259 lines
11 KiB
C
259 lines
11 KiB
C
/*
|
|
* Copyright 2020 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
#ifndef _FSL_PHY_H_
|
|
#define _FSL_PHY_H_
|
|
|
|
#include "fsl_mdio.h"
|
|
|
|
/*! @note The following PHY registers are the IEEE802.3 standard definition, same register and bit field may
|
|
have different names in various PHYs, but the feature they represent should be same or very similar. */
|
|
|
|
/*! @brief Defines the IEEE802.3 standard PHY registers. */
|
|
#define PHY_BASICCONTROL_REG 0x00U /*!< The PHY basic control register. */
|
|
#define PHY_BASICSTATUS_REG 0x01U /*!< The PHY basic status register. */
|
|
#define PHY_ID1_REG 0x02U /*!< The PHY ID one register. */
|
|
#define PHY_ID2_REG 0x03U /*!< The PHY ID two register. */
|
|
#define PHY_AUTONEG_ADVERTISE_REG 0x04U /*!< The PHY auto-negotiate advertise register. */
|
|
#define PHY_AUTONEG_LINKPARTNER_REG 0x05U /*!< The PHY auto negotiation link partner ability register. */
|
|
#define PHY_AUTONEG_EXPANSION_REG 0x06U /*!< The PHY auto negotiation expansion register. */
|
|
#define PHY_1000BASET_CONTROL_REG 0x09U /*!< The PHY 1000BASE-T control register. */
|
|
#define PHY_MMD_ACCESS_CONTROL_REG 0x0DU /*!< The PHY MMD access control register. */
|
|
#define PHY_MMD_ACCESS_DATA_REG 0x0EU /*!< The PHY MMD access data register. */
|
|
|
|
/*! @brief Defines the mask flag in basic control register(Address 0x00). */
|
|
#define PHY_BCTL_SPEED1_MASK 0x0040U /*!< The PHY speed bit mask(MSB).*/
|
|
#define PHY_BCTL_ISOLATE_MASK 0x0400U /*!< The PHY isolate mask.*/
|
|
#define PHY_BCTL_DUPLEX_MASK 0x0100U /*!< The PHY duplex bit mask. */
|
|
#define PHY_BCTL_RESTART_AUTONEG_MASK 0x0200U /*!< The PHY restart auto negotiation mask. */
|
|
#define PHY_BCTL_AUTONEG_MASK 0x1000U /*!< The PHY auto negotiation bit mask. */
|
|
#define PHY_BCTL_SPEED0_MASK 0x2000U /*!< The PHY speed bit mask(LSB). */
|
|
#define PHY_BCTL_LOOP_MASK 0x4000U /*!< The PHY loop bit mask. */
|
|
#define PHY_BCTL_RESET_MASK 0x8000U /*!< The PHY reset bit mask. */
|
|
|
|
/*! @brief Defines the mask flag in basic status register(Address 0x01). */
|
|
#define PHY_BSTATUS_LINKSTATUS_MASK 0x0004U /*!< The PHY link status mask. */
|
|
#define PHY_BSTATUS_AUTONEGABLE_MASK 0x0008U /*!< The PHY auto-negotiation ability mask. */
|
|
#define PHY_BSTATUS_SPEEDUPLX_MASK 0x001CU /*!< The PHY speed and duplex mask. */
|
|
#define PHY_BSTATUS_AUTONEGCOMP_MASK 0x0020U /*!< The PHY auto-negotiation complete mask. */
|
|
|
|
/*! @brief Defines the mask flag in PHY auto-negotiation advertise register(Address 0x04). */
|
|
#define PHY_100BaseT4_ABILITY_MASK 0x200U /*!< The PHY have the T4 ability. */
|
|
#define PHY_100BASETX_FULLDUPLEX_MASK 0x100U /*!< The PHY has the 100M full duplex ability.*/
|
|
#define PHY_100BASETX_HALFDUPLEX_MASK 0x080U /*!< The PHY has the 100M full duplex ability.*/
|
|
#define PHY_10BASETX_FULLDUPLEX_MASK 0x040U /*!< The PHY has the 10M full duplex ability.*/
|
|
#define PHY_10BASETX_HALFDUPLEX_MASK 0x020U /*!< The PHY has the 10M full duplex ability.*/
|
|
#define PHY_IEEE802_3_SELECTOR_MASK 0x001U /*!< The message type being sent by Auto-Nego.*/
|
|
|
|
/*! @brief Defines the mask flag in the 1000BASE-T control register(Address 0x09). */
|
|
#define PHY_1000BASET_FULLDUPLEX_MASK 0x200U /*!< The PHY has the 1000M full duplex ability.*/
|
|
#define PHY_1000BASET_HALFDUPLEX_MASK 0x100U /*!< The PHY has the 1000M half duplex ability.*/
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
typedef struct _phy_handle phy_handle_t;
|
|
/*! @brief Defines the PHY link speed. */
|
|
typedef enum _phy_speed
|
|
{
|
|
kPHY_Speed10M = 0U, /*!< ENET PHY 10M speed. */
|
|
kPHY_Speed100M, /*!< ENET PHY 100M speed. */
|
|
kPHY_Speed1000M /*!< ENET PHY 1000M speed. */
|
|
} phy_speed_t;
|
|
|
|
/*! @brief Defines the PHY link duplex. */
|
|
typedef enum _phy_duplex
|
|
{
|
|
kPHY_HalfDuplex = 0U, /*!< ENET PHY half duplex. */
|
|
kPHY_FullDuplex /*!< ENET PHY full duplex. */
|
|
} phy_duplex_t;
|
|
|
|
/*! @brief Defines the PHY loopback mode. */
|
|
typedef enum _phy_loop
|
|
{
|
|
kPHY_LocalLoop = 0U, /*!< ENET PHY local/digital loopback. */
|
|
kPHY_RemoteLoop, /*!< ENET PHY remote loopback. */
|
|
kPHY_ExternalLoop, /*!< ENET PHY external loopback. */
|
|
} phy_loop_t;
|
|
|
|
/*! @brief Defines the PHY MMD data access mode. */
|
|
typedef enum _phy_mmd_access_mode
|
|
{
|
|
kPHY_MMDAccessNoPostIncrement = (1U << 14), /*!< ENET PHY MMD access data with no address post increment. */
|
|
kPHY_MMDAccessRdWrPostIncrement =
|
|
(2U << 14), /*!< ENET PHY MMD access data with Read/Write address post increment. */
|
|
kPHY_MMDAccessWrPostIncrement = (3U << 14), /*!< ENET PHY MMD access data with Write address post increment. */
|
|
} phy_mmd_access_mode_t;
|
|
|
|
/*! @brief Defines PHY configuration. */
|
|
typedef struct _phy_config
|
|
{
|
|
uint32_t phyAddr; /*!< PHY address. */
|
|
phy_speed_t speed; /*!< PHY speed configuration. */
|
|
phy_duplex_t duplex; /*!< PHY duplex configuration. */
|
|
bool autoNeg; /*!< PHY auto-negotiation, true: enable, false: disable. */
|
|
bool enableEEE; /*!< PHY Energy Efficient Ethernet. */
|
|
} phy_config_t;
|
|
|
|
/*! @brief PHY device operations. */
|
|
typedef struct _phy_operations
|
|
{
|
|
status_t (*phyInit)(phy_handle_t *handle, const phy_config_t *config);
|
|
status_t (*phyWrite)(phy_handle_t *handle, uint32_t phyReg, uint32_t data);
|
|
status_t (*phyRead)(phy_handle_t *handle, uint32_t phyReg, uint32_t *dataPtr);
|
|
status_t (*getAutoNegoStatus)(phy_handle_t *handle, bool *status);
|
|
status_t (*getLinkStatus)(phy_handle_t *handle, bool *status);
|
|
status_t (*getLinkSpeedDuplex)(phy_handle_t *handle, phy_speed_t *speed, phy_duplex_t *duplex);
|
|
status_t (*setLinkSpeedDuplex)(phy_handle_t *handle, phy_speed_t speed, phy_duplex_t duplex);
|
|
status_t (*enableLoopback)(phy_handle_t *handle, phy_loop_t mode, phy_speed_t speed, bool enable);
|
|
} phy_operations_t;
|
|
|
|
/*! @brief PHY device handle. */
|
|
|
|
struct _phy_handle
|
|
{
|
|
uint32_t phyAddr; /*!< PHY address. */
|
|
mdio_handle_t *mdioHandle; /*!< The MDIO handle used by the phy device, it is specified by device. */
|
|
const phy_operations_t *ops; /*!< The device related operations. */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*!
|
|
* @name PHY Driver
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initializes PHY.
|
|
*
|
|
* This function initialize PHY.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param config Pointer to structure of phy_config_t.
|
|
* @retval kStatus_Success PHY initialization succeeds
|
|
* @retval kStatus_Fail PHY initialization fails
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_Init(phy_handle_t *handle, const phy_config_t *config) {
|
|
return handle->ops->phyInit(handle, config);
|
|
}
|
|
/*!
|
|
* @brief PHY Write function. This function write data over the SMI to
|
|
* the specified PHY register. This function is called by all PHY interfaces.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param phyReg The PHY register.
|
|
* @param data The data written to the PHY register.
|
|
* @retval kStatus_Success PHY write success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_Write(phy_handle_t *handle, uint32_t phyReg, uint32_t data) {
|
|
return handle->ops->phyWrite(handle, phyReg, data);
|
|
}
|
|
|
|
/*!
|
|
* @brief PHY Read function. This interface read data over the SMI from the
|
|
* specified PHY register. This function is called by all PHY interfaces.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param phyReg The PHY register.
|
|
* @param dataPtr The address to store the data read from the PHY register.
|
|
* @retval kStatus_Success PHY read success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_Read(phy_handle_t *handle, uint32_t phyReg, uint32_t *dataPtr) {
|
|
return handle->ops->phyRead(handle, phyReg, dataPtr);
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the PHY auto-negotiation status.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param status The auto-negotiation status of the PHY.
|
|
* - true the auto-negotiation is over.
|
|
* - false the auto-negotiation is on-going or not started.
|
|
* @retval kStatus_Success PHY gets status success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_GetAutoNegotiationStatus(phy_handle_t *handle, bool *status) {
|
|
return handle->ops->getAutoNegoStatus(handle, status);
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the PHY link status.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param status The link up or down status of the PHY.
|
|
* - true the link is up.
|
|
* - false the link is down.
|
|
* @retval kStatus_Success PHY get link status success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_GetLinkStatus(phy_handle_t *handle, bool *status) {
|
|
return handle->ops->getLinkStatus(handle, status);
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the PHY link speed and duplex.
|
|
*
|
|
* @brief This function gets the speed and duplex mode of PHY. User can give one of speed
|
|
* and duplex address paramter and set the other as NULL if only wants to get one of them.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param speed The address of PHY link speed.
|
|
* @param duplex The link duplex of PHY.
|
|
* @retval kStatus_Success PHY get link speed and duplex success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_GetLinkSpeedDuplex(phy_handle_t *handle, phy_speed_t *speed, phy_duplex_t *duplex) {
|
|
return handle->ops->getLinkSpeedDuplex(handle, speed, duplex);
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the PHY link speed and duplex.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param speed Specified PHY link speed.
|
|
* @param duplex Specified PHY link duplex.
|
|
* @retval kStatus_Success PHY gets status success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_SetLinkSpeedDuplex(phy_handle_t *handle, phy_speed_t speed, phy_duplex_t duplex) {
|
|
return handle->ops->setLinkSpeedDuplex(handle, speed, duplex);
|
|
}
|
|
|
|
/*!
|
|
* @brief Enable PHY loopcback mode.
|
|
*
|
|
* @param handle PHY device handle.
|
|
* @param mode The loopback mode to be enabled, please see "phy_loop_t".
|
|
* All loopback modes should not be set together, when one loopback mode is set
|
|
* another should be disabled.
|
|
* @param speed PHY speed for loopback mode.
|
|
* @param enable True to enable, false to disable.
|
|
* @retval kStatus_Success PHY get link speed and duplex success
|
|
* @retval kStatus_PHY_SMIVisitTimeout PHY SMI visit time out
|
|
*/
|
|
static inline status_t PHY_EnableLoopback(phy_handle_t *handle, phy_loop_t mode, phy_speed_t speed, bool enable) {
|
|
return handle->ops->enableLoopback(handle, mode, speed, enable);
|
|
}
|
|
|
|
/* @} */
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
/*! @}*/
|
|
#endif
|