812969d615
Replaces "PYB: soft reboot" with "MPY: soft reboot", etc. Having a consistent prefix across ports reduces the difference between ports, which is a general goal. And this change won't break pyboard.py because that tool only looks for "soft reboot".
131 lines
4.3 KiB
ReStructuredText
131 lines
4.3 KiB
ReStructuredText
Getting a MicroPython REPL prompt
|
|
=================================
|
|
|
|
REPL stands for Read Evaluate Print Loop, and is the name given to the
|
|
interactive MicroPython prompt that you can access on the WiPy. Using
|
|
the REPL is by far the easiest way to test out your code and run commands.
|
|
You can use the REPL in addition to writing scripts in ``main.py``.
|
|
|
|
.. _wipy_uart:
|
|
|
|
To use the REPL, you must connect to the WiPy either via :ref:`telnet <wipy_telnet>`,
|
|
or with a USB to serial converter wired to one of the two UARTs on the
|
|
WiPy. To enable REPL duplication on UART0 (the one accessible via the expansion board)
|
|
do::
|
|
|
|
>>> from machine import UART
|
|
>>> import os
|
|
>>> uart = UART(0, 115200)
|
|
>>> os.dupterm(uart)
|
|
|
|
Place this piece of code inside your ``boot.py`` so that it's done automatically after
|
|
reset.
|
|
|
|
Windows
|
|
-------
|
|
|
|
First you need to install the FTDI drivers for the expansion board's USB to serial
|
|
converter. Then you need a terminal software. The best option is to download the
|
|
free program PuTTY: `putty.exe <http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html>`_.
|
|
|
|
**In order to get to the telnet REPL:**
|
|
|
|
Using putty, select ``Telnet`` as connection type, leave the default port (23)
|
|
and enter the IP address of your WiPy (192.168.1.1 when in ``WLAN.AP`` mode),
|
|
then click open.
|
|
|
|
**In order to get to the REPL UART:**
|
|
|
|
Using your serial program you must connect to the COM port that you found in the
|
|
previous step. With PuTTY, click on "Session" in the left-hand panel, then click
|
|
the "Serial" radio button on the right, then enter you COM port (eg COM4) in the
|
|
"Serial Line" box. Finally, click the "Open" button.
|
|
|
|
Mac OS X
|
|
--------
|
|
|
|
Open a terminal and run::
|
|
|
|
$ telnet 192.168.1.1
|
|
|
|
or::
|
|
|
|
$ screen /dev/tty.usbmodem* 115200
|
|
|
|
When you are finished and want to exit ``screen``, type CTRL-A CTRL-\\. If your keyboard does not have a \\-key (i.e. you need an obscure combination for \\ like ALT-SHIFT-7) you can remap the ``quit`` command:
|
|
|
|
- create ``~/.screenrc``
|
|
- add ``bind q quit``
|
|
|
|
This will allow you to quit ``screen`` by hitting CTRL-A Q.
|
|
|
|
Linux
|
|
-----
|
|
|
|
Open a terminal and run::
|
|
|
|
$ telnet 192.168.1.1
|
|
|
|
or::
|
|
|
|
$ screen /dev/ttyUSB0 115200
|
|
|
|
You can also try ``picocom`` or ``minicom`` instead of screen. You may have to
|
|
use ``/dev/ttyUSB01`` or a higher number for ``ttyUSB``. And, you may need to give
|
|
yourself the correct permissions to access this devices (eg group ``uucp`` or ``dialout``,
|
|
or use sudo).
|
|
|
|
Using the REPL prompt
|
|
---------------------
|
|
|
|
Now let's try running some MicroPython code directly on the WiPy.
|
|
|
|
With your serial program open (PuTTY, screen, picocom, etc) you may see a blank
|
|
screen with a flashing cursor. Press Enter and you should be presented with a
|
|
MicroPython prompt, i.e. ``>>>``. Let's make sure it is working with the obligatory test::
|
|
|
|
>>> print("hello WiPy!")
|
|
hello WiPy!
|
|
|
|
In the above, you should not type in the ``>>>`` characters. They are there to
|
|
indicate that you should type the text after it at the prompt. In the end, once
|
|
you have entered the text ``print("hello WiPy!")`` and pressed Enter, the output
|
|
on your screen should look like it does above.
|
|
|
|
If you already know some Python you can now try some basic commands here.
|
|
|
|
If any of this is not working you can try either a hard reset or a soft reset;
|
|
see below.
|
|
|
|
Go ahead and try typing in some other commands. For example::
|
|
|
|
>>> from machine import Pin
|
|
>>> import wipy
|
|
>>> wipy.heartbeat(False) # disable the heartbeat
|
|
>>> led = Pin('GP25', mode=Pin.OUT)
|
|
>>> led(1)
|
|
>>> led(0)
|
|
>>> led.toggle()
|
|
>>> 1 + 2
|
|
3
|
|
>>> 4 // 2
|
|
2
|
|
>>> 20 * 'py'
|
|
'pypypypypypypypypypypypypypypypypypypypy'
|
|
|
|
Resetting the board
|
|
-------------------
|
|
|
|
If something goes wrong, you can reset the board in two ways. The first is to press CTRL-D
|
|
at the MicroPython prompt, which performs a soft reset. You will see a message something like::
|
|
|
|
>>>
|
|
MPY: soft reboot
|
|
MicroPython v1.4.6-146-g1d8b5e5 on 2015-10-21; WiPy with CC3200
|
|
Type "help()" for more information.
|
|
>>>
|
|
|
|
If that isn't working you can perform a hard reset (turn-it-off-and-on-again) by pressing the
|
|
RST switch (the small black button next to the heartbeat LED). During telnet, this will end
|
|
your session, disconnecting whatever program that you used to connect to the WiPy.
|