0621eca05e
Only those files which are needed by the stmhal port are added. Also includes a dummy file (stm32f2xx_hal_pcd_ex.c) to keep the build system the same for f4 and f2 MCU series.
489 lines
21 KiB
C
489 lines
21 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f2xx_hal_rtc_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.0.1
|
|
* @date 25-March-2014
|
|
* @brief Header file of RTC HAL Extension module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F2xx_HAL_RTC_EX_H
|
|
#define __STM32F2xx_HAL_RTC_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f2xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F2xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup RTCEx
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief RTC Tamper structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t Tamper; /*!< Specifies the Tamper Pin.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
|
|
|
|
uint32_t PinSelection; /*!< Specifies the Tamper Pin.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
|
|
|
|
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
|
|
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
|
|
}RTC_TamperTypeDef;
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup RTCEx_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Backup_Registers_Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_BKP_DR0 ((uint32_t)0x00000000)
|
|
#define RTC_BKP_DR1 ((uint32_t)0x00000001)
|
|
#define RTC_BKP_DR2 ((uint32_t)0x00000002)
|
|
#define RTC_BKP_DR3 ((uint32_t)0x00000003)
|
|
#define RTC_BKP_DR4 ((uint32_t)0x00000004)
|
|
#define RTC_BKP_DR5 ((uint32_t)0x00000005)
|
|
#define RTC_BKP_DR6 ((uint32_t)0x00000006)
|
|
#define RTC_BKP_DR7 ((uint32_t)0x00000007)
|
|
#define RTC_BKP_DR8 ((uint32_t)0x00000008)
|
|
#define RTC_BKP_DR9 ((uint32_t)0x00000009)
|
|
#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
|
|
#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
|
|
#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
|
|
#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
|
|
#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
|
|
#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
|
|
#define RTC_BKP_DR16 ((uint32_t)0x00000010)
|
|
#define RTC_BKP_DR17 ((uint32_t)0x00000011)
|
|
#define RTC_BKP_DR18 ((uint32_t)0x00000012)
|
|
#define RTC_BKP_DR19 ((uint32_t)0x00000013)
|
|
|
|
#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
|
|
((BKP) == RTC_BKP_DR1) || \
|
|
((BKP) == RTC_BKP_DR2) || \
|
|
((BKP) == RTC_BKP_DR3) || \
|
|
((BKP) == RTC_BKP_DR4) || \
|
|
((BKP) == RTC_BKP_DR5) || \
|
|
((BKP) == RTC_BKP_DR6) || \
|
|
((BKP) == RTC_BKP_DR7) || \
|
|
((BKP) == RTC_BKP_DR8) || \
|
|
((BKP) == RTC_BKP_DR9) || \
|
|
((BKP) == RTC_BKP_DR10) || \
|
|
((BKP) == RTC_BKP_DR11) || \
|
|
((BKP) == RTC_BKP_DR12) || \
|
|
((BKP) == RTC_BKP_DR13) || \
|
|
((BKP) == RTC_BKP_DR14) || \
|
|
((BKP) == RTC_BKP_DR15) || \
|
|
((BKP) == RTC_BKP_DR16) || \
|
|
((BKP) == RTC_BKP_DR17) || \
|
|
((BKP) == RTC_BKP_DR18) || \
|
|
((BKP) == RTC_BKP_DR19))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Time_Stamp_Edges_definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
|
|
#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
|
|
|
|
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
|
|
((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Pins_Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
|
|
|
|
#define IS_TAMPER(TAMPER) ((TAMPER) == RTC_TAMPER_1)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Pins_Selection
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERPIN_PC13 ((uint32_t)0x00000000)
|
|
#define RTC_TAMPERPIN_PI8 ((uint32_t)0x00010000)
|
|
|
|
#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_PC13) || \
|
|
((PIN) == RTC_TAMPERPIN_PI8))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_TimeStamp_Pin_Selection
|
|
* @{
|
|
*/
|
|
#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
|
|
#define RTC_TIMESTAMPPIN_PI8 ((uint32_t)0x00020000)
|
|
|
|
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13) || \
|
|
((PIN) == RTC_TIMESTAMPPIN_PI8))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Tamper_Trigger_Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
|
|
#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
|
|
#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
|
|
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE))
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Wakeup_Timer_Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
|
|
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
|
|
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
|
|
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
|
|
|
|
#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
|
|
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
|
|
|
|
#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup RTCEx_Digital_Calibration_Definitions
|
|
* @{
|
|
*/
|
|
#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
|
|
#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
|
|
|
|
#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
|
|
((SIGN) == RTC_CALIBSIGN_NEGATIVE))
|
|
|
|
#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Enable the RTC WakeUp Timer peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
|
|
|
|
/**
|
|
* @brief Enable the RTC TimeStamp peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
|
|
|
|
/**
|
|
* @brief Disable the RTC WakeUp Timer peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
|
|
|
|
/**
|
|
* @brief Disable the RTC TimeStamp peripheral.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
|
|
|
|
/**
|
|
* @brief Enable the Coarse calibration process.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
|
|
|
|
/**
|
|
* @brief Disable the Coarse calibration process.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
|
|
|
|
/**
|
|
* @brief Enable the RTC calibration output.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
|
|
|
|
/**
|
|
* @brief Disable the calibration output.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
|
|
|
|
/**
|
|
* @brief Enable the clock reference detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
|
|
|
|
/**
|
|
* @brief Disable the clock reference detection.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
|
|
|
|
/**
|
|
* @brief Enable the RTC TimeStamp interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Enable the RTC WakeUpTimer interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC TimeStamp interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Disable the RTC WakeUpTimer interrupt.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TAMP1
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_WUT: WakeUpTimer A interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_IT_TS: TimeStamp interrupt
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC TimeStamp's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TSF
|
|
* @arg RTC_FLAG_TSOVF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC WakeUpTimer's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_WUTF
|
|
* @arg RTC_FLAG_WUTWF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Get the selected RTC Tamper's flag status.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TAMP1F
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
|
|
|
|
/**
|
|
* @brief Clear the RTC Time Stamp's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TSF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/**
|
|
* @brief Clear the RTC Tamper's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_TAMP1F
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/**
|
|
* @brief Clear the RTC Wake Up timer's pending flags.
|
|
* @param __HANDLE__: specifies the RTC handle.
|
|
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
|
|
* This parameter can be:
|
|
* @arg RTC_FLAG_WUTF
|
|
* @retval None
|
|
*/
|
|
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/* RTC TimeStamp and Tamper functions *****************************************/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
|
|
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
|
|
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
|
|
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
|
|
/* RTC Wake-up functions ******************************************************/
|
|
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
|
|
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
|
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
|
|
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
|
|
/* Extension Control functions ************************************************/
|
|
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
|
|
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
|
|
|
|
HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
|
|
|
|
/* Extension RTC features functions *******************************************/
|
|
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
|
|
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F2xx_HAL_RTC_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|