218606351c
This is a simple rename of the files, no content changes (other than updating index.rst to use the new paths) Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
741 lines
32 KiB
ReStructuredText
741 lines
32 KiB
ReStructuredText
:mod:`ubluetooth` --- low-level Bluetooth
|
|
=========================================
|
|
|
|
.. module:: ubluetooth
|
|
:synopsis: Low-level Bluetooth radio functionality
|
|
|
|
This module provides an interface to a Bluetooth controller on a board.
|
|
Currently this supports Bluetooth Low Energy (BLE) in Central, Peripheral,
|
|
Broadcaster, and Observer roles, as well as GATT Server and Client and L2CAP
|
|
connection-oriented-channels. A device may operate in multiple roles
|
|
concurrently. Pairing (and bonding) is supported on some ports.
|
|
|
|
This API is intended to match the low-level Bluetooth protocol and provide
|
|
building-blocks for higher-level abstractions such as specific device types.
|
|
|
|
.. note:: This module is still under development and its classes, functions,
|
|
methods and constants are subject to change.
|
|
|
|
class BLE
|
|
---------
|
|
|
|
Constructor
|
|
-----------
|
|
|
|
.. class:: BLE()
|
|
|
|
Returns the singleton BLE object.
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
.. method:: BLE.active([active], /)
|
|
|
|
Optionally changes the active state of the BLE radio, and returns the
|
|
current state.
|
|
|
|
The radio must be made active before using any other methods on this class.
|
|
|
|
.. method:: BLE.config('param', /)
|
|
BLE.config(*, param=value, ...)
|
|
|
|
Get or set configuration values of the BLE interface. To get a value the
|
|
parameter name should be quoted as a string, and just one parameter is
|
|
queried at a time. To set values use the keyword syntax, and one ore more
|
|
parameter can be set at a time.
|
|
|
|
Currently supported values are:
|
|
|
|
- ``'mac'``: The current address in use, depending on the current address mode.
|
|
This returns a tuple of ``(addr_type, addr)``.
|
|
|
|
See :meth:`gatts_write <BLE.gap_scan>` for details about address type.
|
|
|
|
This may only be queried while the interface is currently active.
|
|
|
|
- ``'addr_mode'``: Sets the address mode. Values can be:
|
|
|
|
* 0x00 - PUBLIC - Use the controller's public address.
|
|
* 0x01 - RANDOM - Use a generated static address.
|
|
* 0x02 - RPA - Use resolvable private addresses.
|
|
* 0x03 - NRPA - Use non-resolvable private addresses.
|
|
|
|
By default the interface mode will use a PUBLIC address if available, otherwise
|
|
it will use a RANDOM address.
|
|
|
|
- ``'gap_name'``: Get/set the GAP device name used by service 0x1800,
|
|
characteristic 0x2a00. This can be set at any time and changed multiple
|
|
times.
|
|
|
|
- ``'rxbuf'``: Get/set the size in bytes of the internal buffer used to store
|
|
incoming events. This buffer is global to the entire BLE driver and so
|
|
handles incoming data for all events, including all characteristics.
|
|
Increasing this allows better handling of bursty incoming data (for
|
|
example scan results) and the ability to receive larger characteristic values.
|
|
|
|
- ``'mtu'``: Get/set the MTU that will be used during a ATT MTU exchange. The
|
|
resulting MTU will be the minimum of this and the remote device's MTU.
|
|
ATT MTU exchange will not happen automatically (unless the remote device initiates
|
|
it), and must be manually initiated with
|
|
:meth:`gattc_exchange_mtu<BLE.gattc_exchange_mtu>`.
|
|
Use the ``_IRQ_MTU_EXCHANGED`` event to discover the MTU for a given connection.
|
|
|
|
- ``'bond'``: Sets whether bonding will be enabled during pairing. When
|
|
enabled, pairing requests will set the "bond" flag and the keys will be stored
|
|
by both devices.
|
|
|
|
- ``'mitm'``: Sets whether MITM-protection is required for pairing.
|
|
|
|
- ``'io'``: Sets the I/O capabilities of this device.
|
|
|
|
Available options are::
|
|
|
|
_IO_CAPABILITY_DISPLAY_ONLY = const(0)
|
|
_IO_CAPABILITY_DISPLAY_YESNO = const(1)
|
|
_IO_CAPABILITY_KEYBOARD_ONLY = const(2)
|
|
_IO_CAPABILITY_NO_INPUT_OUTPUT = const(3)
|
|
_IO_CAPABILITY_KEYBOARD_DISPLAY = const(4)
|
|
|
|
- ``'le_secure'``: Sets whether "LE Secure" pairing is required. Default is
|
|
false (i.e. allow "Legacy Pairing").
|
|
|
|
Event Handling
|
|
--------------
|
|
|
|
.. method:: BLE.irq(handler, /)
|
|
|
|
Registers a callback for events from the BLE stack. The *handler* takes two
|
|
arguments, ``event`` (which will be one of the codes below) and ``data``
|
|
(which is an event-specific tuple of values).
|
|
|
|
**Note:** As an optimisation to prevent unnecessary allocations, the ``addr``,
|
|
``adv_data``, ``char_data``, ``notify_data``, and ``uuid`` entries in the
|
|
tuples are read-only memoryview instances pointing to ubluetooth's internal
|
|
ringbuffer, and are only valid during the invocation of the IRQ handler
|
|
function. If your program needs to save one of these values to access after
|
|
the IRQ handler has returned (e.g. by saving it in a class instance or global
|
|
variable), then it needs to take a copy of the data, either by using ``bytes()``
|
|
or ``bluetooth.UUID()``, like this::
|
|
|
|
connected_addr = bytes(addr) # equivalently: adv_data, char_data, or notify_data
|
|
matched_uuid = bluetooth.UUID(uuid)
|
|
|
|
For example, the IRQ handler for a scan result might inspect the ``adv_data``
|
|
to decide if it's the correct device, and only then copy the address data to be
|
|
used elsewhere in the program. And to print data from within the IRQ handler,
|
|
``print(bytes(addr))`` will be needed.
|
|
|
|
An event handler showing all possible events::
|
|
|
|
def bt_irq(event, data):
|
|
if event == _IRQ_CENTRAL_CONNECT:
|
|
# A central has connected to this peripheral.
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_CENTRAL_DISCONNECT:
|
|
# A central has disconnected from this peripheral.
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_GATTS_WRITE:
|
|
# A client has written to this characteristic or descriptor.
|
|
conn_handle, attr_handle = data
|
|
elif event == _IRQ_GATTS_READ_REQUEST:
|
|
# A client has issued a read. Note: this is only supported on STM32.
|
|
# Return a non-zero integer to deny the read (see below), or zero (or None)
|
|
# to accept the read.
|
|
conn_handle, attr_handle = data
|
|
elif event == _IRQ_SCAN_RESULT:
|
|
# A single scan result.
|
|
addr_type, addr, adv_type, rssi, adv_data = data
|
|
elif event == _IRQ_SCAN_DONE:
|
|
# Scan duration finished or manually stopped.
|
|
pass
|
|
elif event == _IRQ_PERIPHERAL_CONNECT:
|
|
# A successful gap_connect().
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_PERIPHERAL_DISCONNECT:
|
|
# Connected peripheral has disconnected.
|
|
conn_handle, addr_type, addr = data
|
|
elif event == _IRQ_GATTC_SERVICE_RESULT:
|
|
# Called for each service found by gattc_discover_services().
|
|
conn_handle, start_handle, end_handle, uuid = data
|
|
elif event == _IRQ_GATTC_SERVICE_DONE:
|
|
# Called once service discovery is complete.
|
|
# Note: Status will be zero on success, implementation-specific value otherwise.
|
|
conn_handle, status = data
|
|
elif event == _IRQ_GATTC_CHARACTERISTIC_RESULT:
|
|
# Called for each characteristic found by gattc_discover_services().
|
|
conn_handle, def_handle, value_handle, properties, uuid = data
|
|
elif event == _IRQ_GATTC_CHARACTERISTIC_DONE:
|
|
# Called once service discovery is complete.
|
|
# Note: Status will be zero on success, implementation-specific value otherwise.
|
|
conn_handle, status = data
|
|
elif event == _IRQ_GATTC_DESCRIPTOR_RESULT:
|
|
# Called for each descriptor found by gattc_discover_descriptors().
|
|
conn_handle, dsc_handle, uuid = data
|
|
elif event == _IRQ_GATTC_DESCRIPTOR_DONE:
|
|
# Called once service discovery is complete.
|
|
# Note: Status will be zero on success, implementation-specific value otherwise.
|
|
conn_handle, status = data
|
|
elif event == _IRQ_GATTC_READ_RESULT:
|
|
# A gattc_read() has completed.
|
|
conn_handle, value_handle, char_data = data
|
|
elif event == _IRQ_GATTC_READ_DONE:
|
|
# A gattc_read() has completed.
|
|
# Note: The value_handle will be zero on btstack (but present on NimBLE).
|
|
# Note: Status will be zero on success, implementation-specific value otherwise.
|
|
conn_handle, value_handle, status = data
|
|
elif event == _IRQ_GATTC_WRITE_DONE:
|
|
# A gattc_write() has completed.
|
|
# Note: The value_handle will be zero on btstack (but present on NimBLE).
|
|
# Note: Status will be zero on success, implementation-specific value otherwise.
|
|
conn_handle, value_handle, status = data
|
|
elif event == _IRQ_GATTC_NOTIFY:
|
|
# A server has sent a notify request.
|
|
conn_handle, value_handle, notify_data = data
|
|
elif event == _IRQ_GATTC_INDICATE:
|
|
# A server has sent an indicate request.
|
|
conn_handle, value_handle, notify_data = data
|
|
elif event == _IRQ_GATTS_INDICATE_DONE:
|
|
# A client has acknowledged the indication.
|
|
# Note: Status will be zero on successful acknowledgment, implementation-specific value otherwise.
|
|
conn_handle, value_handle, status = data
|
|
elif event == _IRQ_MTU_EXCHANGED:
|
|
# ATT MTU exchange complete (either initiated by us or the remote device).
|
|
conn_handle, mtu = data
|
|
elif event == _IRQ_L2CAP_ACCEPT:
|
|
# A new channel has been accepted.
|
|
# Return a non-zero integer to reject the connection, or zero (or None) to accept.
|
|
conn_handle, cid, psm, our_mtu, peer_mtu = data
|
|
elif event == _IRQ_L2CAP_CONNECT:
|
|
# A new channel is now connected (either as a result of connecting or accepting).
|
|
conn_handle, cid, psm, our_mtu, peer_mtu = data
|
|
elif event == _IRQ_L2CAP_DISCONNECT:
|
|
# Existing channel has disconnected (status is zero), or a connection attempt failed (non-zero status).
|
|
conn_handle, cid, psm, status = data
|
|
elif event == _IRQ_L2CAP_RECV:
|
|
# New data is available on the channel. Use l2cap_recvinto to read.
|
|
conn_handle, cid = data
|
|
elif event == _IRQ_L2CAP_SEND_READY:
|
|
# A previous l2cap_send that returned False has now completed and the channel is ready to send again.
|
|
# If status is non-zero, then the transmit buffer overflowed and the application should re-send the data.
|
|
conn_handle, cid, status = data
|
|
elif event == _IRQ_CONNECTION_UPDATE:
|
|
# The remote device has updated connection parameters.
|
|
conn_handle, conn_interval, conn_latency, supervision_timeout, status = data
|
|
elif event == _IRQ_ENCRYPTION_UPDATE:
|
|
# The encryption state has changed (likely as a result of pairing or bonding).
|
|
conn_handle, encrypted, authenticated, bonded, key_size = data
|
|
elif event == _IRQ_GET_SECRET:
|
|
# Return a stored secret.
|
|
# If key is None, return the index'th value of this sec_type.
|
|
# Otherwise return the corresponding value for this sec_type and key.
|
|
sec_type, index, key = data
|
|
return value
|
|
elif event == _IRQ_SET_SECRET:
|
|
# Save a secret to the store for this sec_type and key.
|
|
sec_type, key, value = data
|
|
return True
|
|
elif event == _IRQ_PASSKEY_ACTION:
|
|
# Respond to a passkey request during pairing.
|
|
# See gap_passkey() for details.
|
|
# action will be an action that is compatible with the configured "io" config.
|
|
# passkey will be non-zero if action is "numeric comparison".
|
|
conn_handle, action, passkey = data
|
|
|
|
|
|
The event codes are::
|
|
|
|
from micropython import const
|
|
_IRQ_CENTRAL_CONNECT = const(1)
|
|
_IRQ_CENTRAL_DISCONNECT = const(2)
|
|
_IRQ_GATTS_WRITE = const(3)
|
|
_IRQ_GATTS_READ_REQUEST = const(4)
|
|
_IRQ_SCAN_RESULT = const(5)
|
|
_IRQ_SCAN_DONE = const(6)
|
|
_IRQ_PERIPHERAL_CONNECT = const(7)
|
|
_IRQ_PERIPHERAL_DISCONNECT = const(8)
|
|
_IRQ_GATTC_SERVICE_RESULT = const(9)
|
|
_IRQ_GATTC_SERVICE_DONE = const(10)
|
|
_IRQ_GATTC_CHARACTERISTIC_RESULT = const(11)
|
|
_IRQ_GATTC_CHARACTERISTIC_DONE = const(12)
|
|
_IRQ_GATTC_DESCRIPTOR_RESULT = const(13)
|
|
_IRQ_GATTC_DESCRIPTOR_DONE = const(14)
|
|
_IRQ_GATTC_READ_RESULT = const(15)
|
|
_IRQ_GATTC_READ_DONE = const(16)
|
|
_IRQ_GATTC_WRITE_DONE = const(17)
|
|
_IRQ_GATTC_NOTIFY = const(18)
|
|
_IRQ_GATTC_INDICATE = const(19)
|
|
_IRQ_GATTS_INDICATE_DONE = const(20)
|
|
_IRQ_MTU_EXCHANGED = const(21)
|
|
_IRQ_L2CAP_ACCEPT = const(22)
|
|
_IRQ_L2CAP_CONNECT = const(23)
|
|
_IRQ_L2CAP_DISCONNECT = const(24)
|
|
_IRQ_L2CAP_RECV = const(25)
|
|
_IRQ_L2CAP_SEND_READY = const(26)
|
|
_IRQ_CONNECTION_UPDATE = const(27)
|
|
_IRQ_ENCRYPTION_UPDATE = const(28)
|
|
_IRQ_GET_SECRET = const(29)
|
|
_IRQ_SET_SECRET = const(30)
|
|
|
|
For the ``_IRQ_GATTS_READ_REQUEST`` event, the available return codes are::
|
|
|
|
_GATTS_NO_ERROR = const(0x00)
|
|
_GATTS_ERROR_READ_NOT_PERMITTED = const(0x02)
|
|
_GATTS_ERROR_WRITE_NOT_PERMITTED = const(0x03)
|
|
_GATTS_ERROR_INSUFFICIENT_AUTHENTICATION = const(0x05)
|
|
_GATTS_ERROR_INSUFFICIENT_AUTHORIZATION = const(0x08)
|
|
_GATTS_ERROR_INSUFFICIENT_ENCRYPTION = const(0x0f)
|
|
|
|
For the ``_IRQ_PASSKEY_ACTION`` event, the available actions are::
|
|
|
|
_PASSKEY_ACTION_NONE = const(0)
|
|
_PASSKEY_ACTION_INPUT = const(2)
|
|
_PASSKEY_ACTION_DISPLAY = const(3)
|
|
_PASSKEY_ACTION_NUMERIC_COMPARISON = const(4)
|
|
|
|
In order to save space in the firmware, these constants are not included on the
|
|
:mod:`ubluetooth` module. Add the ones that you need from the list above to your
|
|
program.
|
|
|
|
|
|
Broadcaster Role (Advertiser)
|
|
-----------------------------
|
|
|
|
.. method:: BLE.gap_advertise(interval_us, adv_data=None, *, resp_data=None, connectable=True)
|
|
|
|
Starts advertising at the specified interval (in **micro**\ seconds). This
|
|
interval will be rounded down to the nearest 625us. To stop advertising, set
|
|
*interval_us* to ``None``.
|
|
|
|
*adv_data* and *resp_data* can be any type that implements the buffer
|
|
protocol (e.g. ``bytes``, ``bytearray``, ``str``). *adv_data* is included
|
|
in all broadcasts, and *resp_data* is send in reply to an active scan.
|
|
|
|
**Note:** if *adv_data* (or *resp_data*) is ``None``, then the data passed
|
|
to the previous call to ``gap_advertise`` will be re-used. This allows a
|
|
broadcaster to resume advertising with just ``gap_advertise(interval_us)``.
|
|
To clear the advertising payload pass an empty ``bytes``, i.e. ``b''``.
|
|
|
|
|
|
Observer Role (Scanner)
|
|
-----------------------
|
|
|
|
.. method:: BLE.gap_scan(duration_ms, interval_us=1280000, window_us=11250, active=False, /)
|
|
|
|
Run a scan operation lasting for the specified duration (in **milli**\ seconds).
|
|
|
|
To scan indefinitely, set *duration_ms* to ``0``.
|
|
|
|
To stop scanning, set *duration_ms* to ``None``.
|
|
|
|
Use *interval_us* and *window_us* to optionally configure the duty cycle.
|
|
The scanner will run for *window_us* **micro**\ seconds every *interval_us*
|
|
**micro**\ seconds for a total of *duration_ms* **milli**\ seconds. The default
|
|
interval and window are 1.28 seconds and 11.25 milliseconds respectively
|
|
(background scanning).
|
|
|
|
For each scan result the ``_IRQ_SCAN_RESULT`` event will be raised, with event
|
|
data ``(addr_type, addr, adv_type, rssi, adv_data)``.
|
|
|
|
``addr_type`` values indicate public or random addresses:
|
|
* 0x00 - PUBLIC
|
|
* 0x01 - RANDOM (either static, RPA, or NRPA, the type is encoded in the address itself)
|
|
|
|
``adv_type`` values correspond to the Bluetooth Specification:
|
|
|
|
* 0x00 - ADV_IND - connectable and scannable undirected advertising
|
|
* 0x01 - ADV_DIRECT_IND - connectable directed advertising
|
|
* 0x02 - ADV_SCAN_IND - scannable undirected advertising
|
|
* 0x03 - ADV_NONCONN_IND - non-connectable undirected advertising
|
|
* 0x04 - SCAN_RSP - scan response
|
|
|
|
``active`` can be set ``True`` if you want to receive scan responses in the results.
|
|
|
|
When scanning is stopped (either due to the duration finishing or when
|
|
explicitly stopped), the ``_IRQ_SCAN_DONE`` event will be raised.
|
|
|
|
|
|
Central Role
|
|
------------
|
|
|
|
A central device can connect to peripherals that it has discovered using the observer role (see :meth:`gap_scan<BLE.gap_scan>`) or with a known address.
|
|
|
|
.. method:: BLE.gap_connect(addr_type, addr, scan_duration_ms=2000, /)
|
|
|
|
Connect to a peripheral.
|
|
|
|
See :meth:`gap_scan <BLE.gap_scan>` for details about address types.
|
|
|
|
On success, the ``_IRQ_PERIPHERAL_CONNECT`` event will be raised.
|
|
|
|
|
|
Peripheral Role
|
|
---------------
|
|
|
|
A peripheral device is expected to send connectable advertisements (see
|
|
:meth:`gap_advertise<BLE.gap_advertise>`). It will usually be acting as a GATT
|
|
server, having first registered services and characteristics using
|
|
:meth:`gatts_register_services<BLE.gatts_register_services>`.
|
|
|
|
When a central connects, the ``_IRQ_CENTRAL_CONNECT`` event will be raised.
|
|
|
|
|
|
Central & Peripheral Roles
|
|
--------------------------
|
|
|
|
.. method:: BLE.gap_disconnect(conn_handle, /)
|
|
|
|
Disconnect the specified connection handle. This can either be a
|
|
central that has connected to this device (if acting as a peripheral)
|
|
or a peripheral that was previously connected to by this device (if acting
|
|
as a central).
|
|
|
|
On success, the ``_IRQ_PERIPHERAL_DISCONNECT`` or ``_IRQ_CENTRAL_DISCONNECT``
|
|
event will be raised.
|
|
|
|
Returns ``False`` if the connection handle wasn't connected, and ``True``
|
|
otherwise.
|
|
|
|
|
|
GATT Server
|
|
-----------
|
|
|
|
A GATT server has a set of registered services. Each service may contain
|
|
characteristics, which each have a value. Characteristics can also contain
|
|
descriptors, which themselves have values.
|
|
|
|
These values are stored locally, and are accessed by their "value handle" which
|
|
is generated during service registration. They can also be read from or written
|
|
to by a remote client device. Additionally, a server can "notify" a
|
|
characteristic to a connected client via a connection handle.
|
|
|
|
A device in either central or peripheral roles may function as a GATT server,
|
|
however in most cases it will be more common for a peripheral device to act
|
|
as the server.
|
|
|
|
Characteristics and descriptors have a default maximum size of 20 bytes.
|
|
Anything written to them by a client will be truncated to this length. However,
|
|
any local write will increase the maximum size, so if you want to allow larger
|
|
writes from a client to a given characteristic, use
|
|
:meth:`gatts_write<BLE.gatts_write>` after registration. e.g.
|
|
``gatts_write(char_handle, bytes(100))``.
|
|
|
|
.. method:: BLE.gatts_register_services(services_definition, /)
|
|
|
|
Configures the server with the specified services, replacing any
|
|
existing services.
|
|
|
|
*services_definition* is a list of **services**, where each **service** is a
|
|
two-element tuple containing a UUID and a list of **characteristics**.
|
|
|
|
Each **characteristic** is a two-or-three-element tuple containing a UUID, a
|
|
**flags** value, and optionally a list of *descriptors*.
|
|
|
|
Each **descriptor** is a two-element tuple containing a UUID and a **flags**
|
|
value.
|
|
|
|
The **flags** are a bitwise-OR combination of the flags defined below. These
|
|
set both the behaviour of the characteristic (or descriptor) as well as the
|
|
security and privacy requirements.
|
|
|
|
The return value is a list (one element per service) of tuples (each element
|
|
is a value handle). Characteristics and descriptor handles are flattened
|
|
into the same tuple, in the order that they are defined.
|
|
|
|
The following example registers two services (Heart Rate, and Nordic UART)::
|
|
|
|
HR_UUID = bluetooth.UUID(0x180D)
|
|
HR_CHAR = (bluetooth.UUID(0x2A37), bluetooth.FLAG_READ | bluetooth.FLAG_NOTIFY,)
|
|
HR_SERVICE = (HR_UUID, (HR_CHAR,),)
|
|
UART_UUID = bluetooth.UUID('6E400001-B5A3-F393-E0A9-E50E24DCCA9E')
|
|
UART_TX = (bluetooth.UUID('6E400003-B5A3-F393-E0A9-E50E24DCCA9E'), bluetooth.FLAG_READ | bluetooth.FLAG_NOTIFY,)
|
|
UART_RX = (bluetooth.UUID('6E400002-B5A3-F393-E0A9-E50E24DCCA9E'), bluetooth.FLAG_WRITE,)
|
|
UART_SERVICE = (UART_UUID, (UART_TX, UART_RX,),)
|
|
SERVICES = (HR_SERVICE, UART_SERVICE,)
|
|
( (hr,), (tx, rx,), ) = bt.gatts_register_services(SERVICES)
|
|
|
|
The three value handles (``hr``, ``tx``, ``rx``) can be used with
|
|
:meth:`gatts_read <BLE.gatts_read>`, :meth:`gatts_write <BLE.gatts_write>`, :meth:`gatts_notify <BLE.gatts_notify>`, and
|
|
:meth:`gatts_indicate <BLE.gatts_indicate>`.
|
|
|
|
**Note:** Advertising must be stopped before registering services.
|
|
|
|
Available flags for characteristics and descriptors are::
|
|
|
|
from micropython import const
|
|
_FLAG_BROADCAST = const(0x0001)
|
|
_FLAG_READ = const(0x0002)
|
|
_FLAG_WRITE_NO_RESPONSE = const(0x0004)
|
|
_FLAG_WRITE = const(0x0008)
|
|
_FLAG_NOTIFY = const(0x0010)
|
|
_FLAG_INDICATE = const(0x0020)
|
|
_FLAG_AUTHENTICATED_SIGNED_WRITE = const(0x0040)
|
|
|
|
_FLAG_AUX_WRITE = const(0x0100)
|
|
_FLAG_READ_ENCRYPTED = const(0x0200)
|
|
_FLAG_READ_AUTHENTICATED = const(0x0400)
|
|
_FLAG_READ_AUTHORIZED = const(0x0800)
|
|
_FLAG_WRITE_ENCRYPTED = const(0x1000)
|
|
_FLAG_WRITE_AUTHENTICATED = const(0x2000)
|
|
_FLAG_WRITE_AUTHORIZED = const(0x4000)
|
|
|
|
As for the IRQs above, any required constants should be added to your Python code.
|
|
|
|
.. method:: BLE.gatts_read(value_handle, /)
|
|
|
|
Reads the local value for this handle (which has either been written by
|
|
:meth:`gatts_write <BLE.gatts_write>` or by a remote client).
|
|
|
|
.. method:: BLE.gatts_write(value_handle, data, /)
|
|
|
|
Writes the local value for this handle, which can be read by a client.
|
|
|
|
.. method:: BLE.gatts_notify(conn_handle, value_handle, data=None, /)
|
|
|
|
Sends a notification request to a connected client.
|
|
|
|
If *data* is not ``None``, then that value is sent to the client as part of
|
|
the notification. The local value will not be modified.
|
|
|
|
Otherwise, if *data* is ``None``, then the current local value (as
|
|
set with :meth:`gatts_write <BLE.gatts_write>`) will be sent.
|
|
|
|
.. method:: BLE.gatts_indicate(conn_handle, value_handle, /)
|
|
|
|
Sends an indication request to a connected client.
|
|
|
|
**Note:** This does not currently support sending a custom value, it will
|
|
always send the current local value (as set with :meth:`gatts_write
|
|
<BLE.gatts_write>`).
|
|
|
|
On acknowledgment (or failure, e.g. timeout), the
|
|
``_IRQ_GATTS_INDICATE_DONE`` event will be raised.
|
|
|
|
.. method:: BLE.gatts_set_buffer(value_handle, len, append=False, /)
|
|
|
|
Sets the internal buffer size for a value in bytes. This will limit the
|
|
largest possible write that can be received. The default is 20.
|
|
|
|
Setting *append* to ``True`` will make all remote writes append to, rather
|
|
than replace, the current value. At most *len* bytes can be buffered in
|
|
this way. When you use :meth:`gatts_read <BLE.gatts_read>`, the value will
|
|
be cleared after reading. This feature is useful when implementing something
|
|
like the Nordic UART Service.
|
|
|
|
GATT Client
|
|
-----------
|
|
|
|
A GATT client can discover and read/write characteristics on a remote GATT server.
|
|
|
|
It is more common for a central role device to act as the GATT client, however
|
|
it's also possible for a peripheral to act as a client in order to discover
|
|
information about the central that has connected to it (e.g. to read the
|
|
device name from the device information service).
|
|
|
|
.. method:: BLE.gattc_discover_services(conn_handle, uuid=None, /)
|
|
|
|
Query a connected server for its services.
|
|
|
|
Optionally specify a service *uuid* to query for that service only.
|
|
|
|
For each service discovered, the ``_IRQ_GATTC_SERVICE_RESULT`` event will
|
|
be raised, followed by ``_IRQ_GATTC_SERVICE_DONE`` on completion.
|
|
|
|
.. method:: BLE.gattc_discover_characteristics(conn_handle, start_handle, end_handle, uuid=None, /)
|
|
|
|
Query a connected server for characteristics in the specified range.
|
|
|
|
Optionally specify a characteristic *uuid* to query for that
|
|
characteristic only.
|
|
|
|
You can use ``start_handle=1``, ``end_handle=0xffff`` to search for a
|
|
characteristic in any service.
|
|
|
|
For each characteristic discovered, the ``_IRQ_GATTC_CHARACTERISTIC_RESULT``
|
|
event will be raised, followed by ``_IRQ_GATTC_CHARACTERISTIC_DONE`` on completion.
|
|
|
|
.. method:: BLE.gattc_discover_descriptors(conn_handle, start_handle, end_handle, /)
|
|
|
|
Query a connected server for descriptors in the specified range.
|
|
|
|
For each descriptor discovered, the ``_IRQ_GATTC_DESCRIPTOR_RESULT`` event
|
|
will be raised, followed by ``_IRQ_GATTC_DESCRIPTOR_DONE`` on completion.
|
|
|
|
.. method:: BLE.gattc_read(conn_handle, value_handle, /)
|
|
|
|
Issue a remote read to a connected server for the specified
|
|
characteristic or descriptor handle.
|
|
|
|
When a value is available, the ``_IRQ_GATTC_READ_RESULT`` event will be
|
|
raised. Additionally, the ``_IRQ_GATTC_READ_DONE`` will be raised.
|
|
|
|
.. method:: BLE.gattc_write(conn_handle, value_handle, data, mode=0, /)
|
|
|
|
Issue a remote write to a connected server for the specified
|
|
characteristic or descriptor handle.
|
|
|
|
The argument *mode* specifies the write behaviour, with the currently
|
|
supported values being:
|
|
|
|
* ``mode=0`` (default) is a write-without-response: the write will
|
|
be sent to the remote server but no confirmation will be
|
|
returned, and no event will be raised.
|
|
* ``mode=1`` is a write-with-response: the remote server is
|
|
requested to send a response/acknowledgement that it received the
|
|
data.
|
|
|
|
If a response is received from the remote server the
|
|
``_IRQ_GATTC_WRITE_DONE`` event will be raised.
|
|
|
|
.. method:: BLE.gattc_exchange_mtu(conn_handle, /)
|
|
|
|
Initiate MTU exchange with a connected server, using the preferred MTU
|
|
set using ``BLE.config(mtu=value)``.
|
|
|
|
The ``_IRQ_MTU_EXCHANGED`` event will be raised when MTU exchange
|
|
completes.
|
|
|
|
**Note:** MTU exchange is typically initiated by the central. When using
|
|
the BlueKitchen stack in the central role, it does not support a remote
|
|
peripheral initiating the MTU exchange. NimBLE works for both roles.
|
|
|
|
|
|
L2CAP connection-oriented-channels
|
|
----------------------------------
|
|
|
|
This feature allows for socket-like data exchange between two BLE devices.
|
|
Once the devices are connected via GAP, either device can listen for the
|
|
other to connect on a numeric PSM (Protocol/Service Multiplexer).
|
|
|
|
**Note:** This is currently only supported when using the NimBLE stack on
|
|
STM32 and Unix (not ESP32). Only one L2CAP channel may be active at a given
|
|
time (i.e. you cannot connect while listening).
|
|
|
|
Active L2CAP channels are identified by the connection handle that they were
|
|
established on and a CID (channel ID).
|
|
|
|
Connection-oriented channels have built-in credit-based flow control. Unlike
|
|
ATT, where devices negotiate a shared MTU, both the listening and connecting
|
|
devices each set an independent MTU which limits the maximum amount of
|
|
outstanding data that the remote device can send before it is fully consumed
|
|
in :meth:`l2cap_recvinto <BLE.l2cap_recvinto>`.
|
|
|
|
.. method:: BLE.l2cap_listen(psm, mtu, /)
|
|
|
|
Start listening for incoming L2CAP channel requests on the specified *psm*
|
|
with the local MTU set to *mtu*.
|
|
|
|
When a remote device initiates a connection, the ``_IRQ_L2CAP_ACCEPT``
|
|
event will be raised, which gives the listening server a chance to reject
|
|
the incoming connection (by returning a non-zero integer).
|
|
|
|
Once the connection is accepted, the ``_IRQ_L2CAP_CONNECT`` event will be
|
|
raised, allowing the server to obtain the channel id (CID) and the local and
|
|
remote MTU.
|
|
|
|
**Note:** It is not currently possible to stop listening.
|
|
|
|
.. method:: BLE.l2cap_connect(conn_handle, psm, mtu, /)
|
|
|
|
Connect to a listening peer on the specified *psm* with local MTU set to *mtu*.
|
|
|
|
On successful connection, the the ``_IRQ_L2CAP_CONNECT`` event will be
|
|
raised, allowing the client to obtain the CID and the local and remote (peer) MTU.
|
|
|
|
An unsuccessful connection will raise the ``_IRQ_L2CAP_DISCONNECT`` event
|
|
with a non-zero status.
|
|
|
|
.. method:: BLE.l2cap_disconnect(conn_handle, cid, /)
|
|
|
|
Disconnect an active L2CAP channel with the specified *conn_handle* and
|
|
*cid*.
|
|
|
|
.. method:: BLE.l2cap_send(conn_handle, cid, buf, /)
|
|
|
|
Send the specified *buf* (which must support the buffer protocol) on the
|
|
L2CAP channel identified by *conn_handle* and *cid*.
|
|
|
|
The specified buffer cannot be larger than the remote (peer) MTU, and no
|
|
more than twice the size of the local MTU.
|
|
|
|
This will return ``False`` if the channel is now "stalled", which means that
|
|
:meth:`l2cap_send <BLE.l2cap_send>` must not be called again until the
|
|
``_IRQ_L2CAP_SEND_READY`` event is received (which will happen when the
|
|
remote device grants more credits, typically after it has received and
|
|
processed the data).
|
|
|
|
.. method:: BLE.l2cap_recvinto(conn_handle, cid, buf, /)
|
|
|
|
Receive data from the specified *conn_handle* and *cid* into the provided
|
|
*buf* (which must support the buffer protocol, e.g. bytearray or
|
|
memoryview).
|
|
|
|
Returns the number of bytes read from the channel.
|
|
|
|
If *buf* is None, then returns the number of bytes available.
|
|
|
|
**Note:** After receiving the ``_IRQ_L2CAP_RECV`` event, the application should
|
|
continue calling :meth:`l2cap_recvinto <BLE.l2cap_recvinto>` until no more
|
|
bytes are available in the receive buffer (typically up to the size of the
|
|
remote (peer) MTU).
|
|
|
|
Until the receive buffer is empty, the remote device will not be granted
|
|
more channel credits and will be unable to send any more data.
|
|
|
|
|
|
Pairing and bonding
|
|
-------------------
|
|
|
|
Pairing allows a connection to be encrypted and authenticated via exchange
|
|
of secrets (with optional MITM protection via passkey authentication).
|
|
|
|
Bonding is the process of storing those secrets into non-volatile storage.
|
|
When bonded, a device is able to resolve a resolvable private address (RPA)
|
|
from another device based on the stored identity resolving key (IRK).
|
|
To support bonding, an application must implement the ``_IRQ_GET_SECRET``
|
|
and ``_IRQ_SET_SECRET`` events.
|
|
|
|
**Note:** This is currently only supported when using the NimBLE stack on
|
|
STM32 and Unix (not ESP32).
|
|
|
|
.. method:: BLE.gap_pair(conn_handle, /)
|
|
|
|
Initiate pairing with the remote device.
|
|
|
|
Before calling this, ensure that the ``io``, ``mitm``, ``le_secure``, and
|
|
``bond`` configuration options are set (via :meth:`config<BLE.config>`).
|
|
|
|
On successful pairing, the ``_IRQ_ENCRYPTION_UPDATE`` event will be raised.
|
|
|
|
.. method:: BLE.gap_passkey(conn_handle, action, passkey, /)
|
|
|
|
Respond to a ``_IRQ_PASSKEY_ACTION`` event for the specified *conn_handle*
|
|
and *action*.
|
|
|
|
The *passkey* is a numeric value and will depend on on the
|
|
*action* (which will depend on what I/O capability has been set):
|
|
|
|
* When the *action* is ``_PASSKEY_ACTION_INPUT``, then the application should
|
|
prompt the user to enter the passkey that is shown on the remote device.
|
|
* When the *action* is ``_PASSKEY_ACTION_DISPLAY``, then the application should
|
|
generate a random 6-digit passkey and show it to the user.
|
|
* When the *action* is ``_PASSKEY_ACTION_NUMERIC_COMPARISON``, then the application
|
|
should show the passkey that was provided in the ``_IRQ_PASSKEY_ACTION`` event
|
|
and then respond with either ``0`` (cancel pairing), or ``1`` (accept pairing).
|
|
|
|
|
|
class UUID
|
|
----------
|
|
|
|
|
|
Constructor
|
|
-----------
|
|
|
|
.. class:: UUID(value, /)
|
|
|
|
Creates a UUID instance with the specified **value**.
|
|
|
|
The **value** can be either:
|
|
|
|
- A 16-bit integer. e.g. ``0x2908``.
|
|
- A 128-bit UUID string. e.g. ``'6E400001-B5A3-F393-E0A9-E50E24DCCA9E'``.
|