dd38d90724
This compiles and links, but hasn't been tested on a board yet and even if it was run, it doesn't currently do anything.
403 lines
20 KiB
C
403 lines
20 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_cryp.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.0
|
|
* @date 18-February-2014
|
|
* @brief Header file of CRYP HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_CRYP_H
|
|
#define __STM32F4xx_HAL_CRYP_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup CRYP
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief CRYP Configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
|
|
This parameter can be a value of @ref CRYP_Data_Type */
|
|
|
|
uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length.
|
|
This parameter can be a value of @ref CRYP_Key_Size */
|
|
|
|
uint8_t* pKey; /*!< The key used for encryption/decryption */
|
|
|
|
uint8_t* pInitVect; /*!< The initialization vector used also as initialization
|
|
counter in CTR mode */
|
|
|
|
uint8_t IVSize; /*!< The size of initialization vector.
|
|
This parameter (called nonce size in CCM) is used only
|
|
in AES-128/192/256 encryption/decryption CCM mode */
|
|
|
|
uint8_t TagSize; /*!< The size of returned authentication TAG.
|
|
This parameter is used only in AES-128/192/256
|
|
encryption/decryption CCM mode */
|
|
|
|
uint8_t* Header; /*!< The header used in GCM and CCM modes */
|
|
|
|
uint16_t HeaderSize; /*!< The size of header buffer in bytes */
|
|
|
|
uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
|
|
This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
|
|
|
|
}CRYP_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL CRYP State structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */
|
|
HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */
|
|
HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */
|
|
HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */
|
|
HAL_CRYP_STATE_ERROR = 0x04 /*!< CRYP error state */
|
|
|
|
}HAL_CRYP_STATETypeDef;
|
|
|
|
/**
|
|
* @brief HAL CRYP phase structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */
|
|
HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */
|
|
HAL_CRYP_PHASE_FINAL = 0x03 /*!< CRYP peripheral is in final phase
|
|
This is relevant only with CCM and GCM modes */
|
|
}HAL_PhaseTypeDef;
|
|
|
|
/**
|
|
* @brief CRYP handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
CRYP_InitTypeDef Init; /*!< CRYP required parameters */
|
|
|
|
uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
|
|
|
|
uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
|
|
|
|
__IO uint16_t CrypInCount; /*!< Counter of inputed data */
|
|
|
|
__IO uint16_t CrypOutCount; /*!< Counter of outputed data */
|
|
|
|
HAL_StatusTypeDef Status; /*!< CRYP peripheral status */
|
|
|
|
HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */
|
|
|
|
DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
|
|
|
|
HAL_LockTypeDef Lock; /*!< CRYP locking object */
|
|
|
|
__IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
|
|
|
|
}CRYP_HandleTypeDef;
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup CRYP_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup CRYP_Key_Size
|
|
* @{
|
|
*/
|
|
#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000)
|
|
#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0
|
|
#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1
|
|
|
|
#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KEYSIZE_128B) || \
|
|
((KEYSIZE) == CRYP_KEYSIZE_192B) || \
|
|
((KEYSIZE) == CRYP_KEYSIZE_256B))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CRYP_Data_Type
|
|
* @{
|
|
*/
|
|
#define CRYP_DATATYPE_32B ((uint32_t)0x00000000)
|
|
#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0
|
|
#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1
|
|
#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE
|
|
|
|
#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \
|
|
((DATATYPE) == CRYP_DATATYPE_16B) || \
|
|
((DATATYPE) == CRYP_DATATYPE_8B) || \
|
|
((DATATYPE) == CRYP_DATATYPE_1B))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CRYP_AlgoModeDirection
|
|
* @{
|
|
*/
|
|
#define CRYP_CR_ALGOMODE_DIRECTION ((uint32_t)0x0008003C)
|
|
#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT ((uint32_t)0x00000000)
|
|
#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT ((uint32_t)0x00000004)
|
|
#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT ((uint32_t)0x00000008)
|
|
#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT ((uint32_t)0x0000000C)
|
|
#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT ((uint32_t)0x00000010)
|
|
#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT ((uint32_t)0x00000014)
|
|
#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT ((uint32_t)0x00000018)
|
|
#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT ((uint32_t)0x0000001C)
|
|
#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000020)
|
|
#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT ((uint32_t)0x00000024)
|
|
#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT ((uint32_t)0x00000028)
|
|
#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT ((uint32_t)0x0000002C)
|
|
#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT ((uint32_t)0x00000030)
|
|
#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)0x00000034)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup CRYP_Interrupt
|
|
* @{
|
|
*/
|
|
#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */
|
|
#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup CRYP_Flags
|
|
* @{
|
|
*/
|
|
|
|
#define CRYP_FLAG_BUSY ((uint32_t)0x00000010) /*!< The CRYP core is currently
|
|
processing a block of data
|
|
or a key preparation (for
|
|
AES decryption). */
|
|
#define CRYP_FLAG_IFEM ((uint32_t)0x00000001) /*!< Input FIFO is empty */
|
|
#define CRYP_FLAG_IFNF ((uint32_t)0x00000002) /*!< Input FIFO is not Full */
|
|
#define CRYP_FLAG_OFNE ((uint32_t)0x00000004) /*!< Output FIFO is not empty */
|
|
#define CRYP_FLAG_OFFU ((uint32_t)0x00000008) /*!< Output FIFO is Full */
|
|
#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002) /*!< Output FIFO service raw
|
|
interrupt status */
|
|
#define CRYP_FLAG_INRIS ((uint32_t)0x01000001) /*!< Input FIFO service raw
|
|
interrupt status */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Enable/Disable the CRYP peripheral.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
#define __HAL_CRYP_ENABLE() (CRYP->CR |= CRYP_CR_CRYPEN)
|
|
#define __HAL_CRYP_DISABLE() (CRYP->CR &= ~CRYP_CR_CRYPEN)
|
|
|
|
/**
|
|
* @brief Flush the data FIFO.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
#define __HAL_CRYP_FIFO_FLUSH() (CRYP->CR |= CRYP_CR_FFLUSH)
|
|
|
|
/**
|
|
* @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC,...
|
|
* @param MODE: The algorithm mode.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_CRYP_SET_MODE(MODE) CRYP->CR |= (uint32_t)(MODE)
|
|
|
|
|
|
/** @brief Check whether the specified CRYP flag is set or not.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
|
|
* or a key preparation (for AES decryption).
|
|
* @arg CRYP_FLAG_IFEM: Input FIFO is empty
|
|
* @arg CRYP_FLAG_IFNF: Input FIFO is not full
|
|
* @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
|
|
* @arg CRYP_FLAG_OFNE: Output FIFO is not empty
|
|
* @arg CRYP_FLAG_OFFU: Output FIFO is full
|
|
* @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
#define CRYP_FLAG_MASK ((uint32_t)0x0000001F)
|
|
#define __HAL_CRYP_GET_FLAG(__FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?(((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
|
|
(((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
|
|
|
|
/** @brief Check whether the specified CRYP interrupt is set or not.
|
|
* @param __INTERRUPT__: specifies the interrupt to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
|
|
* @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
|
|
* @retval The new state of __INTERRUPT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((CRYP->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Enable the CRYP interrupt.
|
|
* @param __INTERRUPT__: CRYP Interrupt.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the CRYP interrupt.
|
|
* @param __INTERRUPT__: CRYP interrupt.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) &= ~(__INTERRUPT__))
|
|
|
|
/* Include CRYP HAL Extension module */
|
|
#include "stm32f4xx_hal_cryp_ex.h"
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/* Initialization/de-initialization functions **********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
|
|
HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
|
|
|
|
/* AES encryption/decryption using polling ***********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
|
|
|
|
/* AES encryption/decryption using interrupt *********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
|
|
/* AES encryption/decryption using DMA ***************************************/
|
|
HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
|
|
/* DES encryption/decryption using polling ***********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
|
|
/* DES encryption/decryption using interrupt *********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
|
|
/* DES encryption/decryption using DMA ***************************************/
|
|
HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
|
|
/* TDES encryption/decryption using polling **********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
|
|
|
|
/* TDES encryption/decryption using interrupt ********************************/
|
|
HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
|
|
/* TDES encryption/decryption using DMA **************************************/
|
|
HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
|
|
HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
|
|
|
|
/* Processing functions ********************************************************/
|
|
void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
|
|
|
|
/* Peripheral State functions **************************************************/
|
|
HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
|
|
|
|
/* MSP functions *************************************************************/
|
|
void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
|
|
void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
|
|
|
|
/* CallBack functions ********************************************************/
|
|
void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
|
|
void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
|
|
void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
|
|
|
|
#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F4xx_HAL_CRYP_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|