893f75546c
When installing WS firmware, the very first GET_STATE can take several seconds to respond (especially with the larger binaries like BLE_stack_full). Allows stm.rfcore_sys_hci to take an optional timeout, defaulting to SYS_ACK_TIMEOUT_MS (which is 250ms). Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
699 lines
23 KiB
C
699 lines
23 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Damien P. George
|
|
* Copyright (c) 2020 Jim Mussared
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
|
|
#include "py/mperrno.h"
|
|
#include "py/mphal.h"
|
|
#include "py/runtime.h"
|
|
#include "rtc.h"
|
|
#include "rfcore.h"
|
|
|
|
#if defined(STM32WB)
|
|
|
|
#include "stm32wbxx_ll_ipcc.h"
|
|
|
|
#define DEBUG_printf(...) // printf("rfcore: " __VA_ARGS__)
|
|
|
|
// Define to 1 to print traces of HCI packets
|
|
#define HCI_TRACE (0)
|
|
|
|
#define IPCC_CH_BLE (LL_IPCC_CHANNEL_1) // BLE HCI command and response
|
|
#define IPCC_CH_SYS (LL_IPCC_CHANNEL_2) // system HCI command and response
|
|
#define IPCC_CH_MM (LL_IPCC_CHANNEL_4) // release buffer
|
|
#define IPCC_CH_HCI_ACL (LL_IPCC_CHANNEL_6) // HCI ACL outgoing data
|
|
|
|
#define OGF_CTLR_BASEBAND (0x03)
|
|
#define OCF_CB_RESET (0x03)
|
|
#define OCF_CB_SET_EVENT_MASK2 (0x63)
|
|
|
|
#define OGF_VENDOR (0x3f)
|
|
#define OCF_WRITE_CONFIG (0x0c)
|
|
#define OCF_SET_TX_POWER (0x0f)
|
|
#define OCF_BLE_INIT (0x66)
|
|
|
|
#define HCI_OPCODE(ogf, ocf) ((ogf) << 10 | (ocf))
|
|
|
|
#define HCI_KIND_BT_CMD (0x01) // <kind=1>...?
|
|
#define HCI_KIND_BT_ACL (0x02) // <kind=2><?><?><len LSB><len MSB>
|
|
#define HCI_KIND_BT_EVENT (0x04) // <kind=4><op><len><data...>
|
|
#define HCI_KIND_VENDOR_RESPONSE (0x11)
|
|
#define HCI_KIND_VENDOR_EVENT (0x12)
|
|
|
|
#define HCI_EVENT_COMMAND_COMPLETE (0x0E) // <num packets><opcode 16><status><data...>
|
|
#define HCI_EVENT_COMMAND_STATUS (0x0F) // <status><num_packets><opcode 16>
|
|
|
|
#define SYS_ACK_TIMEOUT_MS (250)
|
|
#define BLE_ACK_TIMEOUT_MS (250)
|
|
|
|
// AN5185
|
|
#define MAGIC_FUS_ACTIVE 0xA94656B9
|
|
// AN5289
|
|
#define MAGIC_IPCC_MEM_INCORRECT 0x3DE96F61
|
|
|
|
typedef struct _tl_list_node_t {
|
|
volatile struct _tl_list_node_t *next;
|
|
volatile struct _tl_list_node_t *prev;
|
|
uint8_t body[0];
|
|
} tl_list_node_t;
|
|
|
|
typedef struct _parse_hci_info_t {
|
|
int (*cb_fun)(void *, const uint8_t *, size_t);
|
|
void *cb_env;
|
|
bool was_hci_reset_evt;
|
|
} parse_hci_info_t;
|
|
|
|
// Version
|
|
// [0:3] = Build - 0: Untracked - 15:Released - x: Tracked version
|
|
// [4:7] = branch - 0: Mass Market - x: ...
|
|
// [8:15] = Subversion
|
|
// [16:23] = Version minor
|
|
// [24:31] = Version major
|
|
|
|
// Memory Size
|
|
// [0:7] = Flash (Number of 4k sectors)
|
|
// [8:15] = Reserved (Shall be set to 0 - may be used as flash extension)
|
|
// [16:23] = SRAM2b (Number of 1k sectors)
|
|
// [24:31] = SRAM2a (Number of 1k sectors)
|
|
|
|
typedef union __attribute__((packed)) _ipcc_device_info_table_t {
|
|
struct {
|
|
uint32_t table_state;
|
|
uint8_t reserved0;
|
|
uint8_t last_fus_state;
|
|
uint8_t last_ws_state;
|
|
uint8_t ws_type;
|
|
uint32_t safeboot_version;
|
|
uint32_t fus_version;
|
|
uint32_t fus_memorysize;
|
|
uint32_t ws_version;
|
|
uint32_t ws_memorysize;
|
|
uint32_t ws_ble_info;
|
|
uint32_t ws_thread_info;
|
|
uint32_t reserved1;
|
|
uint64_t uid64;
|
|
uint16_t device_id;
|
|
uint16_t pad;
|
|
} fus;
|
|
struct {
|
|
uint32_t safeboot_version;
|
|
uint32_t fus_version;
|
|
uint32_t fus_memorysize;
|
|
uint32_t fus_info;
|
|
uint32_t fw_version;
|
|
uint32_t fw_memorysize;
|
|
uint32_t fw_infostack;
|
|
uint32_t fw_reserved;
|
|
} ws;
|
|
} ipcc_device_info_table_t;
|
|
|
|
typedef struct __attribute__((packed)) _ipcc_ble_table_t {
|
|
uint8_t *pcmd_buffer;
|
|
uint8_t *pcs_buffer;
|
|
tl_list_node_t *pevt_queue;
|
|
uint8_t *phci_acl_data_buffer;
|
|
} ipcc_ble_table_t;
|
|
|
|
// msg
|
|
// [0:7] = cmd/evt
|
|
// [8:31] = Reserved
|
|
typedef struct __attribute__((packed)) _ipcc_sys_table_t {
|
|
uint8_t *pcmd_buffer;
|
|
tl_list_node_t *sys_queue;
|
|
} ipcc_sys_table_t;
|
|
|
|
typedef struct __attribute__((packed)) _ipcc_mem_manager_table_t {
|
|
uint8_t *spare_ble_buffer;
|
|
uint8_t *spare_sys_buffer;
|
|
uint8_t *blepool;
|
|
uint32_t blepoolsize;
|
|
tl_list_node_t *pevt_free_buffer_queue;
|
|
uint8_t *traces_evt_pool;
|
|
uint32_t tracespoolsize;
|
|
} ipcc_mem_manager_table_t;
|
|
|
|
typedef struct __attribute__((packed)) _ipcc_ref_table_t {
|
|
ipcc_device_info_table_t *p_device_info_table;
|
|
ipcc_ble_table_t *p_ble_table;
|
|
void *p_thread_table;
|
|
ipcc_sys_table_t *p_sys_table;
|
|
ipcc_mem_manager_table_t *p_mem_manager_table;
|
|
void *p_traces_table;
|
|
void *p_mac_802_15_4_table;
|
|
void *p_zigbee_table;
|
|
void *p_lld_tests_table;
|
|
void *p_lld_ble_table;
|
|
} ipcc_ref_table_t;
|
|
|
|
// The stm32wb55xg.ld script puts .bss.ipcc_mem_* into SRAM2A and .bss_ipcc_membuf_* into SRAM2B.
|
|
// It also leaves 64 bytes at the start of SRAM2A for the ref table.
|
|
|
|
STATIC ipcc_device_info_table_t ipcc_mem_dev_info_tab; // mem1
|
|
STATIC ipcc_ble_table_t ipcc_mem_ble_tab; // mem1
|
|
STATIC ipcc_sys_table_t ipcc_mem_sys_tab; // mem1
|
|
STATIC ipcc_mem_manager_table_t ipcc_mem_memmgr_tab; // mem1
|
|
|
|
STATIC uint8_t ipcc_membuf_sys_cmd_buf[272]; // mem2
|
|
STATIC tl_list_node_t ipcc_mem_sys_queue; // mem1
|
|
|
|
STATIC tl_list_node_t ipcc_mem_memmgr_free_buf_queue; // mem1
|
|
STATIC uint8_t ipcc_membuf_memmgr_ble_spare_evt_buf[272]; // mem2
|
|
STATIC uint8_t ipcc_membuf_memmgr_sys_spare_evt_buf[272]; // mem2
|
|
STATIC uint8_t ipcc_membuf_memmgr_evt_pool[6 * 272]; // mem2
|
|
|
|
STATIC uint8_t ipcc_membuf_ble_cmd_buf[272]; // mem2
|
|
STATIC uint8_t ipcc_membuf_ble_cs_buf[272]; // mem2
|
|
STATIC tl_list_node_t ipcc_mem_ble_evt_queue; // mem1
|
|
STATIC uint8_t ipcc_membuf_ble_hci_acl_data_buf[272]; // mem2
|
|
|
|
// Set by the RX IRQ handler on incoming HCI payload.
|
|
STATIC volatile bool had_ble_irq = false;
|
|
|
|
/******************************************************************************/
|
|
// Transport layer linked list
|
|
|
|
STATIC void tl_list_init(volatile tl_list_node_t *n) {
|
|
n->next = n;
|
|
n->prev = n;
|
|
}
|
|
|
|
STATIC volatile tl_list_node_t *tl_list_unlink(volatile tl_list_node_t *n) {
|
|
volatile tl_list_node_t *next = n->next;
|
|
volatile tl_list_node_t *prev = n->prev;
|
|
prev->next = next;
|
|
next->prev = prev;
|
|
return next;
|
|
}
|
|
|
|
STATIC void tl_list_append(volatile tl_list_node_t *head, volatile tl_list_node_t *n) {
|
|
n->next = head;
|
|
n->prev = head->prev;
|
|
head->prev->next = n;
|
|
head->prev = n;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
// IPCC interface
|
|
|
|
STATIC volatile ipcc_ref_table_t *get_buffer_table(void) {
|
|
// The IPCCDBA option bytes must not be changed without
|
|
// making a corresponding change to the linker script.
|
|
return (volatile ipcc_ref_table_t *)(SRAM2A_BASE + LL_FLASH_GetIPCCBufferAddr() * 4);
|
|
}
|
|
|
|
void ipcc_init(uint32_t irq_pri) {
|
|
DEBUG_printf("ipcc_init\n");
|
|
|
|
// Setup buffer table pointers
|
|
volatile ipcc_ref_table_t *tab = get_buffer_table();
|
|
tab->p_device_info_table = &ipcc_mem_dev_info_tab;
|
|
tab->p_ble_table = &ipcc_mem_ble_tab;
|
|
tab->p_sys_table = &ipcc_mem_sys_tab;
|
|
tab->p_mem_manager_table = &ipcc_mem_memmgr_tab;
|
|
|
|
// Start IPCC peripheral
|
|
__HAL_RCC_IPCC_CLK_ENABLE();
|
|
|
|
// Enable receive IRQ on the BLE channel.
|
|
LL_C1_IPCC_EnableIT_RXO(IPCC);
|
|
LL_C1_IPCC_DisableReceiveChannel(IPCC, LL_IPCC_CHANNEL_1 | LL_IPCC_CHANNEL_2 | LL_IPCC_CHANNEL_3 | LL_IPCC_CHANNEL_4 | LL_IPCC_CHANNEL_5 | LL_IPCC_CHANNEL_6);
|
|
LL_C1_IPCC_EnableReceiveChannel(IPCC, IPCC_CH_BLE);
|
|
NVIC_SetPriority(IPCC_C1_RX_IRQn, irq_pri);
|
|
HAL_NVIC_EnableIRQ(IPCC_C1_RX_IRQn);
|
|
|
|
// Device info table will be populated by FUS/WS on CPU2 boot.
|
|
|
|
// Populate system table
|
|
tl_list_init(&ipcc_mem_sys_queue);
|
|
ipcc_mem_sys_tab.pcmd_buffer = ipcc_membuf_sys_cmd_buf;
|
|
ipcc_mem_sys_tab.sys_queue = &ipcc_mem_sys_queue;
|
|
|
|
// Populate memory manager table
|
|
tl_list_init(&ipcc_mem_memmgr_free_buf_queue);
|
|
ipcc_mem_memmgr_tab.spare_ble_buffer = ipcc_membuf_memmgr_ble_spare_evt_buf;
|
|
ipcc_mem_memmgr_tab.spare_sys_buffer = ipcc_membuf_memmgr_sys_spare_evt_buf;
|
|
ipcc_mem_memmgr_tab.blepool = ipcc_membuf_memmgr_evt_pool;
|
|
ipcc_mem_memmgr_tab.blepoolsize = sizeof(ipcc_membuf_memmgr_evt_pool);
|
|
ipcc_mem_memmgr_tab.pevt_free_buffer_queue = &ipcc_mem_memmgr_free_buf_queue;
|
|
ipcc_mem_memmgr_tab.traces_evt_pool = NULL;
|
|
ipcc_mem_memmgr_tab.tracespoolsize = 0;
|
|
|
|
// Populate BLE table
|
|
tl_list_init(&ipcc_mem_ble_evt_queue);
|
|
ipcc_mem_ble_tab.pcmd_buffer = ipcc_membuf_ble_cmd_buf;
|
|
ipcc_mem_ble_tab.pcs_buffer = ipcc_membuf_ble_cs_buf;
|
|
ipcc_mem_ble_tab.pevt_queue = &ipcc_mem_ble_evt_queue;
|
|
ipcc_mem_ble_tab.phci_acl_data_buffer = ipcc_membuf_ble_hci_acl_data_buf;
|
|
}
|
|
|
|
/******************************************************************************/
|
|
// Transport layer HCI interface
|
|
|
|
// The WS firmware doesn't support OCF_CB_SET_EVENT_MASK2, and fails with:
|
|
// v1.8.0.0.4 (and below): HCI_EVENT_COMMAND_COMPLETE with a non-zero status
|
|
// v1.9.0.0.4 (and above): HCI_EVENT_COMMAND_STATUS with a non-zero status
|
|
// In either case we detect the failure response and inject this response
|
|
// instead (which is HCI_EVENT_COMMAND_COMPLETE for OCF_CB_SET_EVENT_MASK2
|
|
// with status=0).
|
|
STATIC const uint8_t set_event_event_mask2_fix_payload[] = { 0x04, 0x0e, 0x04, 0x01, 0x63, 0x0c, 0x00 };
|
|
|
|
STATIC size_t tl_parse_hci_msg(const uint8_t *buf, parse_hci_info_t *parse) {
|
|
const char *info;
|
|
#if HCI_TRACE
|
|
int applied_set_event_event_mask2_fix = 0;
|
|
#endif
|
|
size_t len;
|
|
switch (buf[0]) {
|
|
case HCI_KIND_BT_ACL: {
|
|
info = "HCI_ACL";
|
|
|
|
len = 5 + buf[3] + (buf[4] << 8);
|
|
if (parse != NULL) {
|
|
parse->cb_fun(parse->cb_env, buf, len);
|
|
}
|
|
break;
|
|
}
|
|
case HCI_KIND_BT_EVENT: {
|
|
info = "HCI_EVT";
|
|
|
|
len = 3 + buf[2];
|
|
if (parse != NULL) {
|
|
|
|
if (buf[1] == HCI_EVENT_COMMAND_COMPLETE && len == 7) {
|
|
uint16_t opcode = (buf[5] << 8) | buf[4];
|
|
uint8_t status = buf[6];
|
|
|
|
if (opcode == HCI_OPCODE(OGF_CTLR_BASEBAND, OCF_CB_SET_EVENT_MASK2) && status != 0) {
|
|
// For WS firmware v1.8.0.0.4 and below. Reply with the "everything OK" payload.
|
|
parse->cb_fun(parse->cb_env, set_event_event_mask2_fix_payload, sizeof(set_event_event_mask2_fix_payload));
|
|
#if HCI_TRACE
|
|
applied_set_event_event_mask2_fix = 18;
|
|
#endif
|
|
break; // Don't send the original payload.
|
|
}
|
|
|
|
if (opcode == HCI_OPCODE(OGF_CTLR_BASEBAND, OCF_CB_RESET) && status == 0) {
|
|
// Controller acknowledged reset command.
|
|
// This will trigger setting the MAC address.
|
|
parse->was_hci_reset_evt = true;
|
|
}
|
|
}
|
|
|
|
if (buf[1] == HCI_EVENT_COMMAND_STATUS && len == 7) {
|
|
uint16_t opcode = (buf[6] << 8) | buf[5];
|
|
uint8_t status = buf[3];
|
|
|
|
if (opcode == HCI_OPCODE(OGF_CTLR_BASEBAND, OCF_CB_SET_EVENT_MASK2) && status != 0) {
|
|
// For WS firmware v1.9.0.0.4 and higher. Reply with the "everything OK" payload.
|
|
parse->cb_fun(parse->cb_env, set_event_event_mask2_fix_payload, sizeof(set_event_event_mask2_fix_payload));
|
|
#if HCI_TRACE
|
|
applied_set_event_event_mask2_fix = 19;
|
|
#endif
|
|
break; // Don't send the original payload.
|
|
}
|
|
}
|
|
|
|
parse->cb_fun(parse->cb_env, buf, len);
|
|
}
|
|
break;
|
|
}
|
|
case HCI_KIND_VENDOR_RESPONSE: {
|
|
// assert(buf[1] == 0x0e);
|
|
info = "VEND_RESP";
|
|
len = 3 + buf[2]; // ???
|
|
// uint16_t cmd = buf[4] | buf[5] << 8;
|
|
// uint8_t status = buf[6];
|
|
break;
|
|
}
|
|
case HCI_KIND_VENDOR_EVENT: {
|
|
// assert(buf[1] == 0xff);
|
|
info = "VEND_EVT";
|
|
len = 3 + buf[2]; // ???
|
|
// uint16_t evt = buf[3] | buf[4] << 8;
|
|
break;
|
|
}
|
|
default:
|
|
info = "HCI_UNKNOWN";
|
|
len = 0;
|
|
break;
|
|
}
|
|
|
|
#if HCI_TRACE
|
|
printf("[% 8d] <%s(%02x", mp_hal_ticks_ms(), info, buf[0]);
|
|
for (int i = 1; i < len; ++i) {
|
|
printf(":%02x", buf[i]);
|
|
}
|
|
printf(")");
|
|
if (parse && parse->was_hci_reset_evt) {
|
|
printf(" (reset)");
|
|
}
|
|
if (applied_set_event_event_mask2_fix) {
|
|
printf(" (mask2 fix %d)", applied_set_event_event_mask2_fix);
|
|
}
|
|
printf("\n");
|
|
|
|
#else
|
|
(void)info;
|
|
#endif
|
|
|
|
return len;
|
|
}
|
|
|
|
STATIC void tl_process_msg(volatile tl_list_node_t *head, unsigned int ch, parse_hci_info_t *parse) {
|
|
volatile tl_list_node_t *cur = head->next;
|
|
bool added_to_free_queue = false;
|
|
while (cur != head) {
|
|
tl_parse_hci_msg((uint8_t *)cur->body, parse);
|
|
|
|
volatile tl_list_node_t *next = tl_list_unlink(cur);
|
|
|
|
// If this node is allocated from the memmgr event pool, then place it into the free buffer.
|
|
if ((uint8_t *)cur >= ipcc_membuf_memmgr_evt_pool && (uint8_t *)cur < ipcc_membuf_memmgr_evt_pool + sizeof(ipcc_membuf_memmgr_evt_pool)) {
|
|
// Place memory back in free pool.
|
|
tl_list_append(&ipcc_mem_memmgr_free_buf_queue, cur);
|
|
added_to_free_queue = true;
|
|
}
|
|
|
|
cur = next;
|
|
}
|
|
|
|
if (added_to_free_queue) {
|
|
// Notify change in free pool.
|
|
LL_C1_IPCC_SetFlag_CHx(IPCC, IPCC_CH_MM);
|
|
}
|
|
}
|
|
|
|
STATIC void tl_check_msg(volatile tl_list_node_t *head, unsigned int ch, parse_hci_info_t *parse) {
|
|
if (LL_C2_IPCC_IsActiveFlag_CHx(IPCC, ch)) {
|
|
tl_process_msg(head, ch, parse);
|
|
|
|
// Clear receive channel.
|
|
LL_C1_IPCC_ClearFlag_CHx(IPCC, ch);
|
|
}
|
|
}
|
|
|
|
STATIC void tl_check_msg_ble(volatile tl_list_node_t *head, parse_hci_info_t *parse) {
|
|
if (had_ble_irq) {
|
|
tl_process_msg(head, IPCC_CH_BLE, parse);
|
|
|
|
had_ble_irq = false;
|
|
}
|
|
}
|
|
|
|
STATIC void tl_hci_cmd(uint8_t *cmd, unsigned int ch, uint8_t hdr, uint16_t opcode, const uint8_t *buf, size_t len) {
|
|
tl_list_node_t *n = (tl_list_node_t *)cmd;
|
|
n->next = n;
|
|
n->prev = n;
|
|
cmd[8] = hdr;
|
|
cmd[9] = opcode;
|
|
cmd[10] = opcode >> 8;
|
|
cmd[11] = len;
|
|
memcpy(&cmd[12], buf, len);
|
|
|
|
#if HCI_TRACE
|
|
printf("[% 8d] >HCI(", mp_hal_ticks_ms());
|
|
for (int i = 0; i < len + 4; ++i) {
|
|
printf(":%02x", cmd[i + 8]);
|
|
}
|
|
printf(")\n");
|
|
#endif
|
|
|
|
// Indicate that this channel is ready.
|
|
LL_C1_IPCC_SetFlag_CHx(IPCC, ch);
|
|
}
|
|
|
|
STATIC ssize_t tl_sys_wait_ack(const uint8_t *buf, mp_int_t timeout_ms) {
|
|
uint32_t t0 = mp_hal_ticks_ms();
|
|
|
|
timeout_ms = MAX(SYS_ACK_TIMEOUT_MS, timeout_ms);
|
|
|
|
// C2 will clear this bit to acknowledge the request.
|
|
while (LL_C1_IPCC_IsActiveFlag_CHx(IPCC, IPCC_CH_SYS)) {
|
|
if (mp_hal_ticks_ms() - t0 > timeout_ms) {
|
|
printf("tl_sys_wait_ack: timeout\n");
|
|
return -MP_ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
// C1-to-C2 bit cleared, so process the response (just get the length, do
|
|
// not parse any further).
|
|
return (ssize_t)tl_parse_hci_msg(buf, NULL);
|
|
}
|
|
|
|
STATIC ssize_t tl_sys_hci_cmd_resp(uint16_t opcode, const uint8_t *buf, size_t len, mp_int_t timeout_ms) {
|
|
tl_hci_cmd(ipcc_membuf_sys_cmd_buf, IPCC_CH_SYS, 0x10, opcode, buf, len);
|
|
return tl_sys_wait_ack(ipcc_membuf_sys_cmd_buf, timeout_ms);
|
|
}
|
|
|
|
STATIC int tl_ble_wait_resp(void) {
|
|
uint32_t t0 = mp_hal_ticks_ms();
|
|
while (!had_ble_irq) {
|
|
if (mp_hal_ticks_ms() - t0 > BLE_ACK_TIMEOUT_MS) {
|
|
printf("tl_ble_wait_resp: timeout\n");
|
|
return -MP_ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
// C2 set IPCC flag.
|
|
tl_check_msg_ble(&ipcc_mem_ble_evt_queue, NULL);
|
|
return 0;
|
|
}
|
|
|
|
// Synchronously send a BLE command.
|
|
STATIC void tl_ble_hci_cmd_resp(uint16_t opcode, const uint8_t *buf, size_t len) {
|
|
tl_hci_cmd(ipcc_membuf_ble_cmd_buf, IPCC_CH_BLE, HCI_KIND_BT_CMD, opcode, buf, len);
|
|
tl_ble_wait_resp();
|
|
}
|
|
|
|
/******************************************************************************/
|
|
// RF core interface
|
|
|
|
void rfcore_init(void) {
|
|
DEBUG_printf("rfcore_init\n");
|
|
|
|
// Ensure LSE is running
|
|
rtc_init_finalise();
|
|
|
|
// Select LSE as RF wakeup source
|
|
RCC->CSR = (RCC->CSR & ~RCC_CSR_RFWKPSEL) | 1 << RCC_CSR_RFWKPSEL_Pos;
|
|
|
|
// Initialise IPCC and shared memory structures
|
|
ipcc_init(IRQ_PRI_SDIO);
|
|
|
|
// Boot the second core
|
|
__SEV();
|
|
__WFE();
|
|
PWR->CR4 |= PWR_CR4_C2BOOT;
|
|
}
|
|
|
|
static const struct {
|
|
uint8_t *pBleBufferAddress; // unused
|
|
uint32_t BleBufferSize; // unused
|
|
uint16_t NumAttrRecord;
|
|
uint16_t NumAttrServ;
|
|
uint16_t AttrValueArrSize;
|
|
uint8_t NumOfLinks;
|
|
uint8_t ExtendedPacketLengthEnable;
|
|
uint8_t PrWriteListSize;
|
|
uint8_t MblockCount;
|
|
uint16_t AttMtu;
|
|
uint16_t SlaveSca;
|
|
uint8_t MasterSca;
|
|
uint8_t LsSource; // 0=LSE 1=internal RO
|
|
uint32_t MaxConnEventLength;
|
|
uint16_t HsStartupTime;
|
|
uint8_t ViterbiEnable;
|
|
uint8_t LlOnly; // 0=LL+Host, 1=LL only
|
|
uint8_t HwVersion;
|
|
} ble_init_params = {
|
|
0,
|
|
0,
|
|
0, // NumAttrRecord
|
|
0, // NumAttrServ
|
|
0, // AttrValueArrSize
|
|
1, // NumOfLinks
|
|
1, // ExtendedPacketLengthEnable
|
|
0, // PrWriteListSize
|
|
0x79, // MblockCount
|
|
0, // AttMtu
|
|
0, // SlaveSca
|
|
0, // MasterSca
|
|
1, // LsSource
|
|
0xffffffff, // MaxConnEventLength
|
|
0x148, // HsStartupTime
|
|
0, // ViterbiEnable
|
|
1, // LlOnly
|
|
0, // HwVersion
|
|
};
|
|
|
|
void rfcore_ble_init(void) {
|
|
DEBUG_printf("rfcore_ble_init\n");
|
|
|
|
// Clear any outstanding messages from ipcc_init
|
|
tl_check_msg(&ipcc_mem_sys_queue, IPCC_CH_SYS, NULL);
|
|
tl_check_msg_ble(&ipcc_mem_ble_evt_queue, NULL);
|
|
|
|
// Configure and reset the BLE controller
|
|
tl_sys_hci_cmd_resp(HCI_OPCODE(OGF_VENDOR, OCF_BLE_INIT), (const uint8_t *)&ble_init_params, sizeof(ble_init_params), 0);
|
|
tl_ble_hci_cmd_resp(HCI_OPCODE(0x03, 0x0003), NULL, 0);
|
|
}
|
|
|
|
void rfcore_ble_hci_cmd(size_t len, const uint8_t *src) {
|
|
DEBUG_printf("rfcore_ble_hci_cmd\n");
|
|
|
|
#if HCI_TRACE
|
|
printf("[% 8d] >HCI_CMD(%02x", mp_hal_ticks_ms(), src[0]);
|
|
for (int i = 1; i < len; ++i) {
|
|
printf(":%02x", src[i]);
|
|
}
|
|
printf(")\n");
|
|
#endif
|
|
|
|
tl_list_node_t *n;
|
|
uint32_t ch;
|
|
if (src[0] == HCI_KIND_BT_CMD) {
|
|
n = (tl_list_node_t *)&ipcc_membuf_ble_cmd_buf[0];
|
|
ch = IPCC_CH_BLE;
|
|
} else if (src[0] == HCI_KIND_BT_ACL) {
|
|
n = (tl_list_node_t *)&ipcc_membuf_ble_hci_acl_data_buf[0];
|
|
ch = IPCC_CH_HCI_ACL;
|
|
} else {
|
|
printf("** UNEXPECTED HCI HDR: 0x%02x **\n", src[0]);
|
|
return;
|
|
}
|
|
|
|
n->next = n;
|
|
n->prev = n;
|
|
memcpy(n->body, src, len);
|
|
|
|
// IPCC indicate.
|
|
LL_C1_IPCC_SetFlag_CHx(IPCC, ch);
|
|
}
|
|
|
|
void rfcore_ble_check_msg(int (*cb)(void *, const uint8_t *, size_t), void *env) {
|
|
parse_hci_info_t parse = { cb, env, false };
|
|
tl_check_msg_ble(&ipcc_mem_ble_evt_queue, &parse);
|
|
|
|
// Intercept HCI_Reset events and reconfigure the controller following the reset
|
|
if (parse.was_hci_reset_evt) {
|
|
uint8_t buf[8];
|
|
buf[0] = 0; // config offset
|
|
buf[1] = 6; // config length
|
|
mp_hal_get_mac(MP_HAL_MAC_BDADDR, &buf[2]);
|
|
#define SWAP_UINT8(a, b) { uint8_t temp = a; a = b; b = temp; \
|
|
}
|
|
SWAP_UINT8(buf[2], buf[7]);
|
|
SWAP_UINT8(buf[3], buf[6]);
|
|
SWAP_UINT8(buf[4], buf[5]);
|
|
tl_ble_hci_cmd_resp(HCI_OPCODE(OGF_VENDOR, OCF_WRITE_CONFIG), buf, 8); // set BDADDR
|
|
}
|
|
}
|
|
|
|
// "level" is 0x00-0x1f, ranging from -40 dBm to +6 dBm (not linear).
|
|
void rfcore_ble_set_txpower(uint8_t level) {
|
|
uint8_t buf[2] = { 0x00, level };
|
|
tl_ble_hci_cmd_resp(HCI_OPCODE(OGF_VENDOR, OCF_SET_TX_POWER), buf, 2);
|
|
}
|
|
|
|
// IPCC IRQ Handlers
|
|
void IPCC_C1_TX_IRQHandler(void) {
|
|
IRQ_ENTER(IPCC_C1_TX_IRQn);
|
|
IRQ_EXIT(IPCC_C1_TX_IRQn);
|
|
}
|
|
|
|
void IPCC_C1_RX_IRQHandler(void) {
|
|
IRQ_ENTER(IPCC_C1_RX_IRQn);
|
|
|
|
if (LL_C2_IPCC_IsActiveFlag_CHx(IPCC, IPCC_CH_BLE)) {
|
|
had_ble_irq = true;
|
|
|
|
LL_C1_IPCC_ClearFlag_CHx(IPCC, IPCC_CH_BLE);
|
|
|
|
// Schedule PENDSV to process incoming HCI payload.
|
|
extern void mp_bluetooth_hci_poll_wrapper(uint32_t ticks_ms);
|
|
mp_bluetooth_hci_poll_wrapper(0);
|
|
}
|
|
|
|
IRQ_EXIT(IPCC_C1_RX_IRQn);
|
|
}
|
|
|
|
/******************************************************************************/
|
|
// MicroPython bindings
|
|
|
|
STATIC mp_obj_t rfcore_status(void) {
|
|
return mp_obj_new_int_from_uint(ipcc_mem_dev_info_tab.fus.table_state);
|
|
}
|
|
MP_DEFINE_CONST_FUN_OBJ_0(rfcore_status_obj, rfcore_status);
|
|
|
|
STATIC mp_obj_t get_version_tuple(uint32_t data) {
|
|
mp_obj_t items[] = {
|
|
MP_OBJ_NEW_SMALL_INT(data >> 24), MP_OBJ_NEW_SMALL_INT(data >> 16 & 0xFF), MP_OBJ_NEW_SMALL_INT(data >> 8 & 0xFF), MP_OBJ_NEW_SMALL_INT(data >> 4 & 0xF), MP_OBJ_NEW_SMALL_INT(data & 0xF)
|
|
};
|
|
return mp_obj_new_tuple(5, items);
|
|
}
|
|
|
|
STATIC mp_obj_t rfcore_fw_version(mp_obj_t fw_id_in) {
|
|
if (ipcc_mem_dev_info_tab.fus.table_state == MAGIC_IPCC_MEM_INCORRECT) {
|
|
mp_raise_OSError(MP_EINVAL);
|
|
}
|
|
mp_int_t fw_id = mp_obj_get_int(fw_id_in);
|
|
bool fus_active = ipcc_mem_dev_info_tab.fus.table_state == MAGIC_FUS_ACTIVE;
|
|
uint32_t v;
|
|
if (fw_id == 0) {
|
|
// FUS
|
|
v = fus_active ? ipcc_mem_dev_info_tab.fus.fus_version : ipcc_mem_dev_info_tab.ws.fus_version;
|
|
} else {
|
|
// WS
|
|
v = fus_active ? ipcc_mem_dev_info_tab.fus.ws_version : ipcc_mem_dev_info_tab.ws.fw_version;
|
|
}
|
|
return get_version_tuple(v);
|
|
}
|
|
MP_DEFINE_CONST_FUN_OBJ_1(rfcore_fw_version_obj, rfcore_fw_version);
|
|
|
|
STATIC mp_obj_t rfcore_sys_hci(size_t n_args, const mp_obj_t *args) {
|
|
if (ipcc_mem_dev_info_tab.fus.table_state == MAGIC_IPCC_MEM_INCORRECT) {
|
|
mp_raise_OSError(MP_EINVAL);
|
|
}
|
|
mp_int_t ogf = mp_obj_get_int(args[0]);
|
|
mp_int_t ocf = mp_obj_get_int(args[1]);
|
|
mp_buffer_info_t bufinfo = {0};
|
|
mp_get_buffer_raise(args[2], &bufinfo, MP_BUFFER_READ);
|
|
mp_int_t timeout_ms = 0;
|
|
if (n_args >= 4) {
|
|
timeout_ms = mp_obj_get_int(args[3]);
|
|
}
|
|
ssize_t len = tl_sys_hci_cmd_resp(HCI_OPCODE(ogf, ocf), bufinfo.buf, bufinfo.len, timeout_ms);
|
|
if (len < 0) {
|
|
mp_raise_OSError(-len);
|
|
}
|
|
return mp_obj_new_bytes(ipcc_membuf_sys_cmd_buf, len);
|
|
}
|
|
MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(rfcore_sys_hci_obj, 3, 4, rfcore_sys_hci);
|
|
|
|
#endif // defined(STM32WB)
|