circuitpython/ports/raspberrypi/common-hal/alarm/__init__.c
2023-08-14 00:59:22 -04:00

277 lines
9.2 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2021 Lucian Copeland for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "py/gc.h"
#include "py/obj.h"
#include "py/objtuple.h"
#include "py/runtime.h"
#include "shared/runtime/interrupt_char.h"
#include "shared-bindings/alarm/__init__.h"
#include "shared-bindings/alarm/SleepMemory.h"
#include "shared-bindings/alarm/pin/PinAlarm.h"
#include "shared-bindings/alarm/time/TimeAlarm.h"
#include "shared-bindings/alarm/touch/TouchAlarm.h"
#include "shared-bindings/microcontroller/__init__.h"
#if CIRCUITPY_CYW43
#include "bindings/cyw43/__init__.h"
#endif
#include "supervisor/port.h"
#include "supervisor/shared/workflow.h"
#include "pico/stdlib.h"
#include "hardware/sync.h"
#include "hardware/clocks.h"
#include "hardware/xosc.h"
#include "hardware/structs/scb.h"
#include "hardware/watchdog.h"
#include "hardware/structs/watchdog.h"
// XOSC shutdown
#include "hardware/rtc.h"
#include "hardware/pll.h"
#include "hardware/regs/io_bank0.h"
// Watchdog scratch register
// Not used elsewhere in the SDK for now, keep an eye on it
#define RP_WKUP_SCRATCH_REG 0
// Light sleep turns off nonvolatile Busio and other wake-only peripherals
// TODO: this only saves about 2mA right now, expand with other non-essentials
const uint32_t RP_LIGHTSLEEP_EN0_MASK = ~(
CLOCKS_SLEEP_EN0_CLK_SYS_SPI1_BITS |
CLOCKS_SLEEP_EN0_CLK_PERI_SPI1_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_SPI0_BITS |
CLOCKS_SLEEP_EN0_CLK_PERI_SPI0_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_PWM_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_PIO1_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_PIO0_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_I2C1_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_I2C0_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_ADC_BITS |
CLOCKS_SLEEP_EN0_CLK_ADC_ADC_BITS
);
// This bank has the USB clocks in it, leave it for now
const uint32_t RP_LIGHTSLEEP_EN1_MASK = CLOCKS_SLEEP_EN1_RESET;
// Light sleeps used for TimeAlarm deep sleep turn off almost everything
const uint32_t RP_LIGHTSLEEP_EN0_MASK_HARSH = (
CLOCKS_SLEEP_EN0_CLK_RTC_RTC_BITS |
CLOCKS_SLEEP_EN0_CLK_SYS_PADS_BITS
);
const uint32_t RP_LIGHTSLEEP_EN1_MASK_HARSH = 0x0;
STATIC void prepare_for_dormant_xosc(void);
// Singleton instance of SleepMemory.
const alarm_sleep_memory_obj_t alarm_sleep_memory_obj = {
.base = {
.type = &alarm_sleep_memory_type,
},
};
// Non-heap alarm object recording alarm (if any) that woke up CircuitPython after light or deep sleep.
// This object lives across VM instantiations, so none of these objects can contain references to the heap.
alarm_wake_alarm_union_t alarm_wake_alarm;
void alarm_reset(void) {
alarm_sleep_memory_reset();
alarm_pin_pinalarm_reset();
alarm_time_timealarm_reset();
// Reset the scratch source
watchdog_hw->scratch[RP_WKUP_SCRATCH_REG] = RP_SLEEP_WAKEUP_UNDEF;
}
STATIC uint8_t _get_wakeup_cause(void) {
// First check if the modules remember what last woke up
if (alarm_pin_pinalarm_woke_this_cycle()) {
return RP_SLEEP_WAKEUP_GPIO;
}
if (alarm_time_timealarm_woke_this_cycle()) {
return RP_SLEEP_WAKEUP_RTC;
}
// If waking from true deep sleep, modules will have lost their state,
// so check the deep wakeup cause manually
if (watchdog_hw->scratch[RP_WKUP_SCRATCH_REG] != RP_SLEEP_WAKEUP_UNDEF) {
return watchdog_hw->scratch[RP_WKUP_SCRATCH_REG];
}
return RP_SLEEP_WAKEUP_UNDEF;
}
// Set up light sleep or deep sleep alarms.
STATIC void _setup_sleep_alarms(bool deep_sleep, size_t n_alarms, const mp_obj_t *alarms) {
alarm_pin_pinalarm_set_alarms(deep_sleep, n_alarms, alarms);
alarm_time_timealarm_set_alarms(deep_sleep, n_alarms, alarms);
}
bool common_hal_alarm_woken_from_sleep(void) {
return _get_wakeup_cause() != RP_SLEEP_WAKEUP_UNDEF;
}
mp_obj_t common_hal_alarm_record_wake_alarm(void) {
// If woken from deep sleep, create a copy alarm similar to what would have
// been passed in originally. Otherwise, just return none
uint8_t cause = _get_wakeup_cause();
switch (cause) {
case RP_SLEEP_WAKEUP_RTC: {
return alarm_time_timealarm_record_wake_alarm();
}
case RP_SLEEP_WAKEUP_GPIO: {
return alarm_pin_pinalarm_record_wake_alarm();
}
case RP_SLEEP_WAKEUP_UNDEF:
default:
// Not a deep sleep reset.
break;
}
return mp_const_none;
}
mp_obj_t common_hal_alarm_light_sleep_until_alarms(size_t n_alarms, const mp_obj_t *alarms) {
_setup_sleep_alarms(false, n_alarms, alarms);
mp_obj_t wake_alarm = mp_const_none;
while (!mp_hal_is_interrupted()) {
RUN_BACKGROUND_TASKS;
// Detect if interrupt was alarm or ctrl-C interrupt.
if (common_hal_alarm_woken_from_sleep()) {
uint8_t cause = _get_wakeup_cause();
switch (cause) {
case RP_SLEEP_WAKEUP_RTC: {
wake_alarm = alarm_time_timealarm_find_triggered_alarm(n_alarms, alarms);
break;
}
case RP_SLEEP_WAKEUP_GPIO: {
wake_alarm = alarm_pin_pinalarm_find_triggered_alarm(n_alarms, alarms);
break;
}
default:
// Should not reach this, if all light sleep types are covered correctly
break;
}
shared_alarm_save_wake_alarm(wake_alarm);
break;
}
// Prune the clock for sleep
clocks_hw->sleep_en0 &= RP_LIGHTSLEEP_EN0_MASK;
clocks_hw->sleep_en1 = RP_LIGHTSLEEP_EN1_MASK;
// Enable System Control Block (SCB) deep sleep
uint save = scb_hw->scr;
scb_hw->scr = save | M0PLUS_SCR_SLEEPDEEP_BITS;
__wfi();
}
if (mp_hal_is_interrupted()) {
return mp_const_none; // Shouldn't be given to python code because exception handling should kick in.
}
alarm_reset();
return wake_alarm;
}
void common_hal_alarm_set_deep_sleep_alarms(size_t n_alarms, const mp_obj_t *alarms, size_t n_dios, digitalio_digitalinout_obj_t **preserve_dios) {
if (n_dios > 0) {
mp_raise_NotImplementedError_varg(translate("%q"), MP_QSTR_preserve_dios);
}
_setup_sleep_alarms(true, n_alarms, alarms);
}
void NORETURN common_hal_alarm_enter_deep_sleep(void) {
bool timealarm_set = alarm_time_timealarm_is_set();
#if CIRCUITPY_CYW43
cyw43_enter_deep_sleep();
#endif
// If there's a timealarm, just enter a very deep light sleep
if (timealarm_set) {
// Prune the clock for sleep
clocks_hw->sleep_en0 &= RP_LIGHTSLEEP_EN0_MASK_HARSH;
clocks_hw->sleep_en1 = RP_LIGHTSLEEP_EN1_MASK_HARSH;
// Enable System Control Block (SCB) deep sleep
uint save = scb_hw->scr;
scb_hw->scr = save | M0PLUS_SCR_SLEEPDEEP_BITS;
__wfi();
} else {
prepare_for_dormant_xosc();
xosc_dormant();
}
// // TODO: support ROSC when available in SDK
// rosc_set_dormant();
// Reset uses the watchdog. Use scratch registers to store wake reason
watchdog_hw->scratch[RP_WKUP_SCRATCH_REG] = _get_wakeup_cause();
// Just before reset, enable the pinalarm interrupt.
alarm_pin_pinalarm_entering_deep_sleep();
reset_cpu();
}
void common_hal_alarm_gc_collect(void) {
gc_collect_ptr(shared_alarm_get_wake_alarm());
}
STATIC void prepare_for_dormant_xosc(void) {
// TODO: add ROSC support with sleep_run_from_dormant_source when it's added to SDK
uint src_hz = XOSC_MHZ * MHZ;
uint clk_ref_src = CLOCKS_CLK_REF_CTRL_SRC_VALUE_XOSC_CLKSRC;
clock_configure(clk_ref,
clk_ref_src,
0, // No aux mux
src_hz,
src_hz);
clock_configure(clk_sys,
CLOCKS_CLK_SYS_CTRL_SRC_VALUE_CLK_REF,
0, // Using glitchless mux
src_hz,
src_hz);
clock_stop(clk_usb);
clock_stop(clk_adc);
uint clk_rtc_src = CLOCKS_CLK_RTC_CTRL_AUXSRC_VALUE_XOSC_CLKSRC;
clock_configure(clk_rtc,
0, // No GLMUX
clk_rtc_src,
src_hz,
46875);
clock_configure(clk_peri,
0,
CLOCKS_CLK_PERI_CTRL_AUXSRC_VALUE_CLK_SYS,
src_hz,
src_hz);
pll_deinit(pll_sys);
pll_deinit(pll_usb);
}