864f671744
In order to be able to support GPIO1 port on nrf52840 the port has been removed from the Pin object. All pins on port1 will now be incrementally on top of the pin numbers for gpio0. Hence, Pin 1.00 will become P32, and Pin 1.15 will become P47. The modification is done to address the new gpio HAL interface in nrfx, which resolves the port to be configured base on a multiple of 32. The patch also affects the existing devices which does not have a second GPIO port in the way that the port indication A and B is removed from Pin generation. This means that the port which was earlier addressed as PA0 is now P0, and PA31 is P31. Also, this patch removes the gpio member which earlier pointed to the perihperal GPIO base address. This is not needed anymore, hence removed.
71 lines
2.7 KiB
C
71 lines
2.7 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2017 Glenn Ruben Bakke
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#define PCA10028
|
|
|
|
#define MICROPY_HW_BOARD_NAME "micro:bit"
|
|
#define MICROPY_HW_MCU_NAME "NRF51822"
|
|
#define MICROPY_PY_SYS_PLATFORM "nrf51"
|
|
|
|
#define MICROPY_PY_MACHINE_UART (1)
|
|
#define MICROPY_PY_MUSIC (1)
|
|
#define MICROPY_PY_MACHINE_SOFT_PWM (1)
|
|
#define MICROPY_PY_MACHINE_HW_SPI (1)
|
|
#define MICROPY_PY_MACHINE_TIMER (1)
|
|
#define MICROPY_PY_MACHINE_RTCOUNTER (1)
|
|
#define MICROPY_PY_MACHINE_I2C (1)
|
|
#define MICROPY_PY_MACHINE_ADC (1)
|
|
#define MICROPY_PY_MACHINE_TEMP (1)
|
|
#define MICROPY_PY_HW_RNG (1)
|
|
|
|
#define MICROPY_HW_HAS_LED (0)
|
|
#define MICROPY_HW_HAS_SWITCH (0)
|
|
#define MICROPY_HW_HAS_FLASH (0)
|
|
#define MICROPY_HW_HAS_SDCARD (0)
|
|
#define MICROPY_HW_HAS_MMA7660 (0)
|
|
#define MICROPY_HW_HAS_LIS3DSH (0)
|
|
#define MICROPY_HW_HAS_LCD (0)
|
|
#define MICROPY_HW_ENABLE_RNG (0)
|
|
#define MICROPY_HW_ENABLE_RTC (0)
|
|
#define MICROPY_HW_ENABLE_TIMER (0)
|
|
#define MICROPY_HW_ENABLE_SERVO (0)
|
|
#define MICROPY_HW_ENABLE_DAC (0)
|
|
#define MICROPY_HW_ENABLE_CAN (0)
|
|
|
|
// UART config
|
|
#define MICROPY_HW_UART1_RX (pin_P25)
|
|
#define MICROPY_HW_UART1_TX (pin_P24)
|
|
#define MICROPY_HW_UART1_HWFC (0)
|
|
|
|
// SPI0 config
|
|
#define MICROPY_HW_SPI0_NAME "SPI0"
|
|
#define MICROPY_HW_SPI0_SCK (pin_P23)
|
|
#define MICROPY_HW_SPI0_MOSI (pin_P21)
|
|
#define MICROPY_HW_SPI0_MISO (pin_P22)
|
|
|
|
// micro:bit music pin
|
|
#define MICROPY_HW_MUSIC_PIN (pin_P3)
|