circuitpython/ports/samd/machine_bitstream.c

207 lines
6.6 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Jim Mussared
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// This is a translation of the cycle counter implementation in ports/stm32/machine_bitstream.c.
#include "py/mpconfig.h"
#include "py/mphal.h"
#include "clock_config.h"
#if MICROPY_PY_MACHINE_BITSTREAM
#if __CORTEX_M == 0
// No cycle counter on M0, do manual cycle counting instead.
// STM32F091 @ 48MHz
#define NS_CYCLES_PER_ITER_HIGH (3)
#define NS_CYCLES_PER_ITER_LOW (3)
#define NS_OVERHEAD_CYCLES_HIGH (12)
#define NS_OVERHEAD_CYCLES_LOW (15)
uint32_t mp_hal_delay_ns_calc(uint32_t ns, bool high) {
uint32_t ncycles = (get_cpu_freq() / 1000000 * ns + 500) / 1000; // + 500 for proper rounding
uint32_t overhead = MIN(ncycles, high ? NS_OVERHEAD_CYCLES_HIGH : NS_OVERHEAD_CYCLES_LOW);
return MAX(1, MP_ROUND_DIVIDE(ncycles - overhead, high ? NS_CYCLES_PER_ITER_HIGH : NS_CYCLES_PER_ITER_LOW));
}
void machine_bitstream_high_low(mp_hal_pin_obj_t pin, uint32_t *timing_ns, const uint8_t *buf, size_t len) {
volatile const uint32_t mask = 1 << (pin % 32);
volatile uint32_t *outclr = &PORT->Group[pin / 32].OUTCLR.reg;
volatile uint32_t *outset = &PORT->Group[pin / 32].OUTSET.reg;
// Convert ns to loop iterations [high_time_0, low_time_0, high_time_1, low_time_1].
for (size_t i = 0; i < 4; ++i) {
timing_ns[i] = mp_hal_delay_ns_calc(timing_ns[i], i % 2 == 0);
}
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
// Measured timing for SAMD21 at 48MHz (cycle=20.83ns)
// timing_ns = (1,1,1,1)
// high: 310
// low: 375
// high0: 375
// low0: 400
// timing_ns = (500, 500, 500, 500)
// high: 500
// low: 500
// high0: 565
// low0: 540
// timing_ns = (1000, 1000, 1000, 1000)
// high: 1000
// low: 1000
// high0: 1065
// low0: 1040
// --> high is 12 + n*3 cycles
// low is 15 + n*3 cycles
// NeoPixel timing (400, 850, 800, 450) (+/-150ns) gives timing_ns=(2, 9, 8, 3) which in cycles is
// (12 + 6, 15 + 27, 15 + 24, 12 + 9) = (18, 42, 39, 21)
// --> (375, 875, 812, 437) nanoseconds.
// Measured output on logic analyser is (375, 875, 815, 435) (+/-5ns at 200MHz)
// Note: the first high/low cycle is longer by 2-3 cycles (40-60ns).
// This is slightly outside spec, but doesn't seem to cause a problem.
__asm volatile (
// Force consistent register assignment.
// r6 = len
"ldr r6, %0\n"
// r4 = buf
"ldr r4, %1\n"
// r5 = timing_ms
"ldr r5, %2\n"
// Must align for consistent timing.
".align 4\n"
// Don't increment/decrement before first iteration.
"b .outer2\n"
".outer:\n"
// ++buf, --len
" add r4, #1\n"
" sub r6, #1\n"
// len iterations
".outer2:\n"
" cmp r6, #0\n"
" beq .done\n"
// r0 = *buf
" ldrb r0, [r4, #0]\n"
// 8 bits in byte
" mov r7, #8\n"
" .inner:\n"
// *outset = mask
" ldr r2, %3\n"
" ldr r1, %5\n"
" str r1, [r2, #0]\n"
// r3 = (r0 >> 4) & 8 (r0 is 8 if high bit is 1 else 0)
" mov r8, r6\n"
" lsr r3, r0, #4\n"
" mov r6, #8\n"
" and r3, r6\n"
" mov r6, r8\n"
// r2 = timing_ns[r2]
" ldr r2, [r5, r3]\n"
" .loop1:\n sub r2, #1\n bne .loop1\n"
// *outclr = mask
" ldr r2, %4\n"
" str r1, [r2, #0]\n"
// r2 = timing_ns[r3 + 4]
" add r3, #4\n"
" ldr r2, [r5, r3]\n"
" .loop2:\n sub r2, #1\n bne .loop2\n"
// b >>= 1
" lsl r0, r0, #1\n"
" sub r7, #1\n"
// end of inner loop
" beq .outer\n"
// continue inner loop
" b .inner\n"
".done:\n"
:
: "m" (len), "m" (buf), "m" (timing_ns), "m" (outset), "m" (outclr), "m" (mask)
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8"
);
MICROPY_END_ATOMIC_SECTION(atomic_state);
}
#else // > CORTEX_M0
#define NS_TICKS_OVERHEAD (70)
void machine_bitstream_high_low(mp_hal_pin_obj_t pin, uint32_t *timing_ns, const uint8_t *buf, size_t len) {
uint32_t fcpu_mhz = get_cpu_freq() / 1000000;
uint32_t ticks_overhead = fcpu_mhz * NS_TICKS_OVERHEAD / 1000;
// Convert ns to us ticks [high_time_0, period_0, high_time_1, period_1].
for (size_t i = 0; i < 4; ++i) {
timing_ns[i] = fcpu_mhz * timing_ns[i] / 1000;
if (timing_ns[i] > ticks_overhead) {
timing_ns[i] -= ticks_overhead;
}
if (i % 2 == 1) {
// Convert low_time to period (i.e. add high_time).
timing_ns[i] += timing_ns[i - 1] - ticks_overhead;
}
}
mp_uint_t atomic_state = MICROPY_BEGIN_ATOMIC_SECTION();
DWT->CYCCNT = 0;
for (size_t i = 0; i < len; ++i) {
uint8_t b = buf[i];
for (size_t j = 0; j < 8; ++j) {
uint32_t start_ticks = mp_hal_ticks_cpu();
uint32_t *t = &timing_ns[b >> 6 & 2];
mp_hal_pin_high(pin);
while ((mp_hal_ticks_cpu() - start_ticks) < t[0]) {
}
b <<= 1;
mp_hal_pin_low(pin);
while ((mp_hal_ticks_cpu() - start_ticks) < t[1]) {
}
}
}
MICROPY_END_ATOMIC_SECTION(atomic_state);
}
#endif // > CORTEX_M0
#endif // MICROPY_PY_MACHINE_BITSTREAM