circuitpython/ports/esp32/mphalport.c
Damien George e4650125b8 esp32: Update port to support IDF v5.0.2.
This commit updates the esp32 port to work exclusively with ESP-IDF v5.
IDF v5 is needed for some of the newer ESP32 SoCs to work, and it also
cleans up a lot of the inconsistencies between existing SoCs (eg S2, S3,
and C3).

Support for IDF v4 is dropped because it's a lot of effort to maintain both
versions at the same time.

The following components have been verified to work on the various SoCs:

                ESP32     ESP32-S2  ESP32-S3  ESP32-C3
    build       pass      pass      pass      pass
    SPIRAM      pass      pass      pass      N/A
    REPL (UART) pass      pass      pass      pass
    REPL (USB)  N/A       pass      pass      N/A
    filesystem  pass      pass      pass      pass
    GPIO        pass      pass      pass      pass
    SPI         pass      pass      pass      pass
    I2C         pass      pass      pass      pass
    PWM         pass      pass      pass      pass
    ADC         pass      pass      pass      pass
    WiFi STA    pass      pass      pass      pass
    WiFi AP     pass      pass      pass      pass
    BLE         pass      N/A       pass      pass
    ETH         pass      --        --        --
    PPP         pass      pass      pass      --
    sockets     pass      pass      pass      pass
    SSL         pass      ENOMEM    pass      pass
    RMT         pass      pass      pass      pass
    NeoPixel    pass      pass      pass      pass
    I2S         pass      pass      pass      N/A
    ESPNow      pass      pass      pass      pass
    ULP-FSM     pass      pass      pass      N/A
    SDCard      pass      N/A       N/A       pass
    WDT         pass      pass      pass      pass

Signed-off-by: Damien George <damien@micropython.org>
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2023-06-23 15:34:22 +10:00

205 lines
6.1 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* Development of the code in this file was sponsored by Microbric Pty Ltd
*
* The MIT License (MIT)
*
* Copyright (c) 2014 Damien P. George
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <stdio.h>
#include <string.h>
#include <sys/time.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "esp_timer.h"
#include "py/obj.h"
#include "py/objstr.h"
#include "py/stream.h"
#include "py/mpstate.h"
#include "py/mphal.h"
#include "extmod/misc.h"
#include "shared/timeutils/timeutils.h"
#include "shared/runtime/pyexec.h"
#include "mphalport.h"
#include "usb.h"
#include "usb_serial_jtag.h"
#include "uart.h"
TaskHandle_t mp_main_task_handle;
STATIC uint8_t stdin_ringbuf_array[260];
ringbuf_t stdin_ringbuf = {stdin_ringbuf_array, sizeof(stdin_ringbuf_array), 0, 0};
// Check the ESP-IDF error code and raise an OSError if it's not ESP_OK.
void check_esp_err(esp_err_t code) {
if (code != ESP_OK) {
// map esp-idf error code to posix error code
uint32_t pcode = -code;
switch (code) {
case ESP_ERR_NO_MEM:
pcode = MP_ENOMEM;
break;
case ESP_ERR_TIMEOUT:
pcode = MP_ETIMEDOUT;
break;
case ESP_ERR_NOT_SUPPORTED:
pcode = MP_EOPNOTSUPP;
break;
}
// construct string object
mp_obj_str_t *o_str = m_new_obj_maybe(mp_obj_str_t);
if (o_str == NULL) {
mp_raise_OSError(pcode);
return;
}
o_str->base.type = &mp_type_str;
o_str->data = (const byte *)esp_err_to_name(code); // esp_err_to_name ret's ptr to const str
o_str->len = strlen((char *)o_str->data);
o_str->hash = qstr_compute_hash(o_str->data, o_str->len);
// raise
mp_obj_t args[2] = { MP_OBJ_NEW_SMALL_INT(pcode), MP_OBJ_FROM_PTR(o_str)};
nlr_raise(mp_obj_exception_make_new(&mp_type_OSError, 2, 0, args));
}
}
uintptr_t mp_hal_stdio_poll(uintptr_t poll_flags) {
uintptr_t ret = 0;
if ((poll_flags & MP_STREAM_POLL_RD) && stdin_ringbuf.iget != stdin_ringbuf.iput) {
ret |= MP_STREAM_POLL_RD;
}
if (poll_flags & MP_STREAM_POLL_WR) {
ret |= MP_STREAM_POLL_WR;
}
return ret;
}
int mp_hal_stdin_rx_chr(void) {
for (;;) {
int c = ringbuf_get(&stdin_ringbuf);
if (c != -1) {
return c;
}
MICROPY_EVENT_POLL_HOOK
}
}
void mp_hal_stdout_tx_strn(const char *str, size_t len) {
// Only release the GIL if many characters are being sent
bool release_gil = len > 20;
if (release_gil) {
MP_THREAD_GIL_EXIT();
}
#if CONFIG_USB_OTG_SUPPORTED
usb_tx_strn(str, len);
#elif CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
usb_serial_jtag_tx_strn(str, len);
#endif
#if MICROPY_HW_ENABLE_UART_REPL
uart_stdout_tx_strn(str, len);
#endif
if (release_gil) {
MP_THREAD_GIL_ENTER();
}
mp_os_dupterm_tx_strn(str, len);
}
uint32_t mp_hal_ticks_ms(void) {
return esp_timer_get_time() / 1000;
}
uint32_t mp_hal_ticks_us(void) {
return esp_timer_get_time();
}
void mp_hal_delay_ms(uint32_t ms) {
uint64_t us = (uint64_t)ms * 1000ULL;
uint64_t dt;
uint64_t t0 = esp_timer_get_time();
for (;;) {
mp_handle_pending(true);
MICROPY_PY_SOCKET_EVENTS_HANDLER
MP_THREAD_GIL_EXIT();
uint64_t t1 = esp_timer_get_time();
dt = t1 - t0;
if (dt + portTICK_PERIOD_MS * 1000ULL >= us) {
// doing a vTaskDelay would take us beyond requested delay time
taskYIELD();
MP_THREAD_GIL_ENTER();
t1 = esp_timer_get_time();
dt = t1 - t0;
break;
} else {
ulTaskNotifyTake(pdFALSE, 1);
MP_THREAD_GIL_ENTER();
}
}
if (dt < us) {
// do the remaining delay accurately
mp_hal_delay_us(us - dt);
}
}
void mp_hal_delay_us(uint32_t us) {
// these constants are tested for a 240MHz clock
const uint32_t this_overhead = 5;
const uint32_t pend_overhead = 150;
// return if requested delay is less than calling overhead
if (us < this_overhead) {
return;
}
us -= this_overhead;
uint64_t t0 = esp_timer_get_time();
for (;;) {
uint64_t dt = esp_timer_get_time() - t0;
if (dt >= us) {
return;
}
if (dt + pend_overhead < us) {
// we have enough time to service pending events
// (don't use MICROPY_EVENT_POLL_HOOK because it also yields)
mp_handle_pending(true);
}
}
}
uint64_t mp_hal_time_ns(void) {
struct timeval tv;
gettimeofday(&tv, NULL);
uint64_t ns = tv.tv_sec * 1000000000ULL;
ns += (uint64_t)tv.tv_usec * 1000ULL;
return ns;
}
// Wake up the main task if it is sleeping
void mp_hal_wake_main_task_from_isr(void) {
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
vTaskNotifyGiveFromISR(mp_main_task_handle, &xHigherPriorityTaskWoken);
if (xHigherPriorityTaskWoken == pdTRUE) {
portYIELD_FROM_ISR();
}
}