dc76306cfa
nRF CircuitPython boards will now provide the file transfer service defined here: https://github.com/adafruit/Adafruit_CircuitPython_BLE_File_Transfer USB capable boards will only advertise if previously bonded to a device or if the reset button is pressed during the fast blue flashes on start up. When pressed, the board will restart again but the blue period will not flash. Boards without USB will always advertise. When previously bonded, the advertisement is private so that no other peers can connect. If advertising publicly, the tx power is lowered to reduce the likelihood of bonding from a distance. This PR also fixes issues with loading identities of bonded peers so that our address can now be resolved and we can resolve others' addresses when scanning. |
||
|---|---|---|
| .. | ||
| bluetooth | ||
| boards | ||
| common-hal | ||
| device/nrf52 | ||
| examples | ||
| freeze | ||
| nrfx@3f55e49eb1 | ||
| peripherals/nrf | ||
| supervisor | ||
| .gitignore | ||
| background.c | ||
| background.h | ||
| fatfs_port.c | ||
| gccollect.c | ||
| ld_defines.c | ||
| Makefile | ||
| mpconfigport.h | ||
| mpconfigport.mk | ||
| mphalport.h | ||
| nrfx_config.h | ||
| nrfx_glue.h | ||
| nrfx_log.h | ||
| qstrdefsport.h | ||
| README.md | ||
| sd_mutex.c | ||
| sd_mutex.h | ||
CircuitPython Port To The Nordic Semiconductor nRF52 Series
This is a port of CircuitPython to the Nordic Semiconductor nRF52 series of chips.
Note
: There are board-specific READMEs that may be more up to date than the generic board-neutral documentation below.
Flash
Some boards have UF2 bootloaders and can simply be flashed in the normal way, by copying firmware.uf2 to the BOOT drive.
For some boards, you can use the flash target:
make BOARD=pca10056 flash
Segger Targets
Install the necessary tools to flash and debug using Segger:
note: On Linux it might be required to link SEGGER's libjlinkarm.so inside nrfjprog's folder.
DFU Targets
run follow command to install adafruit-nrfutil from PyPi
$ pip3 install --user adafruit-nrfutil
make flash and make sd will not work with DFU targets. Hence, dfu-gen and dfu-flash must be used instead.
- dfu-gen: Generates a Firmware zip to be used by the DFU flash application.
- dfu-flash: Triggers the DFU flash application to upload the firmware from the generated Firmware zip file.
When enabled you have different options to test it:
- NUS Console for Linux (recommended)
- WebBluetooth REPL (experimental)