a580f0f1c4
I noticed that this code was referring to samd-specific functionality, and isn't enabled except in one samd board (pewpew10). Move it. There is incomplte support for _pew in mimxrt10xx which then caused build errors; adding a #if guard to check for _pew being enabled fixes it. The _pew module is not likely to be important on mimxrt but I'll leave the choice to remove it to someone else. |
||
|---|---|---|
| .. | ||
| asf4@039b5f3bbc | ||
| asf4_conf | ||
| bindings/samd | ||
| boards | ||
| common-hal | ||
| freetouch@b6859a349e | ||
| modules | ||
| peripherals@6b531fc923 | ||
| supervisor | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| audio_dma.c | ||
| audio_dma.h | ||
| background.c | ||
| background.h | ||
| eic_handler.c | ||
| eic_handler.h | ||
| fatfs_port.c | ||
| ld_defines.c | ||
| Makefile | ||
| mpconfigport.h | ||
| mpconfigport.mk | ||
| mphalport.c | ||
| mphalport.h | ||
| qstrdefsport.h | ||
| README.rst | ||
| reset.c | ||
| reset.h | ||
| samd_peripherals_config.h | ||
| timer_handler.c | ||
| timer_handler.h | ||
SAMD21 and SAMD51
==================
This port supports many development boards that utilize SAMD21 and SAMD51 chips. See
https://circuitpython.org/downloads for all supported boards.
Building
--------
For build instructions see this guide: https://learn.adafruit.com/building-circuitpython/
Debugging
---------
For debugging instructions see this guide: https://learn.adafruit.com/debugging-the-samd21-with-gdb
Port Specific modules
---------------------
.. toctree::
../../shared-bindings/samd/index