circuitpython/stm/stmusbd/usbd_ioreq.c

245 lines
5.6 KiB
C

/**
******************************************************************************
* @file usbd_ioreq.c
* @author MCD Application Team
* @version V1.1.0
* @date 19-March-2012
* @brief This file provides the IO requests APIs for control endpoints.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "usbd_ioreq.h"
/** @addtogroup STM32_USB_OTG_DEVICE_LIBRARY
* @{
*/
/** @defgroup USBD_IOREQ
* @brief control I/O requests module
* @{
*/
/** @defgroup USBD_IOREQ_Private_TypesDefinitions
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Defines
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Macros
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Variables
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
* @{
*/
/**
* @}
*/
/** @defgroup USBD_IOREQ_Private_Functions
* @{
*/
/**
* @brief USBD_CtlSendData
* send data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_Status USBD_CtlSendData (USB_OTG_CORE_HANDLE *pdev,
uint8_t *pbuf,
uint16_t len)
{
USBD_Status ret = USBD_OK;
pdev->dev.in_ep[0].total_data_len = len;
pdev->dev.in_ep[0].rem_data_len = len;
pdev->dev.device_state = USB_OTG_EP0_DATA_IN;
DCD_EP_Tx (pdev, 0, pbuf, len);
return ret;
}
/**
* @brief USBD_CtlContinueSendData
* continue sending data on the ctl pipe
* @param pdev: device instance
* @param buff: pointer to data buffer
* @param len: length of data to be sent
* @retval status
*/
USBD_Status USBD_CtlContinueSendData (USB_OTG_CORE_HANDLE *pdev,
uint8_t *pbuf,
uint16_t len)
{
USBD_Status ret = USBD_OK;
DCD_EP_Tx (pdev, 0, pbuf, len);
return ret;
}
/**
* @brief USBD_CtlPrepareRx
* receive data on the ctl pipe
* @param pdev: USB OTG device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_Status USBD_CtlPrepareRx (USB_OTG_CORE_HANDLE *pdev,
uint8_t *pbuf,
uint16_t len)
{
USBD_Status ret = USBD_OK;
pdev->dev.out_ep[0].total_data_len = len;
pdev->dev.out_ep[0].rem_data_len = len;
pdev->dev.device_state = USB_OTG_EP0_DATA_OUT;
DCD_EP_PrepareRx (pdev,
0,
pbuf,
len);
return ret;
}
/**
* @brief USBD_CtlContinueRx
* continue receive data on the ctl pipe
* @param pdev: USB OTG device instance
* @param buff: pointer to data buffer
* @param len: length of data to be received
* @retval status
*/
USBD_Status USBD_CtlContinueRx (USB_OTG_CORE_HANDLE *pdev,
uint8_t *pbuf,
uint16_t len)
{
USBD_Status ret = USBD_OK;
DCD_EP_PrepareRx (pdev,
0,
pbuf,
len);
return ret;
}
/**
* @brief USBD_CtlSendStatus
* send zero lzngth packet on the ctl pipe
* @param pdev: USB OTG device instance
* @retval status
*/
USBD_Status USBD_CtlSendStatus (USB_OTG_CORE_HANDLE *pdev)
{
USBD_Status ret = USBD_OK;
pdev->dev.device_state = USB_OTG_EP0_STATUS_IN;
DCD_EP_Tx (pdev,
0,
NULL,
0);
USB_OTG_EP0_OutStart(pdev);
return ret;
}
/**
* @brief USBD_CtlReceiveStatus
* receive zero lzngth packet on the ctl pipe
* @param pdev: USB OTG device instance
* @retval status
*/
USBD_Status USBD_CtlReceiveStatus (USB_OTG_CORE_HANDLE *pdev)
{
USBD_Status ret = USBD_OK;
pdev->dev.device_state = USB_OTG_EP0_STATUS_OUT;
DCD_EP_PrepareRx ( pdev,
0,
NULL,
0);
USB_OTG_EP0_OutStart(pdev);
return ret;
}
/**
* @brief USBD_GetRxCount
* returns the received data length
* @param pdev: USB OTG device instance
* epnum: endpoint index
* @retval Rx Data blength
*/
uint16_t USBD_GetRxCount (USB_OTG_CORE_HANDLE *pdev , uint8_t epnum)
{
return pdev->dev.out_ep[epnum].xfer_count;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/