182 lines
6.7 KiB
C
182 lines
6.7 KiB
C
#include "asf/common2/services/delay/delay.h"
|
|
#include "asf/sam0/drivers/port/port.h"
|
|
|
|
#include "mphalport.h"
|
|
|
|
#include "common-hal/microcontroller/Pin.h"
|
|
#include "shared-bindings/bitbangio/SPI.h"
|
|
#include "shared-bindings/busio/SPI.h"
|
|
#include "shared-bindings/digitalio/DigitalInOut.h"
|
|
#include "shared-bindings/neopixel_write/__init__.h"
|
|
#include "shared-module/bitbangio/types.h"
|
|
#include "rgb_led_status.h"
|
|
#include "samd21_pins.h"
|
|
|
|
#ifdef MICROPY_HW_NEOPIXEL
|
|
uint8_t rgb_status_brightness = 63;
|
|
static uint8_t status_neopixel_color[3];
|
|
static digitalio_digitalinout_obj_t status_neopixel;
|
|
#endif
|
|
|
|
|
|
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
|
|
uint8_t rgb_status_brightness = 255;
|
|
static uint8_t status_apa102_color[12] = {0, 0, 0, 0, 0xff, 0, 0, 0};
|
|
#ifdef CIRCUITPY_BITBANG_APA102
|
|
static bitbangio_spi_obj_t status_apa102;
|
|
#else
|
|
busio_spi_obj_t status_apa102;
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
|
|
static uint32_t current_status_color = 0;
|
|
#endif
|
|
|
|
|
|
void rgb_led_status_init() {
|
|
#ifdef MICROPY_HW_NEOPIXEL
|
|
common_hal_digitalio_digitalinout_construct(&status_neopixel, MICROPY_HW_NEOPIXEL);
|
|
// Pretend we aren't using the pins. digitalio.DigitalInOut
|
|
// will mark them as used.
|
|
neopixel_in_use = false;
|
|
common_hal_digitalio_digitalinout_switch_to_output(&status_neopixel, false, DRIVE_MODE_PUSH_PULL);
|
|
#endif
|
|
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
|
|
#ifdef CIRCUITPY_BITBANG_APA102
|
|
shared_module_bitbangio_spi_construct(&status_apa102,
|
|
MICROPY_HW_APA102_SCK,
|
|
MICROPY_HW_APA102_MOSI,
|
|
mp_const_none);
|
|
#else
|
|
if (status_apa102.current_baudrate > 0) {
|
|
// Don't use spi_deinit because that leads to infinite
|
|
// recursion because reset_pin may call
|
|
// rgb_led_status_init.
|
|
spi_disable(&status_apa102.spi_master_instance);
|
|
}
|
|
common_hal_busio_spi_construct(&status_apa102,
|
|
MICROPY_HW_APA102_SCK,
|
|
MICROPY_HW_APA102_MOSI,
|
|
mp_const_none);
|
|
#endif
|
|
// Pretend we aren't using the pins. bitbangio.SPI will
|
|
// mark them as used.
|
|
apa102_mosi_in_use = false;
|
|
apa102_sck_in_use = false;
|
|
#ifdef CIRCUITPY_BITBANG_APA102
|
|
shared_module_bitbangio_spi_try_lock(&status_apa102);
|
|
shared_module_bitbangio_spi_configure(&status_apa102, 100000, 0, 1, 8);
|
|
#else
|
|
common_hal_busio_spi_try_lock(&status_apa102);
|
|
common_hal_busio_spi_configure(&status_apa102, 100000, 0, 1, 8);
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
|
|
// Force a write of the current status color.
|
|
uint32_t rgb = current_status_color;
|
|
current_status_color = 0;
|
|
new_status_color(rgb);
|
|
#endif
|
|
}
|
|
|
|
void reset_status_led() {
|
|
#ifdef MICROPY_HW_NEOPIXEL
|
|
reset_pin(MICROPY_HW_NEOPIXEL->pin);
|
|
#endif
|
|
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
|
|
reset_pin(MICROPY_HW_APA102_MOSI->pin);
|
|
reset_pin(MICROPY_HW_APA102_SCK->pin);
|
|
#endif
|
|
}
|
|
|
|
void new_status_color(uint32_t rgb) {
|
|
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
|
|
if (current_status_color == rgb) {
|
|
return;
|
|
}
|
|
uint32_t rgb_adjusted = color_brightness(rgb, rgb_status_brightness);
|
|
current_status_color = rgb_adjusted;
|
|
#endif
|
|
|
|
#ifdef MICROPY_HW_NEOPIXEL
|
|
if (neopixel_in_use) {
|
|
return;
|
|
}
|
|
status_neopixel_color[0] = (rgb_adjusted >> 8) & 0xff;
|
|
status_neopixel_color[1] = (rgb_adjusted >> 16) & 0xff;
|
|
status_neopixel_color[2] = rgb_adjusted & 0xff;
|
|
common_hal_neopixel_write(&status_neopixel, status_neopixel_color, 3);
|
|
#endif
|
|
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
|
|
if (apa102_mosi_in_use || apa102_sck_in_use) {
|
|
return;
|
|
}
|
|
status_apa102_color[5] = rgb_adjusted & 0xff;
|
|
status_apa102_color[6] = (rgb_adjusted >> 8) & 0xff;
|
|
status_apa102_color[7] = (rgb_adjusted >> 16) & 0xff;
|
|
|
|
#ifdef CIRCUITPY_BITBANG_APA102
|
|
shared_module_bitbangio_spi_write(&status_apa102, status_apa102_color, 8);
|
|
#else
|
|
common_hal_busio_spi_write(&status_apa102, status_apa102_color, 8);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void temp_status_color(uint32_t rgb) {
|
|
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
|
|
uint32_t rgb_adjusted = rgb;
|
|
rgb_adjusted = color_brightness(rgb, rgb_status_brightness);
|
|
#endif
|
|
#ifdef MICROPY_HW_NEOPIXEL
|
|
if (neopixel_in_use) {
|
|
return;
|
|
}
|
|
uint8_t colors[3] = {(rgb_adjusted >> 8) & 0xff, (rgb_adjusted >> 16) & 0xff, rgb_adjusted & 0xff};
|
|
common_hal_neopixel_write(&status_neopixel, colors, 3);
|
|
#endif
|
|
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
|
|
if (apa102_mosi_in_use || apa102_sck_in_use) {
|
|
return;
|
|
}
|
|
uint8_t colors[12] = {0, 0, 0, 0, 0xff, rgb_adjusted & 0xff, (rgb_adjusted >> 8) & 0xff, (rgb_adjusted >> 16) & 0xff, 0x0, 0x0, 0x0, 0x0};
|
|
#ifdef CIRCUITPY_BITBANG_APA102
|
|
shared_module_bitbangio_spi_write(&status_apa102, colors, 12);
|
|
#else
|
|
common_hal_busio_spi_write(&status_apa102, colors, 12);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
void clear_temp_status() {
|
|
#ifdef MICROPY_HW_NEOPIXEL
|
|
common_hal_neopixel_write(&status_neopixel, status_neopixel_color, 3);
|
|
#endif
|
|
#if defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK)
|
|
#ifdef CIRCUITPY_BITBANG_APA102
|
|
shared_module_bitbangio_spi_write(&status_apa102, status_apa102_color, 8);
|
|
#else
|
|
common_hal_busio_spi_write(&status_apa102, status_apa102_color, 8);
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
uint32_t color_brightness(uint32_t color, uint8_t brightness) {
|
|
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
|
|
uint32_t result = ((color & 0xff0000) * brightness / 255) & 0xff0000;
|
|
result += ((color & 0xff00) * brightness / 255) & 0xff00;
|
|
result += ((color & 0xff) * brightness / 255) & 0xff;
|
|
return result;
|
|
#else
|
|
return color;
|
|
#endif
|
|
}
|
|
|
|
void set_rgb_status_brightness(uint8_t level){
|
|
#if defined(MICROPY_HW_NEOPIXEL) || (defined(MICROPY_HW_APA102_MOSI) && defined(MICROPY_HW_APA102_SCK))
|
|
rgb_status_brightness = level;
|
|
#endif
|
|
}
|