circuitpython/teensy
Dan Peirce f0c3a7e781 teensy/README.md (corrected typo) 2014-08-16 11:54:36 +01:00
..
core Add core files and use same toolchain as stmhal 2014-07-14 22:48:22 -07:00
memzip_files Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
Makefile stmhal/teensy: Use _ instead of - in source file names. 2014-08-08 22:34:06 +01:00
README.md teensy/README.md (corrected typo) 2014-08-16 11:54:36 +01:00
add-memzip.sh Added memzip filesystem support for teensy 2014-01-11 16:16:20 -08:00
hal_gpio.c Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
help.c Updated teensy to build. 2014-06-15 22:48:05 -07:00
import.c Fix teensy to build on latest tree. 2014-07-14 22:19:27 -07:00
lcd.c Updated teensy to build. 2014-06-15 22:48:05 -07:00
led.c Fix teensy to build on latest tree. 2014-07-14 22:19:27 -07:00
led.h Updated teensy to build. 2014-06-15 22:48:05 -07:00
lexerfatfs.c Updated teensy to build. 2014-06-15 22:48:05 -07:00
lexermemzip.c Fix teensy to build on latest tree. 2014-07-14 22:19:27 -07:00
lexermemzip.h Added memzip filesystem support for teensy 2014-01-11 16:16:20 -08:00
main.c Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
make-pins.py Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
memzip.c Fix teensy to build on latest tree. 2014-07-14 22:19:27 -07:00
memzip.h Updated teensy to build. 2014-06-15 22:48:05 -07:00
mk20dx256.ld Updated teensy to build. 2014-06-15 22:48:05 -07:00
mk20dx256_af.csv stmhal/teensy: Use _ instead of - in source file names. 2014-08-08 22:34:06 +01:00
mk20dx256_prefix.c stmhal/teensy: Use _ instead of - in source file names. 2014-08-08 22:34:06 +01:00
modpyb.c Fix teensy to work with the latest tree. 2014-08-02 21:28:32 -07:00
mpconfigport.h Fix teensy to build on latest tree. 2014-07-14 22:19:27 -07:00
pin_defs_teensy.c Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
pin_defs_teensy.h Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
qstrdefsport.h Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
servo.c py: Change nlr_jump to nlr_raise, to aid in debugging. 2014-04-05 18:32:08 +01:00
servo.h Updated teensy to build. 2014-06-15 22:48:05 -07:00
std.h stm: Remove unused, useless and not-to-be-used strndup. 2014-02-10 22:55:15 +00:00
teensy_hal.c Merge branch 'teensy-new' of github.com:dhylands/micropython into dhylands-teensy-new 2014-07-02 13:42:37 +01:00
teensy_hal.h Add support for selecting pin alternate functions from python. 2014-08-07 23:15:41 -07:00
teensy_pins.csv stmhal/teensy: Use _ instead of - in source file names. 2014-08-08 22:34:06 +01:00
uart.c Fix teensy to build on latest tree. 2014-07-14 22:19:27 -07:00
usb.c Updated teensys usb.c and switched to using usb.h from stmhal. 2014-08-03 10:03:02 -07:00

README.md

Build Instructions for Teensy 3.1

Currently the Teensy 3.1 port of Micro Python builds under Linux and not under Windows.

The tool chain required for the build can be found at https://launchpad.net/gcc-arm-embedded.

Downlaod the current Linux *.tar.bz2 file. Instructions regarding unpacking the file and moving it to the correct location as well as adding the extracted folders to the enviroment variable can be found at http://eliaselectronics.com/stm32f4-tutorials/setting-up-the-stm32f4-arm-development-toolchain/

Previous Instructions Shown Below (no longer valid)

This assumes that you have TeensyDuino installed and set the ARDUINO environment variable pointing to the where Arduino with TeensyDuino is installed.

cd teensy
ARDUINO=~/arduino-1.0.5 make

To upload micropython to the Teensy 3.1.

Press the Program button on the Teensy 3.1

make upload

Currently, the python prompt is through the USB serial interface.