47fa723586
These include ADC, DAC, I2C, SoftI2C, SPI, SoftI2C, PWM, UART, pulse. This is useful for devices like the Adafruit Trinket series which have almost no accessible GPIO pins. Signed-off-by: robert-hh <robert@hammelrath.com>
339 lines
12 KiB
C
339 lines
12 KiB
C
/*
|
|
* This file is part of the MicroPython project, http://micropython.org/
|
|
*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2020-2021 Damien P. George
|
|
* Copyright (c) 2022 Robert Hammelrath
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "py/runtime.h"
|
|
|
|
#if MICROPY_PY_MACHINE_SPI
|
|
|
|
#include "py/mphal.h"
|
|
#include "extmod/machine_spi.h"
|
|
#include "modmachine.h"
|
|
#include "samd_soc.h"
|
|
#include "pin_af.h"
|
|
#include "clock_config.h"
|
|
|
|
#define DEFAULT_SPI_BAUDRATE (1000000)
|
|
#define DEFAULT_SPI_POLARITY (0)
|
|
#define DEFAULT_SPI_PHASE (0)
|
|
#define DEFAULT_SPI_BITS (8)
|
|
#define DEFAULT_SPI_FIRSTBIT (0)
|
|
|
|
typedef struct _machine_spi_obj_t {
|
|
mp_obj_base_t base;
|
|
uint8_t id;
|
|
uint8_t polarity;
|
|
uint8_t phase;
|
|
uint8_t firstbit;
|
|
uint8_t sck;
|
|
uint8_t mosi;
|
|
uint8_t miso;
|
|
uint8_t new;
|
|
uint32_t baudrate;
|
|
sercom_pad_config_t sck_pad_config;
|
|
sercom_pad_config_t mosi_pad_config;
|
|
sercom_pad_config_t miso_pad_config;
|
|
uint8_t *dest;
|
|
size_t rxlen;
|
|
} machine_spi_obj_t;
|
|
|
|
extern Sercom *sercom_instance[];
|
|
|
|
void common_spi_irq_handler(int spi_id) {
|
|
// handle Sercom IRQ RXC
|
|
machine_spi_obj_t *self = MP_STATE_PORT(sercom_table[spi_id]);
|
|
// Handle IRQ
|
|
if (self != NULL) {
|
|
Sercom *spi = sercom_instance[self->id];
|
|
if (spi->SPI.INTFLAG.bit.RXC != 0) {
|
|
if (self->rxlen > 0) {
|
|
*(self->dest)++ = spi->SPI.DATA.bit.DATA;
|
|
self->rxlen--;
|
|
} else {
|
|
// Just in the unlikely case there is data but no space in the buffer
|
|
// discard the data and clear the intflag
|
|
uint32_t temp;
|
|
(void)temp;
|
|
temp = spi->SPI.DATA.bit.DATA;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
STATIC void machine_spi_print(const mp_print_t *print, mp_obj_t self_in, mp_print_kind_t kind) {
|
|
machine_spi_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
mp_printf(print, "SPI(%u, baudrate=%u, firstbit=%u, polarity=%u, phase=%u, bits=8)",
|
|
self->id, self->baudrate, self->firstbit, self->polarity, self->phase);
|
|
}
|
|
|
|
STATIC void machine_spi_init(mp_obj_base_t *self_in, size_t n_args, const mp_obj_t *pos_args, mp_map_t *kw_args) {
|
|
enum { ARG_baudrate, ARG_polarity, ARG_phase, ARG_firstbit,
|
|
ARG_sck, ARG_mosi, ARG_miso};
|
|
static const mp_arg_t allowed_args[] = {
|
|
{ MP_QSTR_baudrate, MP_ARG_INT, {.u_int = -1} },
|
|
{ MP_QSTR_polarity, MP_ARG_INT, {.u_int = -1} },
|
|
{ MP_QSTR_phase, MP_ARG_INT, {.u_int = -1} },
|
|
{ MP_QSTR_firstbit, MP_ARG_INT, {.u_int = -1} },
|
|
{ MP_QSTR_sck, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_NONE} },
|
|
{ MP_QSTR_mosi, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_NONE} },
|
|
{ MP_QSTR_miso, MP_ARG_KW_ONLY | MP_ARG_OBJ, {.u_rom_obj = MP_ROM_NONE} },
|
|
};
|
|
|
|
machine_spi_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
|
|
// Parse args
|
|
mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)];
|
|
mp_arg_parse_all(n_args, pos_args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args);
|
|
|
|
// Set baudrate if configured.
|
|
if (args[ARG_baudrate].u_int >= 0) {
|
|
self->baudrate = args[ARG_baudrate].u_int;
|
|
}
|
|
|
|
// Set polarity if configured.
|
|
if (args[ARG_polarity].u_int >= 0) {
|
|
self->polarity = args[ARG_polarity].u_int;
|
|
}
|
|
|
|
// Set phase if configured.
|
|
if (args[ARG_phase].u_int >= 0) {
|
|
self->phase = args[ARG_phase].u_int;
|
|
}
|
|
|
|
// Set firstbit if configured.
|
|
if (args[ARG_firstbit].u_int >= 0) {
|
|
self->firstbit = args[ARG_firstbit].u_int;
|
|
}
|
|
|
|
// Set SCK/MOSI/MISO pins if configured.
|
|
if (args[ARG_sck].u_obj != mp_const_none) {
|
|
self->sck = mp_hal_get_pin_obj(args[ARG_sck].u_obj);
|
|
}
|
|
if (args[ARG_mosi].u_obj != mp_const_none) {
|
|
self->mosi = mp_hal_get_pin_obj(args[ARG_mosi].u_obj);
|
|
}
|
|
if (args[ARG_miso].u_obj != mp_const_none) {
|
|
self->miso = mp_hal_get_pin_obj(args[ARG_miso].u_obj);
|
|
}
|
|
|
|
// Initialise the SPI peripheral if any arguments given, or it was not initialised previously.
|
|
if (n_args > 0 || kw_args->used > 0 || self->new) {
|
|
self->new = false;
|
|
|
|
// Get the pad and alt-fct numbers.
|
|
self->sck_pad_config = get_sercom_config(self->sck, self->id);
|
|
self->mosi_pad_config = get_sercom_config(self->mosi, self->id);
|
|
|
|
uint8_t dopo = 0;
|
|
#if defined(MCU_SAMD21)
|
|
if (self->mosi_pad_config.pad_nr == 0 && self->sck_pad_config.pad_nr == 1) {
|
|
dopo = 0;
|
|
} else if (self->mosi_pad_config.pad_nr == 2 && self->sck_pad_config.pad_nr == 3) {
|
|
dopo = 1;
|
|
} else if (self->mosi_pad_config.pad_nr == 3 && self->sck_pad_config.pad_nr == 1) {
|
|
dopo = 2;
|
|
} else if (self->mosi_pad_config.pad_nr == 0 && self->sck_pad_config.pad_nr == 3) {
|
|
dopo = 3;
|
|
} else {
|
|
mp_raise_ValueError(MP_ERROR_TEXT("invalid pin for sck or mosi"));
|
|
}
|
|
#elif defined(MCU_SAMD51)
|
|
if (self->mosi_pad_config.pad_nr == 0 && self->sck_pad_config.pad_nr == 1) {
|
|
dopo = 0;
|
|
} else if (self->mosi_pad_config.pad_nr == 3 && self->sck_pad_config.pad_nr == 1) {
|
|
dopo = 2;
|
|
} else {
|
|
mp_raise_ValueError(MP_ERROR_TEXT("invalid pin for sck or mosi"));
|
|
}
|
|
#endif
|
|
|
|
if (self->miso != 0xff) { // Miso may be undefined
|
|
self->miso_pad_config = get_sercom_config(self->miso, self->id);
|
|
mp_hal_set_pin_mux(self->miso, self->miso_pad_config.alt_fct);
|
|
}
|
|
// Configure the Pin mux.
|
|
mp_hal_set_pin_mux(self->sck, self->sck_pad_config.alt_fct);
|
|
mp_hal_set_pin_mux(self->mosi, self->mosi_pad_config.alt_fct);
|
|
|
|
// Set up the clocks
|
|
enable_sercom_clock(self->id);
|
|
|
|
// Configure the SPI
|
|
Sercom *spi = sercom_instance[self->id];
|
|
// Reset (clear) the peripheral registers.
|
|
while (spi->SPI.SYNCBUSY.bit.SWRST) {
|
|
}
|
|
spi->SPI.CTRLA.bit.SWRST = 1;
|
|
while (spi->SPI.SYNCBUSY.bit.SWRST) {
|
|
}
|
|
|
|
// Set the registers
|
|
spi->SPI.CTRLA.bit.MODE = 0x03; // SPI master mode
|
|
spi->SPI.CTRLA.bit.CPOL = self->polarity;
|
|
spi->SPI.CTRLA.bit.CPHA = self->phase;
|
|
spi->SPI.CTRLA.bit.DIPO = self->miso_pad_config.pad_nr;
|
|
spi->SPI.CTRLA.bit.DOPO = dopo;
|
|
spi->SPI.CTRLA.bit.DORD = self->firstbit;
|
|
|
|
// Enable receive only if miso is defined
|
|
if (self->miso != 0xff) {
|
|
spi->SPI.CTRLB.reg = SERCOM_SPI_CTRLB_RXEN;
|
|
while (spi->SPI.SYNCBUSY.bit.CTRLB) {
|
|
}
|
|
}
|
|
|
|
#if defined(MCU_SAMD51)
|
|
spi->SPI.CTRLC.reg = 1; // 1 clock cycle character spacing
|
|
#endif
|
|
|
|
// SPI is driven by the clock of GCLK Generator 2, freq by get_peripheral_freq()
|
|
// baud = bus_freq / (2 * baudrate) - 1
|
|
uint32_t baud = get_peripheral_freq() / (2 * self->baudrate);
|
|
if (baud > 0) { // Avoid underflow
|
|
baud -= 1;
|
|
}
|
|
if (baud > 255) { // Avoid overflow
|
|
baud = 255;
|
|
}
|
|
spi->SPI.BAUD.reg = baud; // Set Baud
|
|
|
|
// Enable RXC interrupt only if miso is defined
|
|
if (self->miso != 0xff) {
|
|
#if defined(MCU_SAMD21)
|
|
NVIC_EnableIRQ(SERCOM0_IRQn + self->id);
|
|
#elif defined(MCU_SAMD51)
|
|
NVIC_EnableIRQ(SERCOM0_0_IRQn + 4 * self->id + 2);
|
|
#endif
|
|
sercom_register_irq(self->id, &common_spi_irq_handler);
|
|
}
|
|
|
|
sercom_enable(spi, 1);
|
|
}
|
|
}
|
|
|
|
STATIC mp_obj_t machine_spi_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *args) {
|
|
mp_arg_check_num(n_args, n_kw, 1, MP_OBJ_FUN_ARGS_MAX, true);
|
|
|
|
// Get SPI bus.
|
|
int spi_id = mp_obj_get_int(args[0]);
|
|
if (spi_id < 0 || spi_id > SERCOM_INST_NUM) {
|
|
mp_raise_msg_varg(&mp_type_ValueError, MP_ERROR_TEXT("SPI(%d) doesn't exist"), spi_id);
|
|
}
|
|
|
|
// Create the SPI object and fill it with defaults.
|
|
machine_spi_obj_t *self = mp_obj_malloc(machine_spi_obj_t, &machine_spi_type);
|
|
self->id = spi_id;
|
|
self->baudrate = DEFAULT_SPI_BAUDRATE;
|
|
self->polarity = DEFAULT_SPI_POLARITY;
|
|
self->phase = DEFAULT_SPI_PHASE;
|
|
self->firstbit = DEFAULT_SPI_FIRSTBIT;
|
|
self->mosi = 0xff; // 0xff: pin not defined (yet)
|
|
self->miso = 0xff;
|
|
self->sck = 0xff;
|
|
|
|
self->new = true;
|
|
MP_STATE_PORT(sercom_table[spi_id]) = self;
|
|
|
|
mp_map_t kw_args;
|
|
mp_map_init_fixed_table(&kw_args, n_kw, args + n_args);
|
|
machine_spi_init((mp_obj_base_t *)self, n_args - 1, args + 1, &kw_args);
|
|
return self;
|
|
}
|
|
|
|
STATIC void machine_sercom_deinit(mp_obj_base_t *self_in) {
|
|
machine_spi_obj_t *self = MP_OBJ_TO_PTR(self_in);
|
|
Sercom *spi = sercom_instance[self->id];
|
|
// Disable interrupts (if any)
|
|
spi->SPI.INTENCLR.reg = 0xff;
|
|
sercom_enable(spi, 0);
|
|
// clear table entry of spi
|
|
MP_STATE_PORT(sercom_table[self->id]) = NULL;
|
|
}
|
|
|
|
STATIC void machine_spi_transfer(mp_obj_base_t *self_in, size_t len, const uint8_t *src, uint8_t *dest) {
|
|
machine_spi_obj_t *self = (machine_spi_obj_t *)self_in;
|
|
|
|
Sercom *spi = sercom_instance[self->id];
|
|
size_t txlen = len;
|
|
// Clear the input queue, if needed
|
|
while (dest && spi->SPI.INTFLAG.bit.RXC) {
|
|
uint32_t temp;
|
|
(void)temp;
|
|
temp = spi->SPI.DATA.bit.DATA;
|
|
}
|
|
// Set up the irq data pointers and enable IRQ
|
|
if (dest) {
|
|
if (self->miso == 0xff) {
|
|
mp_raise_ValueError(MP_ERROR_TEXT("read is not enabled"));
|
|
}
|
|
spi->SPI.INTENSET.reg = SERCOM_SPI_INTENSET_RXC;
|
|
self->dest = dest;
|
|
self->rxlen = len;
|
|
}
|
|
|
|
// Send by polling & receive by IRQ
|
|
while (txlen) {
|
|
if (spi->SPI.INTFLAG.bit.DRE) {
|
|
spi->SPI.DATA.bit.DATA = *src;
|
|
src += 1;
|
|
txlen--;
|
|
}
|
|
}
|
|
// Receive the remaining data, if any and clear IRQ
|
|
// Do no wait forever.
|
|
if (dest) {
|
|
int32_t timeout = 1000;
|
|
while (self->rxlen > 0 && timeout) {
|
|
timeout--;
|
|
MICROPY_EVENT_POLL_HOOK
|
|
}
|
|
spi->SPI.INTENCLR.reg = SERCOM_SPI_INTENCLR_RXC;
|
|
} else {
|
|
// Wait for the data being shifted out.
|
|
while (!spi->SPI.INTFLAG.bit.TXC) {
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
STATIC const mp_machine_spi_p_t machine_spi_p = {
|
|
.init = machine_spi_init,
|
|
.deinit = machine_sercom_deinit,
|
|
.transfer = machine_spi_transfer,
|
|
};
|
|
|
|
MP_DEFINE_CONST_OBJ_TYPE(
|
|
machine_spi_type,
|
|
MP_QSTR_SPI,
|
|
MP_TYPE_FLAG_NONE,
|
|
make_new, machine_spi_make_new,
|
|
print, machine_spi_print,
|
|
protocol, &machine_spi_p,
|
|
locals_dict, &mp_machine_spi_locals_dict
|
|
);
|
|
|
|
#endif
|