circuitpython/locale/ru.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"PO-Revision-Date: 2022-04-06 13:37+0000\n"
"Last-Translator: Jeff Epler <jepler@gmail.com>\n"
"Language-Team: none\n"
"Language: ru\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
"%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;\n"
"X-Generator: Weblate 4.12-dev\n"

#: main.c
msgid ""
"\n"
"Code done running.\n"
msgstr ""
"\n"
"Программа закончила выполнение.\n"

#: main.c
msgid ""
"\n"
"Code stopped by auto-reload. Reloading soon.\n"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with the contents of your CIRCUITPY drive at \n"
"https://github.com/adafruit/circuitpython/issues\n"
msgstr ""
"\n"
"Пожалуйста, сообщите о проблеме, приложив содержимое вашего диска CIRCUITPY "
"на\n"
"https://github.com/adafruit/circuitpython/issues\n"

#: py/obj.c
msgid "  File \"%q\""
msgstr "  Файл \"%q\""

#: py/obj.c
msgid "  File \"%q\", line %d"
msgstr "  Файл \"%q\", строка %d"

#: py/builtinhelp.c
msgid " is of type %q\n"
msgstr " имеет тип %q\n"

#: main.c
msgid " not found.\n"
msgstr " не найден.\n"

#: main.c
msgid " output:\n"
msgstr " вывод:\n"

#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c требует int или char"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"
msgstr "%d адресные пины, %d rgb пины и %d плитки указывают высоту %d а не %d"

#: ports/cxd56/common-hal/analogio/AnalogOut.c ports/cxd56/common-hal/rtc/RTC.c
#: ports/espressif/common-hal/rtc/RTC.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
#: ports/mimxrt10xx/common-hal/rtc/RTC.c
#: ports/nrf/common-hal/analogio/AnalogOut.c ports/nrf/common-hal/rtc/RTC.c
#: ports/raspberrypi/common-hal/analogio/AnalogOut.c
#: ports/raspberrypi/common-hal/rtc/RTC.c ports/stm/common-hal/rtc/RTC.c
msgid "%q"
msgstr ""

#: shared-bindings/microcontroller/Pin.c
msgid "%q and %q contain duplicate pins"
msgstr "%q и %q содержат пины-дупликаты"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "%q and %q must be different"
msgstr ""

#: shared-bindings/microcontroller/Pin.c
msgid "%q contains duplicate pins"
msgstr "%q содержит пины-дупликаты"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr "%q сбой: %d"

#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q используется"

#: py/obj.c py/objstr.c py/objstrunicode.c
msgid "%q index out of range"
msgstr "Индекс %q вне диапазона"

#: py/obj.c
msgid "%q indices must be integers, not %s"
msgstr "Индексы %q должны быть целыми числами, а не %s"

#: shared-module/bitbangio/SPI.c
msgid "%q init failed"
msgstr ""

#: py/argcheck.c
msgid "%q length must be %d"
msgstr ""

#: py/argcheck.c
msgid "%q length must be %d-%d"
msgstr "Длинна %q должна быть %d-%d"

#: py/argcheck.c
msgid "%q length must be <= %d"
msgstr ""

#: py/argcheck.c
msgid "%q length must be >= %d"
msgstr ""

#: shared-bindings/busio/I2C.c
msgid "%q length must be >= 1"
msgstr "Длинна %q должна быть >= 1"

#: py/argcheck.c
msgid "%q must be %d"
msgstr ""

#: py/argcheck.c
msgid "%q must be %d-%d"
msgstr "%q должен быть %d-%d"

#: shared-bindings/displayio/Display.c
msgid "%q must be 1 when %q is True"
msgstr ""

#: py/argcheck.c shared-bindings/gifio/GifWriter.c
msgid "%q must be <= %d"
msgstr "%q должен быть <= %d"

#: py/argcheck.c
msgid "%q must be >= %d"
msgstr "%q должен быть >= %d"

#: py/argcheck.c
msgid "%q must be >= 0"
msgstr "%q должен быть >= 0"

#: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c
msgid "%q must be >= 1"
msgstr "%q должен быть >= 1"

#: py/argcheck.c
msgid "%q must be a string"
msgstr "%q должен быть строкой"

#: py/argcheck.c
msgid "%q must be an int"
msgstr ""

#: py/argcheck.c
msgid "%q must be of type %q"
msgstr "%q должен быть типа %q"

#: shared-bindings/digitalio/Pull.c
msgid "%q must be of type %q or None"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
msgid "%q must be power of 2"
msgstr "%q должен быть во 2-й степени"

#: shared-bindings/wifi/Monitor.c
msgid "%q out of bounds"
msgstr "%q за пределом"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
#: shared-bindings/canio/Match.c
msgid "%q out of range"
msgstr "%q вне диапазона"

#: ports/atmel-samd/common-hal/microcontroller/Pin.c
msgid "%q pin invalid"
msgstr "Пин %q не допустим"

#: shared-bindings/usb_hid/Device.c
msgid "%q with a report ID of 0 must be of length 1"
msgstr "%q с идентификатором отчёта 0 должен иметь длину 1"

#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() принимает %d позиционных аргументов, но было передано %d"

#: shared-bindings/usb_hid/Device.c
msgid "%q, %q, and %q must all be the same length"
msgstr "%q, %q, и %q должны быть одной длинны"

#: py/objint.c
msgid "%q=%q"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
#, c-format
msgid "%s error 0x%x"
msgstr "%s ошибка 0x%x"

#: py/argcheck.c
msgid "'%q' argument required"
msgstr "Требуется аргумент '%q'"

#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr "Объект '%q' не поддерживает '%q'"

#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr "Объект '%q' не является итератором"

#: py/objtype.c py/runtime.c shared-module/atexit/__init__.c
msgid "'%q' object is not callable"
msgstr "Объект '%q' не является вызываемым"

#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr "Объект '%q' не является итерируемым"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' ожидает метку"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' ожидает регистр"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' ожидает специальный регистр"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' ожидает регистр FPU"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' ожидает адрес в формате [a, b]"

#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' ожидает целое число"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' ожидает не более r%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' ожидает {r0, r1, ...}"

#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d isn't within range %d..%d"
msgstr "'%s' целое число %d не находится в пределах диапазона %d..%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x doesn't fit in mask 0x%x"
msgstr "'%s' целое число 0x%x не помещается в маску 0x%x"

#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item assignment"
msgstr "Объект '%s' не поддерживает присвоение элементов"

#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item deletion"
msgstr "Объект '%s' не поддерживает удаление элементов"

#: py/runtime.c
msgid "'%s' object has no attribute '%q'"
msgstr "Объект '%s' не имеет атрибута '%q'"

#: py/obj.c
#, c-format
msgid "'%s' object isn't subscriptable"
msgstr "Объект '%s' не может быть подписан"

#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr "Выравнивание '=' недопустимо в спецификаторе формата строки"

#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "'S' и 'O' не являются поддерживаемыми типами форматов"

#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' требует 1 аргумент"

#: py/compile.c
msgid "'await' outside function"
msgstr "'await' вне функции"

#: py/compile.c
msgid "'await', 'async for' or 'async with' outside async function"
msgstr "'await', 'async for' или 'async with' вне асинхронной функции"

#: py/compile.c
msgid "'break' outside loop"
msgstr "'break' вне цикла"

#: py/compile.c
msgid "'continue' outside loop"
msgstr "'continue' вне цикла"

#: py/objgenerator.c
msgid "'coroutine' object is not an iterator"
msgstr "Объект 'coroutine' не является итератором"

#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' требует как минимум 2 аргумента"

#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' требует целочисленных аргументов"

#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' требует 1 аргумент"

#: py/compile.c
msgid "'return' outside function"
msgstr "'return' вне функции"

#: py/compile.c
msgid "'yield from' inside async function"
msgstr "'yield from' внутри асинхронной функции"

#: py/compile.c
msgid "'yield' outside function"
msgstr "'yield' вне функции"

#: py/compile.c
msgid "*x must be assignment target"
msgstr "*x должно быть целью назначения"

#: py/obj.c
msgid ", in %q\n"
msgstr ", в %q\n"

#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr "0.0 в комплексную степень"

#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "3-аргументный pow() не поддерживается"

#: shared-module/msgpack/__init__.c
msgid "64 bit types"
msgstr "64-битные типы"

#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: ports/atmel-samd/common-hal/countio/Counter.c
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "Канал аппаратного прерывания уже используется"

#: ports/espressif/common-hal/analogio/AnalogIn.c
msgid "ADC2 is being used by WiFi"
msgstr "ADC2 используется WiFi"

#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
#, c-format
msgid "Address must be %d bytes long"
msgstr "Адрес должен быть длиной %d байт"

#: ports/espressif/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
msgstr "Все периферийные устройства CAN уже используются"

#: ports/espressif/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Все периферийные устройства I2C уже используются"

#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
msgid "All I2C targets are in use"
msgstr ""

#: ports/espressif/common-hal/countio/Counter.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr "Все блоки PCNT уже используются"

#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "All RX FIFOs in use"
msgstr "Все RX FIFO уже используются"

#: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Все периферийные устройства SPI уже используются"

#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c
msgid "All UART peripherals are in use"
msgstr "Все периферийные устройства UART уже используются"

#: ports/nrf/common-hal/countio/Counter.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c
#: shared-bindings/pwmio/PWMOut.c
msgid "All channels in use"
msgstr "Все каналы уже используются"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Все каналы событий уже используются"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "All state machines in use"
msgstr "Все машины состояний уже используются"

#: ports/atmel-samd/audio_dma.c
msgid "All sync event channels in use"
msgstr "Все каналы событий синхронизации уже используются"

#: shared-bindings/pwmio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Все таймеры для этого пина уже используются"

#: ports/atmel-samd/common-hal/_pew/PewPew.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/neopixel_write/__init__.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: ports/espressif/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
msgid "All timers in use"
msgstr "Все таймеры уже используются"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr "Уже объявляемся (advertising)."

#: ports/atmel-samd/common-hal/canio/Listener.c
msgid "Already have all-matches listener"
msgstr "Уже есть универсальный слушатель"

#: shared-module/memorymonitor/AllocationAlarm.c
#: shared-module/memorymonitor/AllocationSize.c
msgid "Already running"
msgstr "Уже запущен"

#: ports/espressif/common-hal/wifi/Radio.c
msgid "Already scanning for wifi networks"
msgstr "Поиск сетей wifi уже происходит"

#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Another PWMAudioOut is already active"
msgstr "Другой PWMAudioOut уже активен"

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Другая передача уже активна"

#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr "Массив должен содержать полуслова (тип 'H')"

#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Значения массива должны быть однобайтовыми."

#: shared-bindings/microcontroller/Pin.c
msgid "At most %d %q may be specified (not %d)"
msgstr "Может быть указано не более %d %q (не %d)"

#: shared-module/memorymonitor/AllocationAlarm.c
#, c-format
msgid "Attempt to allocate %d blocks"
msgstr "Попытка выделения %d блоков"

#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when VM not running."
msgstr "Попытка выделения heap пока виртуальная машина не запущена."

#: ports/raspberrypi/audio_dma.c
msgid "Audio conversion not implemented"
msgstr "Преобразование звука не реализовано"

#: shared-bindings/wifi/Radio.c
msgid "AuthMode.OPEN is not used with password"
msgstr "AuthMode.OPEN не используется с паролем"

#: shared-bindings/wifi/Radio.c supervisor/shared/web_workflow/web_workflow.c
msgid "Authentication failure"
msgstr "Ошибка аутентификации"

#: main.c
msgid "Auto-reload is off.\n"
msgstr "Автоматическая перезагрузка отключена.\n"

#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Автоматическая перезагрузка включена. Просто сохрани файл по USB или зайди в "
"REPL чтобы отключить.\n"

#: ports/espressif/common-hal/canio/CAN.c
msgid "Baudrate not supported by peripheral"
msgstr ""
"Скорость обмена данными (Baudrate) не поддерживается периферийным устройством"

#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr "Ниже минимальной частоты кадров"

#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must be sequential pins"
msgstr ""
"Битовый тактовый генератор и выбор слова должны быть последовательными пинами"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr ""
"Битовый тактовый генератор и выбор слова должны использовать один источник "
"тактирования"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Битовая глубина должна быть кратна 8."

#: shared-bindings/bitmaptools/__init__.c
msgid "Bitmap size and bits per value must match"
msgstr "Размер bitmap и количество бит-на-значение должны совпадать"

#: supervisor/shared/safe_mode.c
msgid "Boot device must be first device (interface #0)."
msgstr "Загрузочное устройство должно быть первым устройством (интерфейс #0)."

#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Both RX and TX required for flow control"
msgstr "Для управления потоком требуется как RX, так и TX"

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Оба пина должны поддерживать аппаратные прерывания"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/is31fl3741/FrameBuffer.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "Brightness must be 0-1.0"
msgstr "Яркость должна быть в диапазоне от 0 до 1.0"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Brightness not adjustable"
msgstr "Яркость не регулируется"

#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr "Буфер + сдвиг слишком малы %d %d %d"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Buffer elements must be 4 bytes long or less"
msgstr "Элементы буфера должны иметь длину не более 4 байт"

#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is not a bytearray."
msgstr "Буфер не является байтовым массивом (bytearray)."

#: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is too small"
msgstr "Буфер слишком мал"

#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr "Размер буфера %d слишком большой. Он должен быть меньше чем %d"

#: ports/atmel-samd/common-hal/sdioio/SDCard.c
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
msgid "Buffer length must be a multiple of 512"
msgstr "Размер буфера должен быть кратен 512"

#: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Буфер должен быть кратен 512"

#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr "Буфер слишком короткий на %d байт"

#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "Buffers must be same size"
msgstr "Буферы должны быть одинакового размера"

#: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
#: ports/raspberrypi/common-hal/paralleldisplay/ParallelBus.c
#, c-format
msgid "Bus pin %d is already in use"
msgstr "Пин шины %d уже используется"

#: shared-bindings/_bleio/UUID.c
msgid "Byte buffer must be 16 bytes."
msgstr "Буфер байтов должен быть размером 16 байтам."

#: shared-bindings/aesio/aes.c
msgid "CBC blocks must be multiples of 16 bytes"
msgstr "Блоки CBC должны быть кратны 16 байтам"

#: supervisor/shared/safe_mode.c
msgid "CIRCUITPY drive could not be found or created."
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "CRC or checksum was invalid"
msgstr "CRC или контрольная сумма неправильная"

#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr "Вызовите super().__init__() перед обращением к родному объекту."

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Camera init"
msgstr ""

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on RTC IO from deep sleep."
msgstr "Сигнал из глубокого сна может подаваться только на пине RTC IO."

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on one low pin while others alarm high from deep sleep."
msgstr ""
"Сигнал из глубокого сна может подаваться по низкому уровню только на одном "
"пане, пока остальные подают сигнал по высокому уровню."

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on two low pins from deep sleep."
msgstr ""
"Сигнал из глубокого сна может подаваться только на двух пинах по низкому "
"уровню."

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "Can't set CCCD on local Characteristic"
msgstr "Невозможно установить CCCD на локальную Characteristic"

#: shared-bindings/storage/__init__.c shared-bindings/usb_cdc/__init__.c
#: shared-bindings/usb_hid/__init__.c shared-bindings/usb_midi/__init__.c
msgid "Cannot change USB devices now"
msgstr "Сейчас невозможно изменить USB-устройства"

#: shared-bindings/_bleio/Adapter.c
msgid "Cannot create a new Adapter; use _bleio.adapter;"
msgstr "Невозможно создать новый Adapter; используйте _bleio.adapter;"

#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "Невозможно удалить значения"

#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "Невозможно установить подтяжку в режиме output"

#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr "Невозможно получить температуру"

#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""
"Невозможно иметь ответы сканирования для расширенных, подключаемых "
"объявлений (advertisements)."

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot pull on input-only pin."
msgstr ""
"Невозможно установить подтяжку на пине, предназначенном только для ввода."

#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "Невозможно записать в файл"

#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when visible via USB."
msgstr "Невозможно перемонтировать '/' пока он виден через USB."

#: ports/atmel-samd/common-hal/microcontroller/__init__.c
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present"
msgstr ""

#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Cannot set socket options"
msgstr "Невозможно установить параметры сокета"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "Невозможно установить значение в режиме input."

#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr "Невозможно указать RTS или CTS в режиме RS485"

#: py/objslice.c
msgid "Cannot subclass slice"
msgstr "Срез субкласса невозможен"

#: shared-module/bitbangio/SPI.c
msgid "Cannot transfer without MOSI and MISO pins"
msgstr ""

#: shared-bindings/pwmio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr "Невозможно изменить частоту на таймере, который уже используется"

#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge, only level"
msgstr ""

#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level."
msgstr "Невозможно проснуться по спаду/росту на пине. Только по уровню."

#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr "Запись в CharacteristicBuffer не предусмотрена"

#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr "Код ядра CircuitPython сильно крашнулся. Упс!\n"

#: supervisor/shared/safe_mode.c
msgid "CircuitPython was unable to allocate the heap."
msgstr "CircuitPython не смог выделить heap."

#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr "Длинна такта слишком велика"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Источник тактирования уже используется"

#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
"Соединение было отключено и больше не может использоваться. Создайте новое "
"соединение."

#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr "Файл .mpy поврежден"

#: ports/espressif/common-hal/neopixel_write/__init__.c
msgid "Could not retrieve clock"
msgstr "Не удалось извлечь тактирование"

#: shared-bindings/_bleio/Adapter.c
msgid "Could not set address"
msgstr "Не удалось задать адрес"

#: shared-bindings/pwmio/PWMOut.c
msgid "Could not start PWM"
msgstr "Не удалось запустить ШИМ"

#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr "Не удалось запустить прерывание, RX занят"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr "Не удалось выделить место для декодера"

#: supervisor/shared/safe_mode.c
msgid "Crash into the HardFault_Handler."
msgstr "Крашнулся в HardFault_Handler."

#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr "Ошибка инициализации канала ЦАП"

#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr "Ошибка инициализации устройства ЦАП"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "ЦАП уже используется"

#: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplay/ParallelBus.c
msgid "Data 0 pin must be byte aligned"
msgstr "Пин data 0 должен быть байтово выровнен"

#: shared-module/audiocore/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr "Блок данных должен следовать за блоком fmt"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data not supported with directed advertising"
msgstr "Данные не поддерживаются направленным объявлением"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data too large for advertisement packet"
msgstr "Данные слишком велики для пакета объявления"

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Deep sleep pins must use a rising edge with pulldown"
msgstr ""
"Выводы глубокого сна должны использовать сигнал по возрастанию с подтяжкой к "
"земле"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr "Емкость destination меньше, чем destination_length."

#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr "Устройство используется"

#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display must have a 16 bit colorspace."
msgstr "Дисплей должен иметь 16-битное цветовое пространство."

#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display rotation must be in 90 degree increments"
msgstr "Поворот дисплея должен осуществляться с шагом 90 градусов"

#: main.c
msgid "Done"
msgstr ""

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr "Drive mode не используется, когда направление является входным."

#: shared-bindings/aesio/aes.c
msgid "ECB only operates on 16 bytes at a time"
msgstr "ECB работает только с 16 байтами за раз"

#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/canio/CAN.c
msgid "ESP-IDF memory allocation failed"
msgstr "Ошибка выделения памяти ESP-IDF"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr "Канал EXTINT уже используется"

#: shared-module/synthio/MidiTrack.c
#, c-format
msgid "Error in MIDI stream at position %d"
msgstr "Ошибка в MIDI-потоке на позиции %d"

#: extmod/modure.c
msgid "Error in regex"
msgstr "Ошибка в регулярном выражении(regex)"

#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "Error: Failure to bind"
msgstr "Ошибка: Сбой привязки"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c
#: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c
#: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c
#: shared-bindings/neopixel_write/__init__.c
msgid "Expected a %q"
msgstr "Ожидалось(ся) %q"

#: shared-bindings/alarm/__init__.c
msgid "Expected an alarm"
msgstr "Ожидался сигнал"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
msgstr "Расширенные объявления с ответом сканирования не поддерживаются."

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is defined for ndarrays only"
msgstr "БПФ определено только для ndarrays"

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is implemented for linear arrays only"
msgstr "БПФ реализовано только для линейных массивов"

#: ports/espressif/common-hal/ssl/SSLSocket.c
msgid "Failed SSL handshake"
msgstr "Не удался SSL handshake"

#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr "Не удалось отправить команду."

#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr "Не удалось получить mutex, ошибка 0x%04x"

#: shared-module/rgbmatrix/RGBMatrix.c
msgid "Failed to allocate %q buffer"
msgstr ""

#: ports/espressif/common-hal/wifi/__init__.c
msgid "Failed to allocate Wifi memory"
msgstr "Не удалось выделить память Wifi"

#: ports/espressif/common-hal/wifi/ScannedNetworks.c
msgid "Failed to allocate wifi scan memory"
msgstr "Не удалось выделить память для сканирования wifi"

#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Failed to buffer the sample"
msgstr "Не удалось выполнить буферизацию образца"

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: internal error"
msgstr "Не удалось подключиться: внутренняя ошибка"

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: timeout"
msgstr "Не удалось подключиться: тайм-аут"

#: shared-module/audiomp3/MP3Decoder.c
msgid "Failed to parse MP3 file"
msgstr "Не удалось распарсить файл MP3"

#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr "Не удалось освободить mutex, ошибка 0x%04x"

#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr "Не удалось записать внутреннюю флэш-память."

#: supervisor/shared/safe_mode.c
msgid "Fatal error."
msgstr "Фатальная ошибка."

#: py/moduerrno.c
msgid "File exists"
msgstr "Файл существует"

#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "Filters too complex"
msgstr "Фильтры слишком сложные"

#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware image is invalid"
msgstr "Образ прошивки неправильный"

#: shared-bindings/bitmaptools/__init__.c
msgid "For L8 colorspace, input bitmap must have 8 bits per pixel"
msgstr ""
"Для цветового пространства L8 входной bitmap должен иметь 8 бит на пиксель"

#: shared-bindings/bitmaptools/__init__.c
msgid "For RGB colorspaces, input bitmap must have 16 bits per pixel"
msgstr ""
"Для цветового пространства RGB входной bitmap должен иметь 16 бит на пиксель"

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Format not supported"
msgstr "Формат не поддерживается"

#: ports/mimxrt10xx/common-hal/microcontroller/Processor.c
msgid ""
"Frequency must be 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 or 1008 Mhz"
msgstr ""

#: shared-bindings/pwmio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
"Частота должна соответствовать существующему PWMOut, использующему этот "
"таймер"

#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr "Функция требует блокировки"

#: ports/cxd56/common-hal/gnss/GNSS.c
msgid "GNSS init"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Generic Failure"
msgstr "Общий сбой"

#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr "Группа уже используется"

#: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "Half duplex SPI is not implemented"
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c
#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c
#: ports/stm/common-hal/sdioio/SDCard.c
msgid "Hardware busy, try alternative pins"
msgstr "Оборудование занято, попробуйте использовать другие пины"

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr "Оборудование используется, попробуйте использовать другие пины"

#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "Операция ввода-вывода на закрытом файле"

#: ports/stm/common-hal/busio/I2C.c
msgid "I2C init error"
msgstr ""

#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "I2C peripheral in use"
msgstr "Периферийное устройство I2C уже используется"

#: shared-bindings/audiobusio/I2SOut.c
msgid "I2SOut not available"
msgstr "I2SOut недоступен"

#: shared-bindings/aesio/aes.c
#, c-format
msgid "IV must be %d bytes long"
msgstr "IV должен быть длиной %d байт"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "In-buffer elements must be <= 4 bytes long"
msgstr "Элементы буфера должны быть длиной <= 4 байта"

#: py/persistentcode.c
msgid ""
"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
"mpy-update for more info."
msgstr ""
"Несовместимый файл .mpy. Пожалуйста, обновите все файлы .mpy. См. http://"
"adafru.it/mpy-update для получения дополнительной информации."

#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr "Неправильный размер буфера"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Init program size invalid"
msgstr "Неверный размер программы инициализации"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin direction conflicts with initial out pin direction"
msgstr ""
"Начальное направление пина set конфликтует с начальным направлением пина out"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin state conflicts with initial out pin state"
msgstr ""
"Начальное состояние пина set конфликтует с начальным состоянием пина out"

#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "Initialization failed due to lack of memory"
msgstr "Инициализация не удалась из-за нехватки памяти"

#: shared-bindings/bitops/__init__.c
#, c-format
msgid "Input buffer length (%d) must be a multiple of the strand count (%d)"
msgstr "Длина входного буфера (%d) должна быть кратна количеству strand (%d)"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr "Ввод занимает слишком много времени"

#: ports/espressif/common-hal/neopixel_write/__init__.c py/moduerrno.c
msgid "Input/output error"
msgstr "Ошибка ввода/вывода"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d shifts in more bits than pin count"
msgstr ""
"Инструкция %d вводит (shifts in) большее количество бит, чем количество пинов"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d shifts out more bits than pin count"
msgstr ""
"Инструкция %d выводит (shifts out) большее количество бит, чем количество "
"пинов"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d uses extra pin"
msgstr "Инструкция %d использует дополнительный пин"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Instruction %d waits on input outside of count"
msgstr "Инструкция %d ожидает ввода за пределами count"

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr "Неполная аутентификация"

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr "Недостаточное шифрование"

#: ports/espressif/common-hal/wifi/Radio.c
msgid "Interface must be started"
msgstr "Интерфейс должен быть запущен"

#: ports/atmel-samd/audio_dma.c ports/raspberrypi/audio_dma.c
msgid "Internal audio buffer too small"
msgstr "Внутренний звуковой буфер слишком мал"

#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr "Внутренняя ошибка определения"

#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
msgid "Internal error"
msgstr "Внутренняя ошибка"

#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr "Внутренняя ошибка #%d"

#: supervisor/shared/safe_mode.c
msgid "Internal watchdog timer expired."
msgstr ""

#: py/argcheck.c
msgid "Invalid %q"
msgstr "Недопустимый %q"

#: shared-bindings/microcontroller/Pin.c
msgid "Invalid %q pin"
msgstr "Недопустимый пин %q"

#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr "Недопустимое значение единицы АЦП"

#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Invalid BLE parameter"
msgstr "Недопустимый параметр BLE"

#: shared-bindings/wifi/Radio.c
msgid "Invalid BSSID"
msgstr "Неверный BSSID"

#: shared-bindings/wifi/Radio.c
msgid "Invalid MAC address"
msgstr "Неверный MAC-адрес"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
#: py/moduerrno.c
msgid "Invalid argument"
msgstr "Недопустимый аргумент"

#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr "Недопустимое бит-на-значение"

#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "Invalid data_pins[%d]"
msgstr "Неверный data_pins[%d]"

#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr "Неверный размер блока формата"

#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr "Неправильный доступ к памяти."

#: ports/espressif/common-hal/wifi/Radio.c
msgid "Invalid multicast MAC address"
msgstr "Неверный MAC-адрес multicast"

#: shared-bindings/busio/UART.c
msgid "Invalid pins"
msgstr "Недопустимые пины"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Invalid size"
msgstr "Неверный размер"

#: ports/espressif/common-hal/ssl/SSLContext.c
msgid "Invalid socket for TLS"
msgstr "Неверный сокет для TLS"

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Invalid state"
msgstr "Неверное состояние"

#: shared-bindings/aesio/aes.c
msgid "Key must be 16, 24, or 32 bytes long"
msgstr "Ключ должен быть длинной 16, 24 или 32 байта"

#: shared-module/is31fl3741/FrameBuffer.c
msgid "LED mappings must match display size"
msgstr ""

#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "LHS ключевого слова arg должен быть идентификатором(id)"

#: shared-module/displayio/Group.c
msgid "Layer already in a group"
msgstr ""

#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "MAC address was invalid"
msgstr "MAC адрес был недействительным"

#: shared-bindings/is31fl3741/IS31FL3741.c
msgid "Mapping must be a tuple"
msgstr ""

#: shared-module/displayio/Shape.c
#, c-format
msgid "Maximum x value when mirrored is %d"
msgstr "Максимальное значение x при зеркальном отображении - %d"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr "Задержка включения микрофона должна быть в диапазоне от 0.0 до 1.0"

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched data size"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched swap flag"
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr "Отсутствует пин MISO или MOSI"

#: ports/stm/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI pin"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d reads pin(s)"
msgstr "Отсутствует first_in_pin. Инструкция %d читает состояние пина (-ов)"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)"
msgstr "Отсутствует first_out_pin. Инструкция %d вводит (shifts out) на пин(ы)"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_in_pin. Instruction %d waits based on pin"
msgstr "Отсутствует first_in_pin. Инструкция %d ожидает на основе пина"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)"
msgstr ""
"Отсутствует first_out_pin. Инструкция %d выводит (shifts out) на пин(ы)"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_out_pin. Instruction %d writes pin(s)"
msgstr "Отсутствует first_out_pin. Инструкция %d записывает пин(ы)"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing first_set_pin. Instruction %d sets pin(s)"
msgstr "Отсутствует first_set_pin. Инструкция %d устанавливает пин(ы)"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#, c-format
msgid "Missing jmp_pin. Instruction %d jumps on pin"
msgstr "Отсутствует jmp_pin. Инструкция %d перепрыгивает на пин"

#: shared-bindings/busio/UART.c shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr "Должен быть субклассом %q."

#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr "Пин MISO или MOSI должен быть предоставлен"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr "Количество используемых rgb-пинов должно быть кратно 6, а не %d"

#: supervisor/shared/safe_mode.c
msgid "NLR jump failed. Likely memory corruption."
msgstr "Не удалось выполнить NLR jump. Вероятно, повреждение памяти."

#: ports/espressif/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr "Ошибка NVS"

#: py/qstr.c
msgid "Name too long"
msgstr "Имя слишком длинное"

#: shared-bindings/displayio/TileGrid.c
msgid "New bitmap must be same size as old bitmap"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
msgid "Nimble out of memory"
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "No CCCD for this Characteristic"
msgstr "Нет CCCD для этой Characteristic"

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "ЦАП отсутствует на чипе"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA channel found"
msgstr "Канал DMA не найден"

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA pacing timer found"
msgstr ""

#: shared-module/adafruit_bus_device/i2c_device/I2CDevice.c
#, c-format
msgid "No I2C device at address: 0x%x"
msgstr ""

#: supervisor/shared/web_workflow/web_workflow.c
msgid "No IP"
msgstr ""

#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr "Нет пина MISO"

#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
msgid "No MISO pin"
msgstr ""

#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr "Нет пина MOSI"

#: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c
msgid "No MOSI pin"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Нет пина RX"

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Нет пина TX"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr ""

#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "No capture in progress"
msgstr "Захват не ведется"

#: shared-bindings/_bleio/PacketBuffer.c
msgid "No connection: length cannot be determined"
msgstr "Нет соединения: длина не может быть определена"

#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr "Нет шины %q по умолчанию"

#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr "Свободные GCLK отсутствуют"

#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr "Отсутствует аппаратный генератор случайных чисел"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in in program"
msgstr "Нет in в программе"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in or out in program"
msgstr "В программе отсутствует ввод или вывод"

#: shared-bindings/aesio/aes.c
msgid "No key was specified"
msgstr "Ключ не был указан"

#: shared-bindings/time/__init__.c
msgid "No long integer support"
msgstr "Нет поддержки длинных целых чисел (long integer)"

#: shared-module/usb_hid/__init__.c
#, c-format
msgid "No more than %d HID devices allowed"
msgstr "Допускается не более %d HID устройств"

#: shared-bindings/wifi/Radio.c
msgid "No network with that ssid"
msgstr "Нет сети с этим ssid"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No out in program"
msgstr "В программе отсутствует вывод"

#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/espressif/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "No pull up found on SDA or SCL; check your wiring"
msgstr ""
"Подтяжка на выводах SDA или SCL не обнаружена; проверь схему подключения"

#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr "Отсутствует подтяжка к земле на пине; Рекомендуется 1 Мегаом"

#: py/moduerrno.c
msgid "No space left on device"
msgstr "На устройстве не осталось свободного места"

#: py/moduerrno.c
msgid "No such device"
msgstr ""

#: py/moduerrno.c
msgid "No such file/directory"
msgstr "Файл/директория не существует"

#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr "Нет доступного таймера"

#: supervisor/shared/safe_mode.c
msgid "Nordic system firmware failure assertion."
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Nordic system firmware out of memory"
msgstr ""

#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
msgid "Not a valid IP string"
msgstr "Недействительная строка IP"

#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "Not connected"
msgstr "Не подключено"

#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
#: shared-bindings/audiopwmio/PWMAudioOut.c
msgid "Not playing"
msgstr "Не играет"

#: shared-bindings/_bleio/__init__.c
msgid "Not settable"
msgstr "Не устанавливается"

#: ports/espressif/common-hal/paralleldisplay/ParallelBus.c
#, c-format
msgid "Number of data_pins must be 8 or 16, not %d"
msgstr "Количество data_pins должно быть 8 или 16, а не %d"

#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
"Объект был деинициализирован и больше не может быть использован. Создайте "
"новый объект."

#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr ""

#: supervisor/shared/bluetooth/bluetooth.c
msgid "Off"
msgstr ""

#: supervisor/shared/bluetooth/bluetooth.c
msgid "Ok"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "Only 8 or 16 bit mono with "
msgstr "Только 8- или 16-битное моно с "

#: ports/espressif/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr "Поддерживаются только адреса IPv4"

#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Only IPv4 sockets supported"
msgstr "Поддерживаются только сокеты IPv4"

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""
"Поддерживается только формат Windows, несжатый BMP: заданный размер "
"заголовка - %d"

#: shared-bindings/_bleio/Adapter.c
msgid "Only connectable advertisements can be directed"
msgstr ""

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Only edge detection is available on this hardware"
msgstr ""

#: shared-bindings/ipaddress/__init__.c
msgid "Only int or string supported for ip"
msgstr ""

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
msgstr ""

#: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
msgid "Only one TouchAlarm can be set in deep sleep."
msgstr ""

#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
msgid "Only one address is allowed"
msgstr ""

#: ports/atmel-samd/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
#: ports/stm/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set"
msgstr ""

#: ports/espressif/common-hal/alarm/time/TimeAlarm.c
#: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set."
msgstr ""

#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""

#: py/moduerrno.c
msgid "Operation not permitted"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Operation or feature not supported"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Operation timed out"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Out of memory"
msgstr ""

#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Out of sockets"
msgstr ""

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Out-buffer elements must be <= 4 bytes long"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "PDMIn not available"
msgstr ""

#: shared-bindings/pwmio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "PWM restart"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice already in use"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice channel A already in use"
msgstr ""

#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "Peripheral in use"
msgstr ""

#: py/moduerrno.c
msgid "Permission denied"
msgstr ""

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Pin cannot wake from Deep Sleep"
msgstr "Пин не может вывести из глубокого сна"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Pin count too large"
msgstr "Слишком большое количество пинов"

#: ports/stm/common-hal/alarm/pin/PinAlarm.c
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin interrupt already in use"
msgstr "Прерывание пина уже используется"

#: shared-bindings/adafruit_bus_device/spi_device/SPIDevice.c
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pin is input only"
msgstr "Пин является только входом"

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "Pin must be on PWM Channel B"
msgstr "Пин должен быть на канале ШИМ B"

#: ports/atmel-samd/common-hal/countio/Counter.c
msgid "Pin must support hardware interrupts"
msgstr "Пин должен поддерживать аппаратные прерывания"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes.  If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
"Pinout использует %d байт на элемент, что потребляет больше, чем идеальные "
"%d байт.   Если этого нельзя избежать, передайте allow_inefficient=True в "
"конструктор"

#: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
msgid "Pins must be sequential"
msgstr "Пины должны быть последовательными"

#: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
msgid "Pins must be sequential GPIO pins"
msgstr "Пины должны быть последовательными выводами GPIO"

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Pins must share PWM slice"
msgstr "Пины должны иметь общий срез ШИМ"

#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr ""

#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr ""

#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
msgstr ""
"Нажмите любую клавишу чтобы зайти в REPL. Используйте CTRL-D для "
"перезагрузки.\n"

#: main.c
msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
msgstr "Притворяюсь глубоко спать до сигнала, CTRL-C или запись в файл.\n"

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does IN without loading ISR"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does OUT without loading OSR"
msgstr ""

#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Program size invalid"
msgstr ""

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr ""

#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "RAISE mode is not implemented"
msgstr ""

#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "RISE_AND_FALL not available on this chip"
msgstr ""

#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""

#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RS485"
msgstr ""

#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""

#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""

#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr ""

#: extmod/vfs_fat.c py/moduerrno.c
msgid "Read-only filesystem"
msgstr ""

#: shared-module/displayio/Bitmap.c
msgid "Read-only object"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Received response was invalid"
msgstr ""

#: supervisor/shared/bluetooth/bluetooth.c
msgid "Reconnecting"
msgstr ""

#: shared-bindings/displayio/EPaperDisplay.c
msgid "Refresh too soon"
msgstr ""

#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "Requested AES mode is unsupported"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Requested resource not found"
msgstr ""

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr ""

#: main.c
msgid "Running in safe mode! Not running saved code.\n"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "SD card CSD format not supported"
msgstr ""

#: ports/cxd56/common-hal/sdioio/SDCard.c
msgid "SDCard init"
msgstr ""

#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO GetCardInfo Error %d"
msgstr ""

#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO Init Error %d"
msgstr ""

#: ports/espressif/common-hal/busio/SPI.c
msgid "SPI configuration failed"
msgstr ""

#: ports/stm/common-hal/busio/SPI.c
msgid "SPI init error"
msgstr ""

#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "SPI peripheral in use"
msgstr ""

#: ports/stm/common-hal/busio/SPI.c
msgid "SPI re-init"
msgstr ""

#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "Scale dimensions must divide by 3"
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progess. Stop with stop_scan."
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr ""

#: shared-bindings/ssl/SSLContext.c
msgid "Server side context cannot have hostname"
msgstr ""

#: ports/cxd56/common-hal/camera/Camera.c
msgid "Size not supported"
msgstr ""

#: ports/raspberrypi/common-hal/alarm/SleepMemory.c
msgid "Sleep Memory not available"
msgstr ""

#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr ""

#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/TileGrid.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr ""

#: ports/espressif/common-hal/socketpool/SocketPool.c
msgid "SocketPool can only be used with wifi.radio"
msgstr ""

#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr ""

#: shared-bindings/paralleldisplay/ParallelBus.c
msgid "Specify exactly one of data0 or data_pins"
msgstr "Укажите точно один из data0 или data_pins"

#: extmod/modure.c
msgid "Splitting with sub-captures"
msgstr ""

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo left must be on PWM channel A"
msgstr ""

#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo right must be on PWM channel B"
msgstr ""

#: shared-bindings/multiterminal/__init__.c
msgid "Stream missing readinto() or write() method."
msgstr ""

#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr "Предоставьте хотяб один пин UART"

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""

#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""

#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Increase the stack size if you know how. If not:"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"The `microcontroller` module was used to boot into safe mode. Press reset to "
"exit safe mode."
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr "Длина rgb_pins должна быть 6, 12, 18, 24 или 30"

#: supervisor/shared/safe_mode.c
msgid ""
"The microcontroller's power dipped. Make sure your power supply provides\n"
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY)."
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's channel count does not match the mixer's"
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's sample rate does not match the mixer's"
msgstr ""

#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's signedness does not match the mixer's"
msgstr ""

#: shared-module/imagecapture/ParallelImageCapture.c
msgid "This microcontroller does not support continuous capture."
msgstr ""

#: shared-module/paralleldisplay/ParallelBus.c
msgid ""
"This microcontroller only supports data0=, not data_pins=, because it "
"requires contiguous pins."
msgstr ""
"Этот микроконтроллер поддерживает только data0=, а не data_pins=, поскольку "
"для него требуются смежные выводы."

#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr ""

#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
msgid "Tile index out of bounds"
msgstr ""

#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""

#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "To exit, please reset the board without "
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample"
msgstr ""

#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr ""

#: shared-module/displayio/__init__.c
msgid "Too many display busses"
msgstr ""

#: shared-module/displayio/__init__.c
msgid "Too many displays"
msgstr ""

#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Total data to write is larger than %q"
msgstr ""

#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
#: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c
#: ports/stm/common-hal/alarm/touch/TouchAlarm.c
msgid "Touch alarms not available"
msgstr ""

#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "UART de-init"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "UART init"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "UART re-init"
msgstr ""

#: ports/stm/common-hal/busio/UART.c
msgid "UART write"
msgstr ""

#: shared-module/usb_hid/Device.c
msgid "USB busy"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "USB devices need more endpoints than are available."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "USB devices specify too many interface names."
msgstr ""

#: shared-module/usb_hid/Device.c
msgid "USB error"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "UUID integer value must be 0-0xffff"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr ""

#: ports/espressif/common-hal/busio/I2C.c
msgid "Unable to create lock"
msgstr ""

#: shared-module/displayio/I2CDisplay.c shared-module/is31fl3741/IS31FL3741.c
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr ""

#: py/parse.c
msgid "Unable to init parser"
msgstr ""

#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr ""

#: ports/espressif/common-hal/mdns/Server.c
msgid "Unable to start mDNS query"
msgstr ""

#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr ""

#: shared-bindings/alarm/SleepMemory.c
msgid "Unable to write to sleep_memory."
msgstr ""

#: ports/nrf/common-hal/_bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr ""

#: ports/espressif/common-hal/ssl/SSLSocket.c
#, c-format
msgid "Unhandled ESP TLS error %d %d %x %d"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error at %s:%d: %d"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error: %d"
msgstr ""

#: shared-bindings/wifi/Radio.c
#, c-format
msgid "Unknown failure %d"
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr ""

#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error at %s:%d: %d"
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %04x"
msgstr ""

#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %d"
msgstr ""

#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""

#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "Unsupported colorspace"
msgstr ""

#: shared-module/displayio/display_core.c
msgid "Unsupported display bus type"
msgstr ""

#: shared-module/audiocore/WaveFile.c
msgid "Unsupported format"
msgstr ""

#: shared-bindings/hashlib/__init__.c
msgid "Unsupported hash algorithm"
msgstr ""

#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Update Failed"
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length != required fixed length"
msgstr ""

#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length > max_length"
msgstr ""

#: ports/espressif/common-hal/espidf/__init__.c ports/espressif/esp_error.c
msgid "Version was invalid"
msgstr ""

#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""

#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""

#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer is not currently running"
msgstr ""

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET"
msgstr ""

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "WatchDogTimer.timeout must be greater than 0"
msgstr ""

#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Visit circuitpython.org for more information.\n"
"\n"
"To list built-in modules type `help(\"modules\")`.\n"
msgstr ""

#: supervisor/shared/web_workflow/web_workflow.c
msgid "Wi-Fi: "
msgstr ""

#: main.c
msgid "Woken up by alarm.\n"
msgstr ""

#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "You are in safe mode because:\n"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid ""
"You pressed the reset button during boot. Press again to exit safe mode."
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "You requested starting safe mode by "
msgstr ""

#: py/objtype.c
msgid "__init__() should return None"
msgstr ""

#: py/objtype.c
msgid "__init__() should return None, not '%q'"
msgstr ""

#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr ""

#: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c
msgid "a bytes-like object is required"
msgstr ""

#: shared-bindings/i2ctarget/I2CTarget.c
msgid "address out of bounds"
msgstr ""

#: shared-bindings/i2ctarget/I2CTarget.c
msgid "addresses is empty"
msgstr ""

#: py/compile.c
msgid "annotation must be an identifier"
msgstr ""

#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""

#: py/objobject.c
msgid "arg must be user-type"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "argsort argument must be an ndarray"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""

#: py/runtime.c shared-bindings/supervisor/__init__.c
msgid "argument has wrong type"
msgstr ""

#: py/compile.c
msgid "argument name reused"
msgstr ""

#: py/argcheck.c shared-bindings/_stage/__init__.c
#: shared-bindings/digitalio/DigitalInOut.c
msgid "argument num/types mismatch"
msgstr ""

#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/numpy/transform.c
msgid "arguments must be ndarrays"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "array has too many dimensions"
msgstr ""

#: py/objarray.c shared-bindings/alarm/SleepMemory.c
#: shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""

#: py/objstr.c
msgid "attributes not supported yet"
msgstr ""

#: extmod/ulab/code/ulab_tools.c
msgid "axis is out of bounds"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
msgid "axis must be None, or an integer"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "axis too long"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "background value out of range of target"
msgstr ""

#: py/builtinevex.c
msgid "bad compile mode"
msgstr ""

#: py/objstr.c
msgid "bad conversion specifier"
msgstr ""

#: py/objstr.c
msgid "bad format string"
msgstr ""

#: py/binary.c py/objarray.c
msgid "bad typecode"
msgstr ""

#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "bitmap sizes must match"
msgstr ""

#: extmod/modurandom.c
msgid "bits must be 32 or less"
msgstr ""

#: shared-bindings/audiomixer/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr ""

#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr ""

#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer is smaller than requested size"
msgstr ""

#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer size must be a multiple of element size"
msgstr ""

#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr ""

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr ""

#: py/modstruct.c shared-bindings/struct/__init__.c
#: shared-module/struct/__init__.c
msgid "buffer too small"
msgstr ""

#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "buffer too small for requested bytes"
msgstr ""

#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
msgid "byteorder is not a string"
msgstr ""

#: py/objarray.c
msgid "bytes length not a multiple of item size"
msgstr ""

#: py/objstr.c
msgid "bytes value out of range"
msgstr ""

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is out of range"
msgstr ""

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr ""

#: shared-module/vectorio/Circle.c shared-module/vectorio/Polygon.c
#: shared-module/vectorio/Rectangle.c
msgid "can only have one parent"
msgstr ""

#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr ""

#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr ""

#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr ""

#: py/compile.c
msgid "can't assign to expression"
msgstr ""

#: extmod/moduasyncio.c
msgid "can't cancel self"
msgstr ""

#: py/obj.c py/objint.c shared-bindings/i2ctarget/I2CTarget.c
#: shared-module/adafruit_pixelbuf/PixelBuf.c
msgid "can't convert %q to %q"
msgstr ""

#: py/runtime.c
msgid "can't convert %q to int"
msgstr ""

#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr ""

#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "can't convert complex to float"
msgstr ""

#: py/obj.c
msgid "can't convert to %q"
msgstr ""

#: py/obj.c
msgid "can't convert to complex"
msgstr ""

#: py/runtime.c
msgid "can't convert to int"
msgstr ""

#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr ""

#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr ""

#: py/compile.c
msgid "can't delete expression"
msgstr ""

#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr ""

#: py/objcomplex.c
msgid "can't do truncated division of a complex number"
msgstr ""

#: py/compile.c
msgid "can't have multiple **x"
msgstr ""

#: py/compile.c
msgid "can't have multiple *x"
msgstr ""

#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr ""

#: py/emitnative.c
msgid "can't load from '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr ""

#: py/builtinimport.c
msgid "can't perform relative import"
msgstr ""

#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "can't set 512 block size"
msgstr ""

#: py/objnamedtuple.c
msgid "can't set attribute"
msgstr ""

#: py/emitnative.c
msgid "can't store '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't store to '%q'"
msgstr ""

#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr ""

#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""

#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "cannot assign new shape"
msgstr ""

#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex to dtype"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex type"
msgstr ""

#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""

#: py/objtype.c
msgid "cannot create instance"
msgstr ""

#: py/runtime.c
msgid "cannot import name %q"
msgstr ""

#: extmod/moductypes.c
msgid "cannot unambiguously get sizeof scalar"
msgstr ""

#: py/emitnative.c
msgid "casting"
msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "channel re-init"
msgstr ""

#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr ""

#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr ""

#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "clip point must be (x,y) tuple"
msgstr ""

#: shared-bindings/msgpack/ExtType.c
msgid "code outside range 0~127"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer, tuple, list, or int"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr ""

#: shared-bindings/displayio/ColorConverter.c
msgid "color should be an int"
msgstr ""

#: py/emitnative.c
msgid "comparison of int and uint"
msgstr ""

#: py/objcomplex.c
msgid "complex division by zero"
msgstr ""

#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr ""

#: extmod/moduzlib.c
msgid "compression header"
msgstr ""

#: py/parse.c
msgid "constant must be an integer"
msgstr ""

#: py/emitnative.c
msgid "conversion to object"
msgstr ""

#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be linear arrays"
msgstr ""

#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be ndarrays"
msgstr ""

#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must not be empty"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "corrupted file"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "couldn't determine SD card version"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be iterable"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be of equal length"
msgstr ""

#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "data pin #%d in use"
msgstr "data-пин #%d уже используется"

#: extmod/ulab/code/ndarray.c
msgid "data type not understood"
msgstr ""

#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""

#: py/compile.c
msgid "default 'except' must be last"
msgstr ""

#: shared-bindings/msgpack/__init__.c
msgid "default is not a function"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr ""

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination_length must be an int >= 0"
msgstr ""

#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "diff argument must be an ndarray"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "differentiation order out of range"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "dimensions do not match"
msgstr ""

#: py/emitnative.c
msgid "div/mod not implemented for uint"
msgstr ""

#: py/objfloat.c py/objint_mpz.c
msgid "divide by zero"
msgstr ""

#: py/modmath.c py/objint_longlong.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "dtype must be float, or complex"
msgstr ""

#: py/objdeque.c
msgid "empty"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "empty file"
msgstr ""

#: extmod/moduasyncio.c extmod/moduheapq.c extmod/modutimeq.c
msgid "empty heap"
msgstr ""

#: py/objstr.c
msgid "empty separator"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr ""

#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr ""

#: shared-bindings/displayio/Shape.c
msgid "end_x should be an int"
msgstr ""

#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""

#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr ""

#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr ""

#: shared-bindings/canio/CAN.c
msgid "expected '%q' but got '%q'"
msgstr ""

#: shared-bindings/canio/CAN.c
msgid "expected '%q' or '%q' but got '%q'"
msgstr ""

#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr ""

#: py/obj.c
msgid "expected tuple/list"
msgstr ""

#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr ""

#: py/compile.c
msgid "expecting an assembler instruction"
msgstr ""

#: py/compile.c
msgid "expecting just a value for set"
msgstr ""

#: py/compile.c
msgid "expecting key:value for dict"
msgstr ""

#: shared-bindings/msgpack/__init__.c
msgid "ext_hook is not a function"
msgstr ""

#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr ""

#: py/argcheck.c
msgid "extra positional arguments given"
msgstr ""

#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
#: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/synthio/__init__.c
#: shared-module/gifio/GifWriter.c
msgid "file must be a file opened in byte mode"
msgstr ""

#: shared-bindings/traceback/__init__.c
msgid "file write is not available"
msgstr ""

#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "first argument must be a callable"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "first argument must be a function"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""

#: extmod/ulab/code/numpy/transform.c extmod/ulab/code/numpy/vector.c
msgid "first argument must be an ndarray"
msgstr ""

#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""

#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "first two arguments must be ndarrays"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "flip argument must be an ndarray"
msgstr ""

#: py/objint.c
msgid "float too big"
msgstr ""

#: py/nativeglue.c
msgid "float unsupported"
msgstr ""

#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr ""

#: py/objstr.c
msgid "format requires a dict"
msgstr ""

#: shared-bindings/microcontroller/Processor.c
msgid "frequency is read-only for this board"
msgstr ""

#: py/objdeque.c
msgid "full"
msgstr ""

#: py/argcheck.c
msgid "function doesn't take keyword arguments"
msgstr ""

#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr ""

#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "function has the same sign at the ends of interval"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray.c
msgid "function is implemented for ndarrays only"
msgstr ""

#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr ""

#: py/bc.c
msgid "function missing keyword-only argument"
msgstr ""

#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr ""

#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr ""

#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr ""

#: py/objgenerator.c
msgid "generator already executing"
msgstr ""

#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr ""

#: py/objgenerator.c py/runtime.c
msgid "generator raised StopIteration"
msgstr ""

#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr ""

#: extmod/moduhashlib.c
msgid "hash is final"
msgstr ""

#: extmod/moduheapq.c
msgid "heap must be a list"
msgstr ""

#: py/compile.c
msgid "identifier redefined as global"
msgstr ""

#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr ""

#: py/compile.c
msgid "import * not at module level"
msgstr ""

#: py/persistentcode.c
msgid "incompatible native .mpy architecture"
msgstr ""

#: py/objstr.c
msgid "incomplete format"
msgstr ""

#: py/objstr.c
msgid "incomplete format key"
msgstr ""

#: extmod/modubinascii.c
msgid "incorrect padding"
msgstr ""

#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c
msgid "index is out of bounds"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
#: ports/espressif/common-hal/pulseio/PulseIn.c py/obj.c
#: shared-bindings/bitmaptools/__init__.c
msgid "index out of range"
msgstr ""

#: py/obj.c
msgid "indices must be integers"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""

#: ports/espressif/common-hal/busio/I2C.c
msgid "init I2C"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "initial values must be iterable"
msgstr ""

#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "initial_value length is wrong"
msgstr ""

#: py/compile.c
msgid "inline assembler must be a function"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "input and output shapes are not compatible"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "input argument must be an integer, a tuple, or a list"
msgstr ""

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "input array length must be power of 2"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "input arrays are not compatible"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "input data must be an iterable"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "input dtype must be float or complex"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "input matrix is asymmetric"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "input matrix is singular"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "input must be 1- or 2-d"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be a 1D ndarray"
msgstr ""

#: extmod/ulab/code/scipy/linalg/linalg.c extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""

#: extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be an ndarray, or a scalar"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "input must be one-dimensional"
msgstr ""

#: extmod/ulab/code/ulab_tools.c
msgid "input must be square matrix"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "input vectors must be of equal length"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "inputs are not iterable"
msgstr ""

#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr ""

#: extmod/ulab/code/numpy/approx.c
msgid "interp is defined for 1D iterables of equal length"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
#, c-format
msgid "interval must be in range %s-%s"
msgstr ""

#: py/compile.c
msgid "invalid architecture"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid bits_per_pixel %d, must be, 1, 2, 4, 8, 16, 24, or 32"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element size %d for bits_per_pixel %d\n"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element_size %d, must be, 1, 2, or 4"
msgstr ""

#: shared-bindings/traceback/__init__.c
msgid "invalid exception"
msgstr ""

#: extmod/modframebuf.c
msgid "invalid format"
msgstr ""

#: py/objstr.c
msgid "invalid format specifier"
msgstr ""

#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr ""

#: py/compile.c
msgid "invalid micropython decorator"
msgstr ""

#: ports/espressif/common-hal/esp32_camera/Camera.c
msgid "invalid setting"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr ""

#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr ""

#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr ""

#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr ""

#: py/parsenum.c
msgid "invalid syntax for number"
msgstr ""

#: py/objexcept.c
msgid "invalid traceback"
msgstr ""

#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""

#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "iterations did not converge"
msgstr ""

#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""

#: py/argcheck.c
msgid "keyword argument(s) not yet implemented - use normal args instead"
msgstr ""

#: py/bc.c
msgid "keywords must be strings"
msgstr ""

#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr ""

#: py/compile.c
msgid "label redefined"
msgstr ""

#: py/stream.c
msgid "length argument not allowed for this type"
msgstr ""

#: shared-bindings/audiomixer/MixerVoice.c
msgid "level must be between 0 and 1"
msgstr ""

#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr ""

#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr ""

#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr ""

#: py/vm.c
msgid "local variable referenced before assignment"
msgstr ""

#: py/objint.c
msgid "long int not supported in this build"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr ""

#: ports/espressif/common-hal/mdns/Server.c
msgid "mDNS already initialized"
msgstr ""

#: ports/espressif/common-hal/mdns/Server.c
msgid "mDNS only works with built-in WiFi"
msgstr ""

#: py/parse.c
msgid "malformed f-string"
msgstr ""

#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr ""

#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "matrix is not positive definite"
msgstr ""

#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is "
msgstr ""

#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter must be > 0"
msgstr ""

#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter should be > 0"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "median argument must be an ndarray"
msgstr ""

#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr ""

#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr ""

#: py/objarray.c
msgid "memoryview: length is not a multiple of itemsize"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "mode must be complete, or reduced"
msgstr ""

#: py/builtinimport.c
msgid "module not found"
msgstr ""

#: ports/espressif/common-hal/wifi/Monitor.c
msgid "monitor init failed"
msgstr ""

#: extmod/ulab/code/numpy/poly.c
msgid "more degrees of freedom than data points"
msgstr ""

#: py/compile.c
msgid "multiple *x in assignment"
msgstr ""

#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr ""

#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr ""

#: py/emitnative.c
msgid "must raise an object"
msgstr ""

#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr ""

#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""

#: py/runtime.c
msgid "name not defined"
msgstr ""

#: py/asmthumb.c
msgid "native method too big"
msgstr ""

#: py/emitnative.c
msgid "native yield"
msgstr ""

#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr ""

#: py/modmath.c
msgid "negative factorial"
msgstr ""

#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
msgstr ""

#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "no SD card"
msgstr ""

#: py/vm.c
msgid "no active exception to reraise"
msgstr ""

#: py/compile.c
msgid "no binding for nonlocal found"
msgstr ""

#: shared-module/msgpack/__init__.c
msgid "no default packer"
msgstr ""

#: extmod/modurandom.c
msgid "no default seed"
msgstr ""

#: py/builtinimport.c
msgid "no module named '%q'"
msgstr ""

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/paralleldisplay/ParallelBus.c
msgid "no reset pin available"
msgstr "нет доступного контакта сброса"

#: shared-module/sdcardio/SDCard.c
msgid "no response from SD card"
msgstr ""

#: ports/espressif/common-hal/esp32_camera/Camera.c py/objobject.c py/runtime.c
msgid "no such attribute"
msgstr ""

#: shared-bindings/usb_hid/__init__.c
msgid "non-Device in %q"
msgstr ""

#: ports/espressif/common-hal/_bleio/Connection.c
#: ports/nrf/common-hal/_bleio/Connection.c
msgid "non-UUID found in service_uuids_whitelist"
msgstr ""

#: py/compile.c
msgid "non-default argument follows default argument"
msgstr ""

#: extmod/modubinascii.c
msgid "non-hex digit found"
msgstr ""

#: py/compile.c
msgid "non-keyword arg after */**"
msgstr ""

#: py/compile.c
msgid "non-keyword arg after keyword arg"
msgstr ""

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "non-zero timeout must be > 0.01"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "non-zero timeout must be >= interval"
msgstr ""

#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""

#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr ""

#: py/objstr.c
msgid "not enough arguments for format string"
msgstr ""

#: extmod/ulab/code/numpy/carray/carray_tools.c
msgid "not implemented for complex dtype"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "number of points must be at least 2"
msgstr ""

#: py/builtinhelp.c
msgid "object "
msgstr ""

#: py/obj.c
#, c-format
msgid "object '%s' isn't a tuple or list"
msgstr ""

#: py/obj.c
msgid "object doesn't support item assignment"
msgstr ""

#: py/obj.c
msgid "object doesn't support item deletion"
msgstr ""

#: py/obj.c
msgid "object has no len"
msgstr ""

#: py/obj.c
msgid "object isn't subscriptable"
msgstr ""

#: py/runtime.c
msgid "object not an iterator"
msgstr ""

#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr ""

#: py/sequence.c shared-bindings/displayio/Group.c
msgid "object not in sequence"
msgstr ""

#: py/runtime.c
msgid "object not iterable"
msgstr ""

#: py/obj.c
#, c-format
msgid "object of type '%s' has no len()"
msgstr ""

#: py/obj.c
msgid "object with buffer protocol required"
msgstr ""

#: extmod/modubinascii.c
msgid "odd-length string"
msgstr ""

#: supervisor/shared/web_workflow/web_workflow.c
msgid "off"
msgstr ""

#: extmod/ulab/code/utils/utils.c
msgid "offset is too large"
msgstr ""

#: shared-bindings/dualbank/__init__.c
msgid "offset must be >= 0"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "offset must be non-negative and no greater than buffer length"
msgstr ""

#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr ""

#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only bit_depth=16 is supported"
msgstr ""

#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only sample_rate=16000 is supported"
msgstr ""

#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
#: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr ""

#: py/vm.c
msgid "opcode"
msgstr ""

#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/compare.c
#: extmod/ulab/code/numpy/vector.c
msgid "operands could not be broadcast together"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for 2D arrays only"
msgstr ""

#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for ndarrays only"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr ""

#: py/modbuiltins.c
msgid "ord expects a character"
msgstr ""

#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr ""

#: extmod/ulab/code/utils/utils.c
msgid "out array is too small"
msgstr ""

#: extmod/ulab/code/utils/utils.c
msgid "out must be a float dense array"
msgstr ""

#: shared-bindings/displayio/Bitmap.c
msgid "out of range of source"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "out of range of target"
msgstr ""

#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr ""

#: py/modstruct.c
#, c-format
msgid "pack expected %d items for packing (got %d)"
msgstr ""

#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "palette_index should be an int"
msgstr ""

#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr ""

#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "pixel coordinates out of bounds"
msgstr ""

#: shared-bindings/displayio/Bitmap.c
msgid "pixel value requires too many bits"
msgstr ""

#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
msgstr ""

#: extmod/vfs_posix_file.c
msgid "poll on file not available on win32"
msgstr ""

#: ports/espressif/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr ""

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c
#: shared-bindings/ps2io/Ps2.c
msgid "pop from empty %q"
msgstr ""

#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "port must be >= 0"
msgstr ""

#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr ""

#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr ""

#: ports/espressif/boards/adafruit_qtpy_esp32_pico/mpconfigboard.h
msgid "pressing BOOT button at start up.\n"
msgstr ""

#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
msgid "pressing SW38 button at start up.\n"
msgstr ""

#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
msgid "pressing VOLUME button at start up.\n"
msgstr ""

#: ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.h
#: ports/espressif/boards/beetle-esp32-c3/mpconfigboard.h
#: ports/espressif/boards/lolin_c3_mini/mpconfigboard.h
#: supervisor/shared/safe_mode.c
msgid "pressing boot button at start up.\n"
msgstr ""

#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
#: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h
#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
msgid "pressing both buttons at start up.\n"
msgstr ""

#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
msgid "pressing the left button at start up\n"
msgstr ""

#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "pull masks conflict with direction masks"
msgstr ""

#: extmod/modutimeq.c
msgid "queue overflow"
msgstr ""

#: py/parse.c
msgid "raw f-strings are not supported"
msgstr ""

#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "real and imaginary parts must be of equal length"
msgstr ""

#: py/builtinimport.c
msgid "relative import"
msgstr ""

#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr ""

#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""

#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""

#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr ""

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr "rgb_pins[%d] дублирует другое назначение пинов"

#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr "rgb_pins[%d] не находится на том же порту, что и clock"

#: extmod/ulab/code/numpy/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""

#: py/objstr.c
msgid "rsplit(None,n)"
msgstr ""

#: shared-bindings/audiocore/RawSample.c
msgid ""
"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
"'B'"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr ""

#: py/modmicropython.c
msgid "schedule queue full"
msgstr ""

#: py/builtinimport.c
msgid "script compilation not supported"
msgstr ""

#: py/nativeglue.c
msgid "set unsupported"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "shape must be a tuple"
msgstr ""

#: shared-module/msgpack/__init__.c
msgid "short read"
msgstr ""

#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr ""

#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr ""

#: py/objstr.c
msgid "single '}' encountered in format string"
msgstr ""

#: extmod/ulab/code/ulab_tools.c
msgid "size is defined for ndarrays only"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "slice step can't be zero"
msgstr ""

#: py/objslice.c
msgid "slice step cannot be zero"
msgstr ""

#: py/nativeglue.c
msgid "slice unsupported"
msgstr ""

#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr ""

#: main.c
msgid "soft reboot\n"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos[:, 3] should be all ones"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "sosfilt requires iterable arguments"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c
msgid "source palette too large"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 2 or 65536"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 65536"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 8"
msgstr ""

#: py/objstr.c
msgid "start/end indices"
msgstr ""

#: shared-bindings/displayio/Shape.c
msgid "start_x should be an int"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "step must be non-zero"
msgstr ""

#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr ""

#: py/stream.c shared-bindings/getpass/__init__.c
msgid "stream operation not supported"
msgstr ""

#: py/objstrunicode.c
msgid "string indices must be integers, not %q"
msgstr ""

#: py/stream.c
msgid "string not supported; use bytes or bytearray"
msgstr ""

#: extmod/moductypes.c
msgid "struct: can't index"
msgstr ""

#: extmod/moductypes.c
msgid "struct: index out of range"
msgstr ""

#: extmod/moductypes.c
msgid "struct: no fields"
msgstr ""

#: py/objarray.c py/objstr.c
msgid "substring not found"
msgstr ""

#: py/compile.c
msgid "super() can't find self"
msgstr ""

#: extmod/modujson.c
msgid "syntax error in JSON"
msgstr ""

#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr ""

#: shared-bindings/touchio/TouchIn.c
msgid "threshold must be in the range 0-65536"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "time.struct_time() takes a 9-sequence"
msgstr ""

#: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
#: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""

#: shared-bindings/busio/UART.c
msgid "timeout must be 0.0-100.0 seconds"
msgstr ""

#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "timeout must be < 655.35 secs"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v1 card"
msgstr ""

#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v2 card"
msgstr ""

#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "timer re-init"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""

#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr ""

#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/create.c
msgid "too many dimensions"
msgstr ""

#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr ""

#: py/asmthumb.c
msgid "too many locals for native method"
msgstr ""

#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr ""

#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""

#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D iterables"
msgstr ""

#: py/obj.c
msgid "tuple/list has wrong length"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""

#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
msgid "tx and rx cannot both be None"
msgstr ""

#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr ""

#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr ""

#: py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr ""

#: py/objgenerator.c
msgid "type object 'generator' has no attribute '__await__'"
msgstr ""

#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr ""

#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr ""

#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr ""

#: py/parse.c
msgid "unexpected indent"
msgstr ""

#: py/bc.c
msgid "unexpected keyword argument"
msgstr ""

#: py/bc.c py/objnamedtuple.c
msgid "unexpected keyword argument '%q'"
msgstr ""

#: py/lexer.c
msgid "unicode name escapes"
msgstr ""

#: py/parse.c
msgid "unindent doesn't match any outer indent level"
msgstr ""

#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr ""

#: py/objstr.c
msgid "unknown format code '%c' for object of type '%q'"
msgstr ""

#: py/compile.c
msgid "unknown type"
msgstr ""

#: py/compile.c
msgid "unknown type '%q'"
msgstr ""

#: py/objstr.c
msgid "unmatched '{' in format"
msgstr ""

#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr ""

#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
#: shared-module/vectorio/Polygon.c shared-module/vectorio/VectorShape.c
msgid "unsupported %q type"
msgstr ""

#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr ""

#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr ""

#: shared-module/gifio/GifWriter.c
msgid "unsupported colorspace for GifWriter"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "unsupported colorspace for dither"
msgstr ""

#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr ""

#: py/runtime.c
msgid "unsupported type for %q: '%q'"
msgstr ""

#: py/runtime.c
msgid "unsupported type for operator"
msgstr ""

#: py/runtime.c
msgid "unsupported types for %q: '%q', '%q'"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "usecols is too high"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "usecols keyword must be specified"
msgstr ""

#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr ""

#: shared-bindings/bitmaptools/__init__.c
msgid "value out of range of target"
msgstr ""

#: shared-bindings/displayio/Bitmap.c
msgid "value_count must be > 0"
msgstr ""

#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "watchdog not initialized"
msgstr ""

#: shared-bindings/watchdog/WatchDogTimer.c
msgid "watchdog timeout must be greater than 0"
msgstr ""

#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "width must be greater than zero"
msgstr ""

#: ports/espressif/common-hal/wifi/Radio.c
msgid "wifi is not enabled"
msgstr ""

#: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval"
msgstr ""

#: extmod/ulab/code/numpy/numerical.c
msgid "wrong axis index"
msgstr ""

#: extmod/ulab/code/numpy/create.c
msgid "wrong axis specified"
msgstr ""

#: extmod/ulab/code/numpy/io/io.c
msgid "wrong dtype"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "wrong index type"
msgstr ""

#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/create.c
#: extmod/ulab/code/numpy/io/io.c extmod/ulab/code/numpy/transform.c
#: extmod/ulab/code/numpy/vector.c
msgid "wrong input type"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of condition array"
msgstr ""

#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of index array"
msgstr ""

#: extmod/ulab/code/numpy/create.c py/objarray.c py/objstr.c
msgid "wrong number of arguments"
msgstr ""

#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr ""

#: extmod/ulab/code/numpy/vector.c
msgid "wrong output type"
msgstr ""

#: shared-module/displayio/Shape.c
msgid "x value out of bounds"
msgstr ""

#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "xTaskCreate failed"
msgstr ""

#: shared-bindings/displayio/Shape.c
msgid "y should be an int"
msgstr ""

#: shared-module/displayio/Shape.c
msgid "y value out of bounds"
msgstr ""

#: py/objrange.c
msgid "zero step"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be an ndarray"
msgstr ""

#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of float type"
msgstr "zi должно быть типа float"

#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of shape (n_section, 2)"
msgstr "zi должен иметь форму (n_section, 2)"

#~ msgid "Failed to init wifi"
#~ msgstr "Не удалось инициировать wifi"

#~ msgid "%q must be a tuple of length 2"
#~ msgstr "%q должен быть кортежем длинной 2"

#~ msgid "%q must be between %d and %d"
#~ msgstr "%q должен быть между %d и %d"

#~ msgid "%q should be an int"
#~ msgstr "%q должен быть int"

#~ msgid "(x,y) integers required"
#~ msgstr "Требуются целые числа (x,y)"

#~ msgid "Address type out of range"
#~ msgstr "Тип адреса вне диапазона"

#~ msgid "AnalogIn not supported on given pin"
#~ msgstr "AnalogIn не поддерживается на данном пине"

#~ msgid "AnalogOut functionality not supported"
#~ msgstr "Функциональность AnalogOut не поддерживается"

#~ msgid "AnalogOut is only 16 bits. Value must be less than 65536."
#~ msgstr "AnalogOut имеет только 16 бит. Значение должно быть меньше 65536."

#~ msgid "AnalogOut not supported on given pin"
#~ msgstr "AnalogOut не поддерживается на данном пине"

#, c-format
#~ msgid "Bit depth must be from 1 to 6 inclusive, not %d"
#~ msgstr "Битовая глубина должна быть от 1 до 6 включительно, а не %d"

#, c-format
#~ msgid "Buffer incorrect size. Should be %d bytes."
#~ msgstr "Неправильный размер буфера. Должен быть %d байт."

#~ msgid "Buffer must be at least length 1"
#~ msgstr "Буфер должен быть размером не менее 1"

#~ msgid "Bytes must be between 0 and 255."
#~ msgstr "Bytes должен быть в диапазоне от 0 до 255."

#~ msgid "Cannot output both channels on the same pin"
#~ msgstr "Невозможно вывести оба канала на один пин"

#~ msgid "Cannot read without MISO pin."
#~ msgstr "Считывание невозможно без пина MISO."

#~ msgid "Cannot reset into bootloader because no bootloader is present."
#~ msgstr "Невозможно перезагрузится в загрузчик так как он отсутствует."

#~ msgid "Cannot transfer without MOSI and MISO pins."
#~ msgstr "Передача данных невозможна без пинов MOSI и MISO."

#~ msgid "Cannot write without MOSI pin."
#~ msgstr "Запись невозможна без пина MOSI."

#~ msgid "Clock pin init failed."
#~ msgstr "Не удалось инициализировать пин Clock."

#~ msgid "Command must be an int between 0 and 255"
#~ msgstr "Команда должна быть целым числом (int) от 0 до 255"

#~ msgid "Could not initialize Camera"
#~ msgstr "Не удалось инициализировать камеру"

#~ msgid "Could not initialize GNSS"
#~ msgstr "Не удалось инициализировать GNSS"

#~ msgid "Could not initialize SDCard"
#~ msgstr "Не удалось инициализировать SD карту"

#~ msgid "Could not initialize UART"
#~ msgstr "Не удалось инициализировать UART"

#~ msgid "Could not re-init channel"
#~ msgstr "Не удалось повторно инициализировать канал"

#~ msgid "Could not re-init timer"
#~ msgstr "Не удалось повторно инициализировать таймер"

#~ msgid "Could not restart PWM"
#~ msgstr "Не удалось перезапустить ШИМ"

#~ msgid "Couldn't allocate first buffer"
#~ msgstr "Не удалось выделить первый буфер"

#~ msgid "Couldn't allocate input buffer"
#~ msgstr "Не удалось выделить входной буфер"

#~ msgid "Couldn't allocate second buffer"
#~ msgstr "Не удалось выделить второй буфер"

#~ msgid "DigitalInOut not supported on given pin"
#~ msgstr "DigitalInOut не поддерживается на данном пине"

#, c-format
#~ msgid "Expected tuple of length %d, got %d"
#~ msgstr "Ожидался кортеж длины %d, получен %d"

#~ msgid "Failed to allocate RX buffer"
#~ msgstr "Не удалось выделить буфер RX"

#, c-format
#~ msgid "Failed to allocate RX buffer of %d bytes"
#~ msgstr "Не удалось выделить буфер RX размером %d байт"

#, c-format
#~ msgid "Framebuffer requires %d bytes"
#~ msgstr "Фреймбуфер требует %d байт"

#~ msgid "Hostname must be between 1 and 253 characters"
#~ msgstr "Имя хоста должно содержать от 1 до 253 символов"

#~ msgid "I2C Init Error"
#~ msgstr "Ошибка инициализации I2C"

#~ msgid "Invalid %q pin selection"
#~ msgstr "Неверный выбор пина %q"

#~ msgid "Invalid AuthMode"
#~ msgstr "Недопустимый AuthMode"

#~ msgid "Invalid BMP file"
#~ msgstr "Неправилный файл BMP"

#~ msgid "Invalid DAC pin supplied"
#~ msgstr "Передан неверный пин ЦАП"

#~ msgid "Invalid MIDI file"
#~ msgstr "Неверный MIDI-файл"

#~ msgid "Invalid PWM frequency"
#~ msgstr "Недопустимая частота ШИМ"

#~ msgid "Invalid Pin"
#~ msgstr "Неверный пин"

#~ msgid "Invalid buffer size"
#~ msgstr "Неверный размер буфера"

#~ msgid "Invalid byteorder string"
#~ msgstr "Недействительная строка byteorder"

#~ msgid "Invalid capture period. Valid range: 1 - 500"
#~ msgstr "Неверный период захвата. Допустимый диапазон: 1 - 500"

#~ msgid "Invalid channel count"
#~ msgstr "Недействительное количество каналов"

#, c-format
#~ msgid "Invalid data_count %d"
#~ msgstr "Недействительный data_count %d"

#~ msgid "Invalid direction."
#~ msgstr "Неверное направление."

#~ msgid "Invalid file"
#~ msgstr "Неверный файл"

#~ msgid "Invalid number of bits"
#~ msgstr "Неверное количество бит"

#~ msgid "Invalid phase"
#~ msgstr "Неверная фаза"

#~ msgid "Invalid pin"
#~ msgstr "Недопустимый пин"

#~ msgid "Invalid pin for left channel"
#~ msgstr "Недопустимый пин для левого канала"

#~ msgid "Invalid pin for right channel"
#~ msgstr "Недопустимый пин для правого канала"

#~ msgid "Invalid polarity"
#~ msgstr "Неправильная полярность"

#~ msgid "Invalid properties"
#~ msgstr "Недопустимые свойства"

#~ msgid "Invalid run mode."
#~ msgstr "Неверный режим работы."

#~ msgid "Invalid security_mode"
#~ msgstr "Неверный security_mode"

#~ msgid "Invalid voice"
#~ msgstr "Неверный voice"

#~ msgid "Invalid voice count"
#~ msgstr "Неверный счетчик voice"

#~ msgid "Invalid wave file"
#~ msgstr "Неверный wave-файл"

#~ msgid "Invalid word/bit length"
#~ msgstr "Недопустимая длина слова/бита"

#~ msgid "Layer already in a group."
#~ msgstr "Слой уже в группе."

#~ msgid "Layer must be a Group or TileGrid subclass."
#~ msgstr "Слой должен быть группой (Group) или субклассом TileGrid."

#~ msgid "MISO pin init failed."
#~ msgstr "Не удалось инициализировать пин MISO."

#~ msgid "MOSI pin init failed."
#~ msgstr "Не удалось инициализировать пин MOSI."

#~ msgid "Messages limited to 8 bytes"
#~ msgstr "Сообщения ограничены 8 байтами"

#, c-format
#~ msgid "More than %d report ids not supported"
#~ msgstr "Не поддерживается более %d идентификаторов отчетов (report ids)"

#~ msgid "No hardware support on clk pin"
#~ msgstr "Отсутствует аппаратная поддержка пина clk"

#~ msgid "No hardware support on pin"
#~ msgstr "Отсутствует аппаратная поддержка на пине"

#~ msgid "Pin count must be at least 1"
#~ msgstr "Количество пинов должно быть не менее 1"

#~ msgid "Pin does not have ADC capabilities"
#~ msgstr "Пин не имеет возможности АЦП"

#~ msgid "Set pin count must be between 1 and 5"
#~ msgstr "Число Set пинов должно быть от 1 до 5"

#~ msgid ""
#~ "\n"
#~ "Code stopped by auto-reload.\n"
#~ msgstr ""
#~ "\n"
#~ "Программа остановлена автоматической перезагрузкой.\n"

#~ msgid "Brightness must be between 0 and 255"
#~ msgstr "Яркость должна быть в диапазоне от 0 до 255"

#, c-format
#~ msgid "No I2C device at address: %x"
#~ msgstr "Нет устройства I2C по адресу: %x"