826 lines
33 KiB
C
826 lines
33 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32l4xx_hal_pwr_ex.h
|
|
* @author MCD Application Team
|
|
* @version V1.3.0
|
|
* @date 29-January-2016
|
|
* @brief Header file of PWR HAL Extended module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32L4xx_HAL_PWR_EX_H
|
|
#define __STM32L4xx_HAL_PWR_EX_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32l4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32L4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx
|
|
* @{
|
|
*/
|
|
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
|
|
/** @defgroup PWREx_Exported_Types PWR Extended Exported Types
|
|
* @{
|
|
*/
|
|
|
|
|
|
/**
|
|
* @brief PWR PVM configuration structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t PVMType; /*!< PVMType: Specifies which voltage is monitored and against which threshold.
|
|
This parameter can be a value of @ref PWREx_PVM_Type.
|
|
@arg @ref PWR_PVM_1 Peripheral Voltage Monitoring 1 enable: VDDUSB versus 1.2 V (applicable when USB feature is supported).
|
|
@arg @ref PWR_PVM_2 Peripheral Voltage Monitoring 2 enable: VDDIO2 versus 0.9 V (applicable when VDDIO2 is present on device).
|
|
@arg @ref PWR_PVM_3 Peripheral Voltage Monitoring 3 enable: VDDA versus 1.62 V.
|
|
@arg @ref PWR_PVM_4 Peripheral Voltage Monitoring 4 enable: VDDA versus 2.2 V. */
|
|
|
|
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
|
|
This parameter can be a value of @ref PWREx_PVM_Mode. */
|
|
}PWR_PVMTypeDef;
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
|
|
/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup PWREx_WUP_Polarity Shift to apply to retrieve polarity information from PWR_WAKEUP_PINy_xxx constants
|
|
* @{
|
|
*/
|
|
#define PWR_WUP_POLARITY_SHIFT 0x05 /*!< Internal constant used to retrieve wakeup pin polariry */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup PWREx_WakeUp_Pins PWR wake-up pins
|
|
* @{
|
|
*/
|
|
#define PWR_WAKEUP_PIN1 PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN2 PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN3 PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN4 PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN5 PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN1_HIGH PWR_CR3_EWUP1 /*!< Wakeup pin 1 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN2_HIGH PWR_CR3_EWUP2 /*!< Wakeup pin 2 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN3_HIGH PWR_CR3_EWUP3 /*!< Wakeup pin 3 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN4_HIGH PWR_CR3_EWUP4 /*!< Wakeup pin 4 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN5_HIGH PWR_CR3_EWUP5 /*!< Wakeup pin 5 (with high level polarity) */
|
|
#define PWR_WAKEUP_PIN1_LOW (uint32_t)((PWR_CR4_WP1<<PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP1) /*!< Wakeup pin 1 (with low level polarity) */
|
|
#define PWR_WAKEUP_PIN2_LOW (uint32_t)((PWR_CR4_WP2<<PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP2) /*!< Wakeup pin 2 (with low level polarity) */
|
|
#define PWR_WAKEUP_PIN3_LOW (uint32_t)((PWR_CR4_WP3<<PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP3) /*!< Wakeup pin 3 (with low level polarity) */
|
|
#define PWR_WAKEUP_PIN4_LOW (uint32_t)((PWR_CR4_WP4<<PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP4) /*!< Wakeup pin 4 (with low level polarity) */
|
|
#define PWR_WAKEUP_PIN5_LOW (uint32_t)((PWR_CR4_WP5<<PWR_WUP_POLARITY_SHIFT) | PWR_CR3_EWUP5) /*!< Wakeup pin 5 (with low level polarity) */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_PVM_Type Peripheral Voltage Monitoring type
|
|
* @{
|
|
*/
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
#define PWR_PVM_1 PWR_CR2_PVME1 /*!< Peripheral Voltage Monitoring 1 enable: VDDUSB versus 1.2 V (applicable when USB feature is supported) */
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
#define PWR_PVM_2 PWR_CR2_PVME2 /*!< Peripheral Voltage Monitoring 2 enable: VDDIO2 versus 0.9 V (applicable when VDDIO2 is present on device) */
|
|
#define PWR_PVM_3 PWR_CR2_PVME3 /*!< Peripheral Voltage Monitoring 3 enable: VDDA versus 1.62 V */
|
|
#define PWR_PVM_4 PWR_CR2_PVME4 /*!< Peripheral Voltage Monitoring 4 enable: VDDA versus 2.2 V */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_PVM_Mode PWR PVM interrupt and event mode
|
|
* @{
|
|
*/
|
|
#define PWR_PVM_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
|
|
#define PWR_PVM_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
|
|
#define PWR_PVM_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
|
|
#define PWR_PVM_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
|
|
#define PWR_PVM_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
|
|
#define PWR_PVM_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
|
|
#define PWR_PVM_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
|
|
/** @defgroup PWREx_Regulator_Voltage_Scale PWR Regulator voltage scale
|
|
* @{
|
|
*/
|
|
#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR1_VOS_0 /*!< Voltage scaling range 1 */
|
|
#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR1_VOS_1 /*!< Voltage scaling range 2 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup PWREx_VBAT_Battery_Charging_Selection PWR battery charging resistor selection
|
|
* @{
|
|
*/
|
|
#define PWR_BATTERY_CHARGING_RESISTOR_5 ((uint32_t)0x00000000) /*!< VBAT charging through a 5 kOhms resistor */
|
|
#define PWR_BATTERY_CHARGING_RESISTOR_1_5 PWR_CR4_VBRS /*!< VBAT charging through a 1.5 kOhms resistor */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_VBAT_Battery_Charging PWR battery charging
|
|
* @{
|
|
*/
|
|
#define PWR_BATTERY_CHARGING_DISABLE ((uint32_t)0x00000000)
|
|
#define PWR_BATTERY_CHARGING_ENABLE PWR_CR4_VBE
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_GPIO_Bit_Number GPIO bit number for I/O setting in standby/shutdown mode
|
|
* @{
|
|
*/
|
|
#define PWR_GPIO_BIT_0 PWR_PUCRA_PA0 /*!< GPIO port I/O pin 0 */
|
|
#define PWR_GPIO_BIT_1 PWR_PUCRA_PA1 /*!< GPIO port I/O pin 1 */
|
|
#define PWR_GPIO_BIT_2 PWR_PUCRA_PA2 /*!< GPIO port I/O pin 2 */
|
|
#define PWR_GPIO_BIT_3 PWR_PUCRA_PA3 /*!< GPIO port I/O pin 3 */
|
|
#define PWR_GPIO_BIT_4 PWR_PUCRA_PA4 /*!< GPIO port I/O pin 4 */
|
|
#define PWR_GPIO_BIT_5 PWR_PUCRA_PA5 /*!< GPIO port I/O pin 5 */
|
|
#define PWR_GPIO_BIT_6 PWR_PUCRA_PA6 /*!< GPIO port I/O pin 6 */
|
|
#define PWR_GPIO_BIT_7 PWR_PUCRA_PA7 /*!< GPIO port I/O pin 7 */
|
|
#define PWR_GPIO_BIT_8 PWR_PUCRA_PA8 /*!< GPIO port I/O pin 8 */
|
|
#define PWR_GPIO_BIT_9 PWR_PUCRA_PA9 /*!< GPIO port I/O pin 9 */
|
|
#define PWR_GPIO_BIT_10 PWR_PUCRA_PA10 /*!< GPIO port I/O pin 10 */
|
|
#define PWR_GPIO_BIT_11 PWR_PUCRA_PA11 /*!< GPIO port I/O pin 11 */
|
|
#define PWR_GPIO_BIT_12 PWR_PUCRA_PA12 /*!< GPIO port I/O pin 12 */
|
|
#define PWR_GPIO_BIT_13 PWR_PUCRA_PA13 /*!< GPIO port I/O pin 13 */
|
|
#define PWR_GPIO_BIT_14 PWR_PDCRA_PA14 /*!< GPIO port I/O pin 14 */
|
|
#define PWR_GPIO_BIT_15 PWR_PUCRA_PA15 /*!< GPIO port I/O pin 15 */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_GPIO GPIO port
|
|
* @{
|
|
*/
|
|
#define PWR_GPIO_A 0x00000000 /*!< GPIO port A */
|
|
#define PWR_GPIO_B 0x00000001 /*!< GPIO port B */
|
|
#define PWR_GPIO_C 0x00000002 /*!< GPIO port C */
|
|
#define PWR_GPIO_D 0x00000003 /*!< GPIO port D */
|
|
#define PWR_GPIO_E 0x00000004 /*!< GPIO port E */
|
|
#define PWR_GPIO_F 0x00000005 /*!< GPIO port F */
|
|
#define PWR_GPIO_G 0x00000006 /*!< GPIO port G */
|
|
#define PWR_GPIO_H 0x00000007 /*!< GPIO port H */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_PVM_EXTI_LINE PWR PVM external interrupts lines
|
|
* @{
|
|
*/
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
#define PWR_EXTI_LINE_PVM1 ((uint32_t)0x00000008) /*!< External interrupt line 35 Connected to the PVM1 EXTI Line */
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
#define PWR_EXTI_LINE_PVM2 ((uint32_t)0x00000010) /*!< External interrupt line 36 Connected to the PVM2 EXTI Line */
|
|
#define PWR_EXTI_LINE_PVM3 ((uint32_t)0x00000020) /*!< External interrupt line 37 Connected to the PVM3 EXTI Line */
|
|
#define PWR_EXTI_LINE_PVM4 ((uint32_t)0x00000040) /*!< External interrupt line 38 Connected to the PVM4 EXTI Line */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_PVM_EVENT_LINE PWR PVM event lines
|
|
* @{
|
|
*/
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
#define PWR_EVENT_LINE_PVM1 ((uint32_t)0x00000008) /*!< Event line 35 Connected to the PVM1 EXTI Line */
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
#define PWR_EVENT_LINE_PVM2 ((uint32_t)0x00000010) /*!< Event line 36 Connected to the PVM2 EXTI Line */
|
|
#define PWR_EVENT_LINE_PVM3 ((uint32_t)0x00000020) /*!< Event line 37 Connected to the PVM3 EXTI Line */
|
|
#define PWR_EVENT_LINE_PVM4 ((uint32_t)0x00000040) /*!< Event line 38 Connected to the PVM4 EXTI Line */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup PWREx_Flag PWR Status Flags
|
|
* Elements values convention: 0000 0000 0XXY YYYYb
|
|
* - Y YYYY : Flag position in the XX register (5 bits)
|
|
* - XX : Status register (2 bits)
|
|
* - 01: SR1 register
|
|
* - 10: SR2 register
|
|
* The only exception is PWR_FLAG_WU, encompassing all
|
|
* wake-up flags and set to PWR_SR1_WUF.
|
|
* @{
|
|
*/
|
|
#define PWR_FLAG_WUF1 ((uint32_t)0x0020) /*!< Wakeup event on wakeup pin 1 */
|
|
#define PWR_FLAG_WUF2 ((uint32_t)0x0021) /*!< Wakeup event on wakeup pin 2 */
|
|
#define PWR_FLAG_WUF3 ((uint32_t)0x0022) /*!< Wakeup event on wakeup pin 3 */
|
|
#define PWR_FLAG_WUF4 ((uint32_t)0x0023) /*!< Wakeup event on wakeup pin 4 */
|
|
#define PWR_FLAG_WUF5 ((uint32_t)0x0024) /*!< Wakeup event on wakeup pin 5 */
|
|
#define PWR_FLAG_WU PWR_SR1_WUF /*!< Encompass wakeup event on all wakeup pins */
|
|
#define PWR_FLAG_SB ((uint32_t)0x0028) /*!< Standby flag */
|
|
#define PWR_FLAG_WUFI ((uint32_t)0x002F) /*!< Wakeup on internal wakeup line */
|
|
|
|
#define PWR_FLAG_REGLPS ((uint32_t)0x0048) /*!< Low-power regulator start flag */
|
|
#define PWR_FLAG_REGLPF ((uint32_t)0x0049) /*!< Low-power regulator flag */
|
|
#define PWR_FLAG_VOSF ((uint32_t)0x004A) /*!< Voltage scaling flag */
|
|
#define PWR_FLAG_PVDO ((uint32_t)0x004B) /*!< Power Voltage Detector output flag */
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
#define PWR_FLAG_PVMO1 ((uint32_t)0x004C) /*!< Power Voltage Monitoring 1 output flag */
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
#define PWR_FLAG_PVMO2 ((uint32_t)0x004D) /*!< Power Voltage Monitoring 2 output flag */
|
|
#define PWR_FLAG_PVMO3 ((uint32_t)0x004E) /*!< Power Voltage Monitoring 3 output flag */
|
|
#define PWR_FLAG_PVMO4 ((uint32_t)0x004F) /*!< Power Voltage Monitoring 4 output flag */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macros -----------------------------------------------------------*/
|
|
/** @defgroup PWREx_Exported_Macros PWR Extended Exported Macros
|
|
* @{
|
|
*/
|
|
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
/**
|
|
* @brief Enable the PVM1 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Disable the PVM1 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Enable the PVM1 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Disable the PVM1 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Enable the PVM1 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Disable the PVM1 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Enable the PVM1 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
|
|
/**
|
|
* @brief Disable the PVM1 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
|
|
/**
|
|
* @brief PVM1 EXTI line configuration: set rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_ENABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM1_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM1_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the PVM1 Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_DISABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM1_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM1_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Check whether the specified PVM1 EXTI interrupt flag is set or not.
|
|
* @retval EXTI PVM1 Line Status.
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM1)
|
|
|
|
/**
|
|
* @brief Clear the PVM1 EXTI flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM1_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM1)
|
|
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
|
|
|
|
/**
|
|
* @brief Enable the PVM2 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Disable the PVM2 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Enable the PVM2 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Disable the PVM2 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Enable the PVM2 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Disable the PVM2 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Enable the PVM2 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
|
|
/**
|
|
* @brief Disable the PVM2 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
|
|
/**
|
|
* @brief PVM2 EXTI line configuration: set rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_ENABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM2_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM2_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the PVM2 Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_DISABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM2_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM2_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Check whether the specified PVM2 EXTI interrupt flag is set or not.
|
|
* @retval EXTI PVM2 Line Status.
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM2)
|
|
|
|
/**
|
|
* @brief Clear the PVM2 EXTI flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM2_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM2)
|
|
|
|
|
|
|
|
/**
|
|
* @brief Enable the PVM3 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Disable the PVM3 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Enable the PVM3 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Disable the PVM3 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Enable the PVM3 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Disable the PVM3 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Enable the PVM3 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
|
|
/**
|
|
* @brief Disable the PVM3 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
|
|
/**
|
|
* @brief PVM3 EXTI line configuration: set rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_ENABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM3_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM3_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the PVM3 Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_DISABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM3_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM3_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Check whether the specified PVM3 EXTI interrupt flag is set or not.
|
|
* @retval EXTI PVM3 Line Status.
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM3)
|
|
|
|
/**
|
|
* @brief Clear the PVM3 EXTI flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM3_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM3)
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @brief Enable the PVM4 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Disable the PVM4 Extended Interrupt Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Enable the PVM4 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Disable the PVM4 Event Line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR2, PWR_EVENT_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Enable the PVM4 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Disable the PVM4 Extended Interrupt Rising Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Enable the PVM4 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
|
|
/**
|
|
* @brief Disable the PVM4 Extended Interrupt Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
|
|
/**
|
|
* @brief PVM4 EXTI line configuration: set rising & falling edge trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_ENABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM4_EXTI_ENABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM4_EXTI_ENABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Disable the PVM4 Extended Interrupt Rising & Falling Trigger.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_DISABLE_RISING_FALLING_EDGE() \
|
|
do { \
|
|
__HAL_PWR_PVM4_EXTI_DISABLE_RISING_EDGE(); \
|
|
__HAL_PWR_PVM4_EXTI_DISABLE_FALLING_EDGE(); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @brief Generate a Software interrupt on selected EXTI line.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER2, PWR_EXTI_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Check whether or not the specified PVM4 EXTI interrupt flag is set.
|
|
* @retval EXTI PVM4 Line Status.
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_GET_FLAG() (EXTI->PR2 & PWR_EXTI_LINE_PVM4)
|
|
|
|
/**
|
|
* @brief Clear the PVM4 EXTI flag.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_PVM4_EXTI_CLEAR_FLAG() WRITE_REG(EXTI->PR2, PWR_EXTI_LINE_PVM4)
|
|
|
|
|
|
/**
|
|
* @brief Configure the main internal regulator output voltage.
|
|
* @param __REGULATOR__: specifies the regulator output voltage to achieve
|
|
* a tradeoff between performance and power consumption.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref PWR_REGULATOR_VOLTAGE_SCALE1 Regulator voltage output range 1 mode,
|
|
* typical output voltage at 1.2 V,
|
|
* system frequency up to 80 MHz.
|
|
* @arg @ref PWR_REGULATOR_VOLTAGE_SCALE2 Regulator voltage output range 2 mode,
|
|
* typical output voltage at 1.0 V,
|
|
* system frequency up to 26 MHz.
|
|
* @note This macro is similar to HAL_PWREx_ControlVoltageScaling() API but doesn't check
|
|
* whether or not VOSF flag is cleared when moving from range 2 to range 1. User
|
|
* may resort to __HAL_PWR_GET_FLAG() macro to check VOSF bit resetting.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \
|
|
__IO uint32_t tmpreg; \
|
|
MODIFY_REG(PWR->CR1, PWR_CR1_VOS, (__REGULATOR__)); \
|
|
/* Delay after an RCC peripheral clock enabling */ \
|
|
tmpreg = READ_BIT(PWR->CR1, PWR_CR1_VOS); \
|
|
UNUSED(tmpreg); \
|
|
} while(0)
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macros --------------------------------------------------------*/
|
|
/** @addtogroup PWREx_Private_Macros PWR Extended Private Macros
|
|
* @{
|
|
*/
|
|
|
|
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
|
|
((PIN) == PWR_WAKEUP_PIN2) || \
|
|
((PIN) == PWR_WAKEUP_PIN3) || \
|
|
((PIN) == PWR_WAKEUP_PIN4) || \
|
|
((PIN) == PWR_WAKEUP_PIN5) || \
|
|
((PIN) == PWR_WAKEUP_PIN1_HIGH) || \
|
|
((PIN) == PWR_WAKEUP_PIN2_HIGH) || \
|
|
((PIN) == PWR_WAKEUP_PIN3_HIGH) || \
|
|
((PIN) == PWR_WAKEUP_PIN4_HIGH) || \
|
|
((PIN) == PWR_WAKEUP_PIN5_HIGH) || \
|
|
((PIN) == PWR_WAKEUP_PIN1_LOW) || \
|
|
((PIN) == PWR_WAKEUP_PIN2_LOW) || \
|
|
((PIN) == PWR_WAKEUP_PIN3_LOW) || \
|
|
((PIN) == PWR_WAKEUP_PIN4_LOW) || \
|
|
((PIN) == PWR_WAKEUP_PIN5_LOW))
|
|
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_1) ||\
|
|
((TYPE) == PWR_PVM_2) ||\
|
|
((TYPE) == PWR_PVM_3) ||\
|
|
((TYPE) == PWR_PVM_4))
|
|
#elif defined (STM32L471xx)
|
|
#define IS_PWR_PVM_TYPE(TYPE) (((TYPE) == PWR_PVM_2) ||\
|
|
((TYPE) == PWR_PVM_3) ||\
|
|
((TYPE) == PWR_PVM_4))
|
|
#endif
|
|
|
|
#define IS_PWR_PVM_MODE(MODE) (((MODE) == PWR_PVM_MODE_NORMAL) ||\
|
|
((MODE) == PWR_PVM_MODE_IT_RISING) ||\
|
|
((MODE) == PWR_PVM_MODE_IT_FALLING) ||\
|
|
((MODE) == PWR_PVM_MODE_IT_RISING_FALLING) ||\
|
|
((MODE) == PWR_PVM_MODE_EVENT_RISING) ||\
|
|
((MODE) == PWR_PVM_MODE_EVENT_FALLING) ||\
|
|
((MODE) == PWR_PVM_MODE_EVENT_RISING_FALLING))
|
|
|
|
#define IS_PWR_VOLTAGE_SCALING_RANGE(RANGE) (((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
|
|
((RANGE) == PWR_REGULATOR_VOLTAGE_SCALE2))
|
|
|
|
#define IS_PWR_BATTERY_RESISTOR_SELECT(RESISTOR) (((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_5) ||\
|
|
((RESISTOR) == PWR_BATTERY_CHARGING_RESISTOR_1_5))
|
|
|
|
#define IS_PWR_BATTERY_CHARGING(CHARGING) (((CHARGING) == PWR_BATTERY_CHARGING_DISABLE) ||\
|
|
((CHARGING) == PWR_BATTERY_CHARGING_ENABLE))
|
|
|
|
#define IS_PWR_GPIO_BIT_NUMBER(BIT_NUMBER) (((BIT_NUMBER) & GPIO_PIN_MASK) != (uint32_t)0x00)
|
|
|
|
|
|
#define IS_PWR_GPIO(GPIO) (((GPIO) == PWR_GPIO_A) ||\
|
|
((GPIO) == PWR_GPIO_B) ||\
|
|
((GPIO) == PWR_GPIO_C) ||\
|
|
((GPIO) == PWR_GPIO_D) ||\
|
|
((GPIO) == PWR_GPIO_E) ||\
|
|
((GPIO) == PWR_GPIO_F) ||\
|
|
((GPIO) == PWR_GPIO_G) ||\
|
|
((GPIO) == PWR_GPIO_H))
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup PWREx_Exported_Functions_Group1 Extended Peripheral Control functions
|
|
* @{
|
|
*/
|
|
|
|
|
|
/* Peripheral Control functions **********************************************/
|
|
uint32_t HAL_PWREx_GetVoltageRange(void);
|
|
HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling);
|
|
void HAL_PWREx_EnableBatteryCharging(uint32_t ResistorSelection);
|
|
void HAL_PWREx_DisableBatteryCharging(void);
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
void HAL_PWREx_EnableVddUSB(void);
|
|
void HAL_PWREx_DisableVddUSB(void);
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
void HAL_PWREx_EnableVddIO2(void);
|
|
void HAL_PWREx_DisableVddIO2(void);
|
|
void HAL_PWREx_EnableInternalWakeUpLine(void);
|
|
void HAL_PWREx_DisableInternalWakeUpLine(void);
|
|
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber);
|
|
HAL_StatusTypeDef HAL_PWREx_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber);
|
|
void HAL_PWREx_EnablePullUpPullDownConfig(void);
|
|
void HAL_PWREx_DisablePullUpPullDownConfig(void);
|
|
void HAL_PWREx_EnableSRAM2ContentRetention(void);
|
|
void HAL_PWREx_DisableSRAM2ContentRetention(void);
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
void HAL_PWREx_EnablePVM1(void);
|
|
void HAL_PWREx_DisablePVM1(void);
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
void HAL_PWREx_EnablePVM2(void);
|
|
void HAL_PWREx_DisablePVM2(void);
|
|
void HAL_PWREx_EnablePVM3(void);
|
|
void HAL_PWREx_DisablePVM3(void);
|
|
void HAL_PWREx_EnablePVM4(void);
|
|
void HAL_PWREx_DisablePVM4(void);
|
|
HAL_StatusTypeDef HAL_PWREx_ConfigPVM(PWR_PVMTypeDef *sConfigPVM);
|
|
|
|
|
|
/* Low Power modes configuration functions ************************************/
|
|
void HAL_PWREx_EnableLowPowerRunMode(void);
|
|
HAL_StatusTypeDef HAL_PWREx_DisableLowPowerRunMode(void);
|
|
void HAL_PWREx_EnterSTOP0Mode(uint8_t STOPEntry);
|
|
void HAL_PWREx_EnterSTOP1Mode(uint8_t STOPEntry);
|
|
void HAL_PWREx_EnterSTOP2Mode(uint8_t STOPEntry);
|
|
void HAL_PWREx_EnterSHUTDOWNMode(void);
|
|
|
|
void HAL_PWREx_PVD_PVM_IRQHandler(void);
|
|
#if defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx)
|
|
void HAL_PWREx_PVM1Callback(void);
|
|
#endif /* defined (STM32L475xx) || defined (STM32L476xx) || defined (STM32L485xx) || defined (STM32L486xx) */
|
|
void HAL_PWREx_PVM2Callback(void);
|
|
void HAL_PWREx_PVM3Callback(void);
|
|
void HAL_PWREx_PVM4Callback(void);
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
|
|
#endif /* __STM32L4xx_HAL_PWR_EX_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|