djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
56a22ddc8b
circuitpython/ports/stm32/mpconfigport.h
Jim Mussared a1fbb1980c extmod/modtimeq: Remove timeq module. 
This is a MicroPython-specific module that existed to support the old
version of uasyncio.  It's undocumented and not enabled on all ports and
takes up code size unnecessarily.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-08 17:54:28 +10:00

326 lines
11 KiB
C
Raw Blame History

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2013-2017 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Options to control how MicroPython is built for this port,
// overriding defaults in py/mpconfig.h.
// board specific definitions
#include "mpconfigboard.h"
#include "mpconfigboard_common.h"
#ifndef MICROPY_CONFIG_ROM_LEVEL
#define MICROPY_CONFIG_ROM_LEVEL (MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES)
#endif
// memory allocation policies
#ifndef MICROPY_GC_STACK_ENTRY_TYPE
#if MICROPY_HW_SDRAM_SIZE
#define MICROPY_GC_STACK_ENTRY_TYPE uint32_t
#else
#define MICROPY_GC_STACK_ENTRY_TYPE uint16_t
#endif
#endif
#define MICROPY_ALLOC_PATH_MAX (128)
// optimisations
#ifndef MICROPY_OPT_COMPUTED_GOTO
#define MICROPY_OPT_COMPUTED_GOTO (1)
#endif
// Don't enable lookup cache on M0 (low RAM)
#ifndef MICROPY_OPT_MAP_LOOKUP_CACHE
#define MICROPY_OPT_MAP_LOOKUP_CACHE (__CORTEX_M > 0)
#endif
// emitters
#define MICROPY_PERSISTENT_CODE_LOAD (1)
#ifndef MICROPY_EMIT_THUMB
#define MICROPY_EMIT_THUMB (1)
#endif
#ifndef MICROPY_EMIT_INLINE_THUMB
#define MICROPY_EMIT_INLINE_THUMB (1)
#endif
// Python internal features
#define MICROPY_TRACKED_ALLOC (MICROPY_SSL_MBEDTLS || MICROPY_BLUETOOTH_BTSTACK)
#define MICROPY_READER_VFS (1)
#define MICROPY_ENABLE_GC (1)
#define MICROPY_ENABLE_EMERGENCY_EXCEPTION_BUF (1)
#define MICROPY_EMERGENCY_EXCEPTION_BUF_SIZE (0)
#define MICROPY_REPL_INFO (1)
#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ)
#ifndef MICROPY_FLOAT_IMPL // can be configured by each board via mpconfigboard.mk
#define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT)
#endif
#define MICROPY_USE_INTERNAL_ERRNO (1)
#define MICROPY_SCHEDULER_STATIC_NODES (1)
#define MICROPY_SCHEDULER_DEPTH (8)
#define MICROPY_VFS (1)
// control over Python builtins
#ifndef MICROPY_PY_BUILTINS_HELP_TEXT
#define MICROPY_PY_BUILTINS_HELP_TEXT stm32_help_text
#endif
#ifndef MICROPY_PY_SYS_PLATFORM // let boards override it if they want
#define MICROPY_PY_SYS_PLATFORM "pyboard"
#endif
#ifndef MICROPY_PY_THREAD
#define MICROPY_PY_THREAD (0)
#endif
// extended modules
#define MICROPY_PY_SSL_FINALISER (MICROPY_PY_SSL)
#define MICROPY_PY_HASHLIB_MD5 (MICROPY_PY_SSL)
#define MICROPY_PY_HASHLIB_SHA1 (MICROPY_PY_SSL)
#define MICROPY_PY_CRYPTOLIB (MICROPY_PY_SSL)
#define MICROPY_PY_OS_INCLUDEFILE "ports/stm32/modos.c"
#define MICROPY_PY_OS_DUPTERM (3)
#define MICROPY_PY_OS_DUPTERM_BUILTIN_STREAM (1)
#define MICROPY_PY_OS_DUPTERM_STREAM_DETACHED_ATTACHED (1)
#define MICROPY_PY_OS_SEP (1)
#define MICROPY_PY_OS_SYNC (1)
#define MICROPY_PY_OS_UNAME (1)
#define MICROPY_PY_OS_URANDOM (MICROPY_HW_ENABLE_RNG)
#define MICROPY_PY_RANDOM_SEED_INIT_FUNC (rng_get())
#define MICROPY_PY_TIME_GMTIME_LOCALTIME_MKTIME (1)
#define MICROPY_PY_TIME_TIME_TIME_NS (1)
#define MICROPY_PY_TIME_INCLUDEFILE "ports/stm32/modtime.c"
#define MICROPY_PY_LWIP_SOCK_RAW (MICROPY_PY_LWIP)
#ifndef MICROPY_PY_MACHINE
#define MICROPY_PY_MACHINE (1)
#ifndef MICROPY_PY_MACHINE_BITSTREAM
#define MICROPY_PY_MACHINE_BITSTREAM (1)
#endif
#define MICROPY_PY_MACHINE_PULSE (1)
#define MICROPY_PY_MACHINE_PIN_MAKE_NEW mp_pin_make_new
#define MICROPY_PY_MACHINE_I2C (1)
#define MICROPY_PY_MACHINE_SOFTI2C (1)
#define MICROPY_PY_MACHINE_SPI (1)
#define MICROPY_PY_MACHINE_SPI_MSB (SPI_FIRSTBIT_MSB)
#define MICROPY_PY_MACHINE_SPI_LSB (SPI_FIRSTBIT_LSB)
#define MICROPY_PY_MACHINE_SOFTSPI (1)
#define MICROPY_PY_MACHINE_TIMER (1)
#define MICROPY_SOFT_TIMER_TICKS_MS uwTick
#endif
#define MICROPY_HW_SOFTSPI_MIN_DELAY (0)
#define MICROPY_HW_SOFTSPI_MAX_BAUDRATE (HAL_RCC_GetSysClockFreq() / 48)
#define MICROPY_PY_WEBSOCKET (MICROPY_PY_LWIP)
#define MICROPY_PY_WEBREPL (MICROPY_PY_LWIP)
#ifndef MICROPY_PY_SOCKET
#define MICROPY_PY_SOCKET (1)
#endif
#ifndef MICROPY_PY_NETWORK
#define MICROPY_PY_NETWORK (1)
#endif
#ifndef MICROPY_PY_ONEWIRE
#define MICROPY_PY_ONEWIRE (1)
#endif
#ifndef MICROPY_PY_PLATFORM
#define MICROPY_PY_PLATFORM (1)
#endif
// fatfs configuration used in ffconf.h
#define MICROPY_FATFS_ENABLE_LFN (1)
#define MICROPY_FATFS_LFN_CODE_PAGE 437 /* 1=SFN/ANSI 437=LFN/U.S.(OEM) */
#define MICROPY_FATFS_USE_LABEL (1)
#define MICROPY_FATFS_RPATH (2)
#define MICROPY_FATFS_MULTI_PARTITION (1)
#if MICROPY_PY_PYB
extern const struct _mp_obj_module_t pyb_module;
#define PYB_BUILTIN_MODULE_CONSTANTS \
{ MP_ROM_QSTR(MP_QSTR_pyb), MP_ROM_PTR(&pyb_module) },
#else
#define PYB_BUILTIN_MODULE_CONSTANTS
#endif
#if MICROPY_PY_STM
extern const struct _mp_obj_module_t stm_module;
#define STM_BUILTIN_MODULE_CONSTANTS \
{ MP_ROM_QSTR(MP_QSTR_stm), MP_ROM_PTR(&stm_module) },
#else
#define STM_BUILTIN_MODULE_CONSTANTS
#endif
#if MICROPY_PY_MACHINE
#define MACHINE_BUILTIN_MODULE_CONSTANTS \
{ MP_ROM_QSTR(MP_QSTR_machine), MP_ROM_PTR(&mp_module_machine) }, \
{ MP_ROM_QSTR(MP_QSTR_machine), MP_ROM_PTR(&mp_module_machine) },
#else
#define MACHINE_BUILTIN_MODULE_CONSTANTS
#endif
#if defined(MICROPY_HW_ETH_MDC)
extern const struct _mp_obj_type_t network_lan_type;
#define MICROPY_HW_NIC_ETH { MP_ROM_QSTR(MP_QSTR_LAN), MP_ROM_PTR(&network_lan_type) },
#else
#define MICROPY_HW_NIC_ETH
#endif
#if MICROPY_PY_NETWORK_CYW43
extern const struct _mp_obj_type_t mp_network_cyw43_type;
#define MICROPY_HW_NIC_CYW43 { MP_ROM_QSTR(MP_QSTR_WLAN), MP_ROM_PTR(&mp_network_cyw43_type) },
#else
#define MICROPY_HW_NIC_CYW43
#endif
#if MICROPY_PY_NETWORK_WIZNET5K
extern const struct _mp_obj_type_t mod_network_nic_type_wiznet5k;
#define MICROPY_HW_NIC_WIZNET5K { MP_ROM_QSTR(MP_QSTR_WIZNET5K), MP_ROM_PTR(&mod_network_nic_type_wiznet5k) },
#else
#define MICROPY_HW_NIC_WIZNET5K
#endif
// extra constants
#define MICROPY_PORT_CONSTANTS \
MACHINE_BUILTIN_MODULE_CONSTANTS \
PYB_BUILTIN_MODULE_CONSTANTS \
STM_BUILTIN_MODULE_CONSTANTS \
#ifndef MICROPY_BOARD_NETWORK_INTERFACES
#define MICROPY_BOARD_NETWORK_INTERFACES
#endif
#define MICROPY_PORT_NETWORK_INTERFACES \
MICROPY_HW_NIC_ETH \
MICROPY_HW_NIC_CYW43 \
MICROPY_HW_NIC_WIZNET5K \
MICROPY_BOARD_NETWORK_INTERFACES \
#define MP_STATE_PORT MP_STATE_VM
// type definitions for the specific machine
#define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((uint32_t)(p) | 1))
#define MP_SSIZE_MAX (0x7fffffff)
// Assume that if we already defined the obj repr then we also defined these items
#ifndef MICROPY_OBJ_REPR
#define UINT_FMT "%u"
#define INT_FMT "%d"
typedef int mp_int_t; // must be pointer size
typedef unsigned int mp_uint_t; // must be pointer size
#endif
typedef long mp_off_t;
// We have inlined IRQ functions for efficiency (they are generally
// 1 machine instruction).
//
// Note on IRQ state: you should not need to know the specific
// value of the state variable, but rather just pass the return
// value from disable_irq back to enable_irq. If you really need
// to know the machine-specific values, see irq.h.
static inline void enable_irq(mp_uint_t state) {
__set_PRIMASK(state);
}
static inline mp_uint_t disable_irq(void) {
mp_uint_t state = __get_PRIMASK();
__disable_irq();
return state;
}
#define MICROPY_BEGIN_ATOMIC_SECTION() disable_irq()
#define MICROPY_END_ATOMIC_SECTION(state) enable_irq(state)
#if MICROPY_PY_THREAD
#define MICROPY_EVENT_POLL_HOOK \
do { \
extern void mp_handle_pending(bool); \
mp_handle_pending(true); \
if (pyb_thread_enabled) { \
MP_THREAD_GIL_EXIT(); \
pyb_thread_yield(); \
MP_THREAD_GIL_ENTER(); \
} else { \
__WFI(); \
} \
} while (0);
#define MICROPY_THREAD_YIELD() pyb_thread_yield()
#else
#define MICROPY_EVENT_POLL_HOOK \
do { \
extern void mp_handle_pending(bool); \
mp_handle_pending(true); \
__WFI(); \
} while (0);
#define MICROPY_THREAD_YIELD()
#endif
// For regular code that wants to prevent "background tasks" from running.
// These background tasks (LWIP, Bluetooth) run in PENDSV context.
#define MICROPY_PY_PENDSV_ENTER uint32_t atomic_state = raise_irq_pri(IRQ_PRI_PENDSV);
#define MICROPY_PY_PENDSV_REENTER atomic_state = raise_irq_pri(IRQ_PRI_PENDSV);
#define MICROPY_PY_PENDSV_EXIT restore_irq_pri(atomic_state);
// Prevent the "LWIP task" from running.
#define MICROPY_PY_LWIP_ENTER MICROPY_PY_PENDSV_ENTER
#define MICROPY_PY_LWIP_REENTER MICROPY_PY_PENDSV_REENTER
#define MICROPY_PY_LWIP_EXIT MICROPY_PY_PENDSV_EXIT
#ifndef MICROPY_PY_NETWORK_HOSTNAME_DEFAULT
#define MICROPY_PY_NETWORK_HOSTNAME_DEFAULT "mpy-stm32"
#endif
#if MICROPY_PY_BLUETOOTH_USE_SYNC_EVENTS
// Bluetooth code only runs in the scheduler, no locking/mutex required.
#define MICROPY_PY_BLUETOOTH_ENTER uint32_t atomic_state = 0;
#define MICROPY_PY_BLUETOOTH_EXIT (void)atomic_state;
#else
// When async events are enabled, need to prevent PendSV execution racing with
// scheduler execution.
#define MICROPY_PY_BLUETOOTH_ENTER MICROPY_PY_PENDSV_ENTER
#define MICROPY_PY_BLUETOOTH_EXIT MICROPY_PY_PENDSV_EXIT
#endif
#if defined(STM32WB)
#define MICROPY_PY_BLUETOOTH_HCI_READ_MODE MICROPY_PY_BLUETOOTH_HCI_READ_MODE_PACKET
#else
#define MICROPY_PY_BLUETOOTH_HCI_READ_MODE MICROPY_PY_BLUETOOTH_HCI_READ_MODE_BYTE
#endif
#ifndef MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE
#define MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE (1)
#endif
#ifndef MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS
#define MICROPY_PY_BLUETOOTH_ENABLE_L2CAP_CHANNELS (MICROPY_BLUETOOTH_NIMBLE)
#endif
// We need an implementation of the log2 function which is not a macro
#define MP_NEED_LOG2 (1)
// We need to provide a declaration/definition of alloca()
#include <alloca.h>
// Needed for MICROPY_PY_RANDOM_SEED_INIT_FUNC.
uint32_t rng_get(void);
Reference in New Issue View Git Blame Copy Permalink