87f97e490c
- Configures `PLL2->PFD0` with **198MHz** as base clock of
`USDHCx` peripheral.
- Adds guards for SDCard related files via `MICROPY_PY_MACHINE_SDCARD`
- Adds creation of pin defines for SDCard to make-pins.py
- Adds new configuration option for SDCard peripheral pinout
to mpconfigport.h
- Adds interrupt handling support instead of polling
- Adds support for `ADMA2` powered data transfer
- Configures SDCard to run in HS (high-speed mode) with **50MHz** only!
SDCard support is optional and requires `USDHC` peripheral.
Thus this driver is not available on `MIMXRT1010_EVK`.
SDCard support is enabled by setting `MICROPY_PY_MACHINE_SDCARD = 1`
in mpconfigboard.mk.
Signed-off-by: Philipp Ebensberger
69 lines
2.5 KiB
C
69 lines
2.5 KiB
C
#define MICROPY_HW_BOARD_NAME "i.MX RT1060 EVK"
|
|
#define MICROPY_HW_MCU_NAME "MIMXRT1062DVJ6A"
|
|
|
|
#define BOARD_FLASH_SIZE (8 * 1024 * 1024)
|
|
|
|
// MIMXRT1060_EVK has 1 user LED
|
|
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_09)
|
|
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
|
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
|
#define BOARD_FLASH_CONFIG_HEADER_H "evkmimxrt1060_flexspi_nor_config.h"
|
|
#define BOARD_FLASH_OPS_HEADER_H "hal/flexspi_hyper_flash.h"
|
|
|
|
#define MICROPY_HW_NUM_PIN_IRQS (4 * 32 + 3)
|
|
|
|
// Define mapping logical UART # to hardware UART #
|
|
// LPUART3 on D0/D1 -> 1
|
|
// LPUART2 on D7/D6 -> 2
|
|
// LPUART6 on D8/D9 -> 3
|
|
// LPUART8 on A1/A0 -> 4
|
|
|
|
#define MICROPY_HW_UART_NUM (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
|
|
#define MICROPY_HW_UART_INDEX { 0, 3, 2, 6, 8 }
|
|
|
|
#define IOMUX_TABLE_UART \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_02_LPUART2_TX }, { IOMUXC_GPIO_AD_B1_03_LPUART2_RX }, \
|
|
{ IOMUXC_GPIO_AD_B1_06_LPUART3_TX }, { IOMUXC_GPIO_AD_B1_07_LPUART3_RX }, \
|
|
{ 0 }, { 0 }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B0_02_LPUART6_TX }, { IOMUXC_GPIO_AD_B0_03_LPUART6_RX }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_10_LPUART8_TX }, { IOMUXC_GPIO_AD_B1_11_LPUART8_RX },
|
|
|
|
#define MICROPY_HW_SPI_INDEX { 1 }
|
|
|
|
#define IOMUX_TABLE_SPI \
|
|
{ IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK }, { IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0 }, \
|
|
{ IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO }, { IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI },
|
|
|
|
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
|
|
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
|
|
|
|
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
|
|
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
|
|
|
|
// Define the mapping hardware I2C # to logical I2C #
|
|
// SDA/SCL HW-I2C Logical I2C
|
|
// D14/D15 LPI2C1 -> 0
|
|
// D1/D0 LPI2C3 -> 1
|
|
|
|
#define MICROPY_HW_I2C_INDEX { 1, 3 }
|
|
|
|
#define IOMUX_TABLE_I2C \
|
|
{ IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL }, { IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL }, { IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA },
|
|
|
|
#define USDHC_DUMMY_PIN NULL, 0
|
|
#define MICROPY_USDHC1 \
|
|
{ \
|
|
.cmd = {GPIO_SD_B0_00_USDHC1_CMD}, \
|
|
.clk = { GPIO_SD_B0_01_USDHC1_CLK }, \
|
|
.cd_b = { GPIO_B1_12_USDHC1_CD_B },\
|
|
.data0 = { GPIO_SD_B0_02_USDHC1_DATA0 },\
|
|
.data1 = { GPIO_SD_B0_03_USDHC1_DATA1 },\
|
|
.data2 = { GPIO_SD_B0_04_USDHC1_DATA2 },\
|
|
.data3 = { GPIO_SD_B0_05_USDHC1_DATA3 },\
|
|
}
|