8e54225140
The new teensy loader keeps the file system under certain conditions: - The file size is properly set in the file header. - The header version is 4.3 These changes are implemented here, requiring a backport of fsl_flexspi_nor_boot.c. There is still a problem with the command line version of the teensy loader, which fails on the first attempt. At the second attempt it works. The GUI version of the teensy loader is fine.
493 lines
15 KiB
Makefile
493 lines
15 KiB
Makefile
# =============================================================================
|
|
# Parameter Configuration
|
|
# =============================================================================
|
|
|
|
BOARD ?= TEENSY40
|
|
BOARD_DIR ?= boards/$(BOARD)
|
|
BUILD ?= build-$(BOARD)
|
|
PORT ?= /dev/ttyACM0
|
|
CROSS_COMPILE ?= arm-none-eabi-
|
|
GIT_SUBMODULES += lib/tinyusb lib/nxp_driver lib/lwip lib/mbedtls
|
|
|
|
# MicroPython feature configurations
|
|
FROZEN_MANIFEST ?= boards/manifest.py
|
|
MICROPY_VFS_LFS2 ?= 1
|
|
MICROPY_VFS_FAT ?= 1
|
|
|
|
# qstr definitions (must come before including py.mk)
|
|
QSTR_DEFS = qstrdefsport.h
|
|
QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
|
|
|
|
# Generation scripts
|
|
MAKE_PINS = boards/make-pins.py
|
|
MAKE_FLEXRAM_LD = boards/make-flexram-config.py
|
|
|
|
# Include py make environment
|
|
include ../../py/mkenv.mk
|
|
|
|
# Include micropython configuration board makefile
|
|
ifeq ($(wildcard $(BOARD_DIR)/.),)
|
|
$(error Invalid BOARD specified: $(BOARD_DIR))
|
|
endif
|
|
include $(BOARD_DIR)/mpconfigboard.mk
|
|
|
|
# Include py core make definitions
|
|
include $(TOP)/py/py.mk
|
|
include $(TOP)/extmod/extmod.mk
|
|
|
|
# Set SDK directory based on MCU_SERIES
|
|
MCU_DIR = lib/nxp_driver/sdk/devices/$(MCU_SERIES)
|
|
|
|
# Select linker scripts based on MCU_SERIES
|
|
LD_FILES = boards/$(MCU_SERIES).ld boards/common.ld
|
|
|
|
# Parameter configurations for generation
|
|
AF_FILE = boards/$(MCU_SERIES)_af.csv
|
|
BOARD_PINS = $(BOARD_DIR)/pins.csv
|
|
PREFIX_FILE = boards/mimxrt_prefix.c
|
|
GEN_FLEXRAM_CONFIG_SRC = $(BUILD)/flexram_config.s
|
|
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
|
|
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
|
|
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
|
|
GEN_PINS_QSTR = $(BUILD)/pins_qstr.h
|
|
GEN_PINS_SRC = $(BUILD)/pins_gen.c
|
|
|
|
# =============================================================================
|
|
# Includes
|
|
# =============================================================================
|
|
|
|
INC += -I$(BOARD_DIR)
|
|
INC += -I$(BUILD)
|
|
INC += -I$(TOP)
|
|
INC += -I$(TOP)/$(MCU_DIR)
|
|
INC += -I$(TOP)/$(MCU_DIR)/drivers
|
|
INC += -I$(TOP)/lib/cmsis/inc
|
|
INC += -I$(TOP)/lib/oofatfs
|
|
INC += -I$(TOP)/lib/tinyusb/hw
|
|
INC += -I$(TOP)/lib/tinyusb/hw/bsp/teensy_40
|
|
INC += -I$(TOP)/lib/tinyusb/src
|
|
INC += -I.
|
|
INC += -Ihal
|
|
|
|
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
|
|
ifeq ($(MICROPY_PY_LWIP),1)
|
|
INC += -Ilwip_inc
|
|
INC += -Ihal/phy
|
|
endif
|
|
|
|
# =============================================================================
|
|
# Sources
|
|
# =============================================================================
|
|
|
|
# TinyUSB Stack source
|
|
SRC_TINYUSB_C += \
|
|
lib/tinyusb/src/class/cdc/cdc_device.c \
|
|
lib/tinyusb/src/class/dfu/dfu_rt_device.c \
|
|
lib/tinyusb/src/class/hid/hid_device.c \
|
|
lib/tinyusb/src/class/midi/midi_device.c \
|
|
lib/tinyusb/src/class/msc/msc_device.c \
|
|
lib/tinyusb/src/class/usbtmc/usbtmc_device.c \
|
|
lib/tinyusb/src/class/vendor/vendor_device.c \
|
|
lib/tinyusb/src/common/tusb_fifo.c \
|
|
lib/tinyusb/src/device/usbd.c \
|
|
lib/tinyusb/src/device/usbd_control.c \
|
|
lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c \
|
|
lib/tinyusb/src/tusb.c
|
|
|
|
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
|
|
ifeq ($(MICROPY_PY_LWIP),1)
|
|
SRC_ETH_C += \
|
|
$(MCU_DIR)/drivers/fsl_enet.c \
|
|
hal/phy/device/phydp83825/fsl_phydp83825.c \
|
|
hal/phy/device/phydp83848/fsl_phydp83848.c \
|
|
hal/phy/device/phyksz8081/fsl_phyksz8081.c \
|
|
hal/phy/device/phylan8720/fsl_phylan8720.c \
|
|
hal/phy/mdio/enet/fsl_enet_mdio.c
|
|
endif
|
|
|
|
# NXP SDK sources
|
|
SRC_HAL_IMX_C += \
|
|
$(MCU_DIR)/drivers/fsl_adc.c \
|
|
$(MCU_DIR)/drivers/fsl_cache.c \
|
|
$(MCU_DIR)/drivers/fsl_clock.c \
|
|
$(MCU_DIR)/drivers/fsl_common.c \
|
|
$(MCU_DIR)/drivers/fsl_dmamux.c \
|
|
$(MCU_DIR)/drivers/fsl_edma.c \
|
|
$(MCU_DIR)/drivers/fsl_flexram.c \
|
|
$(MCU_DIR)/drivers/fsl_flexspi.c \
|
|
$(MCU_DIR)/drivers/fsl_gpio.c \
|
|
$(MCU_DIR)/drivers/fsl_gpt.c \
|
|
$(MCU_DIR)/drivers/fsl_lpi2c.c \
|
|
$(MCU_DIR)/drivers/fsl_lpspi.c \
|
|
$(MCU_DIR)/drivers/fsl_lpspi_edma.c \
|
|
$(MCU_DIR)/drivers/fsl_lpuart.c \
|
|
$(MCU_DIR)/drivers/fsl_pit.c \
|
|
$(MCU_DIR)/drivers/fsl_pwm.c \
|
|
$(MCU_DIR)/drivers/fsl_sai.c \
|
|
$(MCU_DIR)/drivers/fsl_snvs_lp.c \
|
|
$(MCU_DIR)/drivers/fsl_trng.c \
|
|
$(MCU_DIR)/drivers/fsl_wdog.c \
|
|
$(MCU_DIR)/system_$(MCU_SERIES).c \
|
|
hal/fsl_flexspi_nor_boot.c \
|
|
|
|
ifeq ($(MICROPY_HW_SDRAM_AVAIL),1)
|
|
SRC_HAL_IMX_C += $(MCU_DIR)/drivers/fsl_semc.c
|
|
endif
|
|
|
|
ifeq ($(MICROPY_PY_MACHINE_SDCARD),1)
|
|
SRC_HAL_IMX_C += $(MCU_DIR)/drivers/fsl_usdhc.c
|
|
endif
|
|
|
|
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES), MIMXRT1015 MIMXRT1021 MIMXRT1052 MIMXRT1062 MIMXRT1064))
|
|
SRC_HAL_IMX_C += \
|
|
$(MCU_DIR)/drivers/fsl_qtmr.c
|
|
endif
|
|
|
|
# C source files
|
|
SRC_C += \
|
|
board_init.c \
|
|
boards/$(MCU_SERIES)_clock_config.c \
|
|
dma_manager.c \
|
|
drivers/bus/softspi.c \
|
|
drivers/dht/dht.c \
|
|
eth.c \
|
|
extmod/modnetwork.c \
|
|
extmod/modonewire.c \
|
|
extmod/modusocket.c \
|
|
extmod/uos_dupterm.c \
|
|
fatfs_port.c \
|
|
hal/pwm_backport.c \
|
|
led.c \
|
|
machine_adc.c \
|
|
machine_bitstream.c \
|
|
machine_i2c.c \
|
|
machine_i2s.c \
|
|
machine_led.c \
|
|
machine_pin.c \
|
|
machine_rtc.c \
|
|
machine_sdcard.c \
|
|
machine_spi.c \
|
|
machine_timer.c \
|
|
machine_uart.c \
|
|
machine_wdt.c \
|
|
main.c \
|
|
mbedtls/mbedtls_port.c \
|
|
mimxrt_flash.c \
|
|
mimxrt_sdram.c \
|
|
modmachine.c \
|
|
modmimxrt.c \
|
|
modutime.c \
|
|
mphalport.c \
|
|
mpnetworkport.c \
|
|
network_lan.c \
|
|
pendsv.c \
|
|
pin.c \
|
|
sdcard.c \
|
|
shared/libc/printf.c \
|
|
shared/libc/string0.c \
|
|
shared/netutils/dhcpserver.c \
|
|
shared/netutils/netutils.c \
|
|
shared/netutils/trace.c \
|
|
shared/readline/readline.c \
|
|
shared/runtime/gchelper_native.c \
|
|
shared/runtime/interrupt_char.c \
|
|
shared/runtime/mpirq.c \
|
|
shared/runtime/pyexec.c \
|
|
shared/runtime/stdout_helpers.c \
|
|
shared/runtime/sys_stdio_mphal.c \
|
|
shared/timeutils/timeutils.c \
|
|
systick.c \
|
|
ticks.c \
|
|
tusb_port.c \
|
|
$(SRC_TINYUSB_C) \
|
|
$(SRC_HAL_IMX_C) \
|
|
$(SRC_ETH_C)
|
|
|
|
# Add sources for respective board flash type
|
|
ifeq ($(MICROPY_HW_FLASH_TYPE),$(filter $(MICROPY_HW_FLASH_TYPE),qspi_nor_flash qspi_hyper_flash))
|
|
# Add hal/flexspi_nor_flash.c or hal/flashspi_hyper_flash.c respectively
|
|
SRC_C += hal/flexspi_$(subst qspi_,,$(MICROPY_HW_FLASH_TYPE)).c
|
|
#
|
|
# Add custom (board specific) or default configuration
|
|
ifeq ($(MICROPY_HW_BOARD_FLASH_FILES),1)
|
|
SRC_C += $(BOARD_DIR)/$(MICROPY_HW_FLASH_TYPE)_config.c
|
|
else
|
|
SRC_C += hal/$(MICROPY_HW_FLASH_TYPE)_config.c
|
|
endif
|
|
else
|
|
$(error Error: Unknown board flash type $(MICROPY_HW_FLASH_TYPE))
|
|
endif
|
|
|
|
# Math library source files
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
LIBM_SRC_C += $(addprefix lib/libm_dbl/,\
|
|
__cos.c __expo2.c __fpclassify.c __rem_pio2.c __rem_pio2_large.c __signbit.c __sin.c __tan.c acos.c acosh.c \
|
|
asin.c asinh.c atan.c atan2.c atanh.c ceil.c copysign.c cos.c cosh.c erf.c exp.c expm1.c floor.c fmod.c \
|
|
frexp.c ldexp.c lgamma.c log.c log10.c log1p.c modf.c nearbyint.c pow.c rint.c round.c scalbn.c sin.c \
|
|
sinh.c tan.c tanh.c tgamma.c trunc.c)
|
|
#
|
|
ifeq ($(SUPPORTS_HARDWARE_FP_DOUBLE),1)
|
|
LIBM_SRC_C += lib/libm_dbl/thumb_vfp_sqrt.c
|
|
else
|
|
LIBM_SRC_C += lib/libm_dbl/sqrt.c
|
|
endif
|
|
else
|
|
LIBM_SRC_C += $(addprefix lib/libm/,\
|
|
acoshf.c asinfacosf.c asinhf.c atan2f.c atanf.c atanhf.c ef_rem_pio2.c erf_lgamma.c fmodf.c kf_cos.c \
|
|
kf_rem_pio2.c kf_sin.c kf_tan.c log1pf.c math.c nearbyintf.c roundf.c sf_cos.c sf_erf.c sf_frexp.c sf_ldexp.c \
|
|
sf_modf.c sf_sin.c sf_tan.c wf_lgamma.c wf_tgamma.c)
|
|
ifeq ($(SUPPORTS_HARDWARE_FP_SINGLE),1)
|
|
LIBM_SRC_C += lib/libm/thumb_vfp_sqrtf.c
|
|
else
|
|
LIBM_SRC_C += lib/libm/ef_sqrt.c
|
|
endif
|
|
endif
|
|
|
|
# Reset variables
|
|
SUPPORTS_HARDWARE_FP_SINGLE = 0
|
|
SUPPORTS_HARDWARE_FP_DOUBLE = 0
|
|
|
|
# Assembly source files
|
|
SRC_SS = \
|
|
$(MCU_DIR)/gcc/startup_$(MCU_SERIES).S \
|
|
hal/resethandler_MIMXRT10xx.S
|
|
|
|
SRC_S += shared/runtime/gchelper_m3.s \
|
|
|
|
# =============================================================================
|
|
# QSTR Sources
|
|
# =============================================================================
|
|
|
|
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
|
|
ifeq ($(MICROPY_PY_LWIP),1)
|
|
SRC_QSTR += \
|
|
extmod/modlwip.c \
|
|
extmod/modnetwork.c \
|
|
extmod/modusocket.c \
|
|
extmod/moduwebsocket.c \
|
|
network_lan.c
|
|
endif
|
|
|
|
# List of sources for qstr extraction
|
|
SRC_QSTR += \
|
|
extmod/modonewire.c \
|
|
extmod/uos_dupterm.c \
|
|
machine_adc.c \
|
|
machine_i2s.c \
|
|
machine_led.c \
|
|
machine_pin.c \
|
|
machine_pwm.c \
|
|
machine_rtc.c \
|
|
machine_sdcard.c \
|
|
machine_spi.c \
|
|
machine_timer.c \
|
|
machine_uart.c \
|
|
machine_wdt.c \
|
|
mimxrt_flash.c \
|
|
modmachine.c \
|
|
modmimxrt.c \
|
|
modutime.c \
|
|
pin.c \
|
|
shared/readline/readline.c \
|
|
shared/runtime/mpirq.c \
|
|
shared/runtime/sys_stdio_mphal.c \
|
|
$(GEN_PINS_SRC)
|
|
|
|
# =============================================================================
|
|
# Compiler Flags
|
|
# =============================================================================
|
|
|
|
CFLAGS += -g # always include debug info in the ELF
|
|
ifeq ($(DEBUG),1)
|
|
CFLAGS += -Og
|
|
else
|
|
CFLAGS += -Os -DNDEBUG
|
|
endif
|
|
|
|
# Set default values for optional variables
|
|
MICROPY_HW_SDRAM_AVAIL ?= 0
|
|
MICROPY_HW_SDRAM_SIZE ?= 0
|
|
MICROPY_PY_MACHINE_SDCARD ?= 0
|
|
|
|
# Configure default compiler flags
|
|
CFLAGS += \
|
|
$(INC) \
|
|
-D__START=main \
|
|
-D__STARTUP_CLEAR_BSS \
|
|
-D__STARTUP_INITIALIZE_RAMFUNCTION \
|
|
-DBOARD_$(BOARD) \
|
|
-DBOARD_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE) \
|
|
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX \
|
|
-DCLOCK_CONFIG_H='<boards/$(MCU_SERIES)_clock_config.h>' \
|
|
-DCPU_$(MCU_SERIES) \
|
|
-DCPU_$(MCU_VARIANT) \
|
|
-DCPU_HEADER_H='<$(MCU_SERIES).h>' \
|
|
-DFSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1 \
|
|
-DI2C_RETRY_TIMES=1000000 \
|
|
-DMICROPY_HW_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE) \
|
|
-DMICROPY_HW_SDRAM_AVAIL=$(MICROPY_HW_SDRAM_AVAIL) \
|
|
-DMICROPY_HW_SDRAM_SIZE=$(MICROPY_HW_SDRAM_SIZE) \
|
|
-DMICROPY_PY_MACHINE_SDCARD=$(MICROPY_PY_MACHINE_SDCARD) \
|
|
-DSPI_RETRY_TIMES=1000000 \
|
|
-DUART_RETRY_TIMES=1000000 \
|
|
-DXIP_BOOT_HEADER_ENABLE=1 \
|
|
-DXIP_EXTERNAL_FLASH=1 \
|
|
-fdata-sections \
|
|
-ffunction-sections \
|
|
-mcpu=cortex-m7 \
|
|
-mthumb \
|
|
-mtune=cortex-m7 \
|
|
-nostdlib \
|
|
-std=c99 \
|
|
-Wall \
|
|
-Wdouble-promotion \
|
|
-Werror \
|
|
-Wfloat-conversion \
|
|
-Wno-error=unused-parameter
|
|
|
|
# Configure respective board flash type
|
|
ifeq ($(MICROPY_HW_FLASH_TYPE),$(filter $(MICROPY_HW_FLASH_TYPE),qspi_nor_flash qspi_hyper_flash))
|
|
# Add hal/flexspi_nor_flash.h or hal/flexspi_hyper_flash.h respectively
|
|
CFLAGS += -DBOARD_FLASH_OPS_HEADER_H=\"hal/flexspi_$(subst qspi_,,$(MICROPY_HW_FLASH_TYPE)).h\"
|
|
#
|
|
# Add custom (board specific) or default configuration
|
|
ifeq ($(MICROPY_HW_BOARD_FLASH_FILES),1)
|
|
CFLAGS += -DBOARD_FLASH_CONFIG_HEADER_H=\"$(BOARD)_flexspi_flash_config.h\"
|
|
else
|
|
CFLAGS += -DBOARD_FLASH_CONFIG_HEADER_H=\"hal/flexspi_flash_config.h\"
|
|
endif
|
|
else
|
|
$(error Error: Unknown board flash type $(MICROPY_HW_FLASH_TYPE))
|
|
endif
|
|
|
|
# Configure floating point support
|
|
ifeq ($(MICROPY_FLOAT_IMPL),single)
|
|
CFLAGS += \
|
|
-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT \
|
|
-fsingle-precision-constant \
|
|
-mfloat-abi=softfp \
|
|
-mfpu=fpv5-sp-d16
|
|
else ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
CFLAGS += \
|
|
-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_DOUBLE \
|
|
-mfloat-abi=hard \
|
|
-mfpu=fpv5-d16
|
|
else ifeq ($(MICROPY_FLOAT_IMPL),none)
|
|
CFLAGS += \
|
|
-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_NONE
|
|
else
|
|
$(error Error: Unknown floating point implementation $(MICROPY_FLOAT_IMPL))
|
|
endif
|
|
|
|
|
|
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
|
|
ifeq ($(MICROPY_PY_LWIP),1)
|
|
CFLAGS += \
|
|
-DFSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE=1 \
|
|
-DMBEDTLS_CONFIG_FILE='"mbedtls/mbedtls_config.h"'
|
|
endif
|
|
|
|
CFLAGS += $(CFLAGS_MOD) $(CFLAGS_EXTRA)
|
|
|
|
# =============================================================================
|
|
# Linker Flags
|
|
# =============================================================================
|
|
|
|
LDFLAGS = \
|
|
--cref \
|
|
--gc-sections \
|
|
--print-memory-usage \
|
|
-Map=$@.map
|
|
|
|
# LDDEFINES are used for link time adaptation of linker scripts, utilizing
|
|
# the C preprocessor. Therefore keep LDDEFINES separated from LDFLAGS!
|
|
|
|
LDDEFINES = \
|
|
-DMICROPY_HW_FLASH_TYPE=$(MICROPY_HW_FLASH_TYPE) \
|
|
-DMICROPY_HW_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE)
|
|
|
|
ifdef MICROPY_HW_FLASH_RESERVED
|
|
LDDEFINES += -DMICROPY_HW_FLASH_RESERVED=$(MICROPY_HW_FLASH_RESERVED)
|
|
endif
|
|
|
|
ifdef MICROPY_HW_SDRAM_AVAIL
|
|
LDDEFINES += \
|
|
-DMICROPY_HW_SDRAM_AVAIL=$(MICROPY_HW_SDRAM_AVAIL) \
|
|
-DMICROPY_HW_SDRAM_SIZE=$(MICROPY_HW_SDRAM_SIZE)
|
|
endif
|
|
|
|
# =============================================================================
|
|
# Library and Object files
|
|
# =============================================================================
|
|
|
|
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
|
|
LIBM_O = $(addprefix $(BUILD)/, $(LIBM_SRC_C:.c=.o))
|
|
|
|
# Too many warnings in libm_dbl, disable for now.
|
|
ifeq ($(MICROPY_FLOAT_IMPL),double)
|
|
$(LIBM_O): CFLAGS := $(filter-out -Wdouble-promotion -Wfloat-conversion, $(CFLAGS))
|
|
endif
|
|
|
|
|
|
OBJ += $(PY_O)
|
|
OBJ += $(LIBM_O)
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_SS:.S=.o))
|
|
OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
|
|
OBJ += $(BUILD)/pins_gen.o
|
|
|
|
# Workaround for bug in older gcc, warning on "static usbd_device_t _usbd_dev = { 0 };"
|
|
$(BUILD)/lib/tinyusb/src/device/usbd.o: CFLAGS += -Wno-missing-braces
|
|
|
|
# =============================================================================
|
|
# Build targets
|
|
# =============================================================================
|
|
|
|
all: $(BUILD)/firmware.hex $(BUILD)/firmware.bin
|
|
|
|
# Process linker scripts with C preprocessor to exchange LDDEFINES and
|
|
# aggregate output of preprocessor in a single linker script `link.ld`
|
|
$(BUILD)/firmware.elf: $(OBJ)
|
|
$(ECHO) "PREPROCESS LINK $@"
|
|
$(Q)$(CC) -E -x c $(LDDEFINES) $(LD_FILES) | grep -v '^#' > $(BUILD)/link.ld
|
|
$(ECHO) "LINK $@"
|
|
$(Q)$(LD) -T$(BUILD)/link.ld $(LDFLAGS) -o $@ $^ $(LIBS)
|
|
$(Q)$(SIZE) $@
|
|
|
|
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
|
|
$(Q)$(OBJCOPY) -O binary $^ $@
|
|
|
|
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
|
|
$(Q)$(OBJCOPY) -O ihex -R .eeprom $< $@
|
|
|
|
# Making OBJ use an order-only dependency on the generated pins.h file
|
|
# has the side effect of making the pins.h file before we actually compile
|
|
# any of the objects. The normal dependency generation will deal with the
|
|
# case when pins.h is modified. But when it doesn't exist, we don't know
|
|
# which source files might need it.
|
|
$(OBJ): | $(GEN_PINS_HDR) $(GEN_FLEXRAM_CONFIG_SRC)
|
|
|
|
# With conditional pins, we may need to regenerate qstrdefs.h when config
|
|
# options change.
|
|
$(HEADER_BUILD)/qstrdefs.generated.h: $(BOARD_DIR)/mpconfigboard.h
|
|
|
|
$(GEN_FLEXRAM_CONFIG_SRC):
|
|
$(ECHO) "Create $@"
|
|
$(Q)$(PYTHON) $(MAKE_FLEXRAM_LD) -d $(TOP)/$(MCU_DIR)/$(MCU_SERIES).h \
|
|
-f $(TOP)/$(MCU_DIR)/$(MCU_SERIES)_features.h -l boards/$(MCU_SERIES).ld -c $(MCU_SERIES) > $(GEN_FLEXRAM_CONFIG_SRC)
|
|
|
|
|
|
# Use a pattern rule here so that make will only call make-pins.py once to make
|
|
# both pins_gen.c and pins.h
|
|
$(BUILD)/%_gen.c $(HEADER_BUILD)/%.h: $(BOARD_PINS) $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
|
|
$(ECHO) "Create $@"
|
|
$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE)\
|
|
--iomux $(abspath $(TOP)/$(MCU_DIR)/drivers/fsl_iomuxc.h) \
|
|
--prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) > $(GEN_PINS_SRC)
|
|
|
|
$(BUILD)/pins_gen.o: $(BUILD)/pins_gen.c
|
|
$(call compile_c)
|
|
|
|
include $(TOP)/py/mkrules.mk
|