309 lines
12 KiB
C
309 lines
12 KiB
C
/* Copyright (c) 2012 ARM LIMITED
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* * Neither the name of ARM nor the names of its contributors may be used to
|
|
* endorse or promote products derived from this software without specific
|
|
* prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "nrf.h"
|
|
#include "system_nrf52.h"
|
|
|
|
/*lint ++flb "Enter library region" */
|
|
|
|
#define __SYSTEM_CLOCK_64M (64000000UL)
|
|
|
|
static bool errata_16(void);
|
|
static bool errata_31(void);
|
|
static bool errata_32(void);
|
|
static bool errata_36(void);
|
|
static bool errata_37(void);
|
|
static bool errata_57(void);
|
|
static bool errata_66(void);
|
|
static bool errata_108(void);
|
|
|
|
|
|
#if defined ( __CC_ARM )
|
|
uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK_64M;
|
|
#elif defined ( __ICCARM__ )
|
|
__root uint32_t SystemCoreClock = __SYSTEM_CLOCK_64M;
|
|
#elif defined ( __GNUC__ )
|
|
uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK_64M;
|
|
#endif
|
|
|
|
void SystemCoreClockUpdate(void)
|
|
{
|
|
SystemCoreClock = __SYSTEM_CLOCK_64M;
|
|
}
|
|
|
|
void SystemInit(void)
|
|
{
|
|
/* Workaround for Errata 16 "System: RAM may be corrupt on wakeup from CPU IDLE" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_16()){
|
|
*(volatile uint32_t *)0x4007C074 = 3131961357ul;
|
|
}
|
|
|
|
/* Workaround for Errata 31 "CLOCK: Calibration values are not correctly loaded from FICR at reset" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_31()){
|
|
*(volatile uint32_t *)0x4000053C = ((*(volatile uint32_t *)0x10000244) & 0x0000E000) >> 13;
|
|
}
|
|
|
|
/* Workaround for Errata 32 "DIF: Debug session automatically enables TracePort pins" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_32()){
|
|
CoreDebug->DEMCR &= ~CoreDebug_DEMCR_TRCENA_Msk;
|
|
}
|
|
|
|
/* Workaround for Errata 36 "CLOCK: Some registers are not reset when expected" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_36()){
|
|
NRF_CLOCK->EVENTS_DONE = 0;
|
|
NRF_CLOCK->EVENTS_CTTO = 0;
|
|
NRF_CLOCK->CTIV = 0;
|
|
}
|
|
|
|
/* Workaround for Errata 37 "RADIO: Encryption engine is slow by default" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_37()){
|
|
*(volatile uint32_t *)0x400005A0 = 0x3;
|
|
}
|
|
|
|
/* Workaround for Errata 57 "NFCT: NFC Modulation amplitude" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_57()){
|
|
*(volatile uint32_t *)0x40005610 = 0x00000005;
|
|
*(volatile uint32_t *)0x40005688 = 0x00000001;
|
|
*(volatile uint32_t *)0x40005618 = 0x00000000;
|
|
*(volatile uint32_t *)0x40005614 = 0x0000003F;
|
|
}
|
|
|
|
/* Workaround for Errata 66 "TEMP: Linearity specification not met with default settings" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_66()){
|
|
NRF_TEMP->A0 = NRF_FICR->TEMP.A0;
|
|
NRF_TEMP->A1 = NRF_FICR->TEMP.A1;
|
|
NRF_TEMP->A2 = NRF_FICR->TEMP.A2;
|
|
NRF_TEMP->A3 = NRF_FICR->TEMP.A3;
|
|
NRF_TEMP->A4 = NRF_FICR->TEMP.A4;
|
|
NRF_TEMP->A5 = NRF_FICR->TEMP.A5;
|
|
NRF_TEMP->B0 = NRF_FICR->TEMP.B0;
|
|
NRF_TEMP->B1 = NRF_FICR->TEMP.B1;
|
|
NRF_TEMP->B2 = NRF_FICR->TEMP.B2;
|
|
NRF_TEMP->B3 = NRF_FICR->TEMP.B3;
|
|
NRF_TEMP->B4 = NRF_FICR->TEMP.B4;
|
|
NRF_TEMP->B5 = NRF_FICR->TEMP.B5;
|
|
NRF_TEMP->T0 = NRF_FICR->TEMP.T0;
|
|
NRF_TEMP->T1 = NRF_FICR->TEMP.T1;
|
|
NRF_TEMP->T2 = NRF_FICR->TEMP.T2;
|
|
NRF_TEMP->T3 = NRF_FICR->TEMP.T3;
|
|
NRF_TEMP->T4 = NRF_FICR->TEMP.T4;
|
|
}
|
|
|
|
/* Workaround for Errata 108 "RAM: RAM content cannot be trusted upon waking up from System ON Idle or System OFF mode" found at the Errata document
|
|
for your device located at https://infocenter.nordicsemi.com/ */
|
|
if (errata_108()){
|
|
*(volatile uint32_t *)0x40000EE4 = *(volatile uint32_t *)0x10000258 & 0x0000004F;
|
|
}
|
|
|
|
/* Enable the FPU if the compiler used floating point unit instructions. __FPU_USED is a MACRO defined by the
|
|
* compiler. Since the FPU consumes energy, remember to disable FPU use in the compiler if floating point unit
|
|
* operations are not used in your code. */
|
|
#if (__FPU_USED == 1)
|
|
SCB->CPACR |= (3UL << 20) | (3UL << 22);
|
|
__DSB();
|
|
__ISB();
|
|
#endif
|
|
|
|
/* Configure NFCT pins as GPIOs if NFCT is not to be used in your code. If CONFIG_NFCT_PINS_AS_GPIOS is not defined,
|
|
two GPIOs (see Product Specification to see which ones) will be reserved for NFC and will not be available as
|
|
normal GPIOs. */
|
|
#if defined (CONFIG_NFCT_PINS_AS_GPIOS)
|
|
if ((NRF_UICR->NFCPINS & UICR_NFCPINS_PROTECT_Msk) == (UICR_NFCPINS_PROTECT_NFC << UICR_NFCPINS_PROTECT_Pos)){
|
|
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_UICR->NFCPINS &= ~UICR_NFCPINS_PROTECT_Msk;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NVIC_SystemReset();
|
|
}
|
|
#endif
|
|
|
|
/* Configure GPIO pads as pPin Reset pin if Pin Reset capabilities desired. If CONFIG_GPIO_AS_PINRESET is not
|
|
defined, pin reset will not be available. One GPIO (see Product Specification to see which one) will then be
|
|
reserved for PinReset and not available as normal GPIO. */
|
|
#if defined (CONFIG_GPIO_AS_PINRESET)
|
|
if (((NRF_UICR->PSELRESET[0] & UICR_PSELRESET_CONNECT_Msk) != (UICR_PSELRESET_CONNECT_Connected << UICR_PSELRESET_CONNECT_Pos)) ||
|
|
((NRF_UICR->PSELRESET[1] & UICR_PSELRESET_CONNECT_Msk) != (UICR_PSELRESET_CONNECT_Connected << UICR_PSELRESET_CONNECT_Pos))){
|
|
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Wen << NVMC_CONFIG_WEN_Pos;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_UICR->PSELRESET[0] = 21;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_UICR->PSELRESET[1] = 21;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NRF_NVMC->CONFIG = NVMC_CONFIG_WEN_Ren << NVMC_CONFIG_WEN_Pos;
|
|
while (NRF_NVMC->READY == NVMC_READY_READY_Busy){}
|
|
NVIC_SystemReset();
|
|
}
|
|
#endif
|
|
|
|
/* Enable SWO trace functionality. If ENABLE_SWO is not defined, SWO pin will be used as GPIO (see Product
|
|
Specification to see which one). */
|
|
#if defined (ENABLE_SWO)
|
|
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
|
|
NRF_CLOCK->TRACECONFIG |= CLOCK_TRACECONFIG_TRACEMUX_Serial << CLOCK_TRACECONFIG_TRACEMUX_Pos;
|
|
NRF_P0->PIN_CNF[18] = (GPIO_PIN_CNF_DRIVE_H0H1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
|
|
#endif
|
|
|
|
/* Enable Trace functionality. If ENABLE_TRACE is not defined, TRACE pins will be used as GPIOs (see Product
|
|
Specification to see which ones). */
|
|
#if defined (ENABLE_TRACE)
|
|
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
|
|
NRF_CLOCK->TRACECONFIG |= CLOCK_TRACECONFIG_TRACEMUX_Parallel << CLOCK_TRACECONFIG_TRACEMUX_Pos;
|
|
NRF_P0->PIN_CNF[14] = (GPIO_PIN_CNF_DRIVE_H0H1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
|
|
NRF_P0->PIN_CNF[15] = (GPIO_PIN_CNF_DRIVE_H0H1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
|
|
NRF_P0->PIN_CNF[16] = (GPIO_PIN_CNF_DRIVE_H0H1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
|
|
NRF_P0->PIN_CNF[18] = (GPIO_PIN_CNF_DRIVE_H0H1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
|
|
NRF_P0->PIN_CNF[20] = (GPIO_PIN_CNF_DRIVE_H0H1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
|
|
#endif
|
|
|
|
SystemCoreClockUpdate();
|
|
}
|
|
|
|
|
|
static bool errata_16(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool errata_31(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x40){
|
|
return true;
|
|
}
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x50){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool errata_32(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool errata_36(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x40){
|
|
return true;
|
|
}
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x50){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool errata_37(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool errata_57(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool errata_66(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x50){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
|
|
static bool errata_108(void)
|
|
{
|
|
if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x6) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0)){
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30){
|
|
return true;
|
|
}
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x40){
|
|
return true;
|
|
}
|
|
if (((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x50){
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
|
|
/*lint --flb "Leave library region" */
|