History

Neradoc 4d05bb26bf change board.ID to board.board_id		2021-08-26 23:11:55 +02:00
..
README.md	add nRF52840 based Makerdiary Pitaya Go	2020-04-30 07:38:20 +00:00
board.c	run code formatting script	2021-03-15 19:27:36 +05:30
mpconfigboard.h	add nRF52840 based Makerdiary Pitaya Go	2020-04-30 07:38:20 +00:00
mpconfigboard.mk	Automatically count EXTERNAL_FLASH_DEVICES	2021-03-07 11:48:39 -06:00
pins.c	change board.ID to board.board_id	2021-08-26 23:11:55 +02:00

README.md

Makerdiary Pitaya Go

Pitaya Go is a compact and versatile development platform for IoT solutions, combining the Nordic's high-end multiprotocol SoC nRF52840 and the Microchip's extreme low power Wi-Fi® network controller ATWINC1500B. It offers a complete solution for wireless connectivity with IEEE 802.11 b/g/n, Bluetooth 5, Thread and Zigbee, that is specifically designed for the IoT. Pitaya Go features a Battery Charger with power path management, 64Mbit ultra low power QSPI Flash memory, additional NFC-A Tag PCB Antenna, user programmable RGB LED and Buttons, reversible USB-C Connector and easily expandable Header Sockets. All these features above make this board an ideal choice for the next IoT project.

from Makerdiary

Installing CircuitPython submodules

Before you can build, you will need to run the following commands once, which will install the submodules that are part of the CircuitPython ecosystem, and build the mpy-cross tool:

$ cd circuitpython
$ git submodule update --init
$ make -C mpy-cross

Building

$ cd ports/nrf
$ make BOARD=pitaya_go SD=s140 -V=1 -j4

Flashing CircuitPython

The Pitaya Go has a pre-programmed bootloader which can be used to program the Pitaya Go. Follow the guide - How to Program Pitaya Go to flash the CircuitPython firmware.