circuitpython/locale/el.po

4499 lines
112 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2021-01-04 12:55-0600\n"
"PO-Revision-Date: 2023-11-16 15:03+0000\n"
"Last-Translator: Bill Sideris <bill88t@feline.gr>\n"
"Language-Team: none\n"
"Language: el\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=n != 1;\n"
"X-Generator: Weblate 5.2\n"
#: main.c
msgid ""
"\n"
"Code done running.\n"
msgstr ""
"\n"
"Η εκτέλεση του κώδικα ολοκληρώθηκε.\n"
#: main.c
msgid ""
"\n"
"Code stopped by auto-reload. Reloading soon.\n"
msgstr ""
"\n"
"Ο κώδικας σταμάτησε λόγω της αυτόματης επαναφόρτωσης. Η επαναφόρτωση θα "
"γίνει σύντομα.\n"
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Please file an issue with your program at github.com/adafruit/circuitpython/"
"issues."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"Press reset to exit safe mode.\n"
msgstr ""
"\n"
"Πατήστε reset για να βγείτε από την ασφαλή λειτουργία.\n"
#: supervisor/shared/safe_mode.c
msgid ""
"\n"
"You are in safe mode because:\n"
msgstr ""
"\n"
"Είσαστε τε ασφαλή λειτουργία διότι:\n"
#: py/obj.c
msgid " File \"%q\""
msgstr " Αρχείο \"%q\""
#: py/obj.c
msgid " File \"%q\", line %d"
msgstr " Αρχείο \"%q\", γραμμή %d"
#: py/builtinhelp.c
msgid " is of type %q\n"
msgstr " είναι τύπου %q\n"
#: main.c
msgid " not found.\n"
msgstr " δεν βρέθηκε.\n"
#: main.c
msgid " output:\n"
msgstr " έξοδος:\n"
#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c απαιτεί ακέραιο ή χαρακτήρα"
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d"
msgstr ""
"%d pin διεύθυνσης, %d rgb ping και %d πλακίδια αναδεικνύουν ύψος %d, όχι %d"
#: shared-bindings/microcontroller/Pin.c
msgid "%q and %q contain duplicate pins"
msgstr "%q και %q περιέχουν διπλότυπα pins"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "%q and %q must be different"
msgstr "%q και %q πρεπει να είναι διαφορετικά"
#: shared-bindings/microcontroller/Pin.c
msgid "%q contains duplicate pins"
msgstr "%q περιέχει διπλότυπα pins"
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
msgid "%q failure: %d"
msgstr "%q αποτυχία: %d"
#: py/argcheck.c
msgid "%q in %q must be of type %q, not %q"
msgstr "%q στο %q πρέπει να είναι τύπου %q, όχι %q"
#: ports/espressif/common-hal/espulp/ULP.c
#: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
#: ports/mimxrt10xx/common-hal/usb_host/Port.c
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/usb_host/Port.c
#: shared-bindings/digitalio/DigitalInOut.c
#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q είναι σε χρήση"
#: py/objstr.c
msgid "%q index out of range"
msgstr "%q δείκτης εκτός εμβέλειας"
#: py/obj.c
msgid "%q indices must be integers, not %s"
msgstr "%q δείκτες πρέπει να είναι ακέραιοι, όχι %s"
#: shared-module/bitbangio/SPI.c
msgid "%q init failed"
msgstr "%q εκκίνηση απέτυχε"
#: ports/espressif/bindings/espnow/Peer.c shared-bindings/dualbank/__init__.c
msgid "%q is %q"
msgstr "%q είναι %q"
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "%q is read-only for this board"
msgstr "%q είναι μόνο για ανάγνωση για αυτήν την πλακέτα"
#: py/argcheck.c shared-bindings/usb_hid/Device.c
msgid "%q length must be %d"
msgstr "%q μήκος πρέπει να είναι %d"
#: py/argcheck.c
msgid "%q length must be %d-%d"
msgstr "%q μήκος πρέπει να είναι %d-%d"
#: py/argcheck.c
msgid "%q length must be <= %d"
msgstr "%q μήκος πρέπει να είναι <= %d"
#: py/argcheck.c
msgid "%q length must be >= %d"
msgstr "%q μήκος πρέπει να είναι >= %d"
#: py/objmodule.c py/runtime.c
msgid "%q moved from %q to %q"
msgstr ""
#: py/argcheck.c
msgid "%q must be %d"
msgstr "%q πρέπει να είναι %d"
#: py/argcheck.c shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/is31fl3741/FrameBuffer.c
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "%q must be %d-%d"
msgstr "%q πρέπει να είναι %d-%d"
#: shared-bindings/busdisplay/BusDisplay.c
msgid "%q must be 1 when %q is True"
msgstr "%q πρέπει να είναι 1 όταν %q είναι True"
#: py/argcheck.c shared-bindings/gifio/GifWriter.c
#: shared-module/gifio/OnDiskGif.c
msgid "%q must be <= %d"
msgstr "%q πρέπει να είναι <= %d"
#: ports/espressif/common-hal/watchdog/WatchDogTimer.c
msgid "%q must be <= %u"
msgstr ""
#: py/argcheck.c
msgid "%q must be >= %d"
msgstr "%q πρέπει να είναι >= %d"
#: shared-bindings/analogbufio/BufferedIn.c
msgid "%q must be a bytearray or array of type 'H' or 'B'"
msgstr "%q πρέπει να είναι bytearray ή array τύπου 'H' ή 'B'"
#: shared-bindings/audiocore/RawSample.c
msgid "%q must be a bytearray or array of type 'h', 'H', 'b', or 'B'"
msgstr "%q πρέπει να είναι bytearray ή array τύπου 'h', 'H', 'b', ή 'B'"
#: shared-bindings/warnings/__init__.c
msgid "%q must be a subclass of %q"
msgstr ""
#: ports/espressif/common-hal/analogbufio/BufferedIn.c
msgid "%q must be array of type 'H'"
msgstr "%q πρέπει να είναι πίνακας τύπου 'H'"
#: shared-module/synthio/__init__.c
msgid "%q must be array of type 'h'"
msgstr "%q πρέπει να είναι λίστα τύπου 'h'"
#: ports/raspberrypi/bindings/cyw43/__init__.c py/argcheck.c py/objexcept.c
#: shared-bindings/canio/CAN.c shared-bindings/digitalio/Pull.c
#: shared-module/synthio/Synthesizer.c
msgid "%q must be of type %q or %q, not %q"
msgstr "%q πρέπει να είναι τύπου %q ή %q, όχι %q"
#: py/argcheck.c shared-module/synthio/__init__.c
msgid "%q must be of type %q, not %q"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
msgid "%q must be power of 2"
msgstr "%q πρέπει να είναι δύναμη του 2"
#: shared-bindings/wifi/Monitor.c
msgid "%q out of bounds"
msgstr "%q εκτός ορίων"
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c
#: shared-bindings/canio/Match.c
msgid "%q out of range"
msgstr "%q εκτός εμβέλειας"
#: py/objmodule.c py/runtime.c
msgid "%q renamed %q"
msgstr ""
#: py/objrange.c py/objslice.c shared-bindings/random/__init__.c
msgid "%q step cannot be zero"
msgstr ""
#: py/bc.c py/objnamedtuple.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() παίρνει %d ορίσματα θέσεως αλλά %d δόθηκαν"
#: shared-bindings/usb_hid/Device.c
msgid "%q, %q, and %q must all be the same length"
msgstr "%q, %q, και %q πρέπει να είναι όλα του ιδίου μήκους"
#: py/objint.c shared-bindings/storage/__init__.c
msgid "%q=%q"
msgstr "%q=%q"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] shifts in more bits than pin count"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] shifts out more bits than pin count"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] uses extra pin"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "%q[%u] waits on input outside of count"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
#, c-format
msgid "%s error 0x%x"
msgstr "%s σφάλμα 0x%x"
#: py/argcheck.c
msgid "'%q' argument required"
msgstr "'%q' όρισμα απαιτείται"
#: py/proto.c
msgid "'%q' object does not support '%q'"
msgstr "'%q' αντικείμενο δεν υποστηρίζει '%q'"
#: py/runtime.c
msgid "'%q' object is not an iterator"
msgstr "'%q' αντικείμενο δεν είναι επαναλήπτης"
#: py/objtype.c py/runtime.c shared-module/atexit/__init__.c
msgid "'%q' object is not callable"
msgstr "'%q' αντικείμενο δεν καλείται"
#: py/runtime.c
msgid "'%q' object is not iterable"
msgstr "'%q' αντικείμενο δεν είναι επαναληπτικό"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' περιμένει μια ετικέτα"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' περιμένει έναν καταχωρητή"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' περιμένει έναν ειδικό καταχωρητή"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' περιμένει έναν FPU καταχωρητή"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' περιμένει μια διεύθυνση της μορφής [a, b]"
#: py/emitinlinethumb.c py/emitinlinextensa.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' περιμένει έναν ακέραιο"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' περιμένει το πολύ r%d"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' περιμένει {r0, r1, ...}"
#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d isn't within range %d..%d"
msgstr "'%s' ακέραιος %d δεν είναι μέσα στο επιτρεπτό εύρος %d..%d"
#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x doesn't fit in mask 0x%x"
msgstr "'%s' ακέραιος 0x%x δεν χωράει στην μάσκα 0x%x"
#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item assignment"
msgstr "'%s' αντικείμενο δεν υποστηρίζει ορισμό πράγματος"
#: py/obj.c
#, c-format
msgid "'%s' object doesn't support item deletion"
msgstr "'%s' αντικείμενο δεν υποστηρίζει διαγραφή πράγματος"
#: py/runtime.c
msgid "'%s' object has no attribute '%q'"
msgstr "'%s' αντικείμενο δεν έχει γνώρισμα '%q'"
#: py/obj.c
#, c-format
msgid "'%s' object isn't subscriptable"
msgstr "'%s' αντικείμενο δεν είναι subscriptable"
#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr "Ευθυγράμμιση του '=' δεν επιτρέπεται εντός προσδιοριστή string format"
#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "'S' και 'O' δεν είναι υποστηριζόμενοι τύποι format"
#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' απαιτεί τουλάχιστον ένα όρισμα"
#: py/compile.c
msgid "'await' outside function"
msgstr "'await' εκτός συνάρτησης"
#: py/compile.c
msgid "'break'/'continue' outside loop"
msgstr ""
#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' απαιτεί τουλάχιστον 2 παραμέτρους"
#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' απαιτεί ακέραιες παραμέτρους"
#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' απαιτεί ένα όρισμα"
#: py/compile.c
msgid "'return' outside function"
msgstr "'return' εκτός συνάρτησης"
#: py/compile.c
msgid "'yield from' inside async function"
msgstr "'yield from' εκτός ασύνχρονης συνάρτησης"
#: py/compile.c
msgid "'yield' outside function"
msgstr "'yield' εκτός συνάρτησης"
#: py/compile.c
msgid "* arg after **"
msgstr ""
#: py/compile.c
msgid "*x must be assignment target"
msgstr "*x πρέπει να είναι στόχος ανάθεσης"
#: py/obj.c
msgid ", in %q\n"
msgstr ", στο %q\n"
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/epaperdisplay/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid ".show(x) removed. Use .root_group = x"
msgstr ""
#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr "0.0 σε μία σύνθετη δύναμη"
#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "pow() με 3 παραμέτρους δεν υποστηρίζεται"
#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: ports/atmel-samd/common-hal/countio/Counter.c
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "Ένα κανάλι interrupt υλικού είναι ήδη σε χρήση"
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "AP could not be started"
msgstr ""
#: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c
#, c-format
msgid "Address must be %d bytes long"
msgstr "Η διεύθυνση πρέπει να είναι %d bytes μεγάλη"
#: ports/espressif/common-hal/memorymap/AddressRange.c
#: ports/nrf/common-hal/memorymap/AddressRange.c
#: ports/raspberrypi/common-hal/memorymap/AddressRange.c
msgid "Address range not allowed"
msgstr ""
#: shared-bindings/memorymap/AddressRange.c
msgid "Address range wraps around"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
msgid "All CAN peripherals are in use"
msgstr "Όλα τα περιφεριακά CAN είναι σε χρήση"
#: ports/espressif/common-hal/busio/I2C.c
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
#: ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Όλα τα I2C περιφεριακά ειναι σε χρήση"
#: ports/espressif/common-hal/countio/Counter.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
msgid "All PCNT units in use"
msgstr "Όλες οι μονάδες PCNT είναι σε χρήση"
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "All RX FIFOs in use"
msgstr "Όλα τα RX FIFOs είναι σε χρήση"
#: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Όλα τα SPI περιφεριακά είναι σε χρήση"
#: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "All UART peripherals are in use"
msgstr "Όλα τα UART περιφεριακά ειναι σε χρήση"
#: ports/nrf/common-hal/countio/Counter.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c
#: shared-bindings/pwmio/PWMOut.c
msgid "All channels in use"
msgstr "Όλα τα κανάλια είναι σε χρήση"
#: ports/raspberrypi/common-hal/usb_host/Port.c
msgid "All dma channels in use"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Όλα τα κανάλια συμβάντων είναι σε χρήση"
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/usb_host/Port.c
msgid "All state machines in use"
msgstr "Όλες οι μηχανές κατάστασης είναι σε χρήση"
#: ports/atmel-samd/audio_dma.c
msgid "All sync event channels in use"
msgstr "Όλα τα κανάλια συμβάντων συγχρονισμού είναι σε χρήση"
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c
#: shared-bindings/pwmio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Όλοι οι χρονιστές για αυτό το pin χρησιμοποιούνται ήδη"
#: ports/atmel-samd/common-hal/_pew/PewPew.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
#: ports/espressif/common-hal/frequencyio/FrequencyIn.c
#: ports/espressif/common-hal/neopixel_write/__init__.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: ports/espressif/common-hal/pulseio/PulseOut.c
#: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c
#: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
#: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c
msgid "All timers in use"
msgstr "Όλοι οι χρονιστές βρίσκονται σε χρήση"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Already advertising."
msgstr "Ήδη διαφημίζουμε."
#: ports/atmel-samd/common-hal/canio/Listener.c
msgid "Already have all-matches listener"
msgstr "Ύπάρχει ήδη all-matches ακροατής"
#: ports/espressif/bindings/espnow/ESPNow.c
#: ports/espressif/common-hal/espulp/ULP.c
#: shared-module/memorymonitor/AllocationAlarm.c
#: shared-module/memorymonitor/AllocationSize.c
msgid "Already running"
msgstr "Τρέχει ήδη"
#: ports/espressif/common-hal/wifi/Radio.c
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Already scanning for wifi networks"
msgstr "Ήδη γίνεται σάρωση για δίκτυα wifi"
#: shared-module/os/getenv.c
#, c-format
msgid "An error occurred while retrieving '%s':\n"
msgstr ""
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Another PWMAudioOut is already active"
msgstr "Και άλλο PWMAudioOut είναι σε χρήση"
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/cxd56/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Άλλη αποστολή είναι ήδη ενεργή"
#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr "H παράταξη πρέπει να περιέχει halfwords (τύπου 'H')"
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
#: shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Η τιμές της παράταξη πρέπει να είναι μονά bytes."
#: shared-module/memorymonitor/AllocationAlarm.c
#, c-format
msgid "Attempt to allocate %d blocks"
msgstr "Προσπάθεια να δεσμευτούν %d blocks"
#: ports/raspberrypi/audio_dma.c
msgid "Audio conversion not implemented"
msgstr "Η μετατροπή ήχου δεν υποστηρίζεται"
#: shared-bindings/wifi/Radio.c
msgid "AuthMode.OPEN is not used with password"
msgstr "AuthMode.OPEN δεν μπορεί να χρησιμοποιηθεί με κωδικό"
#: shared-bindings/wifi/Radio.c supervisor/shared/web_workflow/web_workflow.c
msgid "Authentication failure"
msgstr "Αποτυχία αυθεντικοποίησης"
#: main.c
msgid "Auto-reload is off.\n"
msgstr "Η αυτόματη επαναφόρτωση είναι απενεργοποιημένη.\n"
#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Η αυτόματη επαναφόρτωση είναι ενεργή. Αποθηκεύστε αρχεία μέσω USB για να "
"τρέξετε ή ανοίξτε το REPL για απενεργοποίηση.\n"
#: ports/espressif/common-hal/canio/CAN.c
msgid "Baudrate not supported by peripheral"
msgstr "Baudrate δεν υποστηρίζεται από την περιφεριακή συσκευή"
#: shared-module/busdisplay/BusDisplay.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Below minimum frame rate"
msgstr "Χαμηλότερο από το ελάχιστο frame rate"
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must be sequential GPIO pins"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr "Ρολόι bit και word select πρέπει να μοιράζονται μια μονάδα ρολογιού"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "Βάθος bit πρέπει να είναι πολλαπλάσιο του 8."
#: shared-bindings/bitmaptools/__init__.c
msgid "Bitmap size and bits per value must match"
msgstr "Το μέγεθος του bitmap και τα bits ανα τιμή πρέπει να ταιριάζουν"
#: supervisor/shared/safe_mode.c
msgid "Boot device must be first (interface #0)."
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Both RX and TX required for flow control"
msgstr "Και RX και TX απαιτούνται για έλεγχο flow"
#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Και τα δύο pin πρέπει να υποστηρίζουν interrupts υλικού"
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Brightness not adjustable"
msgstr "H φωτεινότητα δεν μπορεί να προσαρμοστεί"
#: shared-bindings/_bleio/UUID.c
#, c-format
msgid "Buffer + offset too small %d %d %d"
msgstr "Buffer + offset είναι πολύ μικρά %d %d %d"
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Buffer elements must be 4 bytes long or less"
msgstr "Στοιχεία του buffer πρέπει να είναι το πολύ 4 bytes"
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Buffer is not a bytearray."
msgstr "Το buffer δεν είναι ένα bytearray."
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
#, c-format
msgid "Buffer length %d too big. It must be less than %d"
msgstr "Το μήκος buffer %d είναι πολύ μεγάλο. Πρέπει ν α είναι λιγότερο απο %d"
#: ports/atmel-samd/common-hal/sdioio/SDCard.c
#: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c
msgid "Buffer length must be a multiple of 512"
msgstr "Το μήκος buffer πρέπει να είναι πολλαπλάσιο του 512"
#: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c
msgid "Buffer must be a multiple of 512 bytes"
msgstr "Buffer πρέπει να είναι πολλαπλάσιο των 512 bytes"
#: shared-bindings/_bleio/PacketBuffer.c
#, c-format
msgid "Buffer too short by %d bytes"
msgstr "Buffer πολύ μικρό κατα %d bytes"
#: ports/cxd56/common-hal/camera/Camera.c
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-bindings/struct/__init__.c shared-module/struct/__init__.c
msgid "Buffer too small"
msgstr ""
#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "Buffers must be same size"
msgstr "Τα Buffers πρέπει να είναι του ιδίου μεγέθους"
#: ports/atmel-samd/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/raspberrypi/common-hal/paralleldisplaybus/ParallelBus.c
#, c-format
msgid "Bus pin %d is already in use"
msgstr "Bus pin %d είναι ήδη σε χρήση"
#: shared-bindings/_bleio/UUID.c
msgid "Byte buffer must be 16 bytes."
msgstr "Byte buffer πρέπει να είναι 16 bytes."
#: shared-bindings/aesio/aes.c
msgid "CBC blocks must be multiples of 16 bytes"
msgstr "CBC blocks πρέπει να είναι πολλαπλάσια του 16 bytes"
#: supervisor/shared/safe_mode.c
msgid "CIRCUITPY drive could not be found or created."
msgstr "Ο CIRCUITPY δίσκος δεν μπόρεσε να βρεθεί ή να δημιουργηθεί."
#: ports/espressif/common-hal/espidf/__init__.c
msgid "CRC or checksum was invalid"
msgstr "CRC ή checksum ήταν άκυρο"
#: py/objtype.c
msgid "Call super().__init__() before accessing native object."
msgstr "Κλήση super().__init__() πρίν την πρόσβαση του τοπικού αντικειμένου."
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Camera init"
msgstr "Εκκίνηση κάμερας"
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on RTC IO from deep sleep."
msgstr "Μόνο IO alarm ή RTC επιτρέπονται από βαθύ ύπνο."
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on one low pin while others alarm high from deep sleep."
msgstr ""
"Μόνο ένα alarm από low pin ενώ τα άλλα alarm θα είναι απο high σε βαθύ ύπνο."
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Can only alarm on two low pins from deep sleep."
msgstr "Μπορεί να γίνει alarm μόνο σε δύο low pins σε βαθύ ύπνο."
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "Can't set CCCD on local Characteristic"
msgstr "Δεν μπορεί να οριστεί CCCD σε τοπικό Characteristic"
#: shared-bindings/storage/__init__.c shared-bindings/usb_cdc/__init__.c
#: shared-bindings/usb_hid/__init__.c shared-bindings/usb_midi/__init__.c
msgid "Cannot change USB devices now"
msgstr "Δεν μπορούν να αλλάξουν οι USB συσκευές τώρα"
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot create a new Adapter; use _bleio.adapter;"
msgstr ""
"Δεν μπορεί να δημιουργηθεί νέο Adapter; χρησιμοποιείστε _bleio.adapter;"
#: shared-bindings/displayio/Bitmap.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "Δεν μπορούν να διαγραφούν οι τιμές"
#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
#: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "Δεν γίνεται να διαβαστεί το pull όσο είναι σε output mode"
#: ports/nrf/common-hal/microcontroller/Processor.c
msgid "Cannot get temperature"
msgstr "Δεν μπορεί να διαβαστεί η θερμοκρασία"
#: shared-bindings/_bleio/Adapter.c
msgid "Cannot have scan responses for extended, connectable advertisements."
msgstr ""
"Δεν μπορούμε να έχουμε απαντήσεις scan για εκτεταμένες, συνδεόμενες "
"διαφημήσεις."
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot pull on input-only pin."
msgstr "Δεν γίνεται pull σε pin μόνο για εισόδο."
#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "Δεν μπορεί να γίνει καταγραφή σε αρχείο"
#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when visible via USB."
msgstr "Δεν μπορεί να γίνει remount του '/' όταν είναι ορατό μέσω USB."
#: ports/atmel-samd/common-hal/microcontroller/__init__.c
#: ports/cxd56/common-hal/microcontroller/__init__.c
#: ports/mimxrt10xx/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present"
msgstr ""
"Δεν μπορεί να γίνει επανεκκίνηση στον bootloader διότι δεν υπάρχει "
"bootloader παρόν"
#: ports/espressif/common-hal/socketpool/Socket.c
msgid "Cannot set socket options"
msgstr "Δεν μπορεί να γίνει ρύθμιση των επιλογών του socket"
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "Δεν μπορεί να οριστεί τιμή οταν η κατεύθυνση είναι input."
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "Cannot specify RTS or CTS in RS485 mode"
msgstr "Δεν μπορεί να οριστεί RTS ή CTS σε RS485 mode"
#: py/objslice.c
msgid "Cannot subclass slice"
msgstr "Δεν γίνεται υποκατηγορία ενός slice"
#: shared-bindings/pwmio/PWMOut.c
msgid "Cannot vary frequency on a timer that is already in use"
msgstr ""
"Δεν μπορεί να γίνει δυναμική μεταβολή της συχνότητας σε έναν χρονιστή που "
"είναι ήδη σε χρήση"
#: ports/nrf/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge, only level"
msgstr "Δεν γίνεται αφύπνηση σε pin edge, αλλά μόνο σε level"
#: ports/espressif/common-hal/alarm/pin/PinAlarm.c
msgid "Cannot wake on pin edge. Only level."
msgstr "Δεν μπορεί να γίνει αφύπνηση σε pin edge. Μόνο level."
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr "Δεν υποστηρίζονται εγγραφές στο CharacteristicBuffer"
#: supervisor/shared/safe_mode.c
msgid "CircuitPython core code crashed hard. Whoops!\n"
msgstr "Ο πυρήνας της CircuitPython κατέρευσε. Οουπς!\n"
#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr "Stretch ρολογιού πολύ μεγάλο"
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Μονάδα ρολογιού ήδη σε χρήση"
#: shared-bindings/_bleio/Connection.c
msgid ""
"Connection has been disconnected and can no longer be used. Create a new "
"connection."
msgstr ""
"Έχει γίνει αποσύνδεση και αυτή η συνδεση δεν μπορεί να χρησιμοποιηθεί. "
"Δημιουργήστε μια νέα σύνδεση."
#: shared-bindings/bitmaptools/__init__.c
msgid "Coordinate arrays have different lengths"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "Coordinate arrays types have different sizes"
msgstr ""
#: ports/espressif/common-hal/neopixel_write/__init__.c
msgid "Could not retrieve clock"
msgstr "Δεν μπόρεσε να ανακληθεί το ρολόι"
#: shared-bindings/_bleio/Adapter.c
msgid "Could not set address"
msgstr "Δεν μπόρεσε να ρυθμιστεί η διεύθυνση"
#: shared-bindings/pwmio/PWMOut.c
msgid "Could not start PWM"
msgstr "Δεν μπόρεσε να ξεκινήσει το PWM"
#: ports/stm/common-hal/busio/UART.c
msgid "Could not start interrupt, RX busy"
msgstr "Δεν μπόρεσε να εκκινηθεί το interrupt, RX κατειλημμένο"
#: shared-module/audiomp3/MP3Decoder.c
msgid "Couldn't allocate decoder"
msgstr "Δεν μπόρεσε να δεσμευτεί decoder"
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Channel Init Error"
msgstr "Σφάλμα εκκίνησης καναλιού DAC"
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "DAC Device Init Error"
msgstr "Σφάλμα εκκίνησης συσκευής DAC"
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC είναι ήδη σε χρήση"
#: ports/atmel-samd/common-hal/paralleldisplaybus/ParallelBus.c
#: ports/nrf/common-hal/paralleldisplaybus/ParallelBus.c
msgid "Data 0 pin must be byte aligned"
msgstr "Το Data 0 pin πρέπει να είναι byte aligned"
#: shared-module/audiocore/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr "Το data chunk πρέπει να ακολουθεί το fmt chunk"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data not supported with directed advertising"
msgstr "Δεν υποστηρίζονται δεδομένα με κατευθυνόμενη διαφήμιση"
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Data too large for advertisement packet"
msgstr "Τα δεδομένα είναι πολύ μεγάλα για πακέτο διαφημίσεων"
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Deep sleep pins must use a rising edge with pulldown"
msgstr "Τα pins βαθύ ύπνου πρέπει να χρησιμοποιούν rising edge με pulldown"
#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr ""
#: ports/nrf/common-hal/audiobusio/I2SOut.c
msgid "Device in use"
msgstr ""
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display must have a 16 bit colorspace."
msgstr ""
#: shared-bindings/busdisplay/BusDisplay.c
#: shared-bindings/epaperdisplay/EPaperDisplay.c
#: shared-bindings/framebufferio/FramebufferDisplay.c
msgid "Display rotation must be in 90 degree increments"
msgstr ""
#: main.c
msgid "Done"
msgstr ""
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr ""
#: py/obj.c
msgid "During handling of the above exception, another exception occurred:"
msgstr ""
#: shared-bindings/aesio/aes.c
msgid "ECB only operates on 16 bytes at a time"
msgstr ""
#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/canio/CAN.c
msgid "ESP-IDF memory allocation failed"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/ps2io/Ps2.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr ""
#: extmod/modre.c
msgid "Error in regex"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Error in safemode.py."
msgstr ""
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "Error: Failure to bind"
msgstr ""
#: shared-bindings/alarm/__init__.c
msgid "Expected a kind of %q"
msgstr ""
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Extended advertisements with scan response not supported."
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "FFT is implemented for linear arrays only"
msgstr ""
#: ports/espressif/common-hal/ssl/SSLSocket.c
msgid "Failed SSL handshake"
msgstr ""
#: shared-bindings/ps2io/Ps2.c
msgid "Failed sending command."
msgstr ""
#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr ""
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Failed to add service TXT record"
msgstr ""
#: shared-bindings/mdns/Server.c
msgid ""
"Failed to add service TXT record; non-string or bytes found in txt_records"
msgstr ""
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "Failed to allocate %q buffer"
msgstr ""
#: ports/espressif/common-hal/wifi/__init__.c
msgid "Failed to allocate Wifi memory"
msgstr ""
#: ports/espressif/common-hal/wifi/ScannedNetworks.c
msgid "Failed to allocate wifi scan memory"
msgstr ""
#: ports/stm/common-hal/audiopwmio/PWMAudioOut.c
msgid "Failed to buffer the sample"
msgstr ""
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: internal error"
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Failed to connect: timeout"
msgstr ""
#: shared-module/audiomp3/MP3Decoder.c
msgid "Failed to parse MP3 file"
msgstr ""
#: ports/nrf/sd_mutex.c
#, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Failed to write internal flash."
msgstr ""
#: py/moderrno.c
msgid "File exists"
msgstr ""
#: shared-module/os/getenv.c
msgid "File not found"
msgstr ""
#: ports/atmel-samd/common-hal/canio/Listener.c
#: ports/espressif/common-hal/canio/Listener.c
#: ports/stm/common-hal/canio/Listener.c
msgid "Filters too complex"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is duplicate"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is invalid"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Firmware is too big"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "For L8 colorspace, input bitmap must have 8 bits per pixel"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "For RGB colorspaces, input bitmap must have 16 bits per pixel"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Format not supported"
msgstr ""
#: ports/mimxrt10xx/common-hal/microcontroller/Processor.c
msgid ""
"Frequency must be 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 or 1008 Mhz"
msgstr ""
#: shared-bindings/pwmio/PWMOut.c
msgid "Frequency must match existing PWMOut using this timer"
msgstr ""
#: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c
#: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c
msgid "Function requires lock"
msgstr ""
#: ports/cxd56/common-hal/gnss/GNSS.c
msgid "GNSS init"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Generic Failure"
msgstr ""
#: shared-bindings/framebufferio/FramebufferDisplay.c
#: shared-module/busdisplay/BusDisplay.c
#: shared-module/framebufferio/FramebufferDisplay.c
msgid "Group already used"
msgstr ""
#: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "Half duplex SPI is not implemented"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Hard fault: memory access or instruction error."
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/I2C.c
#: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/busio/UART.c
#: ports/stm/common-hal/canio/CAN.c ports/stm/common-hal/sdioio/SDCard.c
msgid "Hardware in use, try alternative pins"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Heap allocation when VM not running."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid ""
"Heap was corrupted because the stack was too small. Increase stack size."
msgstr ""
#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr ""
#: ports/stm/common-hal/busio/I2C.c
msgid "I2C init error"
msgstr ""
#: ports/raspberrypi/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
msgid "I2C peripheral in use"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "In-buffer elements must be <= 4 bytes long"
msgstr ""
#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Init program size invalid"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin direction conflicts with initial out pin direction"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Initial set pin state conflicts with initial out pin state"
msgstr ""
#: shared-bindings/bitops/__init__.c
#, c-format
msgid "Input buffer length (%d) must be a multiple of the strand count (%d)"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "Input taking too long"
msgstr ""
#: ports/espressif/common-hal/neopixel_write/__init__.c py/moderrno.c
msgid "Input/output error"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient authentication"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Insufficient encryption"
msgstr ""
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Interface must be started"
msgstr ""
#: ports/atmel-samd/audio_dma.c ports/raspberrypi/audio_dma.c
msgid "Internal audio buffer too small"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "Internal define error"
msgstr ""
#: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
#: shared-module/os/getenv.c
msgid "Internal error"
msgstr ""
#: shared-module/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Internal error #%d"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Internal watchdog timer expired."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Interrupt error."
msgstr ""
#: ports/mimxrt10xx/common-hal/audiobusio/__init__.c
#: ports/mimxrt10xx/common-hal/pwmio/PWMOut.c
#: ports/raspberrypi/bindings/picodvi/Framebuffer.c
#: ports/raspberrypi/common-hal/picodvi/Framebuffer.c py/argcheck.c
#: shared-bindings/digitalio/DigitalInOut.c
#: shared-bindings/epaperdisplay/EPaperDisplay.c
msgid "Invalid %q"
msgstr ""
#: ports/atmel-samd/common-hal/microcontroller/Pin.c
#: ports/espressif/common-hal/dotclockframebuffer/DotClockFramebuffer.c
#: ports/mimxrt10xx/common-hal/microcontroller/Pin.c
#: shared-bindings/microcontroller/Pin.c
msgid "Invalid %q pin"
msgstr ""
#: ports/stm/common-hal/analogio/AnalogIn.c
msgid "Invalid ADC Unit value"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Invalid BLE parameter"
msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "Invalid BSSID"
msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "Invalid MAC address"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c py/moderrno.c
msgid "Invalid argument"
msgstr ""
#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr ""
#: shared-module/os/getenv.c
#, c-format
msgid "Invalid byte %.*s"
msgstr ""
#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "Invalid data_pins[%d]"
msgstr ""
#: shared-module/msgpack/__init__.c
msgid "Invalid format"
msgstr ""
#: shared-module/audiocore/WaveFile.c
msgid "Invalid format chunk size"
msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "Invalid hex password"
msgstr ""
#: ports/espressif/common-hal/wifi/Radio.c
msgid "Invalid multicast MAC address"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Invalid size"
msgstr ""
#: ports/espressif/common-hal/ssl/SSLContext.c
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "Invalid socket for TLS"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Invalid state"
msgstr ""
#: shared-module/os/getenv.c
msgid "Invalid unicode escape"
msgstr ""
#: shared-bindings/aesio/aes.c
msgid "Key must be 16, 24, or 32 bytes long"
msgstr ""
#: shared-module/os/getenv.c
msgid "Key not found"
msgstr ""
#: shared-module/is31fl3741/FrameBuffer.c
msgid "LED mappings must match display size"
msgstr ""
#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr ""
#: shared-module/displayio/Group.c
msgid "Layer already in a group"
msgstr ""
#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "MAC address was invalid"
msgstr ""
#: shared-bindings/is31fl3741/IS31FL3741.c
msgid "Mapping must be a tuple"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched data size"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Mismatched swap flag"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing first_in_pin. %q[%u] reads pin(s)"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing first_in_pin. %q[%u] shifts in from pin(s)"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing first_in_pin. %q[%u] waits based on pin"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing first_out_pin. %q[%u] shifts out to pin(s)"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing first_out_pin. %q[%u] writes pin(s)"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing first_set_pin. %q[%u] sets pin(s)"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Missing jmp_pin. %q[%u] jumps on pin"
msgstr ""
#: shared-bindings/busio/UART.c shared-bindings/displayio/Group.c
msgid "Must be a %q subclass."
msgstr ""
#: ports/espressif/common-hal/dotclockframebuffer/DotClockFramebuffer.c
msgid "Must provide 5/6/5 RGB pins"
msgstr ""
#: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c
msgid "Must provide MISO or MOSI pin"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "Must use a multiple of 6 rgb pins, not %d"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "NLR jump failed. Likely memory corruption."
msgstr ""
#: ports/espressif/common-hal/nvm/ByteArray.c
msgid "NVS Error"
msgstr ""
#: shared-bindings/socketpool/SocketPool.c
msgid "Name or service not known"
msgstr ""
#: py/qstr.c
msgid "Name too long"
msgstr ""
#: shared-bindings/displayio/TileGrid.c
msgid "New bitmap must be same size as old bitmap"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
msgid "Nimble out of memory"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/espressif/common-hal/busio/SPI.c
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/SPI.c
#: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
#: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/SPI.c
#: ports/stm/common-hal/busio/UART.c shared-bindings/fourwire/FourWire.c
#: shared-bindings/i2cdisplaybus/I2CDisplayBus.c
#: shared-bindings/paralleldisplaybus/ParallelBus.c
#: shared-module/bitbangio/SPI.c
msgid "No %q pin"
msgstr ""
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
msgid "No CCCD for this Characteristic"
msgstr ""
#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
#: ports/stm/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA channel found"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "No DMA pacing timer found"
msgstr ""
#: shared-module/adafruit_bus_device/i2c_device/I2CDevice.c
#, c-format
msgid "No I2C device at address: 0x%x"
msgstr ""
#: supervisor/shared/web_workflow/web_workflow.c
msgid "No IP"
msgstr ""
#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr ""
#: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c
msgid "No capture in progress"
msgstr ""
#: shared-module/usb/core/Device.c
msgid "No configuration set"
msgstr ""
#: shared-bindings/_bleio/PacketBuffer.c
msgid "No connection: length cannot be determined"
msgstr ""
#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr ""
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr ""
#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in in program"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No in or out in program"
msgstr ""
#: py/objint.c shared-bindings/time/__init__.c
msgid "No long integer support"
msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "No network with that ssid"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "No out in program"
msgstr ""
#: ports/atmel-samd/common-hal/busio/I2C.c
#: ports/espressif/common-hal/busio/I2C.c
#: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
#: ports/raspberrypi/common-hal/busio/I2C.c
msgid "No pull up found on SDA or SCL; check your wiring"
msgstr ""
#: shared-module/touchio/TouchIn.c
msgid "No pulldown on pin; 1Mohm recommended"
msgstr ""
#: py/moderrno.c
msgid "No space left on device"
msgstr ""
#: py/moderrno.c
msgid "No such device"
msgstr ""
#: py/moderrno.c
msgid "No such file/directory"
msgstr ""
#: shared-module/rgbmatrix/RGBMatrix.c
msgid "No timer available"
msgstr ""
#: shared-module/usb/core/Device.c
msgid "No usb host port initialized"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid "Nordic system firmware out of memory"
msgstr ""
#: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c
msgid "Not a valid IP string"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#: ports/nrf/common-hal/_bleio/__init__.c
#: shared-bindings/_bleio/CharacteristicBuffer.c
msgid "Not connected"
msgstr ""
#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
#: shared-bindings/audiopwmio/PWMAudioOut.c
msgid "Not playing"
msgstr ""
#: ports/espressif/common-hal/paralleldisplaybus/ParallelBus.c
#, c-format
msgid "Number of data_pins must be 8 or 16, not %d"
msgstr ""
#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Off"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Ok"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
#, c-format
msgid "Only 8 or 16 bit mono with %dx oversampling supported."
msgstr ""
#: ports/espressif/common-hal/wifi/__init__.c
#: ports/raspberrypi/common-hal/wifi/__init__.c
msgid "Only IPv4 addresses supported"
msgstr ""
#: ports/espressif/common-hal/socketpool/Socket.c
#: ports/raspberrypi/common-hal/socketpool/Socket.c
msgid "Only IPv4 sockets supported"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "Only connectable advertisements can be directed"
msgstr ""
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Only edge detection is available on this hardware"
msgstr ""
#: shared-bindings/ipaddress/__init__.c
msgid "Only int or string supported for ip"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: "
"%d bpp given"
msgstr ""
#: ports/espressif/common-hal/alarm/touch/TouchAlarm.c
msgid "Only one %q can be set in deep sleep."
msgstr ""
#: ports/espressif/common-hal/espulp/ULPAlarm.c
msgid "Only one %q can be set."
msgstr ""
#: ports/espressif/common-hal/i2ctarget/I2CTarget.c
#: ports/raspberrypi/common-hal/i2ctarget/I2CTarget.c
msgid "Only one address is allowed"
msgstr ""
#: ports/atmel-samd/common-hal/alarm/time/TimeAlarm.c
#: ports/nrf/common-hal/alarm/time/TimeAlarm.c
#: ports/stm/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set"
msgstr ""
#: ports/espressif/common-hal/alarm/time/TimeAlarm.c
#: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c
msgid "Only one alarm.time alarm can be set."
msgstr ""
#: shared-module/displayio/ColorConverter.c
msgid "Only one color can be transparent at a time"
msgstr ""
#: py/moderrno.c
msgid "Operation not permitted"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Operation or feature not supported"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Operation timed out"
msgstr ""
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Out of MDNS service slots"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Out of memory"
msgstr ""
#: ports/espressif/common-hal/socketpool/Socket.c
#: ports/raspberrypi/common-hal/socketpool/Socket.c
msgid "Out of sockets"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Out-buffer elements must be <= 4 bytes long"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr ""
#: shared-bindings/pwmio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "PWM restart"
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice already in use"
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "PWM slice channel A already in use"
msgstr ""
#: ports/espressif/common-hal/audiobusio/__init__.c
msgid "Peripheral in use"
msgstr ""
#: py/moderrno.c
msgid "Permission denied"
msgstr ""
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
msgid "Pin cannot wake from Deep Sleep"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Pin count too large"
msgstr ""
#: ports/stm/common-hal/alarm/pin/PinAlarm.c
#: ports/stm/common-hal/pulseio/PulseIn.c
msgid "Pin interrupt already in use"
msgstr ""
#: shared-bindings/adafruit_bus_device/spi_device/SPIDevice.c
msgid "Pin is input only"
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "Pin must be on PWM Channel B"
msgstr ""
#: ports/atmel-samd/common-hal/countio/Counter.c
msgid "Pin must support hardware interrupts"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid ""
"Pinout uses %d bytes per element, which consumes more than the ideal %d "
"bytes. If this cannot be avoided, pass allow_inefficient=True to the "
"constructor"
msgstr ""
#: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c
msgid "Pins must be sequential"
msgstr ""
#: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c
msgid "Pins must be sequential GPIO pins"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Pins must share PWM slice"
msgstr ""
#: shared-module/usb/core/Device.c
msgid "Pipe error"
msgstr ""
#: py/builtinhelp.c
msgid "Plus any modules on the filesystem\n"
msgstr ""
#: shared-module/vectorio/Polygon.c
msgid "Polygon needs at least 3 points"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Power dipped. Make sure you are providing enough power."
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "Prefix buffer must be on the heap"
msgstr ""
#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n"
msgstr ""
"Πατήστε οποιοδήποτε πλήκτρο για να μπείτε στο REPL. Πατήστε CTRL-D για "
"επαναφόρτωση.\n"
#: main.c
msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n"
msgstr "Προσποίηση βαθύ ύπνου μεχρι γεγονότος, CTRL-C ή εγγραφή αρχείου.\n"
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does IN without loading ISR"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "Program does OUT without loading OSR"
msgstr ""
#: ports/raspberrypi/bindings/rp2pio/StateMachine.c
msgid "Program size invalid"
msgstr ""
#: ports/espressif/common-hal/espulp/ULP.c
msgid "Program too long"
msgstr ""
#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr ""
#: ports/raspberrypi/common-hal/countio/Counter.c
msgid "RISE_AND_FALL not available on this chip"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG DeInit Error"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "RNG Init Error"
msgstr ""
#: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c
#: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c
msgid "RS485"
msgstr ""
#: ports/espressif/common-hal/busio/UART.c
#: ports/mimxrt10xx/common-hal/busio/UART.c
msgid "RS485 inversion specified when not in RS485 mode"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr ""
#: ports/stm/common-hal/os/__init__.c
msgid "Random number generation error"
msgstr ""
#: shared-bindings/_bleio/__init__.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c shared-module/bitmaptools/__init__.c
#: shared-module/displayio/Bitmap.c
msgid "Read-only"
msgstr ""
#: extmod/vfs_fat.c py/moderrno.c
msgid "Read-only filesystem"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Received response was invalid"
msgstr ""
#: supervisor/shared/bluetooth/bluetooth.c
msgid "Reconnecting"
msgstr ""
#: shared-bindings/epaperdisplay/EPaperDisplay.c
msgid "Refresh too soon"
msgstr ""
#: shared-bindings/canio/RemoteTransmissionRequest.c
msgid "RemoteTransmissionRequests limited to 8 bytes"
msgstr ""
#: shared-bindings/aesio/aes.c
msgid "Requested AES mode is unsupported"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Requested resource not found"
msgstr ""
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr ""
#: main.c
msgid "Running in safe mode! Not running saved code.\n"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "SD card CSD format not supported"
msgstr ""
#: ports/cxd56/common-hal/sdioio/SDCard.c
msgid "SDCard init"
msgstr ""
#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO GetCardInfo Error %d"
msgstr ""
#: ports/stm/common-hal/sdioio/SDCard.c
#, c-format
msgid "SDIO Init Error %d"
msgstr ""
#: ports/espressif/common-hal/busio/SPI.c
msgid "SPI configuration failed"
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "SPI init error"
msgstr ""
#: ports/raspberrypi/common-hal/busio/SPI.c
msgid "SPI peripheral in use"
msgstr ""
#: ports/stm/common-hal/busio/SPI.c
msgid "SPI re-init"
msgstr ""
#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "Scale dimensions must divide by 3"
msgstr ""
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "Scan already in progress. Stop with stop_scan."
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr ""
#: shared-bindings/ssl/SSLContext.c
msgid "Server side context cannot have hostname"
msgstr ""
#: ports/cxd56/common-hal/camera/Camera.c
msgid "Size not supported"
msgstr ""
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
#: shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr ""
#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c
#: shared-bindings/displayio/TileGrid.c
#: shared-bindings/memorymonitor/AllocationSize.c
#: shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr ""
#: ports/espressif/common-hal/socketpool/SocketPool.c
#: ports/raspberrypi/common-hal/socketpool/SocketPool.c
msgid "SocketPool can only be used with wifi.radio"
msgstr ""
#: shared-bindings/aesio/aes.c
msgid "Source and destination buffers must be the same length"
msgstr ""
#: shared-bindings/paralleldisplaybus/ParallelBus.c
msgid "Specify exactly one of data0 or data_pins"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo left must be on PWM channel A"
msgstr ""
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Stereo right must be on PWM channel B"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Supply one of monotonic_time or epoch_time"
msgstr ""
#: shared-bindings/gnss/GNSS.c
msgid "System entry must be gnss.SatelliteSystem"
msgstr ""
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Temperature read timed out"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "The `microcontroller` module was used to boot into safe mode."
msgstr ""
#: py/obj.c
msgid "The above exception was the direct cause of the following exception:"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's channel count does not match the mixer's"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's sample rate does not match the mixer's"
msgstr ""
#: shared-module/audiomixer/MixerVoice.c
msgid "The sample's signedness does not match the mixer's"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Third-party firmware fatal error."
msgstr ""
#: shared-module/imagecapture/ParallelImageCapture.c
msgid "This microcontroller does not support continuous capture."
msgstr ""
#: shared-module/paralleldisplaybus/ParallelBus.c
msgid ""
"This microcontroller only supports data0=, not data_pins=, because it "
"requires contiguous pins."
msgstr ""
#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr ""
#: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c
msgid "Tile index out of bounds"
msgstr ""
#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "Time is in the past."
msgstr ""
#: ports/espressif/common-hal/_bleio/Adapter.c
#: ports/nrf/common-hal/_bleio/Adapter.c
#, c-format
msgid "Timeout is too long: Maximum timeout length is %d seconds"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample"
msgstr ""
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr ""
#: shared-module/displayio/__init__.c
msgid "Too many display busses; forgot displayio.release_displays() ?"
msgstr ""
#: shared-module/displayio/__init__.c
msgid "Too many displays"
msgstr ""
#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Total data to write is larger than %q"
msgstr ""
#: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c
#: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c
#: ports/stm/common-hal/alarm/touch/TouchAlarm.c
msgid "Touch alarms not available"
msgstr ""
#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART de-init"
msgstr ""
#: ports/cxd56/common-hal/busio/UART.c ports/espressif/common-hal/busio/UART.c
#: ports/stm/common-hal/busio/UART.c
msgid "UART init"
msgstr ""
#: ports/raspberrypi/common-hal/busio/UART.c
msgid "UART peripheral in use"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART re-init"
msgstr ""
#: ports/stm/common-hal/busio/UART.c
msgid "UART write"
msgstr ""
#: main.c
msgid "UID:"
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB busy"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "USB devices need more endpoints than are available."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "USB devices specify too many interface names."
msgstr ""
#: shared-module/usb_hid/Device.c
msgid "USB error"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID integer value must be 0-0xffff"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr ""
#: ports/raspberrypi/common-hal/memorymap/AddressRange.c
msgid "Unable to access unaligned IO register"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/raspberrypi/common-hal/audiobusio/I2SOut.c
#: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "Unable to allocate to the heap."
msgstr ""
#: ports/espressif/common-hal/busio/I2C.c
msgid "Unable to create lock"
msgstr ""
#: shared-module/i2cdisplaybus/I2CDisplayBus.c
#: shared-module/is31fl3741/IS31FL3741.c
#, c-format
msgid "Unable to find I2C Display at %x"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr ""
#: py/parse.c
msgid "Unable to init parser"
msgstr ""
#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "Unable to start mDNS query"
msgstr ""
#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr ""
#: ports/raspberrypi/common-hal/memorymap/AddressRange.c
msgid "Unable to write to read-only memory"
msgstr ""
#: shared-bindings/alarm/SleepMemory.c
msgid "Unable to write to sleep_memory."
msgstr ""
#: ports/nrf/common-hal/_bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr ""
#: ports/espressif/common-hal/ssl/SSLSocket.c
#, c-format
msgid "Unhandled ESP TLS error %d %d %x %d"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error at %s:%d: %d"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown BLE error: %d"
msgstr ""
#: ports/raspberrypi/common-hal/wifi/__init__.c
#, c-format
msgid "Unknown error code %d"
msgstr ""
#: shared-bindings/wifi/Radio.c
#, c-format
msgid "Unknown failure %d"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown gatt error: 0x%04x"
msgstr ""
#: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c
#: supervisor/shared/safe_mode.c
msgid "Unknown reason."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown security error: 0x%04x"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error at %s:%d: %d"
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %04x"
msgstr ""
#: ports/espressif/common-hal/_bleio/__init__.c
#, c-format
msgid "Unknown system firmware error: %d"
msgstr ""
#: shared-bindings/adafruit_pixelbuf/PixelBuf.c
#: shared-module/_pixelmap/PixelMap.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""
#: ports/nrf/common-hal/_bleio/__init__.c
msgid ""
"Unspecified issue. Can be that the pairing prompt on the other device was "
"declined or ignored."
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "Unsupported colorspace"
msgstr ""
#: shared-module/displayio/bus_core.c
msgid "Unsupported display bus type"
msgstr ""
#: shared-module/audiocore/WaveFile.c
msgid "Unsupported format"
msgstr ""
#: shared-bindings/hashlib/__init__.c
msgid "Unsupported hash algorithm"
msgstr ""
#: ports/espressif/common-hal/dualbank/__init__.c
msgid "Update Failed"
msgstr ""
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length != required fixed length"
msgstr ""
#: ports/espressif/common-hal/_bleio/Characteristic.c
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
msgid "Value length > max_length"
msgstr ""
#: ports/espressif/common-hal/espidf/__init__.c
msgid "Version was invalid"
msgstr ""
#: ports/stm/common-hal/microcontroller/Processor.c
msgid "Voltage read timed out"
msgstr ""
#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr ""
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET"
msgstr ""
#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Visit circuitpython.org for more information.\n"
"\n"
"To list built-in modules type `help(\"modules\")`.\n"
msgstr ""
#: supervisor/shared/web_workflow/web_workflow.c
msgid "Wi-Fi: "
msgstr ""
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "Wifi is not enabled"
msgstr ""
#: main.c
msgid "Woken up by alarm.\n"
msgstr ""
#: ports/espressif/common-hal/_bleio/PacketBuffer.c
#: ports/nrf/common-hal/_bleio/PacketBuffer.c
msgid "Writes not supported on Characteristic"
msgstr ""
#: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h
#: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h
#: ports/atmel-samd/boards/meowmeow/mpconfigboard.h
msgid "You pressed both buttons at start up."
msgstr ""
#: ports/espressif/boards/m5stack_core_basic/mpconfigboard.h
#: ports/espressif/boards/m5stack_core_fire/mpconfigboard.h
#: ports/espressif/boards/m5stack_stick_c/mpconfigboard.h
#: ports/espressif/boards/m5stack_stick_c_plus/mpconfigboard.h
msgid "You pressed button A at start up."
msgstr ""
#: ports/espressif/boards/m5stack_m5paper/mpconfigboard.h
msgid "You pressed button DOWN at start up."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You pressed the BOOT button at start up"
msgstr ""
#: ports/espressif/boards/adafruit_huzzah32_breakout/mpconfigboard.h
msgid "You pressed the GPIO0 button at start up."
msgstr ""
#: ports/espressif/boards/espressif_esp32_lyrat/mpconfigboard.h
msgid "You pressed the Rec button at start up."
msgstr ""
#: ports/espressif/boards/adafruit_feather_esp32_v2/mpconfigboard.h
msgid "You pressed the SW38 button at start up."
msgstr ""
#: ports/espressif/boards/hardkernel_odroid_go/mpconfigboard.h
msgid "You pressed the VOLUME button at start up."
msgstr ""
#: ports/espressif/boards/m5stack_atom_echo/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_lite/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_matrix/mpconfigboard.h
#: ports/espressif/boards/m5stack_atom_u/mpconfigboard.h
msgid "You pressed the central button at start up."
msgstr ""
#: ports/nrf/boards/aramcon2_badge/mpconfigboard.h
msgid "You pressed the left button at start up."
msgstr ""
#: supervisor/shared/safe_mode.c
msgid "You pressed the reset button during boot."
msgstr ""
#: supervisor/shared/micropython.c
msgid "[truncated due to length]"
msgstr ""
#: py/objtype.c
msgid "__init__() should return None"
msgstr ""
#: py/objtype.c
#, c-format
msgid "__init__() should return None, not '%s'"
msgstr ""
#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr ""
#: extmod/modbinascii.c extmod/modhashlib.c py/objarray.c
msgid "a bytes-like object is required"
msgstr ""
#: shared-bindings/i2ctarget/I2CTarget.c
msgid "addresses is empty"
msgstr ""
#: py/compile.c
msgid "annotation must be an identifier"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "arange: cannot compute length"
msgstr ""
#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr ""
#: py/objobject.c
msgid "arg must be user-type"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "argsort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "argsort is not implemented for flattened arrays"
msgstr ""
#: py/runtime.c shared-bindings/supervisor/__init__.c
msgid "argument has wrong type"
msgstr ""
#: py/compile.c
msgid "argument name reused"
msgstr ""
#: py/argcheck.c shared-bindings/_stage/__init__.c
#: shared-bindings/digitalio/DigitalInOut.c
msgid "argument num/types mismatch"
msgstr ""
#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/numpy/transform.c
msgid "arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array and index length must be equal"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "array has too many dimensions"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "array is too big"
msgstr ""
#: py/objarray.c shared-bindings/alarm/SleepMemory.c
#: shared-bindings/memorymap/AddressRange.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr ""
#: py/asmxtensa.c
msgid "asm overflow"
msgstr ""
#: py/compile.c
msgid "async for/with outside async function"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get (arg)min/(arg)max of empty sequence"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "attempt to get argmin/argmax of an empty sequence"
msgstr ""
#: py/objstr.c
msgid "attributes not supported"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "axis is out of bounds"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
msgid "axis must be None, or an integer"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "axis too long"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "background value out of range of target"
msgstr ""
#: py/builtinevex.c
msgid "bad compile mode"
msgstr ""
#: py/objstr.c
msgid "bad conversion specifier"
msgstr ""
#: py/objstr.c
msgid "bad format string"
msgstr ""
#: py/binary.c py/objarray.c
msgid "bad typecode"
msgstr ""
#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "bitmap sizes must match"
msgstr ""
#: extmod/modrandom.c
msgid "bits must be 32 or less"
msgstr ""
#: shared-bindings/audiomixer/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr ""
#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr ""
#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer is smaller than requested size"
msgstr ""
#: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c
msgid "buffer size must be a multiple of element size"
msgstr ""
#: shared-module/struct/__init__.c
msgid "buffer size must match format"
msgstr ""
#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr ""
#: py/modstruct.c shared-module/struct/__init__.c
msgid "buffer too small"
msgstr ""
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "buffer too small for requested bytes"
msgstr ""
#: py/emitbc.c
msgid "bytecode overflow"
msgstr ""
#: py/objarray.c
msgid "bytes length not a multiple of item size"
msgstr ""
#: py/objstr.c
msgid "bytes value out of range"
msgstr ""
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is out of range"
msgstr ""
#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr ""
#: shared-module/vectorio/Circle.c shared-module/vectorio/Polygon.c
#: shared-module/vectorio/Rectangle.c
msgid "can only have one parent"
msgstr ""
#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr ""
#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "can only specify one unknown dimension"
msgstr ""
#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr ""
#: py/compile.c
msgid "can't assign to expression"
msgstr ""
#: extmod/modasyncio.c
msgid "can't cancel self"
msgstr ""
#: shared-module/adafruit_pixelbuf/PixelBuf.c
msgid "can't convert %q to %q"
msgstr ""
#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr ""
#: py/obj.c
#, c-format
msgid "can't convert %s to float"
msgstr ""
#: py/runtime.c
#, c-format
msgid "can't convert %s to int"
msgstr ""
#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr ""
#: py/objint.c
msgid "can't convert NaN to int"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "can't convert complex to float"
msgstr ""
#: py/objint.c
msgid "can't convert inf to int"
msgstr ""
#: py/obj.c
msgid "can't convert to complex"
msgstr ""
#: py/obj.c
msgid "can't convert to float"
msgstr ""
#: py/runtime.c
msgid "can't convert to int"
msgstr ""
#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr ""
#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr ""
#: py/compile.c
msgid "can't delete expression"
msgstr ""
#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr ""
#: py/runtime.c
msgid "can't import name %q"
msgstr ""
#: py/emitnative.c
msgid "can't load from '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr ""
#: py/builtinimport.c
msgid "can't perform relative import"
msgstr ""
#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "can't set 512 block size"
msgstr ""
#: py/objexcept.c py/objnamedtuple.c
msgid "can't set attribute"
msgstr ""
#: py/runtime.c
msgid "can't set attribute '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store to '%q'"
msgstr ""
#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr ""
#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""
#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
#: py/objcomplex.c
msgid "can't truncate-divide a complex number"
msgstr ""
#: extmod/moductypes.c
msgid "can't unambiguously get sizeof scalar"
msgstr ""
#: extmod/modasyncio.c
msgid "can't wait"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot assign new shape"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "cannot cast output with casting rule"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex to dtype"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot convert complex type"
msgstr ""
#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr ""
#: py/objtype.c
msgid "cannot create instance"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot delete array elements"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "cannot reshape array"
msgstr ""
#: py/emitnative.c
msgid "casting"
msgstr ""
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "channel re-init"
msgstr ""
#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr ""
#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr ""
#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "clip point must be (x,y) tuple"
msgstr ""
#: shared-bindings/msgpack/ExtType.c
msgid "code outside range 0~127"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer, tuple, list, or int"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr ""
#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr ""
#: py/emitnative.c
msgid "comparison of int and uint"
msgstr ""
#: py/objcomplex.c
msgid "complex divide by zero"
msgstr ""
#: py/objfloat.c py/parsenum.c
msgid "complex values not supported"
msgstr ""
#: extmod/modzlib.c
msgid "compression header"
msgstr ""
#: py/emitnative.c
msgid "conversion to object"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be linear arrays"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/numpy/filter.c
msgid "convolve arguments must not be empty"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "corrupted file"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "could not invert Vandermonde matrix"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "couldn't determine SD card version"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "cross is defined for 1D arrays of length 3"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be iterable"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "data must be of equal length"
msgstr ""
#: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c
#, c-format
msgid "data pin #%d in use"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "data type not understood"
msgstr ""
#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr ""
#: py/compile.c
msgid "default 'except' must be last"
msgstr ""
#: shared-bindings/msgpack/__init__.c
msgid "default is not a function"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""
#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr ""
#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "diff argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "differentiation order out of range"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "dimensions do not match"
msgstr ""
#: py/emitnative.c
msgid "div/mod not implemented for uint"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "divide by zero"
msgstr ""
#: py/runtime.c
msgid "division by zero"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "dtype must be float, or complex"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "dtype of int32 is not supported"
msgstr ""
#: py/objdeque.c
msgid "empty"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "empty file"
msgstr ""
#: extmod/modasyncio.c extmod/modheapq.c
msgid "empty heap"
msgstr ""
#: py/objstr.c
msgid "empty separator"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr ""
#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr ""
#: shared-bindings/alarm/time/TimeAlarm.c
msgid "epoch_time not supported on this board"
msgstr ""
#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr ""
#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr ""
#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr ""
#: py/obj.c
msgid "expected tuple/list"
msgstr ""
#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr ""
#: py/compile.c
msgid "expecting an assembler instruction"
msgstr ""
#: py/compile.c
msgid "expecting just a value for set"
msgstr ""
#: py/compile.c
msgid "expecting key:value for dict"
msgstr ""
#: shared-bindings/msgpack/__init__.c
msgid "ext_hook is not a function"
msgstr ""
#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr ""
#: py/argcheck.c
msgid "extra positional arguments given"
msgstr ""
#: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c
#: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/gifio/OnDiskGif.c
#: shared-bindings/synthio/__init__.c shared-module/gifio/GifWriter.c
msgid "file must be a file opened in byte mode"
msgstr ""
#: shared-bindings/traceback/__init__.c
msgid "file write is not available"
msgstr ""
#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "first argument must be a callable"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "first argument must be a function"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "first argument must be a tuple of ndarrays"
msgstr ""
#: extmod/ulab/code/numpy/transform.c extmod/ulab/code/numpy/vector.c
msgid "first argument must be an ndarray"
msgstr ""
#: py/objtype.c
msgid "first argument to super() must be type"
msgstr ""
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "first two arguments must be ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "flattening order must be either 'C', or 'F'"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "flip argument must be an ndarray"
msgstr ""
#: py/objint.c
msgid "float too big"
msgstr ""
#: py/nativeglue.c
msgid "float unsupported"
msgstr ""
#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr ""
#: extmod/moddeflate.c
msgid "format"
msgstr ""
#: py/objstr.c
msgid "format requires a dict"
msgstr ""
#: py/objdeque.c
msgid "full"
msgstr ""
#: py/argcheck.c
msgid "function doesn't take keyword arguments"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr ""
#: py/bc.c py/objnamedtuple.c
msgid "function got multiple values for argument '%q'"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "function has the same sign at the ends of interval"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "function is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "function is implemented for ndarrays only"
msgstr ""
#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr ""
#: py/bc.c
msgid "function missing keyword-only argument"
msgstr ""
#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr ""
#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr ""
#: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr ""
#: py/objgenerator.c
msgid "generator already executing"
msgstr ""
#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr ""
#: py/objgenerator.c py/runtime.c
msgid "generator raised StopIteration"
msgstr ""
#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr ""
#: extmod/modhashlib.c
msgid "hash is final"
msgstr ""
#: extmod/modheapq.c
msgid "heap must be a list"
msgstr ""
#: py/compile.c
msgid "identifier redefined as global"
msgstr ""
#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr ""
#: py/compile.c
msgid "import * not at module level"
msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy arch"
msgstr ""
#: py/persistentcode.c
msgid "incompatible .mpy file"
msgstr ""
#: py/objstr.c
msgid "incomplete format"
msgstr ""
#: py/objstr.c
msgid "incomplete format key"
msgstr ""
#: extmod/modbinascii.c
msgid "incorrect padding"
msgstr ""
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c
msgid "index is out of bounds"
msgstr ""
#: shared-bindings/_pixelmap/PixelMap.c
msgid "index must be tuple or int"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c
#: ports/espressif/common-hal/pulseio/PulseIn.c
#: shared-bindings/bitmaptools/__init__.c
msgid "index out of range"
msgstr ""
#: py/obj.c
msgid "indices must be integers"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "indices must be integers, slices, or Boolean lists"
msgstr ""
#: ports/espressif/common-hal/busio/I2C.c
msgid "init I2C"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "initial values must be iterable"
msgstr ""
#: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c
msgid "initial_value length is wrong"
msgstr ""
#: py/compile.c
msgid "inline assembler must be a function"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "input and output dimensions differ"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "input and output shapes differ"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input argument must be an integer, a tuple, or a list"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "input array length must be power of 2"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input arrays are not compatible"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input data must be an iterable"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "input dtype must be float or complex"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input is not iterable"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "input matrix is asymmetric"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
#: extmod/ulab/code/scipy/linalg/linalg.c
msgid "input matrix is singular"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "input must be 1- or 2-d"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be a 1D ndarray"
msgstr ""
#: extmod/ulab/code/scipy/linalg/linalg.c extmod/ulab/code/user/user.c
msgid "input must be a dense ndarray"
msgstr ""
#: extmod/ulab/code/user/user.c
msgid "input must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray.c
msgid "input must be an ndarray, or a scalar"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "input must be one-dimensional"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "input must be square matrix"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "input must be tuple, list, range, or ndarray"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "input vectors must be of equal length"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "interp is defined for 1D iterables of equal length"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
#, c-format
msgid "interval must be in range %s-%s"
msgstr ""
#: py/compile.c
msgid "invalid arch"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid bits_per_pixel %d, must be, 1, 2, 4, 8, 16, 24, or 32"
msgstr ""
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "invalid cert"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element size %d for bits_per_pixel %d\n"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
#, c-format
msgid "invalid element_size %d, must be, 1, 2, or 4"
msgstr ""
#: shared-bindings/traceback/__init__.c
msgid "invalid exception"
msgstr ""
#: py/objstr.c
msgid "invalid format specifier"
msgstr ""
#: shared-bindings/wifi/Radio.c
msgid "invalid hostname"
msgstr ""
#: ports/raspberrypi/common-hal/ssl/SSLSocket.c
msgid "invalid key"
msgstr ""
#: py/compile.c
msgid "invalid micropython decorator"
msgstr ""
#: ports/espressif/common-hal/espcamera/Camera.c
msgid "invalid setting"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr ""
#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr ""
#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr ""
#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr ""
#: py/parsenum.c
msgid "invalid syntax for number"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr ""
#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "iterations did not converge"
msgstr ""
#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""
#: py/argcheck.c
msgid "keyword argument(s) not implemented - use normal args instead"
msgstr ""
#: py/emitinlinethumb.c py/emitinlinextensa.c
msgid "label '%q' not defined"
msgstr ""
#: py/compile.c
msgid "label redefined"
msgstr ""
#: shared-bindings/audiomixer/MixerVoice.c
msgid "level must be between 0 and 1"
msgstr ""
#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr ""
#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr ""
#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr ""
#: py/vm.c
msgid "local variable referenced before assignment"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
msgid "loopback + silent mode not supported by peripheral"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "mDNS already initialized"
msgstr ""
#: ports/espressif/common-hal/mdns/Server.c
#: ports/raspberrypi/common-hal/mdns/Server.c
msgid "mDNS only works with built-in WiFi"
msgstr ""
#: py/parse.c
msgid "malformed f-string"
msgstr ""
#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr ""
#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "matrix is not positive definite"
msgstr ""
#: ports/espressif/common-hal/_bleio/Descriptor.c
#: ports/nrf/common-hal/_bleio/Characteristic.c
#: ports/nrf/common-hal/_bleio/Descriptor.c
#, c-format
msgid "max_length must be 0-%d when fixed_length is %s"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "maximum number of dimensions is "
msgstr ""
#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter must be > 0"
msgstr ""
#: extmod/ulab/code/scipy/optimize/optimize.c
msgid "maxiter should be > 0"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "median argument must be an ndarray"
msgstr ""
#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr ""
#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr ""
#: py/objarray.c
msgid "memoryview offset too large"
msgstr ""
#: py/objarray.c
msgid "memoryview: length is not a multiple of itemsize"
msgstr ""
#: extmod/modtime.c
msgid "mktime needs a tuple of length 8 or 9"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "mode must be complete, or reduced"
msgstr ""
#: py/builtinimport.c
msgid "module not found"
msgstr ""
#: ports/espressif/common-hal/wifi/Monitor.c
msgid "monitor init failed"
msgstr ""
#: extmod/ulab/code/numpy/poly.c
msgid "more degrees of freedom than data points"
msgstr ""
#: py/compile.c
msgid "multiple *x in assignment"
msgstr ""
#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr ""
#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr ""
#: py/emitnative.c
msgid "must raise an object"
msgstr ""
#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr ""
#: py/runtime.c
msgid "name '%q' is not defined"
msgstr ""
#: py/runtime.c
msgid "name not defined"
msgstr ""
#: py/persistentcode.c
msgid "native code in .mpy unsupported"
msgstr ""
#: py/asmthumb.c
msgid "native method too big"
msgstr ""
#: py/emitnative.c
msgid "native yield"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "ndarray length overflows"
msgstr ""
#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr ""
#: py/modmath.c
msgid "negative factorial"
msgstr ""
#: py/objint_longlong.c py/objint_mpz.c py/runtime.c
msgid "negative power with no float support"
msgstr ""
#: py/objint_mpz.c py/runtime.c
msgid "negative shift count"
msgstr ""
#: shared-bindings/_pixelmap/PixelMap.c
msgid "nested index must be int"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "no SD card"
msgstr ""
#: py/vm.c
msgid "no active exception to reraise"
msgstr ""
#: py/compile.c
msgid "no binding for nonlocal found"
msgstr ""
#: shared-module/msgpack/__init__.c
msgid "no default packer"
msgstr ""
#: extmod/modrandom.c
msgid "no default seed"
msgstr ""
#: py/builtinimport.c
msgid "no module named '%q'"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "no response from SD card"
msgstr ""
#: ports/espressif/common-hal/espcamera/Camera.c py/objobject.c py/runtime.c
msgid "no such attribute"
msgstr ""
#: ports/espressif/common-hal/_bleio/Connection.c
#: ports/nrf/common-hal/_bleio/Connection.c
msgid "non-UUID found in service_uuids_whitelist"
msgstr ""
#: py/compile.c
msgid "non-default argument follows default argument"
msgstr ""
#: py/objstr.c
msgid "non-hex digit found"
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "non-zero timeout must be > 0.01"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "non-zero timeout must be >= interval"
msgstr ""
#: shared-bindings/_bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""
#: py/parse.c
msgid "not a constant"
msgstr ""
#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr ""
#: py/objstr.c
msgid "not enough arguments for format string"
msgstr ""
#: extmod/ulab/code/numpy/carray/carray_tools.c
msgid "not implemented for complex dtype"
msgstr ""
#: extmod/ulab/code/numpy/bitwise.c
msgid "not supported for input types"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "number of points must be at least 2"
msgstr ""
#: py/builtinhelp.c
msgid "object "
msgstr ""
#: py/obj.c
#, c-format
msgid "object '%s' isn't a tuple or list"
msgstr ""
#: py/obj.c
msgid "object doesn't support item assignment"
msgstr ""
#: py/obj.c
msgid "object doesn't support item deletion"
msgstr ""
#: py/obj.c
msgid "object has no len"
msgstr ""
#: py/obj.c
msgid "object isn't subscriptable"
msgstr ""
#: py/runtime.c
msgid "object not an iterator"
msgstr ""
#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr ""
#: py/sequence.c shared-bindings/displayio/Group.c
msgid "object not in sequence"
msgstr ""
#: py/runtime.c
msgid "object not iterable"
msgstr ""
#: py/obj.c
#, c-format
msgid "object of type '%s' has no len()"
msgstr ""
#: py/obj.c
msgid "object with buffer protocol required"
msgstr ""
#: py/objstr.c
msgid "odd-length string"
msgstr ""
#: supervisor/shared/web_workflow/web_workflow.c
msgid "off"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "offset is too large"
msgstr ""
#: shared-bindings/dualbank/__init__.c
msgid "offset must be >= 0"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "offset must be non-negative and no greater than buffer length"
msgstr ""
#: ports/nrf/common-hal/audiobusio/PDMIn.c
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only bit_depth=16 is supported"
msgstr ""
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only mono is supported"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "only ndarrays can be concatenated"
msgstr ""
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only oversample=64 is supported"
msgstr ""
#: ports/nrf/common-hal/audiobusio/PDMIn.c
#: ports/stm/common-hal/audiobusio/PDMIn.c
msgid "only sample_rate=16000 is supported"
msgstr ""
#: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c
#: shared-bindings/alarm/SleepMemory.c shared-bindings/memorymap/AddressRange.c
#: shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr ""
#: py/vm.c
msgid "opcode"
msgstr ""
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/bitwise.c
#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/vector.c
msgid "operands could not be broadcast together"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for 2D arrays only"
msgstr ""
#: extmod/ulab/code/numpy/linalg/linalg.c
msgid "operation is defined for ndarrays only"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is implemented for 1D Boolean arrays only"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "operation is not implemented on ndarrays"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "operation is not supported for given type"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "operation not supported for the input types"
msgstr ""
#: py/modbuiltins.c
msgid "ord expects a character"
msgstr ""
#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "out array is too small"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out keyword is not supported for complex dtype"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out keyword is not supported for function"
msgstr ""
#: extmod/ulab/code/utils/utils.c
msgid "out must be a float dense array"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out must be an ndarray"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "out must be of float dtype"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "out of range of target"
msgstr ""
#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr ""
#: py/modstruct.c
#, c-format
msgid "pack expected %d items for packing (got %d)"
msgstr ""
#: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c
msgid "palette must be 32 bytes long"
msgstr ""
#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr ""
#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "pixel coordinates out of bounds"
msgstr ""
#: extmod/vfs_posix_file.c
msgid "poll on file not available on win32"
msgstr ""
#: ports/espressif/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr ""
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/cxd56/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#: ports/raspberrypi/common-hal/pulseio/PulseIn.c
#: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c
#: shared-bindings/ps2io/Ps2.c
msgid "pop from empty %q"
msgstr ""
#: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c
msgid "port must be >= 0"
msgstr ""
#: py/compile.c
msgid "positional arg after **"
msgstr ""
#: py/compile.c
msgid "positional arg after keyword arg"
msgstr ""
#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr ""
#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr ""
#: ports/raspberrypi/common-hal/rp2pio/StateMachine.c
msgid "pull masks conflict with direction masks"
msgstr ""
#: py/parse.c
msgid "raw f-strings are not supported"
msgstr ""
#: extmod/ulab/code/numpy/fft/fft_tools.c
msgid "real and imaginary parts must be of equal length"
msgstr ""
#: py/builtinimport.c
msgid "relative import"
msgstr ""
#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr ""
#: extmod/ulab/code/ndarray_operators.c
msgid "results cannot be cast to specified type"
msgstr ""
#: py/compile.c
msgid "return annotation must be an identifier"
msgstr ""
#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] duplicates another pin assignment"
msgstr ""
#: shared-bindings/rgbmatrix/RGBMatrix.c
#, c-format
msgid "rgb_pins[%d] is not on the same port as clock"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "roll argument must be an ndarray"
msgstr ""
#: py/objstr.c
msgid "rsplit(None,n)"
msgstr ""
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
#: ports/raspberrypi/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr ""
#: py/modmicropython.c
msgid "schedule queue full"
msgstr ""
#: py/builtinimport.c
msgid "script compilation not supported"
msgstr ""
#: py/nativeglue.c
msgid "set unsupported"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "shape must be integer or tuple of integers"
msgstr ""
#: shared-module/msgpack/__init__.c
msgid "short read"
msgstr ""
#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr ""
#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr ""
#: extmod/ulab/code/ulab_tools.c
msgid "size is defined for ndarrays only"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr ""
#: py/nativeglue.c
msgid "slice unsupported"
msgstr ""
#: py/objint.c py/sequence.c
msgid "small int overflow"
msgstr ""
#: main.c
msgid "soft reboot\n"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "sort argument must be an ndarray"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos array must be of shape (n_section, 6)"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sos[:, 3] should be all ones"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "sosfilt requires iterable arguments"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source palette too large"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 2 or 65536"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 65536"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "source_bitmap must have value_count of 8"
msgstr ""
#: extmod/modre.c
msgid "splitting with sub-captures"
msgstr ""
#: py/objstr.c
msgid "start/end indices"
msgstr ""
#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr ""
#: py/stream.c shared-bindings/getpass/__init__.c
msgid "stream operation not supported"
msgstr ""
#: py/objarray.c py/objstr.c
msgid "string argument without an encoding"
msgstr ""
#: py/objstrunicode.c
msgid "string index out of range"
msgstr ""
#: py/objstrunicode.c
#, c-format
msgid "string indices must be integers, not %s"
msgstr ""
#: extmod/moductypes.c
msgid "struct: can't index"
msgstr ""
#: extmod/moductypes.c
msgid "struct: index out of range"
msgstr ""
#: extmod/moductypes.c
msgid "struct: no fields"
msgstr ""
#: py/objarray.c py/objstr.c
msgid "substring not found"
msgstr ""
#: py/compile.c
msgid "super() can't find self"
msgstr ""
#: extmod/modjson.c
msgid "syntax error in JSON"
msgstr ""
#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr ""
#: extmod/modtime.c
msgid "ticks interval overflow"
msgstr ""
#: ports/nrf/common-hal/watchdog/WatchDogTimer.c
msgid "timeout duration exceeded the maximum supported value"
msgstr ""
#: ports/nrf/common-hal/_bleio/Adapter.c
msgid "timeout must be < 655.35 secs"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v1 card"
msgstr ""
#: shared-module/sdcardio/SDCard.c
msgid "timeout waiting for v2 card"
msgstr ""
#: ports/stm/common-hal/pwmio/PWMOut.c
msgid "timer re-init"
msgstr ""
#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "tobytes can be invoked for dense arrays only"
msgstr ""
#: py/compile.c
msgid "too many args"
msgstr ""
#: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/create.c
msgid "too many dimensions"
msgstr ""
#: extmod/ulab/code/ndarray.c
msgid "too many indices"
msgstr ""
#: py/asmthumb.c
msgid "too many locals for native method"
msgstr ""
#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D arrays of equal length"
msgstr ""
#: extmod/ulab/code/numpy/approx.c
msgid "trapz is defined for 1D iterables"
msgstr ""
#: py/obj.c
msgid "tuple/list has wrong length"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_driver_install returned esp-idf error #%d"
msgstr ""
#: ports/espressif/common-hal/canio/CAN.c
#, c-format
msgid "twai_start returned esp-idf error #%d"
msgstr ""
#: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c
msgid "tx and rx cannot both be None"
msgstr ""
#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr ""
#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr ""
#: py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr ""
#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr ""
#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr ""
#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr ""
#: py/parse.c
msgid "unexpected indent"
msgstr ""
#: py/bc.c
msgid "unexpected keyword argument"
msgstr ""
#: py/argcheck.c py/bc.c py/objnamedtuple.c
#: shared-bindings/traceback/__init__.c
msgid "unexpected keyword argument '%q'"
msgstr ""
#: py/lexer.c
msgid "unicode name escapes"
msgstr ""
#: py/parse.c
msgid "unindent doesn't match any outer indent level"
msgstr ""
#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr ""
#: py/objstr.c
msgid "unknown format code '%c' for object of type '%q'"
msgstr ""
#: py/compile.c
msgid "unknown type"
msgstr ""
#: py/compile.c
msgid "unknown type '%q'"
msgstr ""
#: py/objstr.c
#, c-format
msgid "unmatched '%c' in format"
msgstr ""
#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr ""
#: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c
msgid "unsupported %q type"
msgstr ""
#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr ""
#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr ""
#: shared-module/gifio/GifWriter.c
msgid "unsupported colorspace for GifWriter"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "unsupported colorspace for dither"
msgstr ""
#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr ""
#: py/runtime.c
msgid "unsupported type for %q: '%s'"
msgstr ""
#: py/runtime.c
msgid "unsupported type for operator"
msgstr ""
#: py/runtime.c
msgid "unsupported types for %q: '%q', '%q'"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "usecols is too high"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "usecols keyword must be specified"
msgstr ""
#: py/objint.c
#, c-format
msgid "value must fit in %d byte(s)"
msgstr ""
#: shared-bindings/bitmaptools/__init__.c
msgid "value out of range of target"
msgstr ""
#: extmod/moddeflate.c
msgid "wbits"
msgstr ""
#: shared-bindings/is31fl3741/FrameBuffer.c
msgid "width must be greater than zero"
msgstr ""
#: ports/espressif/common-hal/wifi/Radio.c
#: ports/raspberrypi/common-hal/wifi/Radio.c
msgid "wifi is not enabled"
msgstr ""
#: ports/raspberrypi/common-hal/wifi/Monitor.c
msgid "wifi.Monitor not available"
msgstr ""
#: shared-bindings/_bleio/Adapter.c
msgid "window must be <= interval"
msgstr ""
#: extmod/ulab/code/numpy/numerical.c
msgid "wrong axis index"
msgstr ""
#: extmod/ulab/code/numpy/create.c
msgid "wrong axis specified"
msgstr ""
#: extmod/ulab/code/numpy/io/io.c
msgid "wrong dtype"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong index type"
msgstr ""
#: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/create.c
#: extmod/ulab/code/numpy/io/io.c extmod/ulab/code/numpy/transform.c
#: extmod/ulab/code/numpy/vector.c
msgid "wrong input type"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of condition array"
msgstr ""
#: extmod/ulab/code/numpy/transform.c
msgid "wrong length of index array"
msgstr ""
#: extmod/ulab/code/numpy/create.c py/objarray.c py/objstr.c
msgid "wrong number of arguments"
msgstr ""
#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr ""
#: extmod/ulab/code/numpy/vector.c
msgid "wrong output type"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be an ndarray"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of float type"
msgstr ""
#: extmod/ulab/code/scipy/signal/signal.c
msgid "zi must be of shape (n_section, 2)"
msgstr ""
#~ msgid ""
#~ "\n"
#~ "Please file an issue with the contents of your CIRCUITPY drive at \n"
#~ "https://github.com/adafruit/circuitpython/issues\n"
#~ msgstr ""
#~ "\n"
#~ "Παρακαλώ δημιουγήστε ενα πρόβλημα με τα περιεχόμενα του CIRCUITPY δίσκου "
#~ "στο\n"
#~ "https://github.com/adafruit/circuitpython/issues\n"
#~ msgid ""
#~ "\n"
#~ "Please file an issue with your program at https://github.com/adafruit/"
#~ "circuitpython/issues."
#~ msgstr ""
#~ "\n"
#~ "Παρακαλώ δημιουργήστε ένα πρόβλημα στο https://github.com/adafruit/"
#~ "circuitpython/issues με το πρόγραμμά σας."
#, c-format
#~ msgid "%02X"
#~ msgstr "%02X"
#~ msgid "%q"
#~ msgstr "%q"
#~ msgid "%q length must be >= 1"
#~ msgstr "%q μήκος πρέπει να είναι >= 1"
#~ msgid "%q must be >= 0"
#~ msgstr "%q πρέπει να είναι >= 0"
#~ msgid "%q must be >= 1"
#~ msgstr "%q πρέπει να είναι >= 1"
#~ msgid "%q must be a string"
#~ msgstr "%q πρέπει να είναι string"
#~ msgid "%q must be an int"
#~ msgstr "%q πρέπει να είναι int"
#~ msgid "%q must be of type %q"
#~ msgstr "%q πρέπει να είναι τύπου %q"
#~ msgid "%q must be of type %q or None"
#~ msgstr "%q πρέπει να είναι τύπου %q ή None"
#~ msgid "%q pin invalid"
#~ msgstr "%q άκυρο pin"
#~ msgid "%q with a report ID of 0 must be of length 1"
#~ msgstr "%q με ID αναφοράς 0 πρέπει να έχει μήκος 1"
#~ msgid "'await', 'async for' or 'async with' outside async function"
#~ msgstr "'await', 'async for' ή 'async with' εκτός ασύνχρονης συνάρτησης"
#~ msgid "'break' outside loop"
#~ msgstr "'break' εκτός επανάληψης"
#~ msgid "'continue' outside loop"
#~ msgstr "'continue' εκτός επανάληψης"
#~ msgid "'coroutine' object is not an iterator"
#~ msgstr ""
#~ "'coroutine' αντικείμενο δεν μπορεί να χρησιμοποιηθεί σαν επαναλήπτης"
#, fuzzy
#~ msgid "64 bit types"
#~ msgstr "64 bit τύποι"
#~ msgid "ADC2 is being used by WiFi"
#~ msgstr "Το ADC2 χρησιμοποιείται απο το WIFI"
#~ msgid "At most %d %q may be specified (not %d)"
#~ msgstr "Το πολύ %d %q μπορεί να είναι καθορισμένα (όχι %d)"
#~ msgid "Attempted heap allocation when VM not running."
#~ msgstr "Προσπάθεια δέσμευσης heap όταν το VM δεν τρέχει."
#~ msgid "Bit clock and word select must be sequential pins"
#~ msgstr "Ρολόι bit και word select πρέπει να είναι διαδοχικά pins"
#~ msgid "Boot device must be first device (interface #0)."
#~ msgstr "Η συσκευή boot πρέπει να είναι η πρώτη συσκευή (interface #0)."
#~ msgid "Brightness must be 0-1.0"
#~ msgstr "Η φωτινότητα πρέπει να είναι μεταξύ 0-1.0"
#~ msgid "Buffer is too small"
#~ msgstr "Πολύ μικρό buffer"
#~ msgid "Cannot transfer without MOSI and MISO pins"
#~ msgstr "Δεν μπορεί να γίνει μεταφορά χωρίς MOSI και MISO pins"
#~ msgid "CircuitPython was unable to allocate the heap."
#~ msgstr "Η CircuitPython δεν μπορέσε να δεσμεύσει το heap."
#~ msgid "Corrupt .mpy file"
#~ msgstr "Κατεστραμένο .mpy αρχείο"
#~ msgid "Crash into the HardFault_Handler."
#~ msgstr "Κατέρευσε μέσα στο HardFault_Handler."