circuitpython/ports/stm32/mboot/dfu.h

118 lines
4.4 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2017-2019 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#ifndef MICROPY_INCLUDED_STM32_MBOOT_DFU_H
#define MICROPY_INCLUDED_STM32_MBOOT_DFU_H
#include <stdint.h>
// DFU spec: https://www.usb.org/sites/default/files/DFU_1.1.pdf
#define DFU_XFER_SIZE (2048)
// The DFU standard allows for error messages to be sent (via str index) in GETSTATUS responses
#define MBOOT_ERROR_STR_OVERWRITE_BOOTLOADER_IDX 0x10
#define MBOOT_ERROR_STR_OVERWRITE_BOOTLOADER "Can't overwrite mboot"
#define MBOOT_ERROR_STR_INVALID_ADDRESS_IDX 0x11
#define MBOOT_ERROR_STR_INVALID_ADDRESS "Address out of range"
#if MBOOT_ENABLE_PACKING
#define MBOOT_ERROR_STR_INVALID_SIG_IDX 0x12
#define MBOOT_ERROR_STR_INVALID_SIG "Invalid signature in file"
#define MBOOT_ERROR_STR_INVALID_READ_IDX 0x13
#define MBOOT_ERROR_STR_INVALID_READ "Read support disabled on encrypted bootloader"
#endif
// DFU class requests
enum {
DFU_DETACH = 0,
DFU_DNLOAD = 1,
DFU_UPLOAD = 2,
DFU_GETSTATUS = 3,
DFU_CLRSTATUS = 4,
DFU_GETSTATE = 5,
DFU_ABORT = 6,
};
// DFU States
typedef enum {
DFU_STATE_IDLE = 2,
DFU_STATE_BUSY = 4,
DFU_STATE_DNLOAD_IDLE = 5,
DFU_STATE_MANIFEST = 7,
DFU_STATE_UPLOAD_IDLE = 9,
DFU_STATE_ERROR = 0xa,
} dfu_state_t;
typedef enum {
DFU_CMD_NONE = 0,
DFU_CMD_EXIT = 1,
DFU_CMD_UPLOAD = 7,
DFU_CMD_DNLOAD = 8,
} dfu_cmd_t;
enum {
DFU_CMD_DNLOAD_SET_ADDRESS = 0x21,
DFU_CMD_DNLOAD_ERASE = 0x41,
DFU_CMD_DNLOAD_READ_UNPROTECT = 0x92,
};
// Error status flags
typedef enum {
DFU_STATUS_OK = 0x00, // No error condition is present.
DFU_STATUS_ERROR_TARGET = 0x01, // File is not targeted for use by this device.
DFU_STATUS_ERROR_FILE = 0x02, // File is for this device but fails some vendor-specific verification test.
DFU_STATUS_ERROR_WRITE = 0x03, // Device is unable to write memory.
DFU_STATUS_ERROR_ERASE = 0x04, // Memory erase function failed.
DFU_STATUS_ERROR_CHECK_ERASED = 0x05, // Memory erase check failed.
DFU_STATUS_ERROR_PROG = 0x06, // Program memory function failed.
DFU_STATUS_ERROR_VERIFY = 0x07, // Programmed memory failed verification.
DFU_STATUS_ERROR_ADDRESS = 0x08, // Cannot program memory due to received address that is out of range.
DFU_STATUS_ERROR_NOTDONE = 0x09, // Received DFU_DNLOAD with wLength = 0, but device does not think it has all of the data yet.
DFU_STATUS_ERROR_FIRMWARE = 0x0A, // Device's firmware is corrupt. It cannot return to run-time (non-DFU) operations.
DFU_STATUS_ERROR_VENDOR = 0x0B, // iString indicates a vendor-specific error.
DFU_STATUS_ERROR_USBR = 0x0C, // Device detected unexpected USB reset signaling.
DFU_STATUS_ERROR_POR = 0x0D, // Device detected unexpected power on reset.
DFU_STATUS_ERROR_UNKNOWN = 0x0E, // Something went wrong, but the device does not know what it was.
DFU_STATUS_ERROR_STALLEDPKT = 0x0F, // Device stalled an unexpected request.
} dfu_status_t;
typedef struct _dfu_state_t {
dfu_state_t state;
dfu_cmd_t cmd;
dfu_status_t status;
uint8_t error;
uint16_t wBlockNum;
uint16_t wLength;
uint32_t addr;
uint8_t buf[DFU_XFER_SIZE] __attribute__((aligned(4)));
} dfu_context_t;
extern dfu_context_t dfu_context;
#endif // MICROPY_INCLUDED_STM32_MBOOT_DFU_H