djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1d0781bf12
circuitpython/locale/pl.po
Jeff Epler 2c78a7400a make translate
2020-04-26 14:46:28 -05:00

3419 lines
92 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Adafruit CircuitPython Polish Translation
# Copyright (C) 2019
# This file is distributed under the same license as the CircuitPython package.
# Radomir Dopieralski <circuitpython@sheep.art.pl>, 2019.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2020-04-26 14:46-0500\n"
"PO-Revision-Date: 2019-03-19 18:37-0700\n"
"Last-Translator: Radomir Dopieralski <circuitpython@sheep.art.pl>\n"
"Language-Team: pl\n"
"Language: pl\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: main.c
msgid ""
"\n"
"Code done running. Waiting for reload.\n"
msgstr ""
"\n"
"Kod wykonany. Czekam na przeładowanie.\n"
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with the contents of your CIRCUITPY drive at \n"
"https://github.com/adafruit/circuitpython/issues\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"To exit, please reset the board without "
msgstr ""
#: py/obj.c
msgid " File \"%q\""
msgstr " Plik \"%q\""
#: py/obj.c
msgid " File \"%q\", line %d"
msgstr " Plik \"%q\", linia %d"
#: main.c
msgid " output:\n"
msgstr " wyjście:\n"
#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c wymaga int lub char"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "%d address pins and %d rgb pins indicate a height of %d, not %d"
msgstr ""
#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q w użyciu"
#: py/obj.c
msgid "%q index out of range"
msgstr "%q poza zakresem"
#: py/obj.c
msgid "%q indices must be integers, not %s"
msgstr "%q indeks musi być liczbą całkowitą, a nie %s"
#: shared-bindings/_bleio/CharacteristicBuffer.c
#: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/Shape.c
msgid "%q must be >= 1"
msgstr "%q musi być >= 1"
#: shared-bindings/fontio/BuiltinFont.c
msgid "%q should be an int"
msgstr "%q powinno być typu int"
#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() bierze %d argumentów pozycyjnych, lecz podano %d"
#: py/argcheck.c
msgid "'%q' argument required"
msgstr "'%q' wymaga argumentu"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' oczekuje etykiety"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' oczekuje rejestru"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' oczekuje rejestru specjalnego"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' oczekuje rejestru FPU"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' oczekuje adresu w postaci [a, b]"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' oczekuje liczby całkowitej"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' oczekuje co najwyżej r%d"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' oczekuje {r0, r1, ...}"
#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d is not within range %d..%d"
msgstr "'%s' liczba %d poza zakresem %d..%d"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x does not fit in mask 0x%x"
msgstr "'%s' liczba 0x%x nie pasuje do maski 0x%x"
#: py/runtime.c
msgid "'%s' object cannot assign attribute '%q'"
msgstr ""
#: py/proto.c
msgid "'%s' object does not support '%q'"
msgstr ""
#: py/obj.c
#, c-format
msgid "'%s' object does not support item assignment"
msgstr "'%s' obiekt nie wspiera przypisania do elementów"
#: py/obj.c
#, c-format
msgid "'%s' object does not support item deletion"
msgstr "'%s' obiekt nie wspiera usuwania elementów"
#: py/runtime.c
msgid "'%s' object has no attribute '%q'"
msgstr "'%s' obiekt nie ma atrybutu '%q'"
#: py/runtime.c
#, c-format
msgid "'%s' object is not an iterator"
msgstr "'%s' obiekt nie jest iteratorem"
#: py/objtype.c py/runtime.c
#, c-format
msgid "'%s' object is not callable"
msgstr "'%s' nie można wywoływać obiektu"
#: py/runtime.c
#, c-format
msgid "'%s' object is not iterable"
msgstr "'%s' nie można iterować po obiekcie"
#: py/obj.c
#, c-format
msgid "'%s' object is not subscriptable"
msgstr "'%s' nie można indeksować obiektu"
#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr "wyrównanie '=' niedozwolone w specyfikacji formatu"
#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "typy formatowania 'S' oraz 'O' są niewspierane"
#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' wymaga 1 argumentu"
#: py/compile.c
msgid "'async for' or 'async with' outside async function"
msgstr ""
#: py/compile.c
msgid "'await' outside function"
msgstr "'await' poza funkcją"
#: py/compile.c
msgid "'break' outside loop"
msgstr "'break' poza pętlą"
#: py/compile.c
msgid "'continue' outside loop"
msgstr "'continue' poza pętlą"
#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' wymaga 2 lub więcej argumentów"
#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' wymaga całkowitych argumentów"
#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' wymaga 1 argumentu"
#: py/compile.c
msgid "'return' outside function"
msgstr "'return' poza funkcją"
#: py/compile.c
msgid "'yield' outside function"
msgstr "'yield' poza funkcją"
#: py/compile.c
msgid "*x must be assignment target"
msgstr "*x musi być obiektem przypisania"
#: py/obj.c
msgid ", in %q\n"
msgstr ", w %q\n"
#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr "0.0 do potęgi zespolonej"
#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "3-argumentowy pow() jest niewspierany"
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "Kanał przerwań sprzętowych w użyciu"
#: shared-bindings/_bleio/Address.c
#, c-format
msgid "Address must be %d bytes long"
msgstr "Adres musi mieć %d bajtów"
#: shared-bindings/_bleio/Address.c
msgid "Address type out of range"
msgstr ""
#: ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Wszystkie peryferia I2C w użyciu"
#: ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Wszystkie peryferia SPI w użyciu"
#: ports/nrf/common-hal/busio/UART.c
msgid "All UART peripherals are in use"
msgstr "Wszystkie peryferia UART w użyciu"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Wszystkie kanały zdarzeń w użyciu"
#: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "All sync event channels in use"
msgstr "Wszystkie kanały zdarzeń synchronizacji w użyciu"
#: shared-bindings/pulseio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Wszystkie timery tej nóżki w użyciu"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#: ports/nrf/peripherals/nrf/timers.c shared-bindings/pulseio/PWMOut.c
#: shared-module/_pew/PewPew.c
msgid "All timers in use"
msgstr "Wszystkie timery w użyciu"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr ""
#: ports/cxd56/common-hal/analogio/AnalogIn.c
msgid "AnalogIn not supported on given pin"
msgstr ""
#: ports/cxd56/common-hal/analogio/AnalogOut.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c
#: ports/nrf/common-hal/analogio/AnalogOut.c
msgid "AnalogOut functionality not supported"
msgstr "AnalogOut jest niewspierane"
#: shared-bindings/analogio/AnalogOut.c
msgid "AnalogOut is only 16 bits. Value must be less than 65536."
msgstr "AnalogOut ma 16 bitów. Wartość musi być mniejsza od 65536."
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
msgid "AnalogOut not supported on given pin"
msgstr "AnalogOut niewspierany na tej nóżce"
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Wysyłanie jest już w toku"
#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr "Tablica musi zawierać pół-słowa (typ 'H')"
#: shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Wartości powinny być bajtami."
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "At most %d %q may be specified (not %d)"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when MicroPython VM not running."
msgstr ""
#: main.c
msgid "Auto-reload is off.\n"
msgstr "Samo-przeładowywanie wyłączone.\n"
#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Samo-przeładowywanie włączone. Po prostu zapisz pliki przez USB aby je "
"uruchomić, albo wejdź w konsolę aby wyłączyć.\n"
#: shared-module/displayio/Display.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr "Zegar bitowy i wybór słowa muszą współdzielić jednostkę zegara"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Głębia musi być wielokrotnością 8."
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Obie nóżki muszą wspierać przerwania sprzętowe"
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "Brightness must be 0-1.0"
msgstr ""
#: shared-bindings/supervisor/__init__.c
msgid "Brightness must be between 0 and 255"
msgstr "Jasność musi być pomiędzy 0 a 255"
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Brightness not adjustable"
msgstr "Jasność nie jest regulowana"
#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr ""
#: shared-module/usb_hid/Device.c
#, c-format
msgid "Buffer incorrect size. Should be %d bytes."
msgstr "Zła wielkość bufora. Powinno być %d bajtów."
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is not a bytearray."
msgstr ""
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is too small"
msgstr ""
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Bufor musi mieć długość 1 lub więcej"
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Buffer too large and unable to allocate"
msgstr ""
#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr ""
#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
#, c-format
msgid "Bus pin %d is already in use"
msgstr "Nóżka magistrali %d jest w użyciu"
#: shared-bindings/_bleio/UUID.c
msgid "Byte buffer must be 16 bytes."
msgstr "Bufor musi mieć 16 bajtów."
#: shared-bindings/nvm/ByteArray.c
msgid "Bytes must be between 0 and 255."
msgstr "Bytes musi być między 0 a 255."
#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "Can't set CCCD on local Characteristic"
msgstr ""
#: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "Nie można usunąć"
#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "Nie ma podciągnięcia w trybie wyjścia"
#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr "Nie można odczytać temperatury"
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Cannot output both channels on the same pin"
msgstr "Nie można mieć obu kanałów na tej samej nóżce"
#: shared-module/bitbangio/SPI.c
msgid "Cannot read without MISO pin."
msgstr "Nie można czytać bez nóżki MISO"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "Nie można nagrać do pliku"
#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when USB is active."
msgstr "Nie można przemontować '/' gdy USB działa."
#: ports/atmel-samd/common-hal/microcontroller/__init__.c
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present."
msgstr "Nie można zrestartować -- nie ma bootloadera."
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "Nie można ustawić wartości w trybie wejścia"
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr ""
#: py/objslice.c
msgid "Cannot subclass slice"
msgstr "Nie można dziedziczyć ze slice"
#: shared-module/bitbangio/SPI.c
msgid "Cannot transfer without MOSI and MISO pins."
msgstr "Nie można przesyłać bez nóżek MOSI i MISO."
#: extmod/moductypes.c
msgid "Cannot unambiguously get sizeof scalar"
msgstr "Wielkość skalara jest niejednoznaczna"
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
#: shared-module/bitbangio/SPI.c
msgid "Cannot write without MOSI pin."
msgstr "Nie można pisać bez nóżki MOSI."
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr "Pisanie do CharacteristicBuffer niewspierane"
#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"CircuitPython is in safe mode because you pressed the reset button during "
"boot. Press again to exit safe mode.\n"
msgstr ""
#: shared-module/bitbangio/SPI.c
msgid "Clock pin init failed."
msgstr "Nie powiodło się ustawienie nóżki zegara"
#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr "Rozciągnięcie zegara zbyt duże"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Jednostka zegara w użyciu"
#: shared-bindings/_pew/PewPew.c
msgid "Column entry must be digitalio.DigitalInOut"
msgstr "Kolumny muszą być typu digitalio.DigitalInOut"
#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/displayio/ParallelBus.c
msgid "Command must be an int between 0 and 255"
msgstr "Komenda musi być int pomiędzy 0 a 255"
#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
#: py/persistentcode.c
msgid "Corrupt .mpy file"
msgstr ""
#: py/emitglue.c
msgid "Corrupt raw code"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
msgid "Could not initialize UART"
msgstr "Ustawienie UART nie powiodło się"
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not initialize channel"
msgstr ""
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not initialize timer"
msgstr ""
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not re-init channel"
msgstr ""
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not re-init timer"
msgstr ""
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not restart PWM"
msgstr ""
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Could not start PWM"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr ""
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr ""
#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate first buffer"
msgstr "Nie udała się alokacja pierwszego bufora"
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate input buffer"
msgstr ""
#: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate second buffer"
msgstr "Nie udała się alokacja drugiego bufora"
#: supervisor/shared/safe_mode.c
msgid "Crash into the HardFault_Handler."
msgstr ""
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr ""
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC w użyciu"
#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
msgid "Data 0 pin must be byte aligned"
msgstr "Nóżka data 0 musi być wyrównana do bajtu"
#: shared-module/audiocore/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr "Fragment danych musi następować po fragmencie fmt"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data too large for advertisement packet"
msgstr "Zbyt dużo danych pakietu rozgłoszeniowego"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr "Pojemność celu mniejsza od destination_length."
#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr ""
#: ports/cxd56/common-hal/digitalio/DigitalInOut.c
msgid "DigitalInOut not supported on given pin"
msgstr ""
#: shared-bindings/displayio/Display.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display must have a 16 bit colorspace."
msgstr ""
#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display rotation must be in 90 degree increments"
msgstr "Wyświetlacz można obracać co 90 stopni"
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr "Tryb sterowania nieużywany w trybie wejścia."
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr "Kanał EXTINT w użyciu"
#: extmod/modure.c
msgid "Error in regex"
msgstr "Błąd w regex"
#: shared-bindings/microcontroller/Pin.c
#: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c
#: shared-bindings/terminalio/Terminal.c
msgid "Expected a %q"
msgstr "Oczekiwano %q"
#: shared-bindings/_bleio/CharacteristicBuffer.c
#: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c
msgid "Expected a Characteristic"
msgstr "Oczekiwano charakterystyki"
#: shared-bindings/_bleio/Characteristic.c
msgid "Expected a Service"
msgstr ""
#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
#: shared-bindings/_bleio/Service.c
msgid "Expected a UUID"
msgstr "Oczekiwano UUID"
#: shared-bindings/_bleio/Adapter.c
msgid "Expected an Address"
msgstr ""
#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
msgstr "Oczekiwano krotkę długości %d, otrzymano %d"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
msgstr ""
#: extmod/ulab/code/fft.c
msgid "FFT is defined for ndarrays only"
msgstr ""
#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr ""
#: ports/nrf/sd_mutex.c
#, fuzzy, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr "Nie udało się uzyskać blokady, błąd 0x$04x"
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "Failed to allocate RX buffer"
msgstr "Nie udała się alokacja bufora RX"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr "Nie udała się alokacja %d bajtów na bufor RX"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: internal error"
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: timeout"
msgstr ""
#: shared-module/audiomp3/MP3Decoder.c
msgid "Failed to parse MP3 file"
msgstr ""
#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr "Nie udało się zwolnić blokady, błąd 0x%04x"
#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr ""
#: py/moduerrno.c
msgid "File exists"
msgstr "Plik istnieje"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "Frequency captured is above capability. Capture Paused."
msgstr "Uzyskana częstotliwość jest niemożliwa. Spauzowano."
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr "Funkcja wymaga blokady"
#: shared-bindings/displayio/Display.c
#: shared-bindings/displayio/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr ""
#: shared-module/displayio/Group.c
msgid "Group full"
msgstr "Grupa pełna"
#: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c
msgid "Hardware busy, try alternative pins"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "Hardware in use, try alternative pins"
msgstr ""
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "Operacja I/O na zamkniętym pliku"
#: ports/stm/common-hal/busio/I2C.c
msgid "I2C Init Error"
msgstr ""
#: extmod/machine_i2c.c
msgid "I2C operation not supported"
msgstr "Operacja I2C nieobsługiwana"
#: py/persistentcode.c
msgid ""
"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
"mpy-update for more info."
msgstr ""
"Niekompatybilny plik .mpy. Proszę odświeżyć wszystkie pliki .mpy. Więcej "
"informacji na http://adafrui.it/mpy-update."
#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr "Niewłaściwa wielkość bufora"
#: py/moduerrno.c
msgid "Input/output error"
msgstr "Błąd I/O"
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid %q pin"
msgstr "Zła nóżka %q"
#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
msgid "Invalid BMP file"
msgstr "Zły BMP"
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "Invalid DAC pin supplied"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c
msgid "Invalid I2C pin selection"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PWMOut.c
#: ports/cxd56/common-hal/pulseio/PWMOut.c
#: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c
msgid "Invalid PWM frequency"
msgstr "Zła częstotliwość PWM"
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c
msgid "Invalid SPI pin selection"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Invalid UART pin selection"
msgstr ""
#: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid argument"
msgstr "Zły argument"
#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr "Zła liczba bitów wartości"
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr "Zła wielkość bufora"
#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "Invalid byteorder string"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr "Zły okres. Poprawny zakres to: 1 - 500"
#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid channel count"
msgstr "Zła liczba kanałów"
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Invalid direction."
msgstr "Zły tryb"
#: shared-module/audiocore/WaveFile.c
msgid "Invalid file"
msgstr "Zły plik"
#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr "Zła wielkość fragmentu formatu"
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Invalid frequency supplied"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Invalid memory access."
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid number of bits"
msgstr "Zła liczba bitów"
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
#: shared-bindings/displayio/FourWire.c
msgid "Invalid phase"
msgstr "Zła faza"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: shared-bindings/pulseio/PWMOut.c shared-module/rgbmatrix/RGBMatrix.c
msgid "Invalid pin"
msgstr "Zła nóżka"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Invalid pin for left channel"
msgstr "Zła nóżka dla lewego kanału"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Invalid pin for right channel"
msgstr "Zła nóżka dla prawego kanału"
#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/atmel-samd/common-hal/busio/SPI.c
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
#: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c
#: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c
msgid "Invalid pins"
msgstr "Złe nóżki"
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "Invalid pins for PWMOut"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
#: shared-bindings/displayio/FourWire.c
msgid "Invalid polarity"
msgstr "Zła polaryzacja"
#: shared-bindings/_bleio/Characteristic.c
msgid "Invalid properties"
msgstr ""
#: shared-bindings/microcontroller/__init__.c
msgid "Invalid run mode."
msgstr "Zły tryb uruchomienia"
#: shared-module/_bleio/Attribute.c
msgid "Invalid security_mode"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid voice"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "Invalid voice count"
msgstr "Zła liczba głosów"
#: shared-module/audiocore/WaveFile.c
msgid "Invalid wave file"
msgstr "Zły plik wave"
#: ports/stm/common-hal/busio/UART.c
msgid "Invalid word/bit length"
msgstr ""
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "Lewa strona argumentu nazwanego musi być nazwą"
#: shared-module/displayio/Group.c
msgid "Layer already in a group."
msgstr ""
#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass."
msgstr "Layer musi dziedziczyć z Group albo TileGrid"
#: py/objslice.c
msgid "Length must be an int"
msgstr "Długość musi być całkowita"
#: py/objslice.c
msgid "Length must be non-negative"
msgstr "Długość musi być nieujemna"
#: shared-module/bitbangio/SPI.c
msgid "MISO pin init failed."
msgstr "Nie powiodło się ustawienie nóżki MISO."
#: shared-module/bitbangio/SPI.c
msgid "MOSI pin init failed."
msgstr "Nie powiodło się ustawienie nóżki MOSI"
#: shared-module/displayio/Shape.c
#, c-format
msgid "Maximum x value when mirrored is %d"
msgstr "Największa wartość x przy odwróceniu to %d"
#: supervisor/shared/safe_mode.c
msgid "MicroPython NLR jump failed. Likely memory corruption."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "MicroPython fatal error."
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr "Opóźnienie włączenia mikrofonu musi być w zakresie od 0.0 do 1.0"
#: ports/stm/common-hal/busio/SPI.c
msgid "Missing MISO or MOSI Pin"
msgstr ""
#: shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: py/parse.c
msgid "Name too long"
msgstr ""
#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "Negative step not supported"
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "No CCCD for this Characteristic"
msgstr ""
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "Brak DAC"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "No DMA channel found"
msgstr "Nie znaleziono kanału DMA"
#: ports/stm/common-hal/busio/SPI.c
msgid "No MISO Pin"
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "No MOSI Pin"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Brak nóżki RX"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/stm/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Brak nóżki TX"
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr "Brak wolnych zegarów"
#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr "Nie ma domyślnej magistrali %q"
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr "Brak wolnych GLCK"
#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr "Brak generatora liczb losowych"
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
msgid "No hardware support on clk pin"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "No hardware support on pin"
msgstr "Brak sprzętowej obsługi na nóżce"
#: ports/stm/common-hal/pulseio/PWMOut.c
msgid "No more timers available on this pin."
msgstr ""
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr ""
#: py/moduerrno.c
msgid "No space left on device"
msgstr "Brak miejsca"
#: py/moduerrno.c
msgid "No such file/directory"
msgstr "Brak pliku/katalogu"
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Nordic Soft Device failure assertion."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "Not connected"
msgstr "Nie podłączono"
#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
#: shared-bindings/audiopwmio/PWMAudioOut.c
msgid "Not playing"
msgstr "Nic nie jest odtwarzane"
#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr "Obiekt został zwolniony i nie można go już używać. Utwórz nowy obiekt."
#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr "Nieparzysta parzystość nie jest wspierana"
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Only 8 or 16 bit mono with "
msgstr "Tylko 8 lub 16 bitów mono z "
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr "Wspierane są tylko nieskompresowane pliki BMP: wielkość nagłówka %d"
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr "Nadpróbkowanie musi być wielokrotnością 8."
#: shared-bindings/pulseio/PWMOut.c
msgid ""
"PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
msgstr "duty_cycle musi być pomiędzy 0 a 65535 włącznie (rozdzielczość 16 bit)"
#: shared-bindings/pulseio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr "Nie można zmienić częstotliwości PWM gdy variable_frequency=False."
#: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c
#: ports/stm/common-hal/displayio/ParallelBus.c
msgid "ParallelBus not yet supported"
msgstr ""
#: py/moduerrno.c
msgid "Permission denied"
msgstr "Odmowa dostępu"
#: ports/atmel-samd/common-hal/analogio/AnalogIn.c
#: ports/cxd56/common-hal/analogio/AnalogIn.c
#: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr "Nóżka nie obsługuje ADC"
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin number already reserved by EXTI"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes. If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr "Oraz moduły w systemie plików\n"
#: shared-bindings/ps2io/Ps2.c
msgid "Pop from an empty Ps2 buffer"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr ""
#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload."
msgstr "Dowolny klawisz aby uruchomić konsolę. CTRL-D aby przeładować."
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr "Podciągnięcie nieużywane w trybie wyjścia."
#: ports/stm/common-hal/pulseio/PulseOut.c
msgid "PulseOut not supported on this chip"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
#: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c
#: ports/nrf/common-hal/rtc/RTC.c
msgid "RTC calibration is not supported on this board"
msgstr "Brak obsługi kalibracji RTC"
#: shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "Brak obsługi RTC"
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RTS/CTS/RS485 Not yet supported on this device"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr "Tylko do odczytu"
#: extmod/vfs_fat.c py/moduerrno.c
msgid "Read-only filesystem"
msgstr "System plików tylko do odczytu"
#: shared-module/displayio/Bitmap.c
msgid "Read-only object"
msgstr "Obiekt tylko do odczytu"
#: shared-bindings/displayio/EPaperDisplay.c
msgid "Refresh too soon"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr "Prawy kanał jest niewspierany"
#: shared-bindings/_pew/PewPew.c
msgid "Row entry must be digitalio.DigitalInOut"
msgstr "Rzędy muszą być digitalio.DigitalInOut"
#: main.c
msgid "Running in safe mode! Auto-reload is off.\n"
msgstr "Uruchomiony tryb bezpieczeństwa! Samo-przeładowanie wyłączone.\n"
#: main.c
msgid "Running in safe mode! Not running saved code.\n"
msgstr "Uruchomiony tryb bezpieczeństwa! Zapisany kod nie jest uruchamiany.\n"
#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "SDA or SCL needs a pull up"
msgstr "SDA lub SCL wymagają podciągnięcia"
#: ports/stm/common-hal/busio/SPI.c
msgid "SPI Init Error"
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "SPI Re-initialization error"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "Sample rate must be positive"
msgstr "Częstotliwość próbkowania musi być dodatnia"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#, c-format
msgid "Sample rate too high. It must be less than %d"
msgstr "Zbyt wysoka częstotliwość próbkowania. Musi być mniejsza niż %d"
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progess. Stop with stop_scan."
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected CTS pin not valid"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Selected RTS pin not valid"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr "Serializator w użyciu"
#: shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr "Fragment i wartość są różnych długości."
#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/TileGrid.c shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr "Fragmenty nieobsługiwane"
#: extmod/modure.c
msgid "Splitting with sub-captures"
msgstr "Podział z podgrupami"
#: shared-bindings/supervisor/__init__.c
msgid "Stack size must be at least 256"
msgstr "Stos musi mieć co najmniej 256 bajtów"
#: shared-bindings/multiterminal/__init__.c
msgid "Stream missing readinto() or write() method."
msgstr "Strumień nie ma metod readinto() lub write()."
#: ports/stm/common-hal/busio/UART.c
msgid "Supply at least one UART pin"
msgstr ""
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Please increase the stack size if you know how, or if not:"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The `microcontroller` module was used to boot into safe mode. Press reset to "
"exit safe mode.\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"The microcontroller's power dipped. Make sure your power supply provides\n"
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY).\n"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr "Wartość bits_per_sample nie pasuje do miksera"
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's channel count does not match the mixer's"
msgstr "Liczba kanałów nie pasuje do miksera "
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's sample rate does not match the mixer's"
msgstr "Sample rate nie pasuje do miksera"
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's signedness does not match the mixer's"
msgstr "Znak nie pasuje do miksera"
#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr "Wysokość bitmapy musi być wielokrotnością wysokości kafelka"
#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
msgid "Tile index out of bounds"
msgstr ""
#: shared-bindings/displayio/TileGrid.c
msgid "Tile value out of bounds"
msgstr ""
#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr "Szerokość bitmapy musi być wielokrotnością szerokości kafelka"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr "Zbyt wiele kanałów."
#: shared-module/displayio/__init__.c
msgid "Too many display busses"
msgstr "Zbyt wiele magistrali"
#: shared-module/displayio/__init__.c
msgid "Too many displays"
msgstr "Zbyt wiele wyświetlaczy"
#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr "Ślad wyjątku (najnowsze wywołanie na końcu):\n"
#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr "Wymagana krotka lub struct_time"
#: ports/stm/common-hal/busio/UART.c
msgid "UART Buffer allocation error"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART De-init error"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART Init Error"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART Re-init error"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART write error"
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB Busy"
msgstr "USB Zajęte"
#: shared-module/usb_hid/Device.c
msgid "USB Error"
msgstr "Błąd USB"
#: shared-bindings/_bleio/UUID.c
msgid "UUID integer value must be 0-0xffff"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr "UUID inny, niż `xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
#: shared-bindings/_bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr "UUID nie jest typu str, int lub bytes"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr "Nie udała się alokacja buforów do konwersji ze znakiem"
#: shared-module/displayio/I2CDisplay.c
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr "Brak wolnego GCLK"
#: py/parse.c
msgid "Unable to init parser"
msgstr "Błąd ustawienia parsera"
#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr "Nie można odczytać danych palety"
#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr "Błąd zapisu do NVM."
#: ports/nrf/common-hal/_bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr "Nieoczekiwany typ nrfx uuid."
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown soft device error: %04x"
msgstr ""
#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr "Zła liczba obiektów po prawej stronie (oczekiwano %d, jest %d)."
#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""
#: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c
msgid "Unsupported baudrate"
msgstr "Zła szybkość transmisji"
#: shared-module/displayio/display_core.c
msgid "Unsupported display bus type"
msgstr "Zły typ magistrali wyświetlaczy"
#: shared-module/audiocore/WaveFile.c
msgid "Unsupported format"
msgstr "Zły format"
#: py/moduerrno.c
msgid "Unsupported operation"
msgstr "Zła operacja"
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Unsupported pull value."
msgstr "Zła wartość podciągnięcia."
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length != required fixed length"
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length > max_length"
msgstr ""
#: py/emitnative.c
msgid "Viper functions don't currently support more than 4 arguments"
msgstr "Funkcje Viper nie obsługują obecnie więcej niż 4 argumentów"
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr "UWAGA: Nazwa pliku ma dwa rozszerzenia\n"
#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Please visit learn.adafruit.com/category/circuitpython for project guides.\n"
"\n"
"To list built-in modules please do `help(\"modules\")`.\n"
msgstr ""
"Witamy w CircuitPythonie Adafruita %s!\n"
"Podręczniki dostępne na learn.adafruit.com/category/circuitpyhon.\n"
"Aby zobaczyć wbudowane moduły, wpisz `help(\"modules\")`.\n"
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You are in safe mode: something unanticipated happened.\n"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You requested starting safe mode by "
msgstr "Zażądano trybu bezpieczeństwa przez "
#: py/objtype.c
msgid "__init__() should return None"
msgstr "__init__() powinien zwracać None"
#: py/objtype.c
#, c-format
msgid "__init__() should return None, not '%s'"
msgstr "__init__() powinien zwracać None, nie '%s'"
#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr "Argument __new__ musi być typu użytkownika"
#: extmod/modubinascii.c extmod/moduhashlib.c
msgid "a bytes-like object is required"
msgstr "wymagany obiekt typu bytes"
#: lib/embed/abort_.c
msgid "abort() called"
msgstr "Wywołano abort()"
#: extmod/machine_mem.c
#, c-format
msgid "address %08x is not aligned to %d bytes"
msgstr "adres %08x nie jest wyrównany do %d bajtów"
#: shared-bindings/i2cslave/I2CSlave.c
msgid "address out of bounds"
msgstr "adres poza zakresem"
#: shared-bindings/i2cslave/I2CSlave.c
msgid "addresses is empty"
msgstr "adres jest pusty"
#: extmod/ulab/code/vectorise.c
msgid "arctan2 is implemented for scalars and ndarrays only"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "arg jest puste"
#: extmod/ulab/code/numerical.c
msgid "argsort argument must be an ndarray"
msgstr ""
#: py/runtime.c
msgid "argument has wrong type"
msgstr "argument ma zły typ"
#: py/argcheck.c shared-bindings/_stage/__init__.c
#: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c
msgid "argument num/types mismatch"
msgstr "zła liczba lub typ argumentów"
#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr "argument powinien być '%q' a nie '%q'"
#: extmod/ulab/code/linalg.c
msgid "arguments must be ndarrays"
msgstr ""
#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "tablica/bytes wymagane po prawej stronie"
#: extmod/ulab/code/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
#: py/objstr.c
msgid "attributes not supported yet"
msgstr "atrybuty nie są jeszcze obsługiwane"
#: extmod/ulab/code/numerical.c
msgid "axis must be -1, 0, None, or 1"
msgstr ""
#: extmod/ulab/code/numerical.c
msgid "axis must be -1, 0, or 1"
msgstr ""
#: extmod/ulab/code/numerical.c
msgid "axis must be None, 0, or 1"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
msgstr "zły tryb kompilacji"
#: py/objstr.c
msgid "bad conversion specifier"
msgstr "zły specyfikator konwersji"
#: py/objstr.c
msgid "bad format string"
msgstr "zła specyfikacja formatu"
#: py/binary.c
msgid "bad typecode"
msgstr "zły typecode"
#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr "brak dwu-argumentowego operatora %q"
#: shared-bindings/busio/UART.c
msgid "bits must be 7, 8 or 9"
msgstr "bits musi być 7, 8 lub 9"
#: extmod/machine_spi.c
msgid "bits must be 8"
msgstr "bits musi być 8"
#: shared-bindings/audiomixer/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr "bits_per_sample musi być 8 lub 16"
#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr "skok poza zakres"
#: shared-bindings/audiocore/RawSample.c
msgid "buffer must be a bytes-like object"
msgstr "bufor mysi być typu bytes"
#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr "wielkość bufora musi pasować do formatu"
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr "fragmenty bufora muszą mieć tę samą długość"
#: py/modstruct.c shared-bindings/struct/__init__.c
#: shared-module/struct/__init__.c
msgid "buffer too small"
msgstr "zbyt mały bufor"
#: extmod/machine_spi.c
msgid "buffers must be the same length"
msgstr "bufory muszą mieć tę samą długość"
#: shared-bindings/_pew/PewPew.c
msgid "buttons must be digitalio.DigitalInOut"
msgstr "buttons musi być digitalio.DigitalInOut"
#: py/vm.c
msgid "byte code not implemented"
msgstr "bajtkod niezaimplemntowany"
#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "byteorder is not a string"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
msgid "bytes > 8 bits not supported"
msgstr "bajty większe od 8 bitów są niewspierane"
#: py/objstr.c
msgid "bytes value out of range"
msgstr "wartość bytes poza zakresem"
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is out of range"
msgstr "kalibracja poza zakresem"
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr "kalibracja tylko do odczytu"
#: ports/atmel-samd/common-hal/rtc/RTC.c
msgid "calibration value out of range +/-127"
msgstr "wartość kalibracji poza zakresem +/-127"
#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr "asembler Thumb może przyjąć do 4 parameterów"
#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "asembler Xtensa może przyjąć do 4 parameterów"
#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "można zapisać tylko bytecode"
#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr "nie można dodać specjalnej metody do podklasy"
#: py/compile.c
msgid "can't assign to expression"
msgstr "przypisanie do wyrażenia"
#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr "nie można skonwertować %s do complex"
#: py/obj.c
#, c-format
msgid "can't convert %s to float"
msgstr "nie można skonwertować %s do float"
#: py/obj.c
#, c-format
msgid "can't convert %s to int"
msgstr "nie można skonwertować %s do int"
#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr "nie można automatycznie skonwertować '%q' do '%q'"
#: py/objint.c
msgid "can't convert NaN to int"
msgstr "nie można skonwertować NaN do int"
#: shared-bindings/i2cslave/I2CSlave.c
msgid "can't convert address to int"
msgstr "nie można skonwertować adresu do int"
#: py/objint.c
msgid "can't convert inf to int"
msgstr "nie można skonwertować inf do int"
#: py/obj.c
msgid "can't convert to complex"
msgstr "nie można skonwertować do complex"
#: py/obj.c
msgid "can't convert to float"
msgstr "nie można skonwertować do float"
#: py/obj.c
msgid "can't convert to int"
msgstr "nie można skonwertować do int"
#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr "nie można automatycznie skonwertować do str"
#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr "deklaracja nonlocal na poziomie modułu"
#: py/compile.c
msgid "can't delete expression"
msgstr "nie można usunąć wyrażenia"
#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr "nie można użyć operatora pomiędzy '%q' a '%q'"
#: py/objcomplex.c
msgid "can't do truncated division of a complex number"
msgstr "nie można wykonać dzielenia całkowitego na liczbie zespolonej"
#: py/compile.c
msgid "can't have multiple **x"
msgstr "nie można mieć wielu **x"
#: py/compile.c
msgid "can't have multiple *x"
msgstr "nie można mieć wielu *x"
#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr "nie można automatyczne skonwertować '%q' do 'bool'"
#: py/emitnative.c
msgid "can't load from '%q'"
msgstr "nie można ładować z '%q'"
#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr "nie można ładować z indeksem '%q'"
#: py/objgenerator.c
msgid "can't pend throw to just-started generator"
msgstr "nie można skoczyć do świeżo stworzonego generatora"
#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr "świeżo stworzony generator może tylko przyjąć None"
#: py/objnamedtuple.c
msgid "can't set attribute"
msgstr "nie można ustawić atrybutu"
#: py/emitnative.c
msgid "can't store '%q'"
msgstr "nie można zapisać '%q'"
#: py/emitnative.c
msgid "can't store to '%q'"
msgstr "nie można zpisać do '%q'"
#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr "nie można zapisać z indeksem '%q'"
#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr "nie można zmienić z automatycznego numerowania pól do ręcznego"
#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr "nie można zmienić z ręcznego numerowaniu pól do automatycznego"
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "nie można tworzyć instancji '%q'"
#: py/objtype.c
msgid "cannot create instance"
msgstr "nie można stworzyć instancji"
#: py/runtime.c
msgid "cannot import name %q"
msgstr "nie można zaimportować nazwy %q"
#: py/builtinimport.c
msgid "cannot perform relative import"
msgstr "nie można wykonać relatywnego importu"
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array (incompatible input/output shape)"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr "rzutowanie"
#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr "bufor chars zbyt mały"
#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr "argument chr() poza zakresem range(0x110000)"
#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr "argument chr() poza zakresem range(256)"
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr "bufor kolorów musi nieć 3 bajty (RGB) lub 4 bajty (RGB + wypełnienie)"
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer, tuple, list, or int"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr "bufor kolorów musi być bytearray lub tablicą typu 'b' lub 'B'"
#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr "kolor musi być pomiędzy 0x000000 a 0xffffff"
#: shared-bindings/displayio/ColorConverter.c
msgid "color should be an int"
msgstr "kolor powinien być liczbą całkowitą"
#: py/objcomplex.c
msgid "complex division by zero"
msgstr "zespolone dzielenie przez zero"
#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr "wartości zespolone nieobsługiwane"
#: extmod/moduzlib.c
msgid "compression header"
msgstr "nagłówek kompresji"
#: py/parse.c
msgid "constant must be an integer"
msgstr "stała musi być liczbą całkowitą"
#: py/emitnative.c
msgid "conversion to object"
msgstr "konwersja do obiektu"
#: extmod/ulab/code/filter.c
msgid "convolve arguments must be linear arrays"
msgstr ""
#: extmod/ulab/code/filter.c
msgid "convolve arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/filter.c
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "could not broadast input array from shape"
msgstr ""
#: extmod/ulab/code/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
#: extmod/ulab/code/numerical.c
msgid "ddof must be smaller than length of data set"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "liczby dziesiętne nieobsługiwane"
#: py/compile.c
msgid "default 'except' must be last"
msgstr "domyślny 'except' musi być ostatni"
#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""
"bufor docelowy musi być bytearray lub tablicą typu 'B' dla bit_depth = 8"
#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr "bufor docelowy musi być tablicą typu 'H' dla bit_depth = 16"
#: shared-bindings/audiobusio/PDMIn.c
msgid "destination_length must be an int >= 0"
msgstr "destination_length musi być nieujemną liczbą całkowitą"
#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr "sekwencja ma złą długość"
#: extmod/ulab/code/numerical.c
msgid "diff argument must be an ndarray"
msgstr ""
#: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
msgstr "dzielenie przez zero"
#: py/objdeque.c
msgid "empty"
msgstr "puste"
#: extmod/moduheapq.c extmod/modutimeq.c
msgid "empty heap"
msgstr "pusta sterta"
#: py/objstr.c
msgid "empty separator"
msgstr "pusty separator"
#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr "pusta sekwencja"
#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr "koniec formatu przy szukaniu specyfikacji konwersji"
#: shared-bindings/displayio/Shape.c
msgid "end_x should be an int"
msgstr "end_x powinien być całkowity"
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr "błąd = 0x%08lX"
#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr "wyjątki muszą dziedziczyć po BaseException"
#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr "oczekiwano ':' po specyfikacji formatu"
#: py/obj.c
msgid "expected tuple/list"
msgstr "oczekiwano krotki/listy"
#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr "oczekiwano dict dla argumentów nazwanych"
#: py/compile.c
msgid "expecting an assembler instruction"
msgstr "oczekiwano instrukcji asemblera"
#: py/compile.c
msgid "expecting just a value for set"
msgstr "oczekiwano tylko wartości dla zbioru"
#: py/compile.c
msgid "expecting key:value for dict"
msgstr "oczekiwano klucz:wartość dla słownika"
#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr "nadmiarowe argumenty nazwane"
#: py/argcheck.c
msgid "extra positional arguments given"
msgstr "nadmiarowe argumenty pozycyjne"
#: py/parse.c
msgid "f-string expression part cannot include a '#'"
msgstr ""
#: py/parse.c
msgid "f-string expression part cannot include a backslash"
msgstr ""
#: py/parse.c
msgid "f-string: empty expression not allowed"
msgstr ""
#: py/parse.c
msgid "f-string: expecting '}'"
msgstr ""
#: py/parse.c
msgid "f-string: single '}' is not allowed"
msgstr ""
#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
#: shared-bindings/displayio/OnDiskBitmap.c
msgid "file must be a file opened in byte mode"
msgstr "file musi być otwarte w trybie bajtowym"
#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr "system plików musi mieć metodę mount"
#: extmod/ulab/code/ndarray.c
msgid "first argument must be an iterable"
msgstr ""
#: extmod/ulab/code/vectorise.c
msgid "first argument must be an ndarray"
msgstr ""
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr "pierwszy argument super() musi być typem"
#: extmod/machine_spi.c
msgid "firstbit must be MSB"
msgstr "firstbit musi być MSB"
#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr ""
#: extmod/ulab/code/numerical.c
msgid "flip argument must be an ndarray"
msgstr ""
#: py/objint.c
msgid "float too big"
msgstr "float zbyt wielki"
#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr "font musi mieć 2048 bajtów długości"
#: py/objstr.c
msgid "format requires a dict"
msgstr "format wymaga słownika"
#: py/objdeque.c
msgid "full"
msgstr "pełny"
#: py/argcheck.c
msgid "function does not take keyword arguments"
msgstr "funkcja nie bierze argumentów nazwanych"
#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr "funkcja bierze najwyżej %d argumentów, jest %d"
#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr "funkcja dostała wiele wartości dla argumentu '%q'"
#: extmod/ulab/code/compare.c
msgid "function is implemented for scalars and ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr "brak %d wymaganych argumentów pozycyjnych funkcji"
#: py/bc.c
msgid "function missing keyword-only argument"
msgstr "brak argumentu nazwanego funkcji"
#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr "brak wymaganego argumentu nazwanego '%q' funkcji"
#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr "brak wymaganego argumentu pozycyjnego #%d funkcji"
#: py/argcheck.c py/bc.c py/objnamedtuple.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr "funkcja wymaga %d argumentów pozycyjnych, ale jest %d"
#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr "funkcja wymaga dokładnie 9 argumentów"
#: py/objgenerator.c
msgid "generator already executing"
msgstr "generator już się wykonuje"
#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr "generator zignorował GeneratorExit"
#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr "graphic musi mieć 2048 bajtów długości"
#: extmod/moduheapq.c
msgid "heap must be a list"
msgstr "heap musi być listą"
#: py/compile.c
msgid "identifier redefined as global"
msgstr "nazwa przedefiniowana jako globalna"
#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr "nazwa przedefiniowana jako nielokalna"
#: py/objstr.c
msgid "incomplete format"
msgstr "niepełny format"
#: py/objstr.c
msgid "incomplete format key"
msgstr "niepełny klucz formatu"
#: extmod/modubinascii.c
msgid "incorrect padding"
msgstr "złe wypełnienie"
#: extmod/ulab/code/ndarray.c
msgid "index is out of bounds"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "indeks poza zakresem"
#: py/obj.c
msgid "indices must be integers"
msgstr "indeksy muszą być całkowite"
#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""
#: py/compile.c
msgid "inline assembler must be a function"
msgstr "wtrącony asembler musi być funkcją"
#: extmod/ulab/code/create.c
msgid "input argument must be an integer or a 2-tuple"
msgstr ""
#: extmod/ulab/code/fft.c
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/poly.c
msgid "input data must be an iterable"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "input matrix is asymmetric"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "input must be square matrix"
msgstr ""
#: extmod/ulab/code/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr ""
#: extmod/ulab/code/poly.c
msgid "input vectors must be of equal length"
msgstr ""
#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "argument 2 do int() busi być pomiędzy 2 a 36"
#: py/objstr.c
msgid "integer required"
msgstr "wymagana liczba całkowita"
#: shared-bindings/_bleio/Adapter.c
#, c-format
msgid "interval must be in range %s-%s"
msgstr ""
#: extmod/machine_i2c.c
msgid "invalid I2C peripheral"
msgstr "złe I2C"
#: extmod/machine_spi.c
msgid "invalid SPI peripheral"
msgstr "złe SPI"
#: lib/netutils/netutils.c
msgid "invalid arguments"
msgstr "złe arguemnty"
#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "zły ceryfikat"
#: extmod/uos_dupterm.c
msgid "invalid dupterm index"
msgstr "zły indeks dupterm"
#: extmod/modframebuf.c
msgid "invalid format"
msgstr "zły format"
#: py/objstr.c
msgid "invalid format specifier"
msgstr "zła specyfikacja formatu"
#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "zły klucz"
#: py/compile.c
msgid "invalid micropython decorator"
msgstr "zły dekorator micropythona"
#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr "zły krok"
#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr "zła składnia"
#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr "zła składnia dla liczby całkowitej"
#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr "zła składnia dla liczby całkowitej w bazie %d"
#: py/parsenum.c
msgid "invalid syntax for number"
msgstr "zła składnia dla liczby"
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "argument 1 dla issubclass() musi być klasą"
#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr "argument 2 dla issubclass() musi być klasą lub krotką klas"
#: extmod/ulab/code/ndarray.c
msgid "iterables are not of the same length"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "iterations did not converge"
msgstr ""
#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr "join oczekuje listy str/bytes zgodnych z self"
#: py/argcheck.c
msgid "keyword argument(s) not yet implemented - use normal args instead"
msgstr "argumenty nazwane nieobsługiwane - proszę użyć zwykłych argumentów"
#: py/bc.c
msgid "keywords must be strings"
msgstr "słowa kluczowe muszą być łańcuchami"
#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr "etykieta '%q' niezdefiniowana"
#: py/compile.c
msgid "label redefined"
msgstr "etykieta przedefiniowana"
#: py/stream.c
msgid "length argument not allowed for this type"
msgstr "ten typ nie pozawala na podanie długości"
#: shared-bindings/audiomixer/MixerVoice.c
msgid "level must be between 0 and 1"
msgstr ""
#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr "lewa i prawa strona powinny być kompatybilne"
#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr "local '%q' jest typu '%q' lecz źródło jest '%q'"
#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr "local '%q' użyty zanim typ jest znany"
#: py/vm.c
msgid "local variable referenced before assignment"
msgstr "zmienna lokalna użyta przed przypisaniem"
#: py/objint.c
msgid "long int not supported in this build"
msgstr "long int jest nieobsługiwany"
#: py/parse.c
msgid "malformed f-string"
msgstr ""
#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr "bufor mapy zbyt mały"
#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr "błąd domeny"
#: extmod/ulab/code/linalg.c
msgid "matrix dimensions do not match"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "matrix is not positive definite"
msgstr ""
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "przekroczono dozwoloną głębokość rekurencji"
#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr "alokacja pamięci nie powiodła się, alokowano %u bajtów"
#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr "alokacja pamięci nie powiodła się, sterta zablokowana"
#: py/builtinimport.c
msgid "module not found"
msgstr "brak modułu"
#: extmod/ulab/code/poly.c
msgid "more degrees of freedom than data points"
msgstr ""
#: py/compile.c
msgid "multiple *x in assignment"
msgstr "wiele *x w przypisaniu"
#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr "konflikt w planie instancji z powodu wielu baz"
#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr "wielokrotne dziedzicznie niewspierane"
#: py/emitnative.c
msgid "must raise an object"
msgstr "wyjątek musi być obiektem"
#: extmod/machine_spi.c
msgid "must specify all of sck/mosi/miso"
msgstr "sck/mosi/miso muszą być podane"
#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr "funkcja key musi być podana jako argument nazwany"
#: extmod/ulab/code/numerical.c
msgid "n must be between 0, and 9"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "nazwa '%q' niezdefiniowana"
#: py/runtime.c
msgid "name not defined"
msgstr "nazwa niezdefiniowana"
#: py/compile.c
msgid "name reused for argument"
msgstr "nazwa użyta ponownie jako argument"
#: py/emitnative.c
msgid "native yield"
msgstr "natywny yield"
#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr "potrzeba więcej niż %d do rozpakowania"
#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
msgstr "ujemna potęga, ale brak obsługi liczb zmiennoprzecinkowych"
#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
msgstr "ujemne przesunięcie"
#: py/vm.c
msgid "no active exception to reraise"
msgstr "brak wyjątku do ponownego rzucenia"
#: shared-bindings/socket/__init__.c shared-module/network/__init__.c
msgid "no available NIC"
msgstr "brak wolnego NIC"
#: py/compile.c
msgid "no binding for nonlocal found"
msgstr "brak wiązania dla zmiennej nielokalnej"
#: py/builtinimport.c
msgid "no module named '%q'"
msgstr "brak modułu o nazwie '%q'"
#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c
#: shared-bindings/displayio/ParallelBus.c
msgid "no reset pin available"
msgstr ""
#: py/runtime.c
msgid "no such attribute"
msgstr "nie ma takiego atrybutu"
#: ports/nrf/common-hal/_bleio/Connection.c
msgid "non-UUID found in service_uuids_whitelist"
msgstr ""
#: py/compile.c
msgid "non-default argument follows default argument"
msgstr "argument z wartością domyślną przed argumentem bez"
#: extmod/modubinascii.c
msgid "non-hex digit found"
msgstr "cyfra nieszesnastkowa"
#: py/compile.c
msgid "non-keyword arg after */**"
msgstr "argument nienazwany po */**"
#: py/compile.c
msgid "non-keyword arg after keyword arg"
msgstr "argument nienazwany po nazwanym"
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr "to nie jest 128-bitowy UUID"
#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr "nie wszystkie argumenty wykorzystane w formatowaniu"
#: py/objstr.c
msgid "not enough arguments for format string"
msgstr "nie dość argumentów przy formatowaniu"
#: extmod/ulab/code/poly.c
msgid "number of arguments must be 2, or 3"
msgstr ""
#: extmod/ulab/code/create.c
msgid "number of points must be at least 2"
msgstr ""
#: py/obj.c
#, c-format
msgid "object '%s' is not a tuple or list"
msgstr "obiekt '%s' nie jest krotką ani listą"
#: py/obj.c
msgid "object does not support item assignment"
msgstr "obiekt nie obsługuje przypisania do elementów"
#: py/obj.c
msgid "object does not support item deletion"
msgstr "obiekt nie obsługuje usuwania elementów"
#: py/obj.c
msgid "object has no len"
msgstr "obiekt nie ma len"
#: py/obj.c
msgid "object is not subscriptable"
msgstr "obiekt nie ma elementów"
#: py/runtime.c
msgid "object not an iterator"
msgstr "obiekt nie jest iteratorem"
#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr "obiekt nie jest wywoływalny"
#: py/sequence.c shared-bindings/displayio/Group.c
msgid "object not in sequence"
msgstr "obiektu nie ma sekwencji"
#: py/runtime.c
msgid "object not iterable"
msgstr "obiekt nie jest iterowalny"
#: py/obj.c
#, c-format
msgid "object of type '%s' has no len()"
msgstr "obiekt typu '%s' nie ma len()"
#: py/obj.c
msgid "object with buffer protocol required"
msgstr "wymagany obiekt z protokołem buforu"
#: extmod/modubinascii.c
msgid "odd-length string"
msgstr "łańcuch o nieparzystej długości"
#: py/objstr.c py/objstrunicode.c
msgid "offset out of bounds"
msgstr "offset poza zakresem"
#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only bit_depth=16 is supported"
msgstr ""
#: ports/nrf/common-hal/audiobusio/PDMIn.c
msgid "only sample_rate=16000 is supported"
msgstr ""
#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
#: shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr "tylko fragmenty ze step=1 (lub None) są wspierane"
#: extmod/ulab/code/compare.c extmod/ulab/code/ndarray.c
#: extmod/ulab/code/vectorise.c
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr ""
#: py/modbuiltins.c
msgid "ord expects a character"
msgstr "ord oczekuje znaku"
#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr "ord() oczekuje znaku, a jest łańcuch od długości %d"
#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr "przepełnienie przy konwersji long in to słowa maszynowego"
#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr "paleta musi mieć 32 bajty długości"
#: shared-bindings/displayio/Palette.c
msgid "palette_index should be an int"
msgstr "palette_index powinien być całkowity"
#: py/compile.c
msgid "parameter annotation must be an identifier"
msgstr "anotacja parametru musi być identyfikatorem"
#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr "parametry muszą być rejestrami w kolejności a2 do a5"
#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr "parametry muszą być rejestrami w kolejności r0 do r3"
#: shared-bindings/displayio/Bitmap.c
msgid "pixel coordinates out of bounds"
msgstr "współrzędne piksela poza zakresem"
#: shared-bindings/displayio/Bitmap.c
msgid "pixel value requires too many bits"
msgstr "wartość piksela wymaga zbyt wielu bitów"
#: shared-bindings/displayio/TileGrid.c
msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
msgstr ""
"pixel_shader musi być typu displayio.Palette lub dispalyio.ColorConverter"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr "pop z pustego PulseIn"
#: py/objset.c
msgid "pop from an empty set"
msgstr "pop z pustego zbioru"
#: py/objlist.c
msgid "pop from empty list"
msgstr "pop z pustej listy"
#: py/objdict.c
msgid "popitem(): dictionary is empty"
msgstr "popitem(): słownik jest pusty"
#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr "trzeci argument pow() nie może być 0"
#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr "trzyargumentowe pow() wymaga liczb całkowitych"
#: extmod/modutimeq.c
msgid "queue overflow"
msgstr "przepełnienie kolejki"
#: py/parse.c
msgid "raw f-strings are not implemented"
msgstr ""
#: extmod/ulab/code/fft.c
msgid "real and imaginary parts must be of equal length"
msgstr ""
#: py/builtinimport.c
msgid "relative import"
msgstr "relatywny import"
#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr "zażądano długości %d ale obiekt ma długość %d"
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "anotacja wartości musi być identyfikatorem"
#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr "return oczekiwał '%q', a jest '%q'"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "right hand side must be an ndarray, or a scalar"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
msgstr "rsplit(None,n)"
#: shared-bindings/audiocore/RawSample.c
msgid ""
"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
"'B'"
msgstr ""
"bufor sample_source musi być bytearray lub tablicą typu 'h', 'H', 'b' lub 'B'"
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr "częstotliwość próbkowania poza zakresem"
#: py/modmicropython.c
msgid "schedule stack full"
msgstr "stos planu pełen"
#: lib/utils/pyexec.c py/builtinimport.c
msgid "script compilation not supported"
msgstr "kompilowanie skryptów nieobsługiwane"
#: extmod/ulab/code/ndarray.c
msgid "shape must be a 2-tuple"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr "znak jest niedopuszczalny w specyfikacji formatu łańcucha"
#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr "znak jest niedopuszczalny w specyfikacji 'c'"
#: py/objstr.c
msgid "single '}' encountered in format string"
msgstr "pojedynczy '}' w specyfikacji formatu"
#: extmod/ulab/code/linalg.c
msgid "size is defined for ndarrays only"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr "okres snu musi być nieujemny"
#: py/objslice.c py/sequence.c
msgid "slice step cannot be zero"
msgstr "zerowy krok"
#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr "przepełnienie small int"
#: main.c
msgid "soft reboot\n"
msgstr "programowy reset\n"
#: extmod/ulab/code/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "start/end indices"
msgstr "początkowe/końcowe indeksy"
#: shared-bindings/displayio/Shape.c
msgid "start_x should be an int"
msgstr "start_x powinien być całkowity"
#: shared-bindings/random/__init__.c
msgid "step must be non-zero"
msgstr "step nie może być zerowe"
#: shared-bindings/busio/UART.c
msgid "stop must be 1 or 2"
msgstr "stop musi być 1 lub 2"
#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr "stop nie jest osiągalne ze start"
#: py/stream.c
msgid "stream operation not supported"
msgstr "operacja na strumieniu nieobsługiwana"
#: py/objstrunicode.c
msgid "string index out of range"
msgstr "indeks łańcucha poza zakresem"
#: py/objstrunicode.c
#, c-format
msgid "string indices must be integers, not %s"
msgstr "indeksy łańcucha muszą być całkowite, nie %s"
#: py/stream.c
msgid "string not supported; use bytes or bytearray"
msgstr "łańcuchy nieobsługiwane; użyj bytes lub bytearray"
#: extmod/moductypes.c
msgid "struct: cannot index"
msgstr "struct: nie można indeksować"
#: extmod/moductypes.c
msgid "struct: index out of range"
msgstr "struct: indeks poza zakresem"
#: extmod/moductypes.c
msgid "struct: no fields"
msgstr "struct: brak pól"
#: py/objstr.c
msgid "substring not found"
msgstr "brak pod-łańcucha"
#: py/compile.c
msgid "super() can't find self"
msgstr "super() nie może znaleźć self"
#: extmod/modujson.c
msgid "syntax error in JSON"
msgstr "błąd składni w JSON"
#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr "błąd składni w deskryptorze uctypes"
#: shared-bindings/touchio/TouchIn.c
msgid "threshold must be in the range 0-65536"
msgstr "threshold musi być w zakresie 0-65536"
#: shared-bindings/time/__init__.c
msgid "time.struct_time() takes a 9-sequence"
msgstr "time.struct_time() wymaga 9-elementowej sekwencji"
#: shared-bindings/busio/UART.c
msgid "timeout must be 0.0-100.0 seconds"
msgstr ""
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "timeout must be >= 0.0"
msgstr "timeout musi być >= 0.0"
#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr "timestamp poza zakresem dla time_t na tej platformie"
#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "zbyt wiele argumentów podanych dla tego formatu"
#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr ""
#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr "zbyt wiele wartości do rozpakowania (oczekiwano %d)"
#: extmod/ulab/code/linalg.c py/objstr.c
msgid "tuple index out of range"
msgstr "indeks krotki poza zakresem"
#: py/obj.c
msgid "tuple/list has wrong length"
msgstr "krotka/lista ma złą długość"
#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "tuple/list required on RHS"
msgstr "wymagana krotka/lista po prawej stronie"
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: shared-bindings/busio/UART.c
msgid "tx and rx cannot both be None"
msgstr "tx i rx nie mogą być oba None"
#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr "typ '%q' nie może być bazowy"
#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr "typ nie może być bazowy"
#: py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr "typ '%q' nie ma atrybutu '%q'"
#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr "type wymaga 1 lub 3 argumentów"
#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr "ulonglong zbyt wielkie"
#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr "operator unarny %q niezaimplementowany"
#: py/parse.c
msgid "unexpected indent"
msgstr "złe wcięcie"
#: py/bc.c
msgid "unexpected keyword argument"
msgstr "zły argument nazwany"
#: py/bc.c py/objnamedtuple.c
msgid "unexpected keyword argument '%q'"
msgstr "zły argument nazwany '%q'"
#: py/lexer.c
msgid "unicode name escapes"
msgstr "nazwy unicode"
#: py/parse.c
msgid "unindent does not match any outer indentation level"
msgstr "wcięcie nie pasuje do żadnego wcześniejszego wcięcia"
#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr "zła specyfikacja konwersji %c"
#: py/objstr.c
#, c-format
msgid "unknown format code '%c' for object of type '%s'"
msgstr "zły kod formatowania '%c' dla obiektu typu '%s'"
#: py/compile.c
msgid "unknown type"
msgstr "zły typ"
#: py/emitnative.c
msgid "unknown type '%q'"
msgstr "zły typ '%q'"
#: py/objstr.c
msgid "unmatched '{' in format"
msgstr "niepasujące '{' for formacie"
#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr "nieczytelny atrybut"
#: shared-bindings/displayio/TileGrid.c
msgid "unsupported %q type"
msgstr "zły typ %q"
#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr "zła instrukcja Thumb '%s' z %d argumentami"
#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr "zła instrukcja Xtensa '%s' z %d argumentami"
#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr "zły znak formatowania '%c' (0x%x) na pozycji %d"
#: py/runtime.c
msgid "unsupported type for %q: '%s'"
msgstr "zły typ dla %q: '%s'"
#: py/runtime.c
msgid "unsupported type for operator"
msgstr "zły typ dla operatora"
#: py/runtime.c
msgid "unsupported types for %q: '%s', '%s'"
msgstr "złe typy dla %q: '%s', '%s'"
#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr ""
#: shared-bindings/displayio/Bitmap.c
msgid "value_count must be > 0"
msgstr "value_count musi być > 0"
#: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/linalg.c
msgid "wrong argument type"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "wrong index type"
msgstr ""
#: py/objstr.c
msgid "wrong number of arguments"
msgstr "zła liczba argumentów"
#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr "zła liczba wartości do rozpakowania"
#: extmod/ulab/code/ndarray.c
msgid "wrong operand type"
msgstr ""
#: shared-module/displayio/Shape.c
msgid "x value out of bounds"
msgstr "x poza zakresem"
#: shared-bindings/displayio/Shape.c
msgid "y should be an int"
msgstr "y powinno być całkowite"
#: shared-module/displayio/Shape.c
msgid "y value out of bounds"
msgstr "y poza zakresem"
#: py/objrange.c
msgid "zero step"
msgstr "zerowy krok"
#~ msgid "Address is not %d bytes long or is in wrong format"
#~ msgstr "Adres nie ma długości %d bajtów lub zły format"
#~ msgid "Attempted heap allocation when MicroPython VM not running.\n"
#~ msgstr "Próba alokacji pamięci na stercie gdy VM nie działa.\n"
#~ msgid "Can not use dotstar with %s"
#~ msgstr "Nie można używać dotstar z %s"
#~ msgid "Can't add services in Central mode"
#~ msgstr "Nie można dodać serwisów w trybie Central"
#~ msgid "Can't advertise in Central mode"
#~ msgstr "Nie można rozgłaszać w trybie Central"
#~ msgid "Can't change the name in Central mode"
#~ msgstr "Nie można zmienić nazwy w trybie Central"
#~ msgid "Can't connect in Peripheral mode"
#~ msgstr "Nie można się łączyć w trybie Peripheral"
#~ msgid "Characteristic UUID doesn't match Service UUID"
#~ msgstr "UUID charakterystyki inny niż UUID serwisu"
#~ msgid "Characteristic already in use by another Service."
#~ msgstr "Charakterystyka w użyciu w innym serwisie"
#~ msgid "Could not decode ble_uuid, err 0x%04x"
#~ msgstr "Nie można zdekodować ble_uuid, błąd 0x%04x"
#~ msgid "Crash into the HardFault_Handler.\n"
#~ msgstr "Katastrofa w HardFault_Handler.\n"
#~ msgid "Data too large for the advertisement packet"
#~ msgstr "Zbyt dużo danych pakietu rozgłoszeniowego"
#~ msgid "Failed to acquire mutex"
#~ msgstr "Nie udało się uzyskać blokady"
#, fuzzy
#~ msgid "Failed to add characteristic, err 0x%04x"
#~ msgstr "Nie udało się dodać charakterystyki, błąd 0x$04x"
#~ msgid "Failed to add service"
#~ msgstr "Nie udało się dodać serwisu"
#~ msgid "Failed to add service, err 0x%04x"
#~ msgstr "Nie udało się dodać serwisu, błąd 0x%04x"
#~ msgid "Failed to change softdevice state"
#~ msgstr "Nie udało się zmienić stanu softdevice"
#~ msgid "Failed to connect:"
#~ msgstr "Nie udało się połączenie:"
#~ msgid "Failed to continue scanning"
#~ msgstr "Nie udała się kontynuacja skanowania"
#~ msgid "Failed to continue scanning, err 0x%04x"
#~ msgstr "Nie udała się kontynuacja skanowania, błąd 0x%04x"
#~ msgid "Failed to create mutex"
#~ msgstr "Nie udało się stworzyć blokady"
#~ msgid "Failed to discover services"
#~ msgstr "Nie udało się odkryć serwisów"
#~ msgid "Failed to get local address"
#~ msgstr "Nie udało się uzyskać lokalnego adresu"
#~ msgid "Failed to get softdevice state"
#~ msgstr "Nie udało się odczytać stanu softdevice"
#~ msgid "Failed to notify or indicate attribute value, err 0x%04x"
#~ msgstr "Nie udało się powiadomić o wartości atrybutu, błąd 0x%04x"
#~ msgid "Failed to read CCCD value, err 0x%04x"
#~ msgstr "Nie udało się odczytać CCCD, błąd 0x%04x"
#~ msgid "Failed to read attribute value, err 0x%04x"
#~ msgstr "Nie udało się odczytać wartości atrybutu, błąd 0x%04x"
#~ msgid "Failed to read gatts value, err 0x%04x"
#~ msgstr "Nie udało się odczytać gatts, błąd 0x%04x"
#~ msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
#~ msgstr "Nie udało się zarejestrować UUID dostawcy, błąd 0x%04x"
#~ msgid "Failed to release mutex"
#~ msgstr "Nie udało się zwolnić blokady"
#~ msgid "Failed to start advertising"
#~ msgstr "Nie udało się rozpocząć rozgłaszania"
#~ msgid "Failed to start advertising, err 0x%04x"
#~ msgstr "Nie udało się rozpocząć rozgłaszania, błąd 0x%04x"
#~ msgid "Failed to start scanning"
#~ msgstr "Nie udało się rozpocząć skanowania"
#~ msgid "Failed to start scanning, err 0x%04x"
#~ msgstr "Nie udało się rozpocząć skanowania, błąd 0x%04x"
#~ msgid "Failed to stop advertising"
#~ msgstr "Nie udało się zatrzymać rozgłaszania"
#~ msgid "Failed to stop advertising, err 0x%04x"
#~ msgstr "Nie udało się zatrzymać rozgłaszania, błąd 0x%04x"
#~ msgid "Failed to write attribute value, err 0x%04x"
#~ msgstr "Nie udało się zapisać atrybutu, błąd 0x%04x"
#~ msgid "Failed to write gatts value, err 0x%04x"
#~ msgstr "Nie udało się zapisać gatts, błąd 0x%04x"
#~ msgid "Flash erase failed"
#~ msgstr "Nie udało się skasować flash"
#~ msgid "Flash erase failed to start, err 0x%04x"
#~ msgstr "Nie udało się rozpocząć kasowania flash, błąd 0x%04x"
#~ msgid "Flash write failed"
#~ msgstr "Zapis do flash nie powiódł się"
#~ msgid "Flash write failed to start, err 0x%04x"
#~ msgstr "Nie udało się rozpocząć zapisu do flash, błąd 0x%04x"
#~ msgid "Invalid bit clock pin"
#~ msgstr "Zła nóżka zegara"
#~ msgid "Invalid clock pin"
#~ msgstr "Zła nóżka zegara"
#~ msgid "Invalid data pin"
#~ msgstr "Zła nóżka danych"
#~ msgid ""
#~ "Looks like our core CircuitPython code crashed hard. Whoops!\n"
#~ "Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
#~ " with the contents of your CIRCUITPY drive and this message:\n"
#~ msgstr ""
#~ "Ojej, wygląda na to, że CircuitPython natrafił na poważny problem!\n"
#~ "Prosimy o zgłoszenie błędu pod adresem https://github.com/adafruit/"
#~ "circuitpython/issues\n"
#~ " z zawartością dysku CIRCUITPY oraz tym komunikatem:\n"
#~ msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
#~ msgstr ""
#~ "Skok NLR MicroPythona nie powiódł się. Prawdopodobne skażenie pamięci.\n"
#~ msgid "MicroPython fatal error.\n"
#~ msgstr "Krytyczny błąd MicroPythona.\n"
#~ msgid "Must be a Group subclass."
#~ msgstr "Musi dziedziczyć z Group."
#~ msgid ""
#~ "Only monochrome, indexed 8bpp, and 16bpp or greater BMPs supported: %d "
#~ "bpp given"
#~ msgstr "Wspierane są tylko pliki BMP czarno-białe, 8bpp i 16bpp: %d bpp "
#~ msgid "Only slices with step=1 (aka None) are supported"
#~ msgstr "Wspierane są tylko fragmenty z step=1 (albo None)"
#~ msgid "Pixel beyond bounds of buffer"
#~ msgstr "Piksel poza granicami bufora"
#~ msgid "Range out of bounds"
#~ msgstr "Zakres poza granicami"
#~ msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
#~ msgstr "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
#~ msgid ""
#~ "The CircuitPython heap was corrupted because the stack was too small.\n"
#~ "Please increase stack size limits and press reset (after ejecting "
#~ "CIRCUITPY).\n"
#~ "If you didn't change the stack, then file an issue here with the contents "
#~ "of your CIRCUITPY drive:\n"
#~ msgstr ""
#~ "Sterta CircuitPythona jest skażona z powodu zbyt małego stosu.\n"
#~ "Proszę zwiększyć limity wielkości stosu i nazisnąć reset (po odmontowaniu "
#~ "CIRCUITPY).\n"
#~ "Jeśli wielkość stosu nie była zmieniana, proszę zgłosić błąd zawierający "
#~ "zawartość CIRCUITPY tutaj:\n"
#~ msgid ""
#~ "The microcontroller's power dipped. Please make sure your power supply "
#~ "provides\n"
#~ "enough power for the whole circuit and press reset (after ejecting "
#~ "CIRCUITPY).\n"
#~ msgstr ""
#~ "Zasilanie mikrokontrolera gwałtownie spadło. Proszę upewnić się,\n"
#~ "że zasilanie jest wystarczające dla całego obwodu in nacisnąć reset (po "
#~ "odmontowaniu CIRCUITPY).\n"
#~ msgid ""
#~ "The reset button was pressed while booting CircuitPython. Press again to "
#~ "exit safe mode.\n"
#~ msgstr ""
#~ "Przycisk reset został wciśnięty podczas startu CircuitPythona. Wciśnij go "
#~ "ponownie aby wyjść z trybu bezpieczeństwa.\n"
#~ msgid "Tile indices must be 0 - 255"
#~ msgstr "Indeks kafelka musi być pomiędzy 0 a 255 włącznie"
#~ msgid "To exit, please reset the board without "
#~ msgstr "By wyjść, proszę zresetować płytkę bez "
#~ msgid "UUID integer value not in range 0 to 0xffff"
#~ msgstr "Wartość UUID poza zakresem 0 do 0xffff"
#~ msgid "Voice index too high"
#~ msgstr "Zbyt wysoki indeks głosu"
#~ msgid ""
#~ "You are running in safe mode which means something unanticipated "
#~ "happened.\n"
#~ msgstr ""
#~ "Uruchomiono w trybie bezpieczeństwa, gdyż nastąpiło coś nieoczekiwanego.\n"
#~ msgid "bad GATT role"
#~ msgstr "zła rola GATT"
#~ msgid "buf is too small. need %d bytes"
#~ msgstr "buf zbyt mały. Wymagane %d bajtów"
#~ msgid "byteorder is not an instance of ByteOrder (got a %s)"
#~ msgstr "byteorder musi być typu ByteOrder (jest %s)"
#~ msgid "characteristics includes an object that is not a Characteristic"
#~ msgstr ""
#~ "charakterystyki zawierają obiekt, który nie jest typu Characteristic"
#~ msgid "color buffer must be a buffer or int"
#~ msgstr "bufor kolorów musi być typu buffer lub int"
#~ msgid "interval not in range 0.0020 to 10.24"
#~ msgstr "przedział poza zakresem 0.0020 do 10.24"
#~ msgid "name must be a string"
#~ msgstr "nazwa musi być łańcuchem"
#~ msgid "rawbuf is not the same size as buf"
#~ msgstr "rawbuf nie jest tej samej wielkości co buf"
#~ msgid "services includes an object that is not a Service"
#~ msgstr "obiekt typu innego niż Service w services"
#~ msgid "tile index out of bounds"
#~ msgstr "indeks kafelka poza zakresem"
#~ msgid "time.struct_time() takes exactly 1 argument"
#~ msgstr "time.struct_time() wymaga jednego argumentu"
#~ msgid "timeout >100 (units are now seconds, not msecs)"
#~ msgstr "timeout > 100 (jednostkami są sekundy)"
#~ msgid "unknown format code '%c' for object of type 'float'"
#~ msgstr "zły kod foratowania '%c' dla obiektu typu 'float'"
#~ msgid "unknown format code '%c' for object of type 'str'"
#~ msgstr "zły kod formatowania '%c' dla obiektu typu 'str'"
#~ msgid "write_args must be a list, tuple, or None"
#~ msgstr "write_args musi być listą, krotką lub None"
Reference in New Issue View Git Blame Copy Permalink