djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2a4825848c
circuitpython/ports/mimxrt/Makefile
robert-hh 5e990cc27f mimxrt: Add support for MIMXRT1176 MCUs, and MIMXRT1170_EVK board. 
The RT1176 has two cores, but the actual firmware supports only the CM7.
There are currently no good plans on how to use the CM4.

The actual MIMXRT1170_EVK board is on par with the existing MIMXRT boards,
with the following extensions:
- Use 64 MB RAM for the heap.
- Support both LAN interfaces as LAN(0) and LAN(1), with LAN(1)
  being the 1GB interface.

The dual LAN port interface can eventually be adapted as well for the
RT1062 MCU.

This work was done in collaboration with @alphaFred.
2022-11-17 14:11:50 +11:00

472 lines
15 KiB
Makefile
Raw Blame History

# =============================================================================
# Parameter Configuration
# =============================================================================
BOARD ?= TEENSY40
BOARD_DIR ?= boards/$(BOARD)
BUILD ?= build-$(BOARD)
PORT ?= /dev/ttyACM0
CROSS_COMPILE ?= arm-none-eabi-
GIT_SUBMODULES += lib/tinyusb lib/nxp_driver
# MicroPython feature configurations
FROZEN_MANIFEST ?= boards/manifest.py
MICROPY_VFS_LFS2 ?= 1
MICROPY_VFS_FAT ?= 1
# qstr definitions (must come before including py.mk)
QSTR_DEFS += qstrdefsport.h
QSTR_GLOBAL_DEPENDENCIES = $(BOARD_DIR)/mpconfigboard.h
# Generation scripts
MAKE_PINS = boards/make-pins.py
MAKE_FLEXRAM_LD = boards/make-flexram-config.py
# Include py make environment
include ../../py/mkenv.mk
# Include micropython configuration board makefile
ifeq ($(wildcard $(BOARD_DIR)/.),)
$(error Invalid BOARD specified: $(BOARD_DIR))
endif
include $(BOARD_DIR)/mpconfigboard.mk
# Include py core make definitions
include $(TOP)/py/py.mk
include $(TOP)/extmod/extmod.mk
# Set SDK directory based on MCU_SERIES
MCU_DIR = lib/nxp_driver/sdk/devices/$(MCU_SERIES)
# Select linker scripts based on MCU_SERIES
LD_FILES = boards/$(MCU_SERIES).ld boards/common.ld
# Parameter configurations for generation
AF_FILE = boards/$(MCU_SERIES)_af.csv
BOARD_PINS = $(BOARD_DIR)/pins.csv
PREFIX_FILE = boards/mimxrt_prefix.c
GEN_FLEXRAM_CONFIG_SRC = $(BUILD)/flexram_config.s
GEN_PINS_AF_CONST = $(HEADER_BUILD)/pins_af_const.h
GEN_PINS_AF_PY = $(BUILD)/pins_af.py
GEN_PINS_HDR = $(HEADER_BUILD)/pins.h
GEN_PINS_SRC = $(BUILD)/pins_gen.c
# =============================================================================
# Includes
# =============================================================================
INC += -I$(BOARD_DIR)
INC += -I$(BUILD)
INC += -I$(TOP)
INC += -I$(TOP)/$(MCU_DIR)
INC += -I$(TOP)/$(MCU_DIR)/drivers
INC += -I$(TOP)/lib/cmsis/inc
INC += -I$(TOP)/lib/oofatfs
INC += -I$(TOP)/lib/tinyusb/hw
INC += -I$(TOP)/lib/tinyusb/hw/bsp/teensy_40
INC += -I$(TOP)/lib/tinyusb/src
INC += -I.
INC += -Ihal
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
ifeq ($(MICROPY_PY_LWIP),1)
INC += -Ilwip_inc
INC += -Ihal/phy
endif
# =============================================================================
# Sources
# =============================================================================
# TinyUSB Stack source
SRC_TINYUSB_C += \
lib/tinyusb/src/class/cdc/cdc_device.c \
lib/tinyusb/src/class/dfu/dfu_rt_device.c \
lib/tinyusb/src/class/hid/hid_device.c \
lib/tinyusb/src/class/midi/midi_device.c \
lib/tinyusb/src/class/msc/msc_device.c \
lib/tinyusb/src/class/usbtmc/usbtmc_device.c \
lib/tinyusb/src/class/vendor/vendor_device.c \
lib/tinyusb/src/common/tusb_fifo.c \
lib/tinyusb/src/device/usbd.c \
lib/tinyusb/src/device/usbd_control.c \
lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c \
lib/tinyusb/src/tusb.c
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
ifeq ($(MICROPY_PY_LWIP),1)
SRC_ETH_C += \
$(MCU_DIR)/drivers/fsl_enet.c \
hal/phy/device/phydp83825/fsl_phydp83825.c \
hal/phy/device/phydp83848/fsl_phydp83848.c \
hal/phy/device/phyksz8081/fsl_phyksz8081.c \
hal/phy/device/phylan8720/fsl_phylan8720.c \
hal/phy/device/phyrtl8211f/fsl_phyrtl8211f.c \
hal/phy/mdio/enet/fsl_enet_mdio.c
endif
# NXP SDK sources
SRC_HAL_IMX_C += \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_dmamux.c \
$(MCU_DIR)/drivers/fsl_edma.c \
$(MCU_DIR)/drivers/fsl_flexram.c \
$(MCU_DIR)/drivers/fsl_flexspi.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_gpt.c \
$(MCU_DIR)/drivers/fsl_lpi2c.c \
$(MCU_DIR)/drivers/fsl_lpspi.c \
$(MCU_DIR)/drivers/fsl_lpspi_edma.c \
$(MCU_DIR)/drivers/fsl_lpuart.c \
$(MCU_DIR)/drivers/fsl_pit.c \
$(MCU_DIR)/drivers/fsl_pwm.c \
$(MCU_DIR)/drivers/fsl_sai.c \
$(MCU_DIR)/drivers/fsl_snvs_lp.c \
$(MCU_DIR)/drivers/fsl_wdog.c \
$(MCU_DIR)/system_$(MCU_SERIES)$(MCU_CORE).c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
ifeq ($(MICROPY_HW_SDRAM_AVAIL),1)
SRC_HAL_IMX_C += $(MCU_DIR)/drivers/fsl_semc.c
endif
ifeq ($(MICROPY_PY_MACHINE_SDCARD),1)
SRC_HAL_IMX_C += $(MCU_DIR)/drivers/fsl_usdhc.c
endif
ifeq ($(MCU_SERIES),$(filter $(MCU_SERIES), MIMXRT1015 MIMXRT1021 MIMXRT1052 MIMXRT1062 MIMXRT1064 MIMXRT1176))
SRC_HAL_IMX_C += \
$(MCU_DIR)/drivers/fsl_qtmr.c
endif
ifeq ($(MCU_SERIES), MIMXRT1176)
INC += -I$(TOP)/$(MCU_DIR)/drivers/cm7
SRC_HAL_IMX_C += \
$(MCU_DIR)/drivers/cm7/fsl_cache.c \
$(MCU_DIR)/drivers/fsl_dcdc.c \
$(MCU_DIR)/drivers/fsl_pmu.c \
$(MCU_DIR)/drivers/fsl_common_arm.c \
$(MCU_DIR)/drivers/fsl_anatop_ai.c \
$(MCU_DIR)/drivers/fsl_caam.c \
$(MCU_DIR)/drivers/fsl_lpadc.c
else
SRC_HAL_IMX_C += \
$(MCU_DIR)/drivers/fsl_adc.c \
$(MCU_DIR)/drivers/fsl_cache.c \
$(MCU_DIR)/drivers/fsl_trng.c
endif
# C source files
SRC_C += \
board_init.c \
boards/$(MCU_SERIES)_clock_config.c \
dma_manager.c \
drivers/bus/softspi.c \
drivers/dht/dht.c \
eth.c \
fatfs_port.c \
hal/pwm_backport.c \
led.c \
machine_adc.c \
machine_bitstream.c \
machine_i2c.c \
machine_i2s.c \
machine_led.c \
machine_pin.c \
machine_rtc.c \
machine_sdcard.c \
machine_spi.c \
machine_uart.c \
machine_wdt.c \
main.c \
mbedtls/mbedtls_port.c \
mimxrt_flash.c \
mimxrt_sdram.c \
modmachine.c \
modmimxrt.c \
modutime.c \
mphalport.c \
mpnetworkport.c \
network_lan.c \
pendsv.c \
pin.c \
sdcard.c \
systick.c \
ticks.c \
tusb_port.c \
SHARED_SRC_C += \
shared/libc/printf.c \
shared/libc/string0.c \
shared/netutils/dhcpserver.c \
shared/netutils/netutils.c \
shared/netutils/trace.c \
shared/readline/readline.c \
shared/runtime/gchelper_native.c \
shared/runtime/interrupt_char.c \
shared/runtime/mpirq.c \
shared/runtime/pyexec.c \
shared/runtime/softtimer.c \
shared/runtime/stdout_helpers.c \
shared/runtime/sys_stdio_mphal.c \
shared/timeutils/timeutils.c \
# Add sources for respective board flash type
ifeq ($(MICROPY_HW_FLASH_TYPE),$(filter $(MICROPY_HW_FLASH_TYPE),qspi_nor_flash qspi_hyper_flash))
# Add hal/flexspi_nor_flash.c or hal/flashspi_hyper_flash.c respectively
SRC_HAL_C += hal/flexspi_$(subst qspi_,,$(MICROPY_HW_FLASH_TYPE)).c
#
# Add custom (board specific) or default configuration
ifeq ($(MICROPY_HW_BOARD_FLASH_FILES),1)
SRC_HAL_C += $(BOARD_DIR)/$(MICROPY_HW_FLASH_TYPE)_config.c
else
SRC_HAL_C += hal/$(MICROPY_HW_FLASH_TYPE)_config.c
endif
else
$(error Error: Unknown board flash type $(MICROPY_HW_FLASH_TYPE))
endif
# Math library source files
ifeq ($(MICROPY_FLOAT_IMPL),double)
LIBM_SRC_C += $(addprefix lib/libm_dbl/,\
__cos.c __expo2.c __fpclassify.c __rem_pio2.c __rem_pio2_large.c __signbit.c __sin.c __tan.c acos.c acosh.c \
asin.c asinh.c atan.c atan2.c atanh.c ceil.c copysign.c cos.c cosh.c erf.c exp.c expm1.c floor.c fmod.c \
frexp.c ldexp.c lgamma.c log.c log10.c log1p.c modf.c nearbyint.c pow.c rint.c round.c scalbn.c sin.c \
sinh.c tan.c tanh.c tgamma.c trunc.c)
#
ifeq ($(SUPPORTS_HARDWARE_FP_DOUBLE),1)
LIBM_SRC_C += lib/libm_dbl/thumb_vfp_sqrt.c
else
LIBM_SRC_C += lib/libm_dbl/sqrt.c
endif
else
LIBM_SRC_C += $(addprefix lib/libm/,\
acoshf.c asinfacosf.c asinhf.c atan2f.c atanf.c atanhf.c ef_rem_pio2.c erf_lgamma.c fmodf.c kf_cos.c \
kf_rem_pio2.c kf_sin.c kf_tan.c log1pf.c math.c nearbyintf.c roundf.c sf_cos.c sf_erf.c sf_frexp.c sf_ldexp.c \
sf_modf.c sf_sin.c sf_tan.c wf_lgamma.c wf_tgamma.c)
ifeq ($(SUPPORTS_HARDWARE_FP_SINGLE),1)
LIBM_SRC_C += lib/libm/thumb_vfp_sqrtf.c
else
LIBM_SRC_C += lib/libm/ef_sqrt.c
endif
endif
# Reset variables
SUPPORTS_HARDWARE_FP_SINGLE = 0
SUPPORTS_HARDWARE_FP_DOUBLE = 0
# Assembly source files
SRC_SS = \
$(MCU_DIR)/gcc/startup_$(MCU_SERIES)$(MCU_CORE).S \
hal/resethandler_MIMXRT10xx.S
SRC_S += shared/runtime/gchelper_m3.s \
# =============================================================================
# QSTR Sources
# =============================================================================
# List of sources for qstr extraction
SRC_QSTR += $(SRC_C) $(SHARED_SRC_C) $(GEN_PINS_SRC)
# =============================================================================
# Compiler Flags
# =============================================================================
CFLAGS += -g # always include debug info in the ELF
ifeq ($(DEBUG),1)
CFLAGS += -Og
else
CFLAGS += -Os -DNDEBUG
endif
# Set default values for optional variables
MICROPY_HW_SDRAM_AVAIL ?= 0
MICROPY_HW_SDRAM_SIZE ?= 0
MICROPY_PY_MACHINE_SDCARD ?= 0
# Configure default compiler flags
CFLAGS += \
$(INC) \
-D__START=main \
-D__STARTUP_CLEAR_BSS \
-D__STARTUP_INITIALIZE_RAMFUNCTION \
-DBOARD_$(BOARD) \
-DBOARD_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE) \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT \
-DCLOCK_CONFIG_H='<boards/$(MCU_SERIES)_clock_config.h>' \
-DCPU_$(MCU_SERIES)$(MCU_CORE) \
-DCPU_$(MCU_VARIANT) \
-DCPU_HEADER_H='<$(MCU_SERIES)$(MCU_CORE).h>' \
-DFSL_SDK_ENABLE_DRIVER_CACHE_CONTROL=1 \
-DI2C_RETRY_TIMES=1000000 \
-DMICROPY_HW_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE) \
-DMICROPY_HW_SDRAM_AVAIL=$(MICROPY_HW_SDRAM_AVAIL) \
-DMICROPY_HW_SDRAM_SIZE=$(MICROPY_HW_SDRAM_SIZE) \
-DMICROPY_PY_MACHINE_SDCARD=$(MICROPY_PY_MACHINE_SDCARD) \
-DSPI_RETRY_TIMES=1000000 \
-DUART_RETRY_TIMES=1000000 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DXIP_EXTERNAL_FLASH=1 \
-fdata-sections \
-ffunction-sections \
-mcpu=cortex-m7 \
-mthumb \
-mtune=cortex-m7 \
-nostdlib \
-std=c99 \
-Wall \
-Wdouble-promotion \
-Werror \
-Wfloat-conversion \
-Wno-error=unused-parameter
# Configure respective board flash type
ifeq ($(MICROPY_HW_FLASH_TYPE),$(filter $(MICROPY_HW_FLASH_TYPE),qspi_nor_flash qspi_hyper_flash))
# Add hal/flexspi_nor_flash.h or hal/flexspi_hyper_flash.h respectively
CFLAGS += -DBOARD_FLASH_OPS_HEADER_H=\"hal/flexspi_$(subst qspi_,,$(MICROPY_HW_FLASH_TYPE)).h\"
#
# Add custom (board specific) or default configuration
ifeq ($(MICROPY_HW_BOARD_FLASH_FILES),1)
CFLAGS += -DBOARD_FLASH_CONFIG_HEADER_H=\"$(BOARD)_flexspi_flash_config.h\"
else
CFLAGS += -DBOARD_FLASH_CONFIG_HEADER_H=\"hal/flexspi_flash_config.h\"
endif
else
$(error Error: Unknown board flash type $(MICROPY_HW_FLASH_TYPE))
endif
# Configure floating point support
ifeq ($(MICROPY_FLOAT_IMPL),single)
CFLAGS += \
-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_FLOAT \
-fsingle-precision-constant \
-mfloat-abi=softfp \
-mfpu=fpv5-sp-d16
else ifeq ($(MICROPY_FLOAT_IMPL),double)
CFLAGS += \
-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_DOUBLE \
-mfloat-abi=hard \
-mfpu=fpv5-d16
else ifeq ($(MICROPY_FLOAT_IMPL),none)
CFLAGS += \
-DMICROPY_FLOAT_IMPL=MICROPY_FLOAT_IMPL_NONE
else
$(error Error: Unknown floating point implementation $(MICROPY_FLOAT_IMPL))
endif
# All settings for Ethernet support are controller by the value of MICROPY_PY_LWIP
ifeq ($(MICROPY_PY_LWIP),1)
CFLAGS += \
-DFSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE=1
endif
CFLAGS += $(CFLAGS_EXTRA)
# =============================================================================
# Linker Flags
# =============================================================================
LDFLAGS += \
--cref \
--gc-sections \
--print-memory-usage \
-Map=$@.map
# LDDEFINES are used for link time adaptation of linker scripts, utilizing
# the C preprocessor. Therefore keep LDDEFINES separated from LDFLAGS!
LDDEFINES = \
-DMICROPY_HW_FLASH_TYPE=$(MICROPY_HW_FLASH_TYPE) \
-DMICROPY_HW_FLASH_SIZE=$(MICROPY_HW_FLASH_SIZE)
ifdef MICROPY_HW_FLASH_RESERVED
LDDEFINES += -DMICROPY_HW_FLASH_RESERVED=$(MICROPY_HW_FLASH_RESERVED)
endif
ifdef MICROPY_HW_SDRAM_AVAIL
LDDEFINES += \
-DMICROPY_HW_SDRAM_AVAIL=$(MICROPY_HW_SDRAM_AVAIL) \
-DMICROPY_HW_SDRAM_SIZE=$(MICROPY_HW_SDRAM_SIZE)
endif
# =============================================================================
# Library and Object files
# =============================================================================
LIBS = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
LIBM_O = $(addprefix $(BUILD)/, $(LIBM_SRC_C:.c=.o))
# Too many warnings in libm_dbl, disable for now.
ifeq ($(MICROPY_FLOAT_IMPL),double)
$(LIBM_O): CFLAGS := $(filter-out -Wdouble-promotion -Wfloat-conversion, $(CFLAGS))
endif
OBJ += $(PY_O)
OBJ += $(LIBM_O)
OBJ += $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SHARED_SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.s=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SS:.S=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_TINYUSB_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_HAL_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_HAL_IMX_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_ETH_C:.c=.o))
OBJ += $(GEN_PINS_SRC:.c=.o)
# Workaround for bug in older gcc, warning on "static usbd_device_t _usbd_dev = { 0 };"
$(BUILD)/lib/tinyusb/src/device/usbd.o: CFLAGS += -Wno-missing-braces
# =============================================================================
# Build targets
# =============================================================================
all: $(BUILD)/firmware.hex $(BUILD)/firmware.bin
# Process linker scripts with C preprocessor to exchange LDDEFINES and
# aggregate output of preprocessor in a single linker script `link.ld`
$(BUILD)/firmware.elf: $(OBJ)
$(ECHO) "PREPROCESS LINK $@"
$(Q)$(CC) -E -x c $(LDDEFINES) $(LD_FILES) | grep -v '^#' > $(BUILD)/link.ld
$(ECHO) "LINK $@"
$(Q)$(LD) -T$(BUILD)/link.ld $(LDFLAGS) -o $@ $^ $(LIBS)
$(Q)$(SIZE) $@
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(Q)$(OBJCOPY) -O binary $^ $@
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(Q)$(OBJCOPY) -O ihex -R .eeprom $< $@
# Making OBJ use an order-only dependency on the generated pins.h file
# has the side effect of making the pins.h file before we actually compile
# any of the objects. The normal dependency generation will deal with the
# case when pins.h is modified. But when it doesn't exist, we don't know
# which source files might need it.
$(OBJ): | $(GEN_PINS_HDR) $(GEN_FLEXRAM_CONFIG_SRC)
# With conditional pins, we may need to regenerate qstrdefs.h when config
# options change.
$(HEADER_BUILD)/qstrdefs.generated.h: $(BOARD_DIR)/mpconfigboard.h
$(GEN_FLEXRAM_CONFIG_SRC):
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(MAKE_FLEXRAM_LD) -d $(TOP)/$(MCU_DIR)/$(MCU_SERIES)$(MCU_CORE).h \
-f $(TOP)/$(MCU_DIR)/$(MCU_SERIES)$(MCU_CORE)_features.h -l boards/$(MCU_SERIES).ld -c $(MCU_SERIES) > $(GEN_FLEXRAM_CONFIG_SRC)
# Use a pattern rule here so that make will only call make-pins.py once to make
# both pins_gen.c and pins.h
$(BUILD)/%_gen.c $(HEADER_BUILD)/%.h: $(BOARD_PINS) $(MAKE_PINS) $(AF_FILE) $(PREFIX_FILE) | $(HEADER_BUILD)
$(ECHO) "Create $@"
$(Q)$(PYTHON) $(MAKE_PINS) --board $(BOARD_PINS) --af $(AF_FILE)\
--iomux $(abspath $(TOP)/$(MCU_DIR)/drivers/fsl_iomuxc.h) \
--prefix $(PREFIX_FILE) --hdr $(GEN_PINS_HDR) > $(GEN_PINS_SRC)
$(GEN_PINS_SRC:.c=.o): $(GEN_PINS_SRC)
$(call compile_c)
include $(TOP)/py/mkrules.mk
Reference in New Issue View Git Blame Copy Permalink