40118bcf57
This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786
130 lines
4.8 KiB
C
130 lines
4.8 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "supervisor/board.h"
|
|
#include "mpconfigboard.h"
|
|
#include "hal/include/hal_gpio.h"
|
|
|
|
#include "shared-bindings/busio/SPI.h"
|
|
#include "shared-bindings/displayio/FourWire.h"
|
|
|
|
#include "shared-module/displayio/__init__.h"
|
|
#include "shared-module/displayio/mipi_constants.h"
|
|
|
|
#define DELAY 0x80
|
|
|
|
uint8_t display_init_sequence[] = {
|
|
0x01, DELAY, 100/5, // Soft reset, then delay 10 ms
|
|
0xB9, 3, 0xFF, 0x83, 0x57, // Extension command set
|
|
0xFF, DELAY, 500/5,
|
|
0xB3, 4, 0x80, 0x00, 0x06, 0x06, // 0x80 enables SDO pin (0x00 disables)
|
|
0xB6, 2, 0x01, 0x25, // -1.52V
|
|
0xB0, 1, 0x68, // Normal mode 70Hz, Idle mode 55 Hz
|
|
0xCC, 1, 0x05,
|
|
0xB1, 6,
|
|
0x00, // Not deep standby
|
|
0x15, // BT
|
|
0x1C, // VSPR
|
|
0x1C, // VSNR
|
|
0x83, // AP
|
|
0xAA, // FS
|
|
0xC0, 6,
|
|
0x50, // OPON normal
|
|
0x50, // OPON idle
|
|
0x01, // STBA
|
|
0x3C, // STBA
|
|
0x1E, // STBA
|
|
0x08, // GEN
|
|
0xB4, 7,
|
|
0x02, // NW 0x02
|
|
0x40, // RTN
|
|
0x00, // DIV
|
|
0x2A, // DUM
|
|
0x2A, // DUM
|
|
0x0D, // GDON
|
|
0x78, // GDOFF
|
|
0xE0, 34,
|
|
0x02, 0x0A, 0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b,
|
|
0x42, 0x3A, 0x27, 0x1B, 0x08, 0x09, 0x03, 0x02, 0x0A,
|
|
0x11, 0x1d, 0x23, 0x35, 0x41, 0x4b, 0x4b, 0x42, 0x3A,
|
|
0x27, 0x1B, 0x08, 0x09, 0x03, 0x00, 0x01,
|
|
0x3a, 1, 0x55,
|
|
0x36, 1, 0x60,
|
|
0x11, DELAY, 150/5, // Exit Sleep, then delay 150 ms
|
|
0x29, DELAY, 50/5
|
|
};
|
|
|
|
void board_init(void) {
|
|
displayio_parallelbus_obj_t* bus = &displays[0].parallel_bus;
|
|
bus->base.type = &displayio_parallelbus_type;
|
|
common_hal_displayio_parallelbus_construct(bus,
|
|
&pin_PA16, // Data0
|
|
&pin_PB05, // Command or data
|
|
&pin_PB06, // Chip select
|
|
&pin_PB09, // Write
|
|
&pin_PB04, // Read
|
|
&pin_PA00); // Reset
|
|
|
|
displayio_display_obj_t* display = &displays[0].display;
|
|
display->base.type = &displayio_display_type;
|
|
common_hal_displayio_display_construct(display,
|
|
bus,
|
|
480, // Width
|
|
320, // Height
|
|
0, // column start
|
|
0, // row start
|
|
0, // rotation
|
|
16, // Color depth
|
|
false, // grayscale
|
|
false, // pixels_in_byte_share_row (unused for depths > 8)
|
|
1, // bytes per cell. Only valid for depths < 8
|
|
false, // reverse_pixels_in_byte. Only valid for depths < 8
|
|
true, // reverse_pixels_in_word
|
|
MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
|
|
MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
|
|
MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
|
|
0x37, // Set vertical scroll command
|
|
display_init_sequence,
|
|
sizeof(display_init_sequence),
|
|
&pin_PB31, // Backlight pin
|
|
NO_BRIGHTNESS_COMMAND,
|
|
1.0f, // brightness (ignored)
|
|
true, // auto_brightness
|
|
false, // single_byte_bounds
|
|
false, // data_as_commands
|
|
true, // auto_refresh
|
|
60, // native_frames_per_second
|
|
true, // backlight_on_high
|
|
false); // SH1107_addressing
|
|
}
|
|
|
|
bool board_requests_safe_mode(void) {
|
|
return false;
|
|
}
|
|
|
|
void reset_board(void) {
|
|
}
|