djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
56845b6aff
circuitpython/stmhal/hal/f7/inc/stm32f7xx_hal_pwr_ex.h
Dave Hylands 7c934ae501 stmhal: Add hal and cmsis files from STM32Cube_FW_F7_V1.1.0. 
All files were converted to linux line endings.
All trailing whitespace was removed using:
for f in f7/inc/* f7/src/*; do sed --in-place 's/[[:space:]]\+$//' $f; done
All non-ascii chars in comments were replaced with ascii equivalents or
removed.
2015-07-30 00:38:18 +01:00

281 lines
12 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32f7xx_hal_pwr_ex.h
* @author MCD Application Team
* @version V1.0.1
* @date 25-June-2015
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_HAL_PWR_EX_H
#define __STM32F7xx_HAL_PWR_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx_hal_def.h"
/** @addtogroup STM32F7xx_HAL_Driver
* @{
*/
/** @addtogroup PWREx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
* @{
*/
/** @defgroup PWREx_WakeUp_Pins PWREx Wake Up Pins
* @{
*/
#define PWR_WAKEUP_PIN1 PWR_CSR2_EWUP1
#define PWR_WAKEUP_PIN2 PWR_CSR2_EWUP2
#define PWR_WAKEUP_PIN3 PWR_CSR2_EWUP3
#define PWR_WAKEUP_PIN4 PWR_CSR2_EWUP4
#define PWR_WAKEUP_PIN5 PWR_CSR2_EWUP5
#define PWR_WAKEUP_PIN6 PWR_CSR2_EWUP6
#define PWR_WAKEUP_PIN1_HIGH PWR_CSR2_EWUP1
#define PWR_WAKEUP_PIN2_HIGH PWR_CSR2_EWUP2
#define PWR_WAKEUP_PIN3_HIGH PWR_CSR2_EWUP3
#define PWR_WAKEUP_PIN4_HIGH PWR_CSR2_EWUP4
#define PWR_WAKEUP_PIN5_HIGH PWR_CSR2_EWUP5
#define PWR_WAKEUP_PIN6_HIGH PWR_CSR2_EWUP6
#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR2_WUPP1<<6) | PWR_CSR2_EWUP1)
#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR2_WUPP2<<6) | PWR_CSR2_EWUP2)
#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR2_WUPP3<<6) | PWR_CSR2_EWUP3)
#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR2_WUPP4<<6) | PWR_CSR2_EWUP4)
#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR2_WUPP5<<6) | PWR_CSR2_EWUP5)
#define PWR_WAKEUP_PIN6_LOW (uint32_t)((PWR_CR2_WUPP6<<6) | PWR_CSR2_EWUP6)
/**
* @}
*/
/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode
* @{
*/
#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR1_MRUDS
#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR1_LPDS | PWR_CR1_LPUDS))
/**
* @}
*/
/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag
* @{
*/
#define PWR_FLAG_ODRDY PWR_CSR1_ODRDY
#define PWR_FLAG_ODSWRDY PWR_CSR1_ODSWRDY
#define PWR_FLAG_UDRDY PWR_CSR1_UDSWRDY
/**
* @}
*/
/** @defgroup PWREx_Wakeup_Pins_Flag PWREx Wake Up Pin Flags
* @{
*/
#define PWR_WAKEUP_PIN_FLAG1 PWR_CSR2_WUPF1
#define PWR_WAKEUP_PIN_FLAG2 PWR_CSR2_WUPF2
#define PWR_WAKEUP_PIN_FLAG3 PWR_CSR2_WUPF3
#define PWR_WAKEUP_PIN_FLAG4 PWR_CSR2_WUPF4
#define PWR_WAKEUP_PIN_FLAG5 PWR_CSR2_WUPF5
#define PWR_WAKEUP_PIN_FLAG6 PWR_CSR2_WUPF6
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup PWREx_Exported_Macro PWREx Exported Macro
* @{
*/
/** @brief Macros to enable or disable the Over drive mode.
*/
#define __HAL_PWR_OVERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODEN)
#define __HAL_PWR_OVERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODEN))
/** @brief Macros to enable or disable the Over drive switching.
*/
#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_ODSWEN)
#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_ODSWEN))
/** @brief Macros to enable or disable the Under drive mode.
* @note This mode is enabled only with STOP low power mode.
* In this mode, the 1.2V domain is preserved in reduced leakage mode. This
* mode is only available when the main regulator or the low power regulator
* is in low voltage mode.
* @note If the Under-drive mode was enabled, it is automatically disabled after
* exiting Stop mode.
* When the voltage regulator operates in Under-drive mode, an additional
* startup delay is induced when waking up from Stop mode.
*/
#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR1 |= (uint32_t)PWR_CR1_UDEN)
#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR1 &= (uint32_t)(~PWR_CR1_UDEN))
/** @brief Check PWR flag is set or not.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
* is ready
* @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
* switching is ready
* @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
* is enabled in Stop mode
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR1 & (__FLAG__)) == (__FLAG__))
/** @brief Clear the Under-Drive Ready flag.
*/
#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR1 |= PWR_FLAG_UDRDY)
/** @brief Check Wake Up flag is set or not.
* @param __WUFLAG__: specifies the Wake Up flag to check.
* This parameter can be one of the following values:
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
*/
#define __HAL_PWR_GET_WAKEUP_FLAG(__WUFLAG__) (PWR->CSR2 & (__WUFLAG__))
/** @brief Clear the WakeUp pins flags.
* @param __WUFLAG__: specifies the Wake Up pin flag to clear.
* This parameter can be one of the following values:
* @arg PWR_WAKEUP_PIN_FLAG1: Wakeup Pin Flag for PA0
* @arg PWR_WAKEUP_PIN_FLAG2: Wakeup Pin Flag for PA2
* @arg PWR_WAKEUP_PIN_FLAG3: Wakeup Pin Flag for PC1
* @arg PWR_WAKEUP_PIN_FLAG4: Wakeup Pin Flag for PC13
* @arg PWR_WAKEUP_PIN_FLAG5: Wakeup Pin Flag for PI8
* @arg PWR_WAKEUP_PIN_FLAG6: Wakeup Pin Flag for PI11
*/
#define __HAL_PWR_CLEAR_WAKEUP_FLAG(__WUFLAG__) (PWR->CR2 |= (__WUFLAG__))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
* @{
*/
/** @addtogroup PWREx_Exported_Functions_Group1
* @{
*/
uint32_t HAL_PWREx_GetVoltageRange(void);
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
void HAL_PWREx_EnableFlashPowerDown(void);
void HAL_PWREx_DisableFlashPowerDown(void);
HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void);
HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void);
HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup PWREx_Private_Macros PWREx Private Macros
* @{
*/
/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters
* @{
*/
#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
#define IS_PWR_WAKEUP_PIN(__PIN__) (((__PIN__) == PWR_WAKEUP_PIN1) || \
((__PIN__) == PWR_WAKEUP_PIN2) || \
((__PIN__) == PWR_WAKEUP_PIN3) || \
((__PIN__) == PWR_WAKEUP_PIN4) || \
((__PIN__) == PWR_WAKEUP_PIN5) || \
((__PIN__) == PWR_WAKEUP_PIN6) || \
((__PIN__) == PWR_WAKEUP_PIN1_HIGH) || \
((__PIN__) == PWR_WAKEUP_PIN2_HIGH) || \
((__PIN__) == PWR_WAKEUP_PIN3_HIGH) || \
((__PIN__) == PWR_WAKEUP_PIN4_HIGH) || \
((__PIN__) == PWR_WAKEUP_PIN5_HIGH) || \
((__PIN__) == PWR_WAKEUP_PIN6_HIGH) || \
((__PIN__) == PWR_WAKEUP_PIN1_LOW) || \
((__PIN__) == PWR_WAKEUP_PIN2_LOW) || \
((__PIN__) == PWR_WAKEUP_PIN3_LOW) || \
((__PIN__) == PWR_WAKEUP_PIN4_LOW) || \
((__PIN__) == PWR_WAKEUP_PIN5_LOW) || \
((__PIN__) == PWR_WAKEUP_PIN6_LOW))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_HAL_PWR_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink