1e9eaa7af5
Just another choice for the PHY interface. Added: Keyword option phy_clock=LAN.IN or LAN.OUT to define the source of the 50MHZ clock for the PHY interface. The RMII clock is not enabled if it is generated by a PYH board. Constants: LAN.IN The clock is provided by the PHY board. LAN.OUT The clock is provided by the MCU board. The default is LAN.OUT or the value set in mpconfigboard.h, which is currently set to IN only for the SEEED ARCH MIX board. Usage etc: lan = LAN(phy_type=LAN.PHY_DP83848, phy_clock=LAN.IN)
441 lines
15 KiB
C
441 lines
15 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Damien P. George
|
|
* Copyright (c) 2021 Robert Hammelrath
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <string.h>
|
|
#include "py/runtime.h"
|
|
#include "py/mphal.h"
|
|
#include "py/mperrno.h"
|
|
#include "ticks.h"
|
|
|
|
#if defined(MICROPY_HW_ETH_MDC)
|
|
|
|
#include "pin.h"
|
|
#include "shared/netutils/netutils.h"
|
|
#include "extmod/modnetwork.h"
|
|
|
|
#include "fsl_iomuxc.h"
|
|
#include "fsl_enet.h"
|
|
#include "fsl_phy.h"
|
|
#include "hal/phy/mdio/enet/fsl_enet_mdio.h"
|
|
#include "hal/phy/device/phyksz8081/fsl_phyksz8081.h"
|
|
#include "hal/phy/device/phydp83825/fsl_phydp83825.h"
|
|
#include "hal/phy/device/phylan8720/fsl_phylan8720.h"
|
|
|
|
#include "eth.h"
|
|
#include "lwip/etharp.h"
|
|
#include "lwip/dns.h"
|
|
#include "lwip/dhcp.h"
|
|
#include "netif/ethernet.h"
|
|
|
|
#include "ticks.h"
|
|
|
|
// Configuration values
|
|
enet_config_t enet_config;
|
|
phy_config_t phyConfig = {0};
|
|
|
|
// Prepare the buffer configuration.
|
|
|
|
#define ENET_RXBD_NUM (5)
|
|
#define ENET_TXBD_NUM (5)
|
|
|
|
AT_NONCACHEABLE_SECTION_ALIGN(enet_rx_bd_struct_t g_rxBuffDescrip[ENET_RXBD_NUM], ENET_BUFF_ALIGNMENT);
|
|
AT_NONCACHEABLE_SECTION_ALIGN(enet_tx_bd_struct_t g_txBuffDescrip[ENET_TXBD_NUM], ENET_BUFF_ALIGNMENT);
|
|
SDK_ALIGN(uint8_t g_rxDataBuff[ENET_RXBD_NUM][SDK_SIZEALIGN(ENET_FRAME_MAX_FRAMELEN, ENET_BUFF_ALIGNMENT)],
|
|
ENET_BUFF_ALIGNMENT);
|
|
SDK_ALIGN(uint8_t g_txDataBuff[ENET_TXBD_NUM][SDK_SIZEALIGN(ENET_FRAME_MAX_FRAMELEN, ENET_BUFF_ALIGNMENT)],
|
|
ENET_BUFF_ALIGNMENT);
|
|
|
|
// ENET Handles & Buffers
|
|
enet_handle_t g_handle;
|
|
|
|
static mdio_handle_t mdioHandle = {.ops = &enet_ops};
|
|
static phy_handle_t phyHandle = {.phyAddr = ENET_PHY_ADDRESS, .mdioHandle = &mdioHandle, .ops = &ENET_PHY_OPS};
|
|
|
|
enet_buffer_config_t buffConfig[] = {{
|
|
ENET_RXBD_NUM,
|
|
ENET_TXBD_NUM,
|
|
SDK_SIZEALIGN(ENET_FRAME_MAX_FRAMELEN, ENET_BUFF_ALIGNMENT),
|
|
SDK_SIZEALIGN(ENET_FRAME_MAX_FRAMELEN, ENET_BUFF_ALIGNMENT),
|
|
&g_rxBuffDescrip[0],
|
|
&g_txBuffDescrip[0],
|
|
&g_rxDataBuff[0][0],
|
|
&g_txDataBuff[0][0],
|
|
}};
|
|
|
|
static uint8_t hw_addr[6]; // The MAC address field
|
|
eth_t eth_instance;
|
|
|
|
#define PHY_INIT_TIMEOUT_MS (10000)
|
|
#define PHY_AUTONEGO_TIMEOUT_US (5000000)
|
|
|
|
typedef struct _eth_t {
|
|
uint32_t trace_flags;
|
|
struct netif netif;
|
|
struct dhcp dhcp_struct;
|
|
} eth_t;
|
|
|
|
typedef struct _iomux_table_t {
|
|
uint32_t muxRegister;
|
|
uint32_t muxMode;
|
|
uint32_t inputRegister;
|
|
uint32_t inputDaisy;
|
|
uint32_t configRegister;
|
|
uint32_t inputOnfield;
|
|
uint32_t configValue;
|
|
} iomux_table_t;
|
|
|
|
static const iomux_table_t iomux_table_enet[] = {
|
|
IOMUX_TABLE_ENET
|
|
};
|
|
|
|
#define IOTE (iomux_table_enet[i])
|
|
|
|
#define TRACE_ASYNC_EV (0x0001)
|
|
#define TRACE_ETH_TX (0x0002)
|
|
#define TRACE_ETH_RX (0x0004)
|
|
#define TRACE_ETH_FULL (0x0008)
|
|
|
|
|
|
STATIC void eth_trace(eth_t *self, size_t len, const void *data, unsigned int flags) {
|
|
if (((flags & NETUTILS_TRACE_IS_TX) && (self->trace_flags & TRACE_ETH_TX))
|
|
|| (!(flags & NETUTILS_TRACE_IS_TX) && (self->trace_flags & TRACE_ETH_RX))) {
|
|
const uint8_t *buf;
|
|
if (len == (size_t)-1) {
|
|
// data is a pbuf
|
|
const struct pbuf *pbuf = data;
|
|
buf = pbuf->payload;
|
|
len = pbuf->len; // restricted to print only the first chunk of the pbuf
|
|
} else {
|
|
// data is actual data buffer
|
|
buf = data;
|
|
}
|
|
if (self->trace_flags & TRACE_ETH_FULL) {
|
|
flags |= NETUTILS_TRACE_PAYLOAD;
|
|
}
|
|
netutils_ethernet_trace(MP_PYTHON_PRINTER, len, buf, flags);
|
|
}
|
|
}
|
|
|
|
STATIC void eth_process_frame(eth_t *self, uint8_t *buf, size_t length) {
|
|
|
|
struct netif *netif = &self->netif;
|
|
if (netif->flags & NETIF_FLAG_LINK_UP) {
|
|
struct pbuf *p = pbuf_alloc(PBUF_RAW, length, PBUF_POOL);
|
|
if (p != NULL) {
|
|
// Need to create a local copy first, since ENET_ReadFrame does not
|
|
// provide a pointer to the buffer.
|
|
pbuf_take(p, buf, length);
|
|
if (netif->input(p, netif) != ERR_OK) {
|
|
pbuf_free(p);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
void eth_irq_handler(ENET_Type *base, enet_handle_t *handle, enet_event_t event, void *userData) {
|
|
eth_t *self = (eth_t *)userData;
|
|
uint8_t g_rx_frame[ENET_FRAME_MAX_FRAMELEN + 14];
|
|
uint32_t length = 0;
|
|
status_t status;
|
|
|
|
if (event == kENET_RxEvent) {
|
|
do {
|
|
status = ENET_GetRxFrameSize(handle, &length);
|
|
if (status == kStatus_Success) {
|
|
// Get the data
|
|
ENET_ReadFrame(base, handle, g_rx_frame, length);
|
|
eth_process_frame(self, g_rx_frame, length);
|
|
} else if (status == kStatus_ENET_RxFrameError) {
|
|
ENET_ReadFrame(base, handle, NULL, 0);
|
|
}
|
|
} while (status != kStatus_ENET_RxFrameEmpty);
|
|
} else {
|
|
ENET_ClearInterruptStatus(base, kENET_TxFrameInterrupt);
|
|
}
|
|
}
|
|
|
|
// eth_init: Set up GPIO and the transceiver
|
|
void eth_init(eth_t *self, int mac_idx, const phy_operations_t *phy_ops, int phy_addr, bool phy_clock) {
|
|
|
|
self->netif.num = mac_idx; // Set the interface number
|
|
|
|
CLOCK_EnableClock(kCLOCK_Iomuxc);
|
|
|
|
gpio_pin_config_t gpio_config = {kGPIO_DigitalOutput, 0, kGPIO_NoIntmode};
|
|
(void)gpio_config;
|
|
|
|
#ifdef ENET_RESET_PIN
|
|
// Configure the Reset Pin
|
|
const machine_pin_obj_t *reset_pin = &ENET_RESET_PIN;
|
|
const machine_pin_af_obj_t *af_obj = pin_find_af(reset_pin, PIN_AF_MODE_ALT5);
|
|
|
|
IOMUXC_SetPinMux(reset_pin->muxRegister, af_obj->af_mode, 0, 0, reset_pin->configRegister, 0U);
|
|
IOMUXC_SetPinConfig(reset_pin->muxRegister, af_obj->af_mode, 0, 0, reset_pin->configRegister, 0xB0A9U);
|
|
GPIO_PinInit(reset_pin->gpio, reset_pin->pin, &gpio_config);
|
|
#endif
|
|
|
|
#ifdef ENET_INT_PIN
|
|
// Configure the Int Pin
|
|
const machine_pin_obj_t *int_pin = &ENET_INT_PIN;
|
|
af_obj = pin_find_af(int_pin, PIN_AF_MODE_ALT5);
|
|
|
|
IOMUXC_SetPinMux(int_pin->muxRegister, af_obj->af_mode, 0, 0, int_pin->configRegister, 0U);
|
|
IOMUXC_SetPinConfig(int_pin->muxRegister, af_obj->af_mode, 0, 0, int_pin->configRegister, 0xB0A9U);
|
|
GPIO_PinInit(int_pin->gpio, int_pin->pin, &gpio_config);
|
|
#endif
|
|
|
|
// Configure the Transceiver Pins, Settings except for CLK:
|
|
// Slew Rate Field: Fast Slew Rate, Drive Strength, R0/5, Speed max(200MHz)
|
|
// Open Drain Disabled, Pull Enabled, Pull 100K Ohm Pull Up
|
|
// Hysteresis Disabled
|
|
|
|
for (int i = 0; i < ARRAY_SIZE(iomux_table_enet); i++) {
|
|
IOMUXC_SetPinMux(IOTE.muxRegister, IOTE.muxMode, IOTE.inputRegister, IOTE.inputDaisy, IOTE.configRegister, IOTE.inputOnfield);
|
|
IOMUXC_SetPinConfig(IOTE.muxRegister, IOTE.muxMode, IOTE.inputRegister, IOTE.inputDaisy, IOTE.configRegister, IOTE.configValue);
|
|
}
|
|
|
|
const clock_enet_pll_config_t config = {
|
|
.enableClkOutput = phy_clock, .enableClkOutput25M = false, .loopDivider = 1
|
|
};
|
|
CLOCK_InitEnetPll(&config);
|
|
|
|
IOMUXC_EnableMode(IOMUXC_GPR, kIOMUXC_GPR_ENET1RefClkMode, false); // Do not use the 25 MHz MII clock
|
|
IOMUXC_EnableMode(IOMUXC_GPR, kIOMUXC_GPR_ENET1TxClkOutputDir, phy_clock); // Set the clock pad direction
|
|
|
|
// Reset transceiver
|
|
// pull up the ENET_INT before RESET.
|
|
#ifdef ENET_INT_PIN
|
|
GPIO_WritePinOutput(int_pin->gpio, int_pin->pin, 1);
|
|
#endif
|
|
|
|
#ifdef ENET_RESET_PIN
|
|
GPIO_WritePinOutput(reset_pin->gpio, reset_pin->pin, 0);
|
|
mp_hal_delay_us(1000);
|
|
GPIO_WritePinOutput(reset_pin->gpio, reset_pin->pin, 1);
|
|
mp_hal_delay_us(1000);
|
|
#endif
|
|
|
|
mp_hal_get_mac(0, hw_addr);
|
|
|
|
phyHandle.ops = phy_ops;
|
|
phyConfig.phyAddr = phy_addr;
|
|
phyConfig.autoNeg = true;
|
|
mdioHandle.resource.base = ENET;
|
|
mdioHandle.resource.csrClock_Hz = CLOCK_GetFreq(kCLOCK_IpgClk);
|
|
|
|
// Init the PHY interface & negotiate the speed
|
|
bool link = false;
|
|
bool autonego = false;
|
|
phy_speed_t speed = kENET_MiiSpeed100M;
|
|
phy_duplex_t duplex = kENET_MiiFullDuplex;
|
|
|
|
|
|
status_t status = PHY_Init(&phyHandle, &phyConfig);
|
|
if (status == kStatus_Success) {
|
|
if (phyConfig.autoNeg) {
|
|
uint64_t t = ticks_us64() + PHY_AUTONEGO_TIMEOUT_US;
|
|
// Wait for auto-negotiation success and link up
|
|
do {
|
|
PHY_GetAutoNegotiationStatus(&phyHandle, &autonego);
|
|
PHY_GetLinkStatus(&phyHandle, &link);
|
|
if (autonego && link) {
|
|
break;
|
|
}
|
|
} while (ticks_us64() < t);
|
|
if (!autonego) {
|
|
mp_raise_msg(&mp_type_OSError, MP_ERROR_TEXT("PHY Auto-negotiation failed."));
|
|
}
|
|
PHY_GetLinkSpeedDuplex(&phyHandle, &speed, &duplex);
|
|
} else {
|
|
PHY_SetLinkSpeedDuplex(&phyHandle, speed, duplex);
|
|
}
|
|
} else {
|
|
mp_raise_msg(&mp_type_OSError, MP_ERROR_TEXT("PHY Init failed."));
|
|
}
|
|
|
|
ENET_GetDefaultConfig(&enet_config);
|
|
enet_config.miiSpeed = (enet_mii_speed_t)speed;
|
|
enet_config.miiDuplex = (enet_mii_duplex_t)duplex;
|
|
enet_config.miiMode = kENET_RmiiMode;
|
|
// Enable checksum generation by the ENET controller
|
|
enet_config.txAccelerConfig = kENET_TxAccelIpCheckEnabled | kENET_TxAccelProtoCheckEnabled;
|
|
// Set interrupt
|
|
enet_config.interrupt |= ENET_TX_INTERRUPT | ENET_RX_INTERRUPT;
|
|
|
|
ENET_Init(ENET, &g_handle, &enet_config, &buffConfig[0], hw_addr, CLOCK_GetFreq(kCLOCK_IpgClk));
|
|
ENET_SetCallback(&g_handle, eth_irq_handler, (void *)self);
|
|
ENET_EnableInterrupts(ENET, ENET_RX_INTERRUPT);
|
|
ENET_ClearInterruptStatus(ENET, ENET_TX_INTERRUPT | ENET_RX_INTERRUPT | ENET_ERR_INTERRUPT);
|
|
ENET_ActiveRead(ENET);
|
|
}
|
|
|
|
// Initialize the phy interface
|
|
STATIC int eth_mac_init(eth_t *self) {
|
|
return 0;
|
|
}
|
|
|
|
// Deinit the interface
|
|
STATIC void eth_mac_deinit(eth_t *self) {
|
|
}
|
|
|
|
void eth_set_trace(eth_t *self, uint32_t value) {
|
|
self->trace_flags = value;
|
|
}
|
|
|
|
/*******************************************************************************/
|
|
// ETH-LwIP bindings
|
|
|
|
STATIC err_t eth_netif_output(struct netif *netif, struct pbuf *p) {
|
|
// This function should always be called from a context where PendSV-level IRQs are disabled
|
|
status_t status;
|
|
|
|
LINK_STATS_INC(link.xmit);
|
|
eth_trace(netif->state, (size_t)-1, p, NETUTILS_TRACE_IS_TX | NETUTILS_TRACE_NEWLINE);
|
|
|
|
if (p->next == NULL) {
|
|
status = ENET_SendFrame(ENET, &g_handle, p->payload, p->len);
|
|
} else {
|
|
// frame consists of several parts. Copy them together and send them
|
|
size_t length = 0;
|
|
uint8_t tx_frame[ENET_FRAME_MAX_FRAMELEN + 14];
|
|
|
|
while (p) {
|
|
memcpy(&tx_frame[length], p->payload, p->len);
|
|
length += p->len;
|
|
p = p->next;
|
|
}
|
|
status = ENET_SendFrame(ENET, &g_handle, tx_frame, length);
|
|
}
|
|
return status == kStatus_Success ? ERR_OK : ERR_BUF;
|
|
}
|
|
|
|
STATIC err_t eth_netif_init(struct netif *netif) {
|
|
netif->linkoutput = eth_netif_output;
|
|
netif->output = etharp_output;
|
|
netif->mtu = 1500;
|
|
netif->flags = NETIF_FLAG_BROADCAST | NETIF_FLAG_ETHARP | NETIF_FLAG_ETHERNET | NETIF_FLAG_IGMP;
|
|
// Checksums only need to be checked on incoming frames, not computed on outgoing frames
|
|
NETIF_SET_CHECKSUM_CTRL(netif,
|
|
NETIF_CHECKSUM_CHECK_IP
|
|
| NETIF_CHECKSUM_CHECK_UDP
|
|
| NETIF_CHECKSUM_CHECK_TCP
|
|
| NETIF_CHECKSUM_CHECK_ICMP
|
|
| NETIF_CHECKSUM_CHECK_ICMP6
|
|
);
|
|
return ERR_OK;
|
|
}
|
|
|
|
STATIC void eth_lwip_init(eth_t *self) {
|
|
ip_addr_t ipconfig[4];
|
|
IP4_ADDR(&ipconfig[0], 192, 168, 0, 2);
|
|
IP4_ADDR(&ipconfig[1], 255, 255, 255, 0);
|
|
IP4_ADDR(&ipconfig[2], 192, 168, 0, 1);
|
|
IP4_ADDR(&ipconfig[3], 8, 8, 8, 8);
|
|
|
|
self->netif.hwaddr_len = 6;
|
|
memcpy(self->netif.hwaddr, hw_addr, 6);
|
|
|
|
MICROPY_PY_LWIP_ENTER
|
|
|
|
struct netif *n = &self->netif;
|
|
n->name[0] = 'e';
|
|
n->name[1] = '0';
|
|
netif_add(n, &ipconfig[0], &ipconfig[1], &ipconfig[2], self, eth_netif_init, ethernet_input);
|
|
netif_set_hostname(n, "MPY");
|
|
netif_set_default(n);
|
|
netif_set_up(n);
|
|
|
|
dns_setserver(0, &ipconfig[3]);
|
|
dhcp_set_struct(n, &self->dhcp_struct);
|
|
dhcp_start(n);
|
|
|
|
netif_set_link_up(n);
|
|
|
|
MICROPY_PY_LWIP_EXIT
|
|
}
|
|
|
|
STATIC void eth_lwip_deinit(eth_t *self) {
|
|
MICROPY_PY_LWIP_ENTER
|
|
for (struct netif *netif = netif_list; netif != NULL; netif = netif->next) {
|
|
if (netif == &self->netif) {
|
|
netif_remove(netif);
|
|
netif->ip_addr.addr = 0;
|
|
netif->flags = 0;
|
|
}
|
|
}
|
|
MICROPY_PY_LWIP_EXIT
|
|
}
|
|
|
|
struct netif *eth_netif(eth_t *self) {
|
|
return &self->netif;
|
|
}
|
|
|
|
int eth_link_status(eth_t *self) {
|
|
struct netif *netif = &self->netif;
|
|
if ((netif->flags & (NETIF_FLAG_UP | NETIF_FLAG_LINK_UP))
|
|
== (NETIF_FLAG_UP | NETIF_FLAG_LINK_UP)) {
|
|
if (netif->ip_addr.addr != 0) {
|
|
return 3; // link up
|
|
} else {
|
|
return 2; // link no-ip;
|
|
}
|
|
} else {
|
|
bool link;
|
|
PHY_GetLinkStatus(&phyHandle, &link);
|
|
if (link) {
|
|
return 1; // link up
|
|
} else {
|
|
return 0; // link down
|
|
}
|
|
}
|
|
}
|
|
|
|
int eth_start(eth_t *self) {
|
|
eth_lwip_deinit(self);
|
|
|
|
// Make sure Eth is Not in low power mode.
|
|
eth_low_power_mode(self, false);
|
|
|
|
int ret = eth_mac_init(self);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
eth_lwip_init(self);
|
|
return 0;
|
|
}
|
|
|
|
int eth_stop(eth_t *self) {
|
|
eth_lwip_deinit(self);
|
|
eth_mac_deinit(self);
|
|
return 0;
|
|
}
|
|
|
|
void eth_low_power_mode(eth_t *self, bool enable) {
|
|
ENET_EnableSleepMode(ENET, enable);
|
|
}
|
|
#endif // defined(MICROPY_HW_ETH_MDC)
|