40118bcf57
This changes lots of files to unify `board.h` across ports. It adds `board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to deinit the board before deep sleeping (even when pretending.) Deep sleep is now a two step process for the port. First, the port should prepare to deep sleep based on the given alarms. It should set alarms for both deep and pretend sleep. In particular, the pretend versions should be set immediately so that we don't miss an alarm as we shutdown. These alarms should also wake from `port_idle_until_interrupt` which is used when pretending to deep sleep. Second, when real deep sleeping, `alarm_enter_deep_sleep` is called. The port should set any alarms it didn't during prepare based on data it saved internally during prepare. ESP32-S2 sleep is a bit reorganized to locate more logic with TimeAlarm. This will help it scale to more alarm types. Fixes #3786 |
||
|---|---|---|
| .. | ||
| boards/fomu | ||
| common-hal | ||
| hw | ||
| supervisor | ||
| .gitignore | ||
| background.c | ||
| background.h | ||
| crt0-vexriscv.S | ||
| fatfs_port.c | ||
| irq.h | ||
| Makefile | ||
| mpconfigport.h | ||
| mpconfigport.mk | ||
| mphalport.c | ||
| mphalport.h | ||
| qstrdefsport.h | ||
| README.rst | ||
LiteX (FPGA) ============ `LiteX <https://github.com/enjoy-digital/litex>`_ is a Python-based System on a Chip (SoC) designer for open source supported Field Programmable Gate Array (FPGA) chips. This means that the CPU core(s) and peripherals are not defined by the physical chip. Instead, they are loaded as separate "gateware". Once this gateware is loaded, CircuitPython can be loaded on top of it to work as expected. Installation ------------- You'll need ``dfu-util`` to install CircuitPython on the Fomu. Make sure the foboot bootloader is updated. Instructions are here: https://github.com/im-tomu/fomu-workshop/blob/master/docs/bootloader.rst Once you've updated the bootloader, you should know how to use ``dfu-util``. It's pretty easy! To install CircuitPython do: .. code-block:: shell dfu-util -D adafruit-circuitpython-fomu-en_US-<version>.dfu It will install and then restart. CIRCUITPY should appear as it usually does and work the same.