circuitpython/shared-bindings/supervisor/__init__.c

/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2016-2017 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */
#include <string.h>

#include "py/obj.h"
#include "py/runtime.h"
#include "py/objstr.h"

#include "shared/runtime/interrupt_char.h"
#include "supervisor/shared/display.h"
#include "supervisor/shared/reload.h"
#include "supervisor/shared/traceback.h"
#include "supervisor/shared/translate/translate.h"
#include "supervisor/shared/workflow.h"

#if CIRCUITPY_USB_IDENTIFICATION
#include "supervisor/usb.h"
#endif

#include "shared-bindings/microcontroller/__init__.h"
#include "shared-bindings/supervisor/__init__.h"
#include "shared-bindings/time/__init__.h"
#include "shared-bindings/supervisor/Runtime.h"
#include "shared-bindings/supervisor/StatusBar.h"

//| """Supervisor settings"""

//| runtime: Runtime
//| """Runtime information, such as ``runtime.serial_connected``
//| (USB serial connection status).
//| This object is the sole instance of `supervisor.Runtime`."""

//| status_bar: StatusBar
//| """The status bar, shown on an attached display, and also sent to
//| an attached terminal via OSC escape codes over the REPL serial connection.
//| The status bar reports the current IP or BLE connection, what file is running,
//| the last exception name and location, and firmware version information.
//| This object is the sole instance of `supervisor.StatusBar`."""
//|

//| def reload() -> None:
//|     """Reload the main Python code and run it (equivalent to hitting Ctrl-D at the REPL)."""
//|     ...
//|
STATIC mp_obj_t supervisor_reload(void) {
    reload_initiate(RUN_REASON_SUPERVISOR_RELOAD);
    return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_0(supervisor_reload_obj, supervisor_reload);

//| def set_next_code_file(
//|     filename: Optional[str],
//|     *,
//|     reload_on_success: bool = False,
//|     reload_on_error: bool = False,
//|     sticky_on_success: bool = False,
//|     sticky_on_error: bool = False,
//|     sticky_on_reload: bool = False
//| ) -> None:
//|     """Set what file to run on the next vm run.
//|
//|     When not ``None``, the given ``filename`` is inserted at the front of the usual ['code.py',
//|     'main.py'] search sequence.
//|
//|     The optional keyword arguments specify what happens after the specified file has run:
//|
//|     ``sticky_on_…`` determine whether the newly set filename and options stay in effect: If
//|     True, further runs will continue to run that file (unless it says otherwise by calling
//|     ``set_next_code_filename()`` itself). If False, the settings will only affect one run and
//|     revert to the standard code.py/main.py afterwards.
//|
//|     ``reload_on_…`` determine how to continue: If False, wait in the usual "Code done running.
//|     Waiting for reload. / Press any key to enter the REPL. Use CTRL-D to reload." state. If
//|     True, reload immediately as if CTRL-D was pressed.
//|
//|     ``…_on_success`` take effect when the program runs to completion or calls ``sys.exit()``.
//|
//|     ``…_on_error`` take effect when the program exits with an exception, including the
//|     KeyboardInterrupt caused by CTRL-C.
//|
//|     ``…_on_reload`` take effect when the program is interrupted by files being written to the USB
//|     drive (auto-reload) or when it calls ``supervisor.reload()``.
//|
//|     These settings are stored in RAM, not in persistent memory, and will therefore only affect
//|     soft reloads. Powering off or resetting the device will always revert to standard settings.
//|
//|     When called multiple times in the same run, only the last call takes effect, replacing any
//|     settings made by previous ones. This is the main use of passing ``None`` as a filename: to
//|     reset to the standard search sequence."""
//|     ...
//|
STATIC mp_obj_t supervisor_set_next_code_file(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
    static const mp_arg_t allowed_args[] = {
        { MP_QSTR_filename, MP_ARG_REQUIRED | MP_ARG_OBJ, {.u_rom_obj = mp_const_none} },
        { MP_QSTR_reload_on_success, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
        { MP_QSTR_reload_on_error, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
        { MP_QSTR_sticky_on_success, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
        { MP_QSTR_sticky_on_error, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
        { MP_QSTR_sticky_on_reload, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} },
    };
    struct {
        mp_arg_val_t filename;
        mp_arg_val_t reload_on_success;
        mp_arg_val_t reload_on_error;
        mp_arg_val_t sticky_on_success;
        mp_arg_val_t sticky_on_error;
        mp_arg_val_t sticky_on_reload;
    } args;
    mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, (mp_arg_val_t *)&args);
    if (!mp_obj_is_str_or_bytes(args.filename.u_obj) && args.filename.u_obj != mp_const_none) {
        mp_raise_TypeError(translate("argument has wrong type"));
    }
    if (args.filename.u_obj == mp_const_none) {
        args.filename.u_obj = mp_const_empty_bytes;
    }
    uint8_t options = 0;
    if (args.reload_on_success.u_bool) {
        options |= SUPERVISOR_NEXT_CODE_OPT_RELOAD_ON_SUCCESS;
    }
    if (args.reload_on_error.u_bool) {
        options |= SUPERVISOR_NEXT_CODE_OPT_RELOAD_ON_ERROR;
    }
    if (args.sticky_on_success.u_bool) {
        options |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_SUCCESS;
    }
    if (args.sticky_on_error.u_bool) {
        options |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_ERROR;
    }
    if (args.sticky_on_reload.u_bool) {
        options |= SUPERVISOR_NEXT_CODE_OPT_STICKY_ON_RELOAD;
    }
    size_t len;
    const char *filename = mp_obj_str_get_data(args.filename.u_obj, &len);
    free_memory(next_code_allocation);
    if (options != 0 || len != 0) {
        next_code_allocation = allocate_memory(align32_size(sizeof(next_code_info_t) + len + 1), false, true);
        if (next_code_allocation == NULL) {
            m_malloc_fail(sizeof(next_code_info_t) + len + 1);
        }
        next_code_info_t *next_code = (next_code_info_t *)next_code_allocation->ptr;
        next_code->options = options | SUPERVISOR_NEXT_CODE_OPT_NEWLY_SET;
        memcpy(&next_code->filename, filename, len);
        next_code->filename[len] = '\0';
    } else {
        next_code_allocation = NULL;
    }
    return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_KW(supervisor_set_next_code_file_obj, 0, supervisor_set_next_code_file);

//| def ticks_ms() -> int:
//|     """Return the time in milliseconds since an unspecified reference point, wrapping after 2**29ms.
//|
//|     The value is initialized so that the first overflow occurs about 65
//|     seconds after power-on, making it feasible to check that your program
//|     works properly around an overflow.
//|
//|     The wrap value was chosen so that it is always possible to add
//|     or subtract two `ticks_ms` values without overflow on a board without
//|     long ints (or without allocating any long integer objects, on boards with
//|     long ints).
//|
//|     This ticks value comes from a low-accuracy clock internal to the
//|     microcontroller, just like `time.monotonic`.  Due to its low accuracy
//|     and the fact that it "wraps around" every few days, it is intended
//|     for working with short term events like advancing an LED animation,
//|     not for long term events like counting down the time until a holiday.
//|
//|     Addition, subtraction, and comparison of ticks values can be done
//|     with routines like the following::
//|
//|         _TICKS_PERIOD = const(1<<29)
//|         _TICKS_MAX = const(_TICKS_PERIOD-1)
//|         _TICKS_HALFPERIOD = const(_TICKS_PERIOD//2)
//|
//|         def ticks_add(ticks, delta):
//|             "Add a delta to a base number of ticks, performing wraparound at 2**29ms."
//|             return (ticks + delta) % _TICKS_PERIOD
//|
//|         def ticks_diff(ticks1, ticks2):
//|             "Compute the signed difference between two ticks values, assuming that they are within 2**28 ticks"
//|             diff = (ticks1 - ticks2) & _TICKS_MAX
//|             diff = ((diff + _TICKS_HALFPERIOD) & _TICKS_MAX) - _TICKS_HALFPERIOD
//|             return diff
//|
//|         def ticks_less(ticks1, ticks2):
//|             "Return true iff ticks1 is less than ticks2, assuming that they are within 2**28 ticks"
//|             return ticks_diff(ticks1, ticks2) < 0
//|
//|     """
//|     ...
//|
mp_obj_t supervisor_ticks_ms(void) {
    uint64_t ticks_ms = common_hal_time_monotonic_ms();
    return mp_obj_new_int((ticks_ms + 0x1fff0000) % (1 << 29));
}
MP_DEFINE_CONST_FUN_OBJ_0(supervisor_ticks_ms_obj, supervisor_ticks_ms);

//| def get_previous_traceback() -> Optional[str]:
//|     """If the last vm run ended with an exception (including the KeyboardInterrupt caused by
//|     CTRL-C), returns the traceback as a string.
//|     Otherwise, returns ``None``.
//|
//|     An exception traceback is only preserved over a soft reload, a hard reset clears it.
//|
//|     Only code (main or boot) runs are considered, not REPL runs."""
//|     ...
//|
STATIC mp_obj_t supervisor_get_previous_traceback(void) {
    if (prev_traceback_allocation) {
        size_t len = strlen((const char *)prev_traceback_allocation->ptr);
        if (len > 0) {
            mp_obj_str_t *o = m_new_obj(mp_obj_str_t);
            o->base.type = &mp_type_str;
            o->len = len;
            // callers probably aren't going to compare this string, so skip computing the hash
            o->hash = 0;
            o->data = (const byte *)prev_traceback_allocation->ptr;
            return MP_OBJ_FROM_PTR(o);
        }
    }
    return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_0(supervisor_get_previous_traceback_obj, supervisor_get_previous_traceback);

//| def reset_terminal(x_pixels: int, y_pixels: int) -> None:
//|     """Reset the CircuitPython serial terminal with new dimensions."""
//|     ...
//|
STATIC mp_obj_t supervisor_reset_terminal(mp_obj_t x_pixels, mp_obj_t y_pixels) {
    #if CIRCUITPY_DISPLAYIO
    supervisor_stop_terminal();
    supervisor_start_terminal(mp_obj_get_int(x_pixels), mp_obj_get_int(y_pixels));
    #else
    mp_raise_NotImplementedError(NULL);
    #endif
    return mp_const_none;
}
MP_DEFINE_CONST_FUN_OBJ_2(supervisor_reset_terminal_obj, supervisor_reset_terminal);

//| def set_usb_identification(
//|     manufacturer: Optional[str] = None,
//|     product: Optional[str] = None,
//|     vid: int = -1,
//|     pid: int = -1,
//| ) -> None:
//|     """Override identification constants in the USB Device Descriptor.
//|
//|     If passed, `manufacturer` and `product` must be ASCII strings (or buffers) of at most 126
//|     characters. Any omitted arguments will be left at their default values.
//|
//|     This method must be called in boot.py to have any effect.
//|
//|     Not available on boards without native USB support.
//|     """
//|     ...
//|
STATIC mp_obj_t supervisor_set_usb_identification(size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
    #if CIRCUITPY_USB_IDENTIFICATION
    static const mp_arg_t allowed_args[] = {
        { MP_QSTR_manufacturer, MP_ARG_OBJ, {.u_rom_obj = mp_const_none} },
        { MP_QSTR_product, MP_ARG_OBJ, {.u_rom_obj = mp_const_none} },
        { MP_QSTR_vid, MP_ARG_INT, {.u_int = -1} },
        { MP_QSTR_pid, MP_ARG_INT, {.u_int = -1} },
    };
    struct {
        mp_arg_val_t manufacturer;
        mp_arg_val_t product;
        mp_arg_val_t vid;
        mp_arg_val_t pid;
    } args;
    mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, (mp_arg_val_t *)&args);

    if (!usb_identification_allocation) {
        usb_identification_allocation = allocate_memory(sizeof(usb_identification_t), false, true);
    }
    usb_identification_t *identification = (usb_identification_t *)usb_identification_allocation->ptr;

    mp_arg_validate_int_range(args.vid.u_int, -1, (1 << 16) - 1, MP_QSTR_vid);
    mp_arg_validate_int_range(args.pid.u_int, -1, (1 << 16) - 1, MP_QSTR_pid);

    identification->vid = args.vid.u_int > -1 ? args.vid.u_int : USB_VID;
    identification->pid = args.pid.u_int > -1 ? args.pid.u_int : USB_PID;

    mp_buffer_info_t info;
    if (args.manufacturer.u_obj != mp_const_none) {
        mp_get_buffer_raise(args.manufacturer.u_obj, &info, MP_BUFFER_READ);
        mp_arg_validate_length_range(info.len, 0, 126, MP_QSTR_manufacturer);
        memcpy(identification->manufacturer_name, info.buf, info.len);
        identification->manufacturer_name[info.len] = 0;
    } else {
        strcpy(identification->manufacturer_name, USB_MANUFACTURER);
    }

    if (args.product.u_obj != mp_const_none) {
        mp_get_buffer_raise(args.product.u_obj, &info, MP_BUFFER_READ);
        mp_arg_validate_length_range(info.len, 0, 126, MP_QSTR_product);
        memcpy(identification->product_name, info.buf, info.len);
        identification->product_name[info.len] = 0;
    } else {
        strcpy(identification->product_name, USB_PRODUCT);
    }

    return mp_const_none;
    #else
    mp_raise_NotImplementedError(NULL);
    #endif
}
MP_DEFINE_CONST_FUN_OBJ_KW(supervisor_set_usb_identification_obj, 0, supervisor_set_usb_identification);

STATIC const mp_rom_map_elem_t supervisor_module_globals_table[] = {
    { MP_ROM_QSTR(MP_QSTR___name__), MP_ROM_QSTR(MP_QSTR_supervisor) },
    { MP_ROM_QSTR(MP_QSTR_runtime),  MP_ROM_PTR(&common_hal_supervisor_runtime_obj) },
    { MP_ROM_QSTR(MP_QSTR_reload),  MP_ROM_PTR(&supervisor_reload_obj) },
    { MP_ROM_QSTR(MP_QSTR_RunReason),  MP_ROM_PTR(&supervisor_run_reason_type) },
    #if CIRCUITPY_SAFEMODE_PY
    { MP_ROM_QSTR(MP_QSTR_SafeModeReason),  MP_ROM_PTR(&supervisor_safe_mode_reason_type) },
    #else
    { MP_ROM_QSTR(MP_QSTR_SafeModeReason),  MP_ROM_NONE },
    #endif
    { MP_ROM_QSTR(MP_QSTR_set_next_code_file),  MP_ROM_PTR(&supervisor_set_next_code_file_obj) },
    { MP_ROM_QSTR(MP_QSTR_ticks_ms),  MP_ROM_PTR(&supervisor_ticks_ms_obj) },
    { MP_ROM_QSTR(MP_QSTR_get_previous_traceback),  MP_ROM_PTR(&supervisor_get_previous_traceback_obj) },
    { MP_ROM_QSTR(MP_QSTR_reset_terminal),  MP_ROM_PTR(&supervisor_reset_terminal_obj) },
    { MP_ROM_QSTR(MP_QSTR_set_usb_identification),  MP_ROM_PTR(&supervisor_set_usb_identification_obj) },
    { MP_ROM_QSTR(MP_QSTR_status_bar),  MP_ROM_PTR(&shared_module_supervisor_status_bar_obj) },
};

STATIC MP_DEFINE_CONST_DICT(supervisor_module_globals, supervisor_module_globals_table);

const mp_obj_module_t supervisor_module = {
    .base = { &mp_type_module },
    .globals = (mp_obj_dict_t *)&supervisor_module_globals,
};

MP_REGISTER_MODULE(MP_QSTR_supervisor, supervisor_module, CIRCUITPY_SUPERVISOR);