306 lines
8.4 KiB
Plaintext
306 lines
8.4 KiB
Plaintext
/* Based on GCC ARM embedded samples.
|
|
Defines the following symbols for use by code:
|
|
__exidx_start
|
|
__exidx_end
|
|
__etext
|
|
__data_start__
|
|
__preinit_array_start
|
|
__preinit_array_end
|
|
__init_array_start
|
|
__init_array_end
|
|
__fini_array_start
|
|
__fini_array_end
|
|
__data_end__
|
|
__bss_start__
|
|
__bss_end__
|
|
__end__
|
|
end
|
|
__HeapLimit
|
|
__StackLimit
|
|
__StackTop
|
|
__stack (== StackTop)
|
|
*/
|
|
|
|
firmware_size = DEFINED(firmware_size) ? firmware_size : 1020K ;
|
|
|
|
MEMORY
|
|
{
|
|
FLASH_FIRMWARE (rx) : ORIGIN = 0x10000000, LENGTH = firmware_size
|
|
/* Followed by: 4kB of NVRAM and at least 1024kB of CIRCUITPY */
|
|
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 256k
|
|
SCRATCH_Y (rwx) : ORIGIN = 0x20040000, LENGTH = 4k
|
|
/* X is used by core 1 so we put it last. */
|
|
SCRATCH_X (rwx) : ORIGIN = 0x20041000, LENGTH = 4k
|
|
}
|
|
|
|
ENTRY(_entry_point)
|
|
|
|
SECTIONS
|
|
{
|
|
/* Second stage bootloader is prepended to the image. It must be 256 bytes big
|
|
and checksummed. It is usually built by the boot_stage2 target
|
|
in the Pico SDK
|
|
*/
|
|
|
|
.flash_begin : {
|
|
__flash_binary_start = .;
|
|
} > FLASH_FIRMWARE
|
|
|
|
.boot2 : {
|
|
__boot2_start__ = .;
|
|
KEEP (*(.boot2))
|
|
__boot2_end__ = .;
|
|
} > FLASH_FIRMWARE
|
|
|
|
ASSERT(__boot2_end__ - __boot2_start__ == 256,
|
|
"ERROR: Pico second stage bootloader must be 256 bytes in size")
|
|
|
|
/* The second stage will always enter the image at the start of .text.
|
|
The debugger will use the ELF entry point, which is the _entry_point
|
|
symbol if present, otherwise defaults to start of .text.
|
|
This can be used to transfer control back to the bootrom on debugger
|
|
launches only, to perform proper flash setup.
|
|
*/
|
|
|
|
.text : {
|
|
__logical_binary_start = .;
|
|
KEEP (*(.vectors))
|
|
KEEP (*(.binary_info_header))
|
|
__binary_info_header_end = .;
|
|
KEEP (*(.reset))
|
|
/* TODO revisit this now memset/memcpy/float in ROM */
|
|
/* bit of a hack right now to exclude all floating point and time critical (e.g. memset, memcpy) code from
|
|
* FLASH ... we will include any thing excluded here in .data below by default */
|
|
*(.init)
|
|
|
|
__property_getter_start = .;
|
|
*(.property_getter)
|
|
__property_getter_end = .;
|
|
__property_getset_start = .;
|
|
*(.property_getset)
|
|
__property_getset_end = .;
|
|
|
|
*(EXCLUDE_FILE(*libgcc.a: *libc.a:*lib_a-mem*.o *libm.a: *interp.o *divider.o *tusb_fifo.o *mem_ops_aeabi.o *usbh.o) .text*)
|
|
/* Allow everything in usbh.o except tuh_task_event_ready because we read it from core 1. */
|
|
*usbh.o (.text.[_uphc]* .text.tuh_[cmvied]* .text.tuh_task_ext*)
|
|
*(.fini)
|
|
/* Pull all c'tors into .text */
|
|
*crtbegin.o(.ctors)
|
|
*crtbegin?.o(.ctors)
|
|
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
|
*(SORT(.ctors.*))
|
|
*(.ctors)
|
|
/* Followed by destructors */
|
|
*crtbegin.o(.dtors)
|
|
*crtbegin?.o(.dtors)
|
|
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
|
*(SORT(.dtors.*))
|
|
*(.dtors)
|
|
|
|
*(.eh_frame*)
|
|
. = ALIGN(4);
|
|
} > FLASH_FIRMWARE
|
|
|
|
.rodata : {
|
|
*(EXCLUDE_FILE(*libgcc.a: *libc.a:*lib_a-mem*.o *libm.a:) .rodata*)
|
|
. = ALIGN(4);
|
|
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.flashdata*)))
|
|
. = ALIGN(4);
|
|
} > FLASH_FIRMWARE
|
|
|
|
.ARM.extab :
|
|
{
|
|
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
|
} > FLASH_FIRMWARE
|
|
|
|
__exidx_start = .;
|
|
.ARM.exidx :
|
|
{
|
|
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
|
} > FLASH_FIRMWARE
|
|
__exidx_end = .;
|
|
|
|
/* Machine inspectable binary information */
|
|
. = ALIGN(4);
|
|
__binary_info_start = .;
|
|
.binary_info :
|
|
{
|
|
KEEP(*(.binary_info.keep.*))
|
|
*(.binary_info.*)
|
|
} > FLASH_FIRMWARE
|
|
__binary_info_end = .;
|
|
. = ALIGN(4);
|
|
|
|
/* End of .text-like segments */
|
|
__etext = .;
|
|
|
|
.ram_vector_table (COPY): {
|
|
*(.ram_vector_table)
|
|
} > RAM
|
|
|
|
.data : {
|
|
__data_start__ = .;
|
|
*(vtable)
|
|
|
|
*(EXCLUDE_FILE(*tmds_encode.o) .time_critical*)
|
|
|
|
/* remaining .text and .rodata; i.e. stuff we exclude above because we want it in RAM */
|
|
*(.text*)
|
|
. = ALIGN(4);
|
|
*(.rodata*)
|
|
. = ALIGN(4);
|
|
|
|
*(.data*)
|
|
|
|
. = ALIGN(4);
|
|
*(.after_data.*)
|
|
. = ALIGN(4);
|
|
/* preinit data */
|
|
PROVIDE_HIDDEN (__mutex_array_start = .);
|
|
KEEP(*(SORT(.mutex_array.*)))
|
|
KEEP(*(.mutex_array))
|
|
PROVIDE_HIDDEN (__mutex_array_end = .);
|
|
|
|
. = ALIGN(4);
|
|
/* preinit data */
|
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
KEEP(*(SORT(.preinit_array.*)))
|
|
KEEP(*(.preinit_array))
|
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
|
|
. = ALIGN(4);
|
|
/* init data */
|
|
PROVIDE_HIDDEN (__init_array_start = .);
|
|
KEEP(*(SORT(.init_array*)))
|
|
KEEP(*(.init_array))
|
|
PROVIDE_HIDDEN (__init_array_end = .);
|
|
|
|
. = ALIGN(4);
|
|
/* finit data */
|
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
*(SORT(.fini_array.*))
|
|
*(.fini_array)
|
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
|
|
*(.jcr)
|
|
. = ALIGN(4);
|
|
/* All data end */
|
|
__data_end__ = .;
|
|
} > RAM AT> FLASH_FIRMWARE
|
|
|
|
.itcm :
|
|
{
|
|
. = ALIGN(4);
|
|
*(.itcm.*)
|
|
|
|
. = ALIGN(4);
|
|
} > RAM AT> FLASH_FIRMWARE
|
|
_ld_itcm_destination = ADDR(.itcm);
|
|
_ld_itcm_flash_copy = LOADADDR(.itcm);
|
|
_ld_itcm_size = SIZEOF(.itcm);
|
|
|
|
.dtcm_data :
|
|
{
|
|
. = ALIGN(4);
|
|
|
|
*(.dtcm_data.*)
|
|
|
|
. = ALIGN(4);
|
|
} > RAM AT> FLASH_FIRMWARE
|
|
_ld_dtcm_data_destination = ADDR(.dtcm_data);
|
|
_ld_dtcm_data_flash_copy = LOADADDR(.dtcm_data);
|
|
_ld_dtcm_data_size = SIZEOF(.dtcm_data);
|
|
|
|
.dtcm_bss (NOLOAD) :
|
|
{
|
|
. = ALIGN(4);
|
|
|
|
*(.dtcm_bss.*)
|
|
|
|
. = ALIGN(4);
|
|
} > RAM AT> RAM
|
|
_ld_dtcm_bss_start = ADDR(.dtcm_bss);
|
|
_ld_dtcm_bss_size = SIZEOF(.dtcm_bss);
|
|
|
|
.uninitialized_data (COPY): {
|
|
. = ALIGN(4);
|
|
*(.uninitialized_data*)
|
|
} > RAM
|
|
|
|
.bss : {
|
|
. = ALIGN(4);
|
|
__bss_start__ = .;
|
|
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.bss*)))
|
|
*(COMMON)
|
|
. = ALIGN(4);
|
|
__bss_end__ = .;
|
|
} > RAM
|
|
|
|
.heap (COPY):
|
|
{
|
|
__end__ = .;
|
|
end = __end__;
|
|
_ld_cp_dynamic_mem_start = .;
|
|
*(.heap*)
|
|
__HeapLimit = .;
|
|
} > RAM
|
|
|
|
/* Start and end symbols must be word-aligned */
|
|
.scratch_x : {
|
|
__scratch_x_start__ = .;
|
|
*(.scratch_x.*)
|
|
*tmds_encode.o (.time_critical*)
|
|
*timer.o (.text.hardware_alarm_irq_handler)
|
|
. = ALIGN(4);
|
|
__scratch_x_end__ = .;
|
|
} > SCRATCH_X AT > FLASH_FIRMWARE
|
|
__scratch_x_source__ = LOADADDR(.scratch_x);
|
|
|
|
.scratch_y : {
|
|
__scratch_y_start__ = .;
|
|
/* Don't put anything into scratch y because CircuitPython manages it and uses it for core 0 stack.
|
|
/* *(.scratch_y.*) */
|
|
. = ALIGN(4);
|
|
__scratch_y_end__ = .;
|
|
} > SCRATCH_Y AT > FLASH_FIRMWARE
|
|
__scratch_y_source__ = LOADADDR(.scratch_y);
|
|
|
|
/* .stack*_dummy section doesn't contains any symbols. It is only
|
|
* used for linker to calculate size of stack sections, and assign
|
|
* values to stack symbols later
|
|
*
|
|
* stack1 section may be empty/missing if platform_launch_core1 is not used */
|
|
|
|
/* by default we put core 0 stack at the end of scratch Y, so that if core 1
|
|
* stack is not used then all of SCRATCH_X is free.
|
|
*/
|
|
.stack1_dummy (COPY):
|
|
{
|
|
*(.stack1*)
|
|
} > SCRATCH_X
|
|
|
|
.stack_dummy (COPY):
|
|
{
|
|
*(.stack*)
|
|
} > SCRATCH_Y
|
|
|
|
.flash_end : {
|
|
__flash_binary_end = .;
|
|
} > FLASH_FIRMWARE
|
|
|
|
/* stack limit is poorly named, but historically is maximum heap ptr */
|
|
__StackLimit = ORIGIN(RAM) + LENGTH(RAM);
|
|
__StackOneTop = ORIGIN(SCRATCH_X) + LENGTH(SCRATCH_X);
|
|
__StackTop = ORIGIN(SCRATCH_Y) + LENGTH(SCRATCH_Y);
|
|
_ld_cp_dynamic_mem_end = __StackTop;
|
|
__StackOneBottom = __StackOneTop - SIZEOF(.stack1_dummy);
|
|
__StackBottom = __StackTop - SIZEOF(.stack_dummy);
|
|
PROVIDE(__stack = __StackTop);
|
|
|
|
/* Check if data + heap + stack exceeds RAM limit */
|
|
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed")
|
|
|
|
ASSERT( __binary_info_header_end - __logical_binary_start <= 256, "Binary info must be in first 256 bytes of the binary")
|
|
/* todo assert on extra code */
|
|
}
|