
uart_set_parity(self->uart_num, UART_PARITY_EVEN);
|
|
self->parity = 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
// set stop bits
|
|
switch (args[ARG_stop].u_int) {
|
|
// FIXME: ESP32 also supports 1.5 stop bits
|
|
case 0:
|
|
break;
|
|
case 1:
|
|
uart_set_stop_bits(self->uart_num, UART_STOP_BITS_1);
|
|
self->stop = 1;
|
|
break;
|
|
case 2:
|
|
uart_set_stop_bits(self->uart_num, UART_STOP_BITS_2);
|
|
self->stop = 2;
|
|
break;
|
|
default:
|
|
mp_raise_ValueError(MP_ERROR_TEXT("invalid stop bits"));
|
|
break;
|
|
}
|
|
|
|
// set timeout
|
|
self->timeout = args[ARG_timeout].u_int;
|
|
|
|
// set timeout_char
|
|
// make sure it is at least as long as a whole character (13 bits to be safe)
|
|
self->timeout_char = args[ARG_timeout_char].u_int;
|
|
uint32_t min_timeout_char = 13000 / baudrate + 1;
|
|
if (self->timeout_char < min_timeout_char) {
|
|
self->timeout_char = min_timeout_char;
|
|
}
|
|
|
|
// set line inversion
|
|
if (args[ARG_invert].u_int & ~UART_INV_MASK) {
|
|
mp_raise_ValueError(MP_ERROR_TEXT("invalid inversion mask"));
|
|
}
|
|
self->invert = args[ARG_invert].u_int;
|
|
uart_set_line_inverse(self->uart_num, self->invert);
|
|
|
|
// set hardware flow control
|
|
if (args[ARG_flow].u_int & ~UART_HW_FLOWCTRL_CTS_RTS) {
|
|
mp_raise_ValueError(MP_ERROR_TEXT("invalid flow control mask"));
|
|
}
|
|
self->flowcontrol = args[ARG_flow].u_int;
|
|
uart_set_hw_flow_ctrl(self->uart_num, self->flowcontrol, UART_FIFO_LEN - UART_FIFO_LEN / 4);
|
|
}
|
|
|
|
STATIC mp_obj_t machine_uart_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) {
|
|
mp_arg_check_num(n_args, n_kw, 1, MP_OBJ_FUN_ARGS_MAX, true);
|
|
|
|
// get uart id
|
|
mp_int_t uart_num = mp_obj_get_int(args[0]);
|
|
if (uart_num < 0 || uart_num >= UART_NUM_MAX) {
|
|
mp_raise_msg_varg(&mp_type_ValueError, MP_ERROR_TEXT("UART(%d) does not exist"), uart_num);
|
|
}
|
|
|
|
// Defaults
|
|
uart_config_t uartcfg = {
|
|
.baud_rate = 115200,
|
|
.data_bits = UART_DATA_8_BITS,
|
|
.parity = UART_PARITY_DISABLE,
|
|
.stop_bits = UART_STOP_BITS_1,
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.rx_flow_ctrl_thresh = 0
|
|
};
|
|
|
|
// create instance
|
|
machine_uart_obj_t *self = m_new_obj(machine_uart_obj_t);
|
|
self->base.type = &machine_uart_type;
|
|
self->uart_num = uart_num;
|
|
self->bits = 8;
|
|
self->parity = 0;
|
|
self->stop = 1;
|
|
self->rts = UART_PIN_NO_CHANGE;
|
|
self->cts = UART_PIN_NO_CHANGE;
|
|
self->txbuf = 256;
|
|
self->rxbuf = 256; // IDF minimum
|
|
self->timeout = 0;
|
|
self->timeout_char = 0;
|
|
|
|
switch (uart_num) {
|
|
case UART_NUM_0:
|
|
self->rx = UART_PIN_NO_CHANGE; // GPIO 3
|
|
self->tx = UART_PIN_NO_CHANGE; // GPIO 1
|
|
break;
|
|
case UART_NUM_1:
|
|
self->rx = 9;
|
|
self->tx = 10;
|
|
break;
|
|
#if SOC_UART_NUM > 2
|
|
case UART_NUM_2:
|
|
self->rx = 16;
|
|
self->tx = 17;
|
|
break;
|
|
#endif
|
|
}
|
|
|
|
// Only reset the driver if it's not the REPL UART.
|
|
if (uart_num != MICROPY_HW_UART_REPL) {
|
|
// Remove any existing configuration
|
|
uart_driver_delete(self->uart_num);
|
|
|
|
// init the peripheral
|
|
// Setup
|
|
uart_param_config(self->uart_num, &uartcfg);
|
|
|
|
uart_driver_install(uart_num, self->rxbuf, self->txbuf, 0, NULL, 0);
|
|
}
|
|
|
|
mp_map_t kw_args;
|
|
mp_map_init_fixed_table(&kw_args, n_kw, args + n_args);
|
|
machine_uart_init_helper(self, n_args - 1, args + 1, &kw_args);
|
|
|
|
// Make sure pins are connected.
|
|
uart_set_pin(self->uart_num, self->tx, self->rx, self->rts, self->cts);
|
|
|
|
return MP_OBJ_FROM_PTR(self);
|
|
}
|
|
|
|
STATIC mp_obj_t machine_uart_init(size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) {
|
|
machine_uart_init_helper(args[0], n_args - 1, args + 1, kw_args);
|
|
return mp_const_none;
|
|
}
|
|
MP_DEFINE_CONST_FUN_OBJ_KW(machine_uart_init_obj, 1, machine_uart_init);
|
|
|
|
STATIC mp_obj_t machine_uart_deinit(mp_obj_t self_in) {
|
|
machine_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
uart_driver_delete(self->uart_num);
|
|
return mp_const_none;
|
|
}
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_uart_deinit_obj, machine_uart_deinit);
|
|
|
|
STATIC mp_obj_t machine_uart_any(mp_obj_t self_in) {
|
|
machine_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
size_t rxbufsize;
|
|
uart_get_buffered_data_len(self->uart_num, &rxbufsize);
|
|
return MP_OBJ_NEW_SMALL_INT(rxbufsize);
|
|
}
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_uart_any_obj, machine_uart_any);
|
|
|
|
STATIC mp_obj_t machine_uart_sendbreak(mp_obj_t self_in) {
|
|
machine_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
|
|
// Save settings
|
|
uart_word_length_t word_length;
|
|
uart_parity_t parity;
|
|
uart_get_word_length(self->uart_num, &word_length);
|
|
uart_get_parity(self->uart_num, &parity);
|
|
|
|
// Synthesise the break condition by either a longer word or using even parity
|
|
uart_wait_tx_done(self->uart_num, pdMS_TO_TICKS(1000));
|
|
if (word_length != UART_DATA_8_BITS) {
|
|
uart_set_word_length(self->uart_num, UART_DATA_8_BITS);
|
|
} else if (parity == UART_PARITY_DISABLE) {
|
|
uart_set_parity(self->uart_num, UART_PARITY_EVEN);
|
|
} else {
|
|
// Cannot synthesise break
|
|
mp_raise_OSError(MP_EPERM);
|
|
}
|
|
char buf[1] = {0};
|
|
uart_write_bytes(self->uart_num, buf, 1);
|
|
uart_wait_tx_done(self->uart_num, pdMS_TO_TICKS(1000));
|
|
|
|
// Restore original settings
|
|
uart_set_word_length(self->uart_num, word_length);
|
|
uart_set_parity(self->uart_num, parity);
|
|
|
|
return mp_const_none;
|
|
}
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_1(machine_uart_sendbreak_obj, machine_uart_sendbreak);
|
|
|
|
STATIC const mp_rom_map_elem_t machine_uart_locals_dict_table[] = {
|
|
{ MP_ROM_QSTR(MP_QSTR_init), MP_ROM_PTR(&machine_uart_init_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&machine_uart_deinit_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_any), MP_ROM_PTR(&machine_uart_any_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_read), MP_ROM_PTR(&mp_stream_read_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_readline), MP_ROM_PTR(&mp_stream_unbuffered_readline_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_readinto), MP_ROM_PTR(&mp_stream_readinto_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_write), MP_ROM_PTR(&mp_stream_write_obj) },
|
|
{ MP_ROM_QSTR(MP_QSTR_sendbreak), MP_ROM_PTR(&machine_uart_sendbreak_obj) },
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_INV_TX), MP_ROM_INT(UART_INV_TX) },
|
|
{ MP_ROM_QSTR(MP_QSTR_INV_RX), MP_ROM_INT(UART_INV_RX) },
|
|
{ MP_ROM_QSTR(MP_QSTR_INV_RTS), MP_ROM_INT(UART_INV_RTS) },
|
|
{ MP_ROM_QSTR(MP_QSTR_INV_CTS), MP_ROM_INT(UART_INV_CTS) },
|
|
|
|
{ MP_ROM_QSTR(MP_QSTR_RTS), MP_ROM_INT(UART_HW_FLOWCTRL_RTS) },
|
|
{ MP_ROM_QSTR(MP_QSTR_CTS), MP_ROM_INT(UART_HW_FLOWCTRL_CTS) },
|
|
};
|
|
|
|
STATIC MP_DEFINE_CONST_DICT(machine_uart_locals_dict, machine_uart_locals_dict_table);
|
|
|
|
STATIC mp_uint_t machine_uart_read(mp_obj_t self_in, void *buf_in, mp_uint_t size, int *errcode) {
|
|
machine_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
|
|
// make sure we want at least 1 char
|
|
if (size == 0) {
|
|
return 0;
|
|
}
|
|
|
|
TickType_t time_to_wait;
|
|
if (self->timeout == 0) {
|
|
time_to_wait = 0;
|
|
} else {
|
|
time_to_wait = pdMS_TO_TICKS(self->timeout);
|
|
}
|
|
|
|
int bytes_read = uart_read_bytes(self->uart_num, buf_in, size, time_to_wait);
|
|
|
|
if (bytes_read <= 0) {
|
|
*errcode = MP_EAGAIN;
|
|
return MP_STREAM_ERROR;
|
|
}
|
|
|
|
return bytes_read;
|
|
}
|
|
|
|
STATIC mp_uint_t machine_uart_write(mp_obj_t self_in, const void *buf_in, mp_uint_t size, int *errcode) {
|
|
machine_uart_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
|
|
int bytes_written = uart_write_bytes(self->uart_num, buf_in, size);
|
|
|
|
if (bytes_written < 0) {
|
|
*errcode = MP_EAGAIN;
|
|
return MP_STREAM_ERROR;
|
|
}
|
|
|
|
// return number of bytes written
|
|
return bytes_written;
|
|
}
|
|
|
|
STATIC mp_uint_t machine_uart_ioctl(mp_obj_t self_in, mp_uint_t request, uintptr_t arg, int *errcode) {
|
|
machine_uart_obj_t *self = self_in;
|
|
mp_uint_t ret;
|
|
if (request == MP_STREAM_POLL) {
|
|
mp_uint_t flags = arg;
|
|
ret = 0;
|
|
size_t rxbufsize;
|
|
uart_get_buffered_data_len(self->uart_num, &rxbufsize);
|
|
if ((flags & MP_STREAM_POLL_RD) && rxbufsize > 0) {
|
|
ret |= MP_STREAM_POLL_RD;
|
|
}
|
|
if ((flags & MP_STREAM_POLL_WR) && 1) { // FIXME: uart_tx_any_room(self->uart_num)
|
|
ret |= MP_STREAM_POLL_WR;
|
|
}
|
|
} else {
|
|
*errcode = MP_EINVAL;
|
|
ret = MP_STREAM_ERROR;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
STATIC const mp_stream_p_t uart_stream_p = {
|
|
.read = machine_uart_read,
|
|
.write = machine_uart_write,
|
|
.ioctl = machine_uart_ioctl,
|
|
.is_text = false,
|
|
};
|
|
|
|
const mp_obj_type_t machine_uart_type = {
|
|
{ &mp_type_type },
|
|
.name = MP_QSTR_UART,
|
|
.print = machine_uart_print,
|
|
.make_new = machine_uart_make_new,
|
|
.getiter = mp_identity_getiter,
|
|
.iternext = mp_stream_unbuffered_iter,
|
|
.protocol = &uart_stream_p,
|
|
.locals_dict = (mp_obj_dict_t *)&machine_uart_locals_dict,
|
|
};
|