263 lines
7.2 KiB
C
263 lines
7.2 KiB
C
#include <stdio.h>
|
|
#include <stm32f4xx_hal.h>
|
|
|
|
#include "nlr.h"
|
|
#include "misc.h"
|
|
#include "mpconfig.h"
|
|
#include "qstr.h"
|
|
#include "obj.h"
|
|
#include "runtime.h"
|
|
#include "timer.h"
|
|
#include "led.h"
|
|
#include "pin.h"
|
|
#include "genhdr/pins.h"
|
|
|
|
typedef struct _pyb_led_obj_t {
|
|
mp_obj_base_t base;
|
|
machine_uint_t led_id;
|
|
const pin_obj_t *led_pin;
|
|
} pyb_led_obj_t;
|
|
|
|
STATIC const pyb_led_obj_t pyb_led_obj[] = {
|
|
{{&pyb_led_type}, 1, &MICROPY_HW_LED1},
|
|
#if defined(MICROPY_HW_LED2)
|
|
{{&pyb_led_type}, 2, &MICROPY_HW_LED2},
|
|
#if defined(MICROPY_HW_LED3)
|
|
{{&pyb_led_type}, 3, &MICROPY_HW_LED3},
|
|
#if defined(MICROPY_HW_LED4)
|
|
{{&pyb_led_type}, 4, &MICROPY_HW_LED4},
|
|
#endif
|
|
#endif
|
|
#endif
|
|
};
|
|
#define NUM_LEDS ARRAY_SIZE(pyb_led_obj)
|
|
|
|
void led_init(void) {
|
|
/* GPIO structure */
|
|
GPIO_InitTypeDef GPIO_InitStructure;
|
|
|
|
/* Configure I/O speed, mode, output type and pull */
|
|
GPIO_InitStructure.Speed = GPIO_SPEED_LOW;
|
|
GPIO_InitStructure.Mode = MICROPY_HW_LED_OTYPE;
|
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
|
|
/* Turn off LEDs and initialize */
|
|
for (int led = 0; led < NUM_LEDS; led++) {
|
|
const pin_obj_t *led_pin = pyb_led_obj[led].led_pin;
|
|
MICROPY_HW_LED_OFF(led_pin);
|
|
GPIO_InitStructure.Pin = led_pin->pin_mask;
|
|
HAL_GPIO_Init(led_pin->gpio, &GPIO_InitStructure);
|
|
}
|
|
|
|
#if defined(PYBV4) || defined(PYBV10)
|
|
// LED4 (blue) is on PB4 which is TIM3_CH1
|
|
// we use PWM on this channel to fade the LED
|
|
|
|
// LED3 (yellow) is on PA15 which has TIM2_CH1, so we could PWM that as well
|
|
|
|
// GPIO configuration
|
|
GPIO_InitStructure.Pin = MICROPY_HW_LED4.pin_mask;
|
|
GPIO_InitStructure.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStructure.Speed = GPIO_SPEED_FAST;
|
|
GPIO_InitStructure.Pull = GPIO_NOPULL;
|
|
GPIO_InitStructure.Alternate = GPIO_AF2_TIM3;
|
|
HAL_GPIO_Init(MICROPY_HW_LED4.gpio, &GPIO_InitStructure);
|
|
|
|
// PWM mode configuration
|
|
TIM_OC_InitTypeDef oc_init;
|
|
oc_init.OCMode = TIM_OCMODE_PWM1;
|
|
oc_init.Pulse = 0; // off
|
|
oc_init.OCPolarity = TIM_OCPOLARITY_HIGH;
|
|
oc_init.OCFastMode = TIM_OCFAST_DISABLE;
|
|
HAL_TIM_PWM_ConfigChannel(&TIM3_Handle, &oc_init, TIM_CHANNEL_1);
|
|
|
|
// start PWM
|
|
TIM_CCxChannelCmd(TIM3, TIM_CHANNEL_1, TIM_CCx_ENABLE);
|
|
#endif
|
|
}
|
|
|
|
void led_state(pyb_led_t led, int state) {
|
|
if (led < 1 || led > NUM_LEDS) {
|
|
return;
|
|
}
|
|
#if defined(PYBV4) || defined(PYBV10)
|
|
if (led == 4) {
|
|
if (state) {
|
|
TIM3->CCR1 = 0xffff;
|
|
} else {
|
|
TIM3->CCR1 = 0;
|
|
}
|
|
return;
|
|
}
|
|
#endif
|
|
const pin_obj_t *led_pin = pyb_led_obj[led - 1].led_pin;
|
|
//printf("led_state(%d,%d)\n", led, state);
|
|
if (state == 0) {
|
|
// turn LED off
|
|
MICROPY_HW_LED_OFF(led_pin);
|
|
} else {
|
|
// turn LED on
|
|
MICROPY_HW_LED_ON(led_pin);
|
|
}
|
|
}
|
|
|
|
void led_toggle(pyb_led_t led) {
|
|
if (led < 1 || led > NUM_LEDS) {
|
|
return;
|
|
}
|
|
|
|
#if defined(PYBV4) || defined(PYBV10)
|
|
if (led == 4) {
|
|
if (TIM3->CCR1 == 0) {
|
|
TIM3->CCR1 = 0xffff;
|
|
} else {
|
|
TIM3->CCR1 = 0;
|
|
}
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
const pin_obj_t *led_pin = pyb_led_obj[led - 1].led_pin;
|
|
GPIO_TypeDef *gpio = led_pin->gpio;
|
|
|
|
// We don't know if we're turning the LED on or off, but we don't really
|
|
// care. Just invert the state.
|
|
if (gpio->ODR & led_pin->pin_mask) {
|
|
// pin is high, make it low
|
|
gpio->BSRRH = led_pin->pin_mask;
|
|
} else {
|
|
// pin is low, make it high
|
|
gpio->BSRRL = led_pin->pin_mask;
|
|
}
|
|
}
|
|
|
|
int led_get_intensity(pyb_led_t led) {
|
|
if (led < 1 || led > NUM_LEDS) {
|
|
return 0;
|
|
}
|
|
|
|
#if defined(PYBV4) || defined(PYBV10)
|
|
if (led == 4) {
|
|
machine_uint_t i = TIM3->CCR1 * 255 / ((USBD_CDC_POLLING_INTERVAL*1000) - 1);
|
|
if (i > 255) {
|
|
i = 255;
|
|
}
|
|
return i;
|
|
}
|
|
#endif
|
|
|
|
const pin_obj_t *led_pin = pyb_led_obj[led - 1].led_pin;
|
|
GPIO_TypeDef *gpio = led_pin->gpio;
|
|
|
|
// TODO convert high/low to on/off depending on board
|
|
if (gpio->ODR & led_pin->pin_mask) {
|
|
// pin is high
|
|
return 255;
|
|
} else {
|
|
// pin is low
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
void led_set_intensity(pyb_led_t led, machine_int_t intensity) {
|
|
#if defined(PYBV4) || defined(PYBV10)
|
|
if (led == 4) {
|
|
// set intensity using PWM pulse width
|
|
if (intensity < 0) {
|
|
intensity = 0;
|
|
} else if (intensity >= 255) {
|
|
intensity = 0xffff;
|
|
} else {
|
|
intensity = intensity * ((USBD_CDC_POLLING_INTERVAL*1000) - 1) / 255;
|
|
}
|
|
TIM3->CCR1 = intensity;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
// intensity not supported for this LED; just turn it on/off
|
|
led_state(led, intensity > 0);
|
|
}
|
|
|
|
void led_debug(int n, int delay) {
|
|
led_state(1, n & 1);
|
|
led_state(2, n & 2);
|
|
led_state(3, n & 4);
|
|
led_state(4, n & 8);
|
|
HAL_Delay(delay);
|
|
}
|
|
|
|
/******************************************************************************/
|
|
/* Micro Python bindings */
|
|
|
|
void led_obj_print(void (*print)(void *env, const char *fmt, ...), void *env, mp_obj_t self_in, mp_print_kind_t kind) {
|
|
pyb_led_obj_t *self = self_in;
|
|
print(env, "<LED %lu>", self->led_id);
|
|
}
|
|
|
|
STATIC mp_obj_t led_obj_make_new(mp_obj_t type_in, uint n_args, uint n_kw, const mp_obj_t *args) {
|
|
// check arguments
|
|
mp_arg_check_num(n_args, n_kw, 1, 1, false);
|
|
|
|
// get led number
|
|
machine_int_t led_id = mp_obj_get_int(args[0]) - 1;
|
|
|
|
// check led number
|
|
if (!(0 <= led_id && led_id < NUM_LEDS)) {
|
|
nlr_raise(mp_obj_new_exception_msg_varg(&mp_type_ValueError, "LED %d does not exist", led_id));
|
|
}
|
|
|
|
// return static led object
|
|
return (mp_obj_t)&pyb_led_obj[led_id];
|
|
}
|
|
|
|
mp_obj_t led_obj_on(mp_obj_t self_in) {
|
|
pyb_led_obj_t *self = self_in;
|
|
led_state(self->led_id, 1);
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t led_obj_off(mp_obj_t self_in) {
|
|
pyb_led_obj_t *self = self_in;
|
|
led_state(self->led_id, 0);
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t led_obj_toggle(mp_obj_t self_in) {
|
|
pyb_led_obj_t *self = self_in;
|
|
led_toggle(self->led_id);
|
|
return mp_const_none;
|
|
}
|
|
|
|
mp_obj_t led_obj_intensity(uint n_args, const mp_obj_t *args) {
|
|
pyb_led_obj_t *self = args[0];
|
|
if (n_args == 1) {
|
|
return mp_obj_new_int(led_get_intensity(self->led_id));
|
|
} else {
|
|
led_set_intensity(self->led_id, mp_obj_get_int(args[1]));
|
|
return mp_const_none;
|
|
}
|
|
}
|
|
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_1(led_obj_on_obj, led_obj_on);
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_1(led_obj_off_obj, led_obj_off);
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_1(led_obj_toggle_obj, led_obj_toggle);
|
|
STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(led_obj_intensity_obj, 1, 2, led_obj_intensity);
|
|
|
|
STATIC const mp_map_elem_t led_locals_dict_table[] = {
|
|
{ MP_OBJ_NEW_QSTR(MP_QSTR_on), (mp_obj_t)&led_obj_on_obj },
|
|
{ MP_OBJ_NEW_QSTR(MP_QSTR_off), (mp_obj_t)&led_obj_off_obj },
|
|
{ MP_OBJ_NEW_QSTR(MP_QSTR_toggle), (mp_obj_t)&led_obj_toggle_obj },
|
|
{ MP_OBJ_NEW_QSTR(MP_QSTR_intensity), (mp_obj_t)&led_obj_intensity_obj },
|
|
};
|
|
|
|
STATIC MP_DEFINE_CONST_DICT(led_locals_dict, led_locals_dict_table);
|
|
|
|
const mp_obj_type_t pyb_led_type = {
|
|
{ &mp_type_type },
|
|
.name = MP_QSTR_LED,
|
|
.print = led_obj_print,
|
|
.make_new = led_obj_make_new,
|
|
.locals_dict = (mp_obj_t)&led_locals_dict,
|
|
};
|