circuitpython/cc3200/hal/inc/hw_hib3p3.h

1139 lines
52 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

//*****************************************************************************
//
// Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
//
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************
#ifndef __HW_HIB3P3_H__
#define __HW_HIB3P3_H__
//*****************************************************************************
//
// The following are defines for the HIB3P3 register offsets.
//
//*****************************************************************************
#define HIB3P3_O_MEM_HIB_REQ 0x00000000
#define HIB3P3_O_MEM_HIB_RTC_TIMER_ENABLE \
0x00000004
#define HIB3P3_O_MEM_HIB_RTC_TIMER_RESET \
0x00000008
#define HIB3P3_O_MEM_HIB_RTC_TIMER_READ \
0x0000000C
#define HIB3P3_O_MEM_HIB_RTC_TIMER_LSW \
0x00000010
#define HIB3P3_O_MEM_HIB_RTC_TIMER_MSW \
0x00000014
#define HIB3P3_O_MEM_HIB_RTC_WAKE_EN \
0x00000018
#define HIB3P3_O_MEM_HIB_RTC_WAKE_LSW_CONF \
0x0000001C
#define HIB3P3_O_MEM_HIB_RTC_WAKE_MSW_CONF \
0x00000020
#define HIB3P3_O_MEM_INT_OSC_CONF \
0x0000002C
#define HIB3P3_O_MEM_XTAL_OSC_CONF \
0x00000034
#define HIB3P3_O_MEM_BGAP_PARAMETERS0 \
0x00000038
#define HIB3P3_O_MEM_BGAP_PARAMETERS1 \
0x0000003C
#define HIB3P3_O_MEM_HIB_DETECTION_STATUS \
0x00000040
#define HIB3P3_O_MEM_HIB_MISC_CONTROLS \
0x00000044
#define HIB3P3_O_MEM_HIB_CONFIG 0x00000050
#define HIB3P3_O_MEM_HIB_RTC_IRQ_ENABLE \
0x00000054
#define HIB3P3_O_MEM_HIB_RTC_IRQ_LSW_CONF \
0x00000058
#define HIB3P3_O_MEM_HIB_RTC_IRQ_MSW_CONF \
0x0000005C
#define HIB3P3_O_MEM_HIB_UART_CONF \
0x00000400
#define HIB3P3_O_MEM_GPIO_WAKE_EN \
0x00000404
#define HIB3P3_O_MEM_GPIO_WAKE_CONF \
0x00000408
#define HIB3P3_O_MEM_PAD_OEN_RET33_CONF \
0x0000040C
#define HIB3P3_O_MEM_UART_RTS_OEN_RET33_CONF \
0x00000410
#define HIB3P3_O_MEM_JTAG_CONF 0x00000414
#define HIB3P3_O_MEM_HIB_REG0 0x00000418
#define HIB3P3_O_MEM_HIB_REG1 0x0000041C
#define HIB3P3_O_MEM_HIB_REG2 0x00000420
#define HIB3P3_O_MEM_HIB_REG3 0x00000424
#define HIB3P3_O_MEM_HIB_SEQUENCER_CFG0 \
0x0000045C
#define HIB3P3_O_MEM_HIB_SEQUENCER_CFG1 \
0x00000460
#define HIB3P3_O_MEM_HIB_MISC_CONFIG \
0x00000464
#define HIB3P3_O_MEM_HIB_WAKE_STATUS \
0x00000468
#define HIB3P3_O_MEM_HIB_LPDS_GPIO_SEL \
0x0000046C
#define HIB3P3_O_MEM_HIB_SEQUENCER_CFG2 \
0x00000470
#define HIB3P3_O_HIBANA_SPARE_LOWV \
0x00000474
#define HIB3P3_O_HIB_TMUX_CTRL 0x00000478
#define HIB3P3_O_HIB_1P2_1P8_LDO_TRIM \
0x0000047C
#define HIB3P3_O_HIB_COMP_TRIM 0x00000480
#define HIB3P3_O_HIB_EN_TS 0x00000484
#define HIB3P3_O_HIB_1P8V_DET_EN \
0x00000488
#define HIB3P3_O_HIB_VBAT_MON_EN \
0x0000048C
#define HIB3P3_O_HIB_NHIB_ENABLE \
0x00000490
#define HIB3P3_O_HIB_UART_RTS_SW_ENABLE \
0x00000494
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REQ register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REQ_reserved_M \
0xFFFFFE00
#define HIB3P3_MEM_HIB_REQ_reserved_S 9
#define HIB3P3_MEM_HIB_REQ_NU1_M \
0x000001FC
#define HIB3P3_MEM_HIB_REQ_NU1_S 2
#define HIB3P3_MEM_HIB_REQ_mem_hib_clk_disable \
0x00000002 // 1 - Specifies that the Hiberante
// mode is without clocks ; 0 -
// Specified that the Hibernate mode
// is with clocks This register will
// be reset during Hibernate
// -WO-Clks mode (but not during
// Hibernate-W-Clks mode).
#define HIB3P3_MEM_HIB_REQ_mem_hib_req \
0x00000001 // 1 - Request for hibernate mode
// (This is an auto-clear bit) ; 0 -
// Donot request for hibernate mode
// This register will be reset
// during Hibernate -WO-Clks mode
// (but not during Hibernate-W-Clks
// mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_ENABLE register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_ENABLE_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_TIMER_ENABLE_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_TIMER_ENABLE_mem_hib_rtc_timer_enable \
0x00000001 // 1 - Enable the RTC timer to
// start running ; 0 - Keep the RTC
// timer disabled This register will
// be reset during Hibernate
// -WO-Clks mode (but not during
// Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_RESET register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_RESET_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_TIMER_RESET_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_TIMER_RESET_mem_hib_rtc_timer_reset \
0x00000001 // 1 - Reset the RTC timer ; 0 -
// Donot reset the RTC timer. This
// is an auto-clear bit. This
// register will be reset during
// Hibernate -WO-Clks mode (but not
// during Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_READ register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_READ_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_TIMER_READ_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_TIMER_READ_mem_hib_rtc_timer_read \
0x00000001 // 1 - Latch the running RTC timer
// into local registers. After
// programming this bit to 1, the
// F/w can read the latched RTC
// timer values from
// MEM_HIB_RTC_TIMER_LSW and
// MEM_HIB_RTC_TIMER_MSW. Before the
// F/w (APPS or NWP) wants to read
// the RTC-Timer, it has to program
// this bit to 1, then only read the
// MSW and LSW values. This is an
// auto-clear bit. This register
// will be reset during Hibernate
// -WO-Clks mode (but not during
// Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_LSW register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_LSW_hib_rtc_timer_lsw_M \
0xFFFFFFFF // Lower 32b value of the latched
// RTC-Timer.
#define HIB3P3_MEM_HIB_RTC_TIMER_LSW_hib_rtc_timer_lsw_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_TIMER_MSW register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_reserved_S 16
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_hib_rtc_timer_msw_M \
0x0000FFFF // Upper 32b value of the latched
// RTC-Timer.
#define HIB3P3_MEM_HIB_RTC_TIMER_MSW_hib_rtc_timer_msw_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_WAKE_EN register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_WAKE_EN_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_RTC_WAKE_EN_reserved_S 1
#define HIB3P3_MEM_HIB_RTC_WAKE_EN_mem_hib_rtc_wake_en \
0x00000001 // 1 - Enable the RTC timer based
// wakeup during Hibernate mode ; 0
// - Disable the RTC timer based
// wakeup during Hibernate mode This
// register will be reset during
// Hibernate-WO-Clks mode (but not
// during Hibernate-W-Clks mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_WAKE_LSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_WAKE_LSW_CONF_mem_hib_rtc_wake_lsw_conf_M \
0xFFFFFFFF // Configuration for RTC-Timer
// Wakeup (Lower 32b word)
#define HIB3P3_MEM_HIB_RTC_WAKE_LSW_CONF_mem_hib_rtc_wake_lsw_conf_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_WAKE_MSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_reserved_S 16
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_mem_hib_rtc_wake_msw_conf_M \
0x0000FFFF // Configuration for RTC-Timer
// Wakeup (Upper 16b word)
#define HIB3P3_MEM_HIB_RTC_WAKE_MSW_CONF_mem_hib_rtc_wake_msw_conf_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_INT_OSC_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_INT_OSC_CONF_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_INT_OSC_CONF_reserved_S 16
#define HIB3P3_MEM_INT_OSC_CONF_cm_clk_good_32k_int \
0x00008000 // 1 - Internal 32kHz Oscillator is
// valid ; 0 - Internal 32k
// oscillator clk is not valid
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_spare_M \
0x00007E00
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_spare_S 9
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_en_intosc_32k_override_ctrl \
0x00000100 // When 1, the INT_32K_OSC_EN comes
// from bit [0] of this register,
// else comes from the FSM. This
// register will be reset during
// Hibernate-WO-Clks mode (but not
// during Hibernate-W-Clks mode)
#define HIB3P3_MEM_INT_OSC_CONF_NU1 \
0x00000080
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_trim_M \
0x0000007E
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_intosc_32k_trim_S 1
#define HIB3P3_MEM_INT_OSC_CONF_mem_cm_en_intosc_32k \
0x00000001 // Override value for INT_OSC_EN.
// Applicable only when bit [3] of
// this register is set to 1.
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_XTAL_OSC_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_XTAL_OSC_CONF_reserved_M \
0xFFF00000
#define HIB3P3_MEM_XTAL_OSC_CONF_reserved_S 20
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_sli_32k_override_ctrl \
0x00080000 // When 1, the SLICER_EN comes from
// bit [10] of this register, else
// comes from the FSM.
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_xtal_32k_override_ctrl \
0x00040000 // When 1, the XTAL_EN comes from
// bit [0] of this register, else
// comes from the FSM.
#define HIB3P3_MEM_XTAL_OSC_CONF_cm_clk_good_xtal \
0x00020000 // 1 - XTAL Clk is good ; 0 - XTAL
// Clk is yet to be valid.
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_xtal_trim_M \
0x0001F800
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_xtal_trim_S 11
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_sli_32k \
0x00000400 // SLICER_EN Override value :
// Applicable only when bit [19] of
// this register is set to 1.
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_sli_32k_trim_M \
0x00000380
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_sli_32k_trim_S 7
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_fref_32k_slicer_itrim_M \
0x00000070
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_fref_32k_slicer_itrim_S 4
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_fref_32k_slicer \
0x00000008
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_input_sense_M \
0x00000006
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_input_sense_S 1
#define HIB3P3_MEM_XTAL_OSC_CONF_mem_cm_en_xtal_32k \
0x00000001 // XTAL_EN Override value :
// Applicable only when bit [18] of
// this register is set to 1.
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_BGAP_PARAMETERS0 register.
//
//******************************************************************************
#define HIB3P3_MEM_BGAP_PARAMETERS0_reserved_M \
0xFFF80000
#define HIB3P3_MEM_BGAP_PARAMETERS0_reserved_S 19
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_en_seq \
0x00040000
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_vbok4bg_comp_trim_M \
0x0001C000
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_vbok4bg_comp_trim_S 14
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_en_vbat_ok_4bg \
0x00001000
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_en_vbok4bg_comp \
0x00000800
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_en_vbok4bg_comp_ref \
0x00000400
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_spare_M \
0x000003FF
#define HIB3P3_MEM_BGAP_PARAMETERS0_mem_bgap_spare_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_BGAP_PARAMETERS1 register.
//
//******************************************************************************
#define HIB3P3_MEM_BGAP_PARAMETERS1_reserved_M \
0xE0000000
#define HIB3P3_MEM_BGAP_PARAMETERS1_reserved_S 29
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_act_iref_itrim_M \
0x1F000000
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_act_iref_itrim_S 24
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en_act_iref \
0x00000008
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en_v2i \
0x00000004
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en_cap_sw \
0x00000002
#define HIB3P3_MEM_BGAP_PARAMETERS1_mem_bgap_en \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_DETECTION_STATUS register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_DETECTION_STATUS_reserved_M \
0xFFFFFF80
#define HIB3P3_MEM_HIB_DETECTION_STATUS_reserved_S 7
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_forced_ana_status \
0x00000040 // 1 - 1.8 V supply forced mode.
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_forced_flash_status \
0x00000004 // 1 - 3.3 V supply forced mode for
// Flash supply
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_ext_clk_det_out_status \
0x00000002 // 1 - Forced clock mode
#define HIB3P3_MEM_HIB_DETECTION_STATUS_hib_xtal_det_out_status \
0x00000001 // 1 - XTAL clock mode
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_MISC_CONTROLS register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_MISC_CONTROLS_reserved_M \
0xFFFFF800
#define HIB3P3_MEM_HIB_MISC_CONTROLS_reserved_S 11
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_en_pok_por_comp \
0x00000400
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_en_pok_por_comp_ref \
0x00000200
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_pok_por_comp_trim_M \
0x000001C0
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_pok_por_comp_trim_S 6
#define HIB3P3_MEM_HIB_MISC_CONTROLS_NU1 \
0x00000020
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_flash_det_en \
0x00000010
#define HIB3P3_MEM_HIB_MISC_CONTROLS_mem_hib_en_tmux \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_CONFIG register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_CONFIG_TOP_MUX_CTRL_SOP_SPIO_M \
0xFF000000
#define HIB3P3_MEM_HIB_CONFIG_TOP_MUX_CTRL_SOP_SPIO_S 24
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED3 \
0x00080000 // 1 - Enable VDD_FLASH_INDP_PAD
// for digital path (SHARED4) ; 0 -
// Disable VDD_FLASH_INDP_PAD for
// digital path (SHARED4) ; Before
// programming this bit to 1, ensure
// that the device is in FORCED 3.3
// supply Mode, which can be
// inferred from the register :
// MEM_HIB_DETECTION_STATUS : 0x0040
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED2 \
0x00040000 // 1 - Enable the
// VDD_FB_GPIO_MUX_PAD for digital
// path (SHARED3) ; 0 - Disable the
// VDD_FB_GPIO_MUX_PAD for digital
// path (SHARED3) ; This pin can be
// used only in modes other than
// SOP("111")
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED1 \
0x00020000 // 1 - Enable the PM_TEST_PAD for
// digital GPIO path (SHARED2) ; 0 -
// Disable the PM_TEST_PAD for
// digital GPIO path (SHARED2) This
// pin can be used for digital only
// in modes other then SOP-111
#define HIB3P3_MEM_HIB_CONFIG_EN_ANA_DIG_SHARED0 \
0x00010000 // 1 - Enable the XTAL_N pin
// digital GPIO path (SHARED1); 0 -
// Disable the XTAL_N pin digital
// GPIO path (SHARED1). Before
// programming this bit to 1, ensure
// that the device is in FORCED CLK
// Mode, which can inferred from the
// register :
// MEM_HIB_DETECTION_STATUS :
// 0x0040.
#define HIB3P3_MEM_HIB_CONFIG_mem_hib_xtal_enable \
0x00000100 // 1 - Enable the XTAL Clock ; 0 -
// Donot enable the XTAL Clock. This
// bit has to be programmed to 1 (by
// APPS Devinit F/w), during exit
// from OFF or Hib_wo_clks modes,
// after checking if the slow_clk
// mode is XTAL_CLK mode. Once
// enabled the XTAL will be disabled
// only after entering HIB_WO_CLKS
// mode. This register will be reset
// during Hibernate -WO-Clks mode
// (but not during Hibernate-W-Clks
// mode).
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_IRQ_ENABLE register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_IRQ_ENABLE_HIB_RTC_IRQ_ENABLE \
0x00000001 // 1 - Enable the HIB RTC - IRQ ; 0
// - Disable the HIB RTC - IRQ
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_IRQ_LSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_IRQ_LSW_CONF_HIB_RTC_IRQ_LSW_CONF_M \
0xFFFFFFFF // Configuration for LSW of the
// RTC-Timestamp at which interrupt
// need to be generated
#define HIB3P3_MEM_HIB_RTC_IRQ_LSW_CONF_HIB_RTC_IRQ_LSW_CONF_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_RTC_IRQ_MSW_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_RTC_IRQ_MSW_CONF_HIB_RTC_IRQ_MSW_CONF_M \
0x0000FFFF // Configuration for MSW of thr
// RTC-Timestamp at which the
// interrupt need to be generated
#define HIB3P3_MEM_HIB_RTC_IRQ_MSW_CONF_HIB_RTC_IRQ_MSW_CONF_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_UART_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_UART_CONF_reserved_M \
0xFFFFFFFE
#define HIB3P3_MEM_HIB_UART_CONF_reserved_S 1
#define HIB3P3_MEM_HIB_UART_CONF_mem_hib_uart_wake_en \
0x00000001 // 1 - Enable the UART-Autonomous
// mode wakeup during Hibernate mode
// ; This is an auto-clear bit, once
// programmed to 1, it will latched
// into an internal register which
// remain asserted until the
// Hib-wakeup is initiated.
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_GPIO_WAKE_EN register.
//
//******************************************************************************
#define HIB3P3_MEM_GPIO_WAKE_EN_reserved_M \
0xFFFFFF00
#define HIB3P3_MEM_GPIO_WAKE_EN_reserved_S 8
#define HIB3P3_MEM_GPIO_WAKE_EN_mem_gpio_wake_en_M \
0x000000FF // 1 - Enable the GPIO-Autonomous
// mode wakeup during Hibernate mode
// ; This is an auto-clear bit, once
// programmed to 1, it will latched
// into an internal register which
// remain asserted until the
// Hib-wakeup is initiated.
#define HIB3P3_MEM_GPIO_WAKE_EN_mem_gpio_wake_en_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_GPIO_WAKE_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_GPIO_WAKE_CONF_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_GPIO_WAKE_CONF_reserved_S 16
#define HIB3P3_MEM_GPIO_WAKE_CONF_mem_gpio_wake_conf_M \
0x0000FFFF // Configuration to say whether the
// GPIO wakeup has to happen on
// Level0 or falling-edge for the
// given group. “00” Level0 “01”
// Level1 “10”- Fall-edge “11”-
// Rise-edge [1:0] Conf for GPIO0
// [3:2] Conf for GPIO1 [5:4]
// Conf for GPIO2 [7:6] Conf for
// GPIO3 [9:8] Conf for GPIO4
// [11:10] Conf for GPIO5 [13:12]
// Conf for GPIO6
#define HIB3P3_MEM_GPIO_WAKE_CONF_mem_gpio_wake_conf_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_PAD_OEN_RET33_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_PAD_OEN_RET33_CONF_mem_pad_oen_ret33_override_ctrl \
0x00000004 // 1 - Override the OEN33 and RET33
// controls of GPIOs during
// SOP-Bootdebug mode ; 0 - Donot
// override the OEN33 and RET33
// controls of GPIOs during
// SOP-Bootdebug mode
#define HIB3P3_MEM_PAD_OEN_RET33_CONF_PAD_OEN33_CONF \
0x00000002
#define HIB3P3_MEM_PAD_OEN_RET33_CONF_PAD_RET33_CONF \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_UART_RTS_OEN_RET33_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_UART_RTS_OEN_RET33_CONF_mem_uart_nrts_oen_ret33_override_ctrl \
0x00000004 // 1 - Override the OEN33 and RET33
// controls of UART NRTS GPIO during
// SOP-Bootdebug mode ; 0 - Donot
// override the OEN33 and RET33
// controls of UART NRTS GPIO during
// SOP-Bootdebug mode
#define HIB3P3_MEM_UART_RTS_OEN_RET33_CONF_PAD_UART_RTS_OEN33_CONF \
0x00000002
#define HIB3P3_MEM_UART_RTS_OEN_RET33_CONF_PAD_UART_RTS_RET33_CONF \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_JTAG_CONF register.
//
//******************************************************************************
#define HIB3P3_MEM_JTAG_CONF_mem_jtag1_oen_ret33_override_ctrl \
0x00000200
#define HIB3P3_MEM_JTAG_CONF_mem_jtag0_oen_ret33_override_ctrl \
0x00000100
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG1_RTS_OEN33_CONF \
0x00000008
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG1_RTS_RET33_CONF \
0x00000004
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG0_RTS_OEN33_CONF \
0x00000002
#define HIB3P3_MEM_JTAG_CONF_PAD_JTAG0_RTS_RET33_CONF \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG0 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG0_mem_hib_reg0_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG0_mem_hib_reg0_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG1 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG1_mem_hib_reg1_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG1_mem_hib_reg1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG2 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG2_mem_hib_reg2_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG2_mem_hib_reg2_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_REG3 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_REG3_mem_hib_reg3_M \
0xFFFFFFFF
#define HIB3P3_MEM_HIB_REG3_mem_hib_reg3_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_SEQUENCER_CFG0 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev0_to_ev1_time_M \
0xFFFF0000 // Configuration for the number of
// slow-clks between de-assertion of
// EN_BG_3P3V to assertion of
// EN_BG_3P3V
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev0_to_ev1_time_S 16
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_NU1 \
0x00008000
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev3_to_ev4_time_M \
0x00006000 // Configuration for the number of
// slow-clks between assertion of
// EN_COMP_3P3V and assertion of
// EN_COMP_LATCH_3P3V
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev3_to_ev4_time_S 13
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev2_to_ev3_time_M \
0x00001800 // Configuration for the number of
// slow-clks between assertion of
// (EN_CAP_SW_3P3V,EN_COMP_REF) and
// assertion of (EN_COMP_3P3V)
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev2_to_ev3_time_S 11
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev1_to_ev2_time_M \
0x00000600 // Configuration for the number of
// slow-clks between assertion of
// (EN_BG_3P3V) and assertion of
// (EN_CAP_SW_3P3V,
// EN_COMP_REF_3P3V)
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bdc_ev1_to_ev2_time_S 9
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_crude_ref_comp \
0x00000100
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_vbok4bg_ref_override_ctrl \
0x00000080 // 1 - EN_VBOK4BG_REF comes from
// bit[10] of the register
// MEM_BGAP_PARAMETERS0 [0x0038]. 0
// - EN_VBOK4BG_REF comes directly
// from the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_vbok4bg_comp_override_ctrl \
0x00000040 // 1 - EN_VBOK4BG comes from
// bit[11] of the register
// MEM_BGAP_PARAMETERS0 [0x0038]. 0
// - EN_VBOK4BG comes directly from
// the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_v2i_override_ctrl \
0x00000020 // 1 - EN_V2I comes from bit[2] of
// the register MEM_BGAP_PARAMETERS1
// [0x003C]. 0 - EN_V2I comes
// directly from the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_por_comp_ref_override_ctrl \
0x00000010 // 1 - EN_POR_COMP_REF comes from
// bit[9] of the register
// MEM_HIB_MISC_CONTROLS [0x0044]. 0
// - EN_POR_COMP_REF comes directly
// from the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_en_por_comp_override_ctrl \
0x00000008 // 1 - EN_POR_COMP comes from
// bit[10] of the register
// MEM_HIB_MISC_CONTROLS [0x044]. 0
// - EN_POR_COMP comes directly from
// the Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_cap_sw_override_ctrl \
0x00000004 // 1 - EN_CAP_SW comes from bit[1]
// of the register
// MEM_BGAP_PARAMETERS1 [0x003C]. 0
// - EN_CAP_SW comes directly from
// Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_bg_override_ctrl \
0x00000002 // 1 - EN_BGAP comes from bit[0] of
// the register MEM_BGAP_PARAMETERS1
// [0x003C]. 0 - EN_BGAP comes
// directly from Hib-Sequencer.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG0_mem_act_iref_override_ctrl \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_SEQUENCER_CFG1 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_reserved_M \
0xFFFF0000
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_reserved_S 16
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_ev5_to_ev6_time_M \
0x0000C000 // Configuration for number of
// slow-clks between de-assertion of
// EN_COMP_LATCH and assertion of
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_ev5_to_ev6_time_S 14
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev1_to_ev2_time_M \
0x00003000 // Configuration for number of
// slow-clks between assertion of
// EN_COMP_REF to assertion of
// EN_COMP during HIB-Exit
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev1_to_ev2_time_S 12
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_ev1_time_M \
0x00000C00 // TBD
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_ev1_time_S 10
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_active_M \
0x00000300 // Configuration in number of
// slow-clks between assertion of
// (EN_BGAP_3P3V, EN_CAP_SW_3P3V,
// EN_ACT_IREF_3P3V, EN_COMP_REF) to
// assertion of EN_COMP_3P3V
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_bdc_to_active_ev0_to_active_S 8
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_active_to_bdc_ev1_to_bdc_ev0_time_M \
0x000000C0 // Configuration in number of
// slow-clks between de-assertion of
// (EN_COMP_3P3V, EN_COMP_REF_3P3V,
// EN_ACT_IREF_3P3V, EN_CAP_SW_3P3V)
// to deassertion of EN_BGAP_3P3V.
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_mem_active_to_bdc_ev1_to_bdc_ev0_time_S 6
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_NU1_M \
0x0000003F
#define HIB3P3_MEM_HIB_SEQUENCER_CFG1_NU1_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_MISC_CONFIG register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_MISC_CONFIG_mem_en_pll_untrim_current \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_WAKE_STATUS register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_WAKE_STATUS_hib_wake_src_M \
0x0000001E // "0100" - GPIO ; "0010" - RTC ;
// "0001" - UART Others - Reserved
#define HIB3P3_MEM_HIB_WAKE_STATUS_hib_wake_src_S 1
#define HIB3P3_MEM_HIB_WAKE_STATUS_hib_wake_status \
0x00000001 // 1 - Wake from Hibernate ; 0 -
// Wake from OFF
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_LPDS_GPIO_SEL register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_LPDS_GPIO_SEL_HIB_LPDS_GPIO_SEL_M \
0x00000007
#define HIB3P3_MEM_HIB_LPDS_GPIO_SEL_HIB_LPDS_GPIO_SEL_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_MEM_HIB_SEQUENCER_CFG2 register.
//
//******************************************************************************
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_reserved_M \
0xFFFFF800
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_reserved_S 11
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_active_to_bdc_ev0_to_active_to_bdc_ev1_time_M \
0x00000600 // Deassertion of EN_COMP_LATCH_3P3
// to deassertion of (EN_COMP_3P3,
// EN_COMP_REF_3P3, EN_ACT_IREF_3P3,
// EN_CAP_SW_3P3)
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_active_to_bdc_ev0_to_active_to_bdc_ev1_time_S 9
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev4_to_ev5_time_M \
0x000001C0 // Assertion of EN_COMP_LATCH_3P3
// to deassertion of
// EN_COMP_LATCH_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev4_to_ev5_time_S 6
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev6_to_ev7_time_M \
0x00000030 // Deassertion of (EN_CAP_SW_3P3,
// EN_COMP_REF_3P3, EN_COMP_3P3,
// EN_COMP_OUT_LATCH_3P3) to
// deassertion of EN_BGAP_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_ev6_to_ev7_time_S 4
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_to_active_ev1_to_ev2_time_M \
0x0000000C // Assertion of EN_COMP_3P3 to
// assertion of EN_COMPOUT_LATCH_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_bdc_to_active_ev1_to_ev2_time_S 2
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_hib_to_active_ev2_to_ev3_time_M \
0x00000003 // Assertion of EN_COMP_3P3 to
// assertion of EN_COMPOUT_LATCH_3P3
#define HIB3P3_MEM_HIB_SEQUENCER_CFG2_mem_hib_to_active_ev2_to_ev3_time_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIBANA_SPARE_LOWV register.
//
//******************************************************************************
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare1_M \
0xFFC00000
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare1_S 22
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare0_M \
0x0001FFFF
#define HIB3P3_HIBANA_SPARE_LOWV_mem_hibana_spare0_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_TMUX_CTRL register.
//
//******************************************************************************
#define HIB3P3_HIB_TMUX_CTRL_reserved_M \
0xFFFFFC00
#define HIB3P3_HIB_TMUX_CTRL_reserved_S 10
#define HIB3P3_HIB_TMUX_CTRL_mem_hd_tmux_cntrl_M \
0x000003FF
#define HIB3P3_HIB_TMUX_CTRL_mem_hd_tmux_cntrl_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_1P2_1P8_LDO_TRIM register.
//
//******************************************************************************
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_reserved_M \
0xFFFFF000
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_reserved_S 12
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_en_override_ctrl \
0x00000800
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_en_override_ctrl \
0x00000400
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_en_override \
0x00000200
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_en_override \
0x00000100
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_vtrim_M \
0x000000F0
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p2_ldo_vtrim_S 4
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_vtrim_M \
0x0000000F
#define HIB3P3_HIB_1P2_1P8_LDO_TRIM_mem_hd_1p8_ldo_vtrim_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_COMP_TRIM register.
//
//******************************************************************************
#define HIB3P3_HIB_COMP_TRIM_reserved_M \
0xFFFFFFF8
#define HIB3P3_HIB_COMP_TRIM_reserved_S 3
#define HIB3P3_HIB_COMP_TRIM_mem_hd_comp_trim_M \
0x00000007
#define HIB3P3_HIB_COMP_TRIM_mem_hd_comp_trim_S 0
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_EN_TS register.
//
//******************************************************************************
#define HIB3P3_HIB_EN_TS_reserved_M \
0xFFFFFFFE
#define HIB3P3_HIB_EN_TS_reserved_S 1
#define HIB3P3_HIB_EN_TS_mem_hd_en_ts \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_1P8V_DET_EN register.
//
//******************************************************************************
#define HIB3P3_HIB_1P8V_DET_EN_reserved_M \
0xFFFFFFFE
#define HIB3P3_HIB_1P8V_DET_EN_reserved_S 1
#define HIB3P3_HIB_1P8V_DET_EN_mem_hib_1p8v_det_en \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_VBAT_MON_EN register.
//
//******************************************************************************
#define HIB3P3_HIB_VBAT_MON_EN_reserved_M \
0xFFFFFFFC
#define HIB3P3_HIB_VBAT_MON_EN_reserved_S 2
#define HIB3P3_HIB_VBAT_MON_EN_mem_hib_vbat_mon_del_en \
0x00000002
#define HIB3P3_HIB_VBAT_MON_EN_mem_hib_vbat_mon_en \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_NHIB_ENABLE register.
//
//******************************************************************************
#define HIB3P3_HIB_NHIB_ENABLE_mem_hib_nhib_enable \
0x00000001
//******************************************************************************
//
// The following are defines for the bit fields in the
// HIB3P3_O_HIB_UART_RTS_SW_ENABLE register.
//
//******************************************************************************
#define HIB3P3_HIB_UART_RTS_SW_ENABLE_mem_hib_uart_rts_sw_enable \
0x00000001
#endif // __HW_HIB3P3_H__