circuitpython/shared-bindings/microcontroller/__init__.c

199 lines
7.0 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Scott Shawcroft
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Microcontroller contains pin references and microcontroller specific control
// functions.
#include <stdint.h>
#include "py/obj.h"
#include "py/runtime.h"
#include "common-hal/microcontroller/Pin.h"
#include "common-hal/microcontroller/Processor.h"
#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-bindings/microcontroller/Processor.h"
#include "py/runtime.h"
#include "supervisor/shared/translate.h"
//| :mod:`microcontroller` --- Pin references and cpu functionality
//| ================================================================
//|
//| .. module:: microcontroller
//| :synopsis: Pin references and core functionality
//| :platform: SAMD21, ESP8266
//|
//| The `microcontroller` module defines the pins from the perspective of the
//| microcontroller. See `board` for board-specific pin mappings.
//|
//| Libraries
//|
//| .. toctree::
//| :maxdepth: 3
//|
//| Pin
//| Processor
//| RunMode
//|
//| .. data:: cpu
//|
//| CPU information and control, such as ``cpu.temperature`` and ``cpu.frequency``
//| (clock frequency).
//| This object is the sole instance of `microcontroller.Processor`.
//|
//| .. function:: delay_us(delay)
//|
//| Dedicated delay method used for very short delays. **Do not** do long delays
//| because this stops all other functions from completing. Think of this as an empty
//| ``while`` loop that runs for the specified ``(delay)`` time. If you have other
//| code or peripherals (e.g audio recording) that require specific timing or
//| processing while you are waiting, explore a different avenue such as using
//| `time.sleep()`.
//|
STATIC mp_obj_t mcu_delay_us(mp_obj_t delay_obj) {
uint32_t delay = mp_obj_get_int(delay_obj);
common_hal_mcu_delay_us(delay);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_delay_us_obj, mcu_delay_us);
//| .. function:: disable_interrupts()
//|
//| Disable all interrupts. Be very careful, this can stall everything.
//|
STATIC mp_obj_t mcu_disable_interrupts(void) {
common_hal_mcu_disable_interrupts();
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_disable_interrupts_obj, mcu_disable_interrupts);
//| .. function:: enable_interrupts()
//|
//| Enable the interrupts that were enabled at the last disable.
//|
STATIC mp_obj_t mcu_enable_interrupts(void) {
common_hal_mcu_enable_interrupts();
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_enable_interrupts_obj, mcu_enable_interrupts);
//| .. function:: on_next_reset(run_mode)
//|
//| Configure the run mode used the next time the microcontroller is reset but
//| not powered down.
//|
//| :param ~microcontroller.RunMode run_mode: The next run mode
//|
STATIC mp_obj_t mcu_on_next_reset(mp_obj_t run_mode_obj) {
mcu_runmode_t run_mode;
if (run_mode_obj == &mcu_runmode_normal_obj) {
run_mode = RUNMODE_NORMAL;
} else if (run_mode_obj == &mcu_runmode_safe_mode_obj) {
run_mode = RUNMODE_SAFE_MODE;
} else if (run_mode_obj == &mcu_runmode_bootloader_obj) {
run_mode = RUNMODE_BOOTLOADER;
} else {
mp_raise_ValueError(translate("Invalid run mode."));
}
common_hal_mcu_on_next_reset(run_mode);
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_1(mcu_on_next_reset_obj, mcu_on_next_reset);
//| .. function:: reset()
//|
//| Reset the microcontroller. After reset, the microcontroller will enter the
//| run mode last set by `on_next_reset`.
//|
//| .. warning:: This may result in file system corruption when connected to a
//| host computer. Be very careful when calling this! Make sure the device
//| "Safely removed" on Windows or "ejected" on Mac OSX and Linux.
//|
STATIC mp_obj_t mcu_reset(void) {
common_hal_mcu_reset();
// We won't actually get here because we're resetting.
return mp_const_none;
}
STATIC MP_DEFINE_CONST_FUN_OBJ_0(mcu_reset_obj, mcu_reset);
//| .. data:: nvm
//|
//| Available non-volatile memory.
//| This object is the sole instance of `nvm.ByteArray` when available or ``None`` otherwise.
//|
//| :type: nvm.ByteArray or None
//|
//| :mod:`microcontroller.pin` --- Microcontroller pin names
//| --------------------------------------------------------
//|
//| .. module:: microcontroller.pin
//| :synopsis: Microcontroller pin names
//| :platform: SAMD21
//|
//| References to pins as named by the microcontroller
//|
const mp_obj_module_t mcu_pin_module = {
.base = { &mp_type_module },
.globals = (mp_obj_dict_t*)&mcu_pin_globals,
};
STATIC const mp_rom_map_elem_t mcu_module_globals_table[] = {
{ MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_microcontroller) },
{ MP_ROM_QSTR(MP_QSTR_cpu), MP_ROM_PTR(&common_hal_mcu_processor_obj) },
{ MP_ROM_QSTR(MP_QSTR_delay_us), MP_ROM_PTR(&mcu_delay_us_obj) },
{ MP_ROM_QSTR(MP_QSTR_disable_interrupts), MP_ROM_PTR(&mcu_disable_interrupts_obj) },
{ MP_ROM_QSTR(MP_QSTR_enable_interrupts), MP_ROM_PTR(&mcu_enable_interrupts_obj) },
{ MP_ROM_QSTR(MP_QSTR_on_next_reset), MP_ROM_PTR(&mcu_on_next_reset_obj) },
{ MP_ROM_QSTR(MP_QSTR_reset), MP_ROM_PTR(&mcu_reset_obj) },
#if CIRCUITPY_INTERNAL_NVM_SIZE > 0
{ MP_ROM_QSTR(MP_QSTR_nvm), MP_ROM_PTR(&common_hal_mcu_nvm_obj) },
#else
{ MP_ROM_QSTR(MP_QSTR_nvm), MP_ROM_PTR(&mp_const_none_obj) },
#endif
{ MP_ROM_QSTR(MP_QSTR_RunMode), MP_ROM_PTR(&mcu_runmode_type) },
{ MP_ROM_QSTR(MP_QSTR_Pin), MP_ROM_PTR(&mcu_pin_type) },
{ MP_ROM_QSTR(MP_QSTR_pin), MP_ROM_PTR(&mcu_pin_module) },
{ MP_ROM_QSTR(MP_QSTR_Processor), MP_ROM_PTR(&mcu_processor_type) },
};
STATIC MP_DEFINE_CONST_DICT(mcu_module_globals, mcu_module_globals_table);
const mp_obj_module_t microcontroller_module = {
.base = { &mp_type_module },
.globals = (mp_obj_dict_t*)&mcu_module_globals,
};