0621eca05e
Only those files which are needed by the stmhal port are added. Also includes a dummy file (stm32f2xx_hal_pcd_ex.c) to keep the build system the same for f4 and f2 MCU series.
234 lines
11 KiB
C
234 lines
11 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f2xx_hal_tim_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 25-March-2014
|
|
* @brief Header file of TIM HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F2xx_HAL_TIM_EX_H
|
|
#define __STM32F2xx_HAL_TIM_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f2xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F2xx_HAL
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup TIMEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief TIM Hall sensor Configuration Structure definition
|
|
*/
|
|
|
|
typedef struct
|
|
{
|
|
|
|
uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
|
|
This parameter can be a value of @ref TIM_Input_Capture_Polarity */
|
|
|
|
uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
|
|
This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
|
|
|
|
uint32_t IC1Filter; /*!< Specifies the input capture filter.
|
|
This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
|
|
uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
|
|
This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
|
|
} TIM_HallSensor_InitTypeDef;
|
|
|
|
/**
|
|
* @brief TIM Master configuration Structure definition
|
|
*/
|
|
typedef struct {
|
|
uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
|
|
This parameter can be a value of @ref TIM_Master_Mode_Selection */
|
|
uint32_t MasterSlaveMode; /*!< Master/slave mode selection
|
|
This parameter can be a value of @ref TIM_Master_Slave_Mode */
|
|
}TIM_MasterConfigTypeDef;
|
|
|
|
/**
|
|
* @brief TIM Break and Dead time configuration Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t OffStateRunMode; /*!< TIM off state in run mode
|
|
This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
|
|
uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
|
|
This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
|
|
uint32_t LockLevel; /*!< TIM Lock level
|
|
This parameter can be a value of @ref TIM_Lock_level */
|
|
uint32_t DeadTime; /*!< TIM dead Time
|
|
This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
|
|
uint32_t BreakState; /*!< TIM Break State
|
|
This parameter can be a value of @ref TIM_Break_Input_enable_disable */
|
|
uint32_t BreakPolarity; /*!< TIM Break input polarity
|
|
This parameter can be a value of @ref TIM_Break_Polarity */
|
|
uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
|
|
This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
|
|
}TIM_BreakDeadTimeConfigTypeDef;
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup TIMEx_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup TIMEx_Remap
|
|
* @{
|
|
*/
|
|
|
|
#define TIM_TIM2_TIM8_TRGO (0x00000000)
|
|
#define TIM_TIM2_ETH_PTP (0x00000400)
|
|
#define TIM_TIM2_USBFS_SOF (0x00000800)
|
|
#define TIM_TIM2_USBHS_SOF (0x00000C00)
|
|
#define TIM_TIM5_GPIO (0x00000000)
|
|
#define TIM_TIM5_LSI (0x00000040)
|
|
#define TIM_TIM5_LSE (0x00000080)
|
|
#define TIM_TIM5_RTC (0x000000C0)
|
|
#define TIM_TIM11_GPIO (0x00000000)
|
|
#define TIM_TIM11_HSE (0x00000002)
|
|
|
|
#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
|
|
((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
|
|
((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
|
|
((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
|
|
((TIM_REMAP) == TIM_TIM5_GPIO)||\
|
|
((TIM_REMAP) == TIM_TIM5_LSI)||\
|
|
((TIM_REMAP) == TIM_TIM5_LSE)||\
|
|
((TIM_REMAP) == TIM_TIM5_RTC)||\
|
|
((TIM_REMAP) == TIM_TIM11_GPIO)||\
|
|
((TIM_REMAP) == TIM_TIM11_HSE))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/* Timer Hall Sensor functions **********************************************/
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
|
|
|
|
void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
|
|
void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
|
|
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
|
|
|
|
/* Timer Complementary Output Compare functions *****************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
|
|
/* Timer Complementary PWM functions ****************************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
/* Non-Blocking mode: DMA */
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
|
|
HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
|
|
|
|
/* Timer Complementary One Pulse functions **********************************/
|
|
/* Blocking mode: Polling */
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
|
|
|
|
/* Non-Blocking mode: Interrupt */
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
|
|
HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
|
|
|
|
/* Extnsion Control functions ************************************************/
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
|
|
HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
|
|
HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
|
|
|
|
/* Extension Callback *********************************************************/
|
|
void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
|
|
void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
|
|
void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
|
|
|
|
/* Extension Peripheral State functions **************************************/
|
|
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F2xx_HAL_TIM_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|