circuitpython/ports/nrf/boards/evk_nina_b3/mpconfigboard.h

86 lines
3.1 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2016 Glenn Ruben Bakke
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
// Pin numbering scheme for nrf52840-based boards
//
// Software Pins 0-31 correspond to physical pins
// 0.x and software Pins 32-47 correspond to physical pins 1.x.
//
// Example: Pin(47) would be 1.15 on the PCA10059
// Board data
#define MICROPY_HW_BOARD_NAME "EVK_NINA_B3"
#define MICROPY_HW_MCU_NAME "NRF52840"
#define MICROPY_PY_SYS_PLATFORM "nrf52"
// Enable @viper and @native
#define MICROPY_EMIT_THUMB (1)
#define MICROPY_EMIT_INLINE_THUMB (1)
// Enable optional modules
#define MICROPY_PY_UERRNO (1)
#define MICROPY_PY_UHASHLIB (1)
// Peripherals Config
#define MICROPY_PY_MACHINE_UART (1)
#define MICROPY_PY_MACHINE_HW_PWM (1)
#define MICROPY_PY_MACHINE_HW_SPI (1)
#define MICROPY_PY_MACHINE_TIMER (1)
#define MICROPY_PY_MACHINE_RTCOUNTER (1)
#define MICROPY_PY_MACHINE_I2C (1)
#define MICROPY_PY_MACHINE_ADC (1)
#define MICROPY_PY_MACHINE_TEMP (1)
#define MICROPY_HW_ENABLE_RNG (1)
// Configure LEDS
#define MICROPY_HW_HAS_LED (1)
#define MICROPY_HW_LED_COUNT (3)
#define MICROPY_HW_LED_PULLUP (1)
#define MICROPY_HW_LED1 (13) // LED1 RED
#define MICROPY_HW_LED2 (25) // LED2 GREEN
#define MICROPY_HW_LED3 (32) // LED3 BLUE
// UART config
#define MICROPY_HW_UART1_RX (29)
#define MICROPY_HW_UART1_TX (45)
#define MICROPY_HW_UART1_CTS (44)
#define MICROPY_HW_UART1_RTS (31)
#define MICROPY_HW_UART1_HWFC (1)
// SPI config
#define MICROPY_HW_SPI0_NAME "SPI0"
#define MICROPY_HW_SPI0_SCK (12)
#define MICROPY_HW_SPI0_MOSI (14)
#define MICROPY_HW_SPI0_MISO (15)
// PWM Names
#define MICROPY_HW_PWM0_NAME "PWM0"
#define MICROPY_HW_PWM1_NAME "PWM1"
#define MICROPY_HW_PWM2_NAME "PWM2"
// How Many LED indexes appear in the help() message
#define HELP_TEXT_BOARD_LED "1,2,3"