491 lines
23 KiB
C
491 lines
23 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f4xx_hal_usart.h
|
|
* @author MCD Application Team
|
|
* @version V1.1.0
|
|
* @date 19-June-2014
|
|
* @brief Header file of USART HAL module.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
|
#ifndef __STM32F4xx_HAL_USART_H
|
|
#define __STM32F4xx_HAL_USART_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f4xx_hal_def.h"
|
|
|
|
/** @addtogroup STM32F4xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup USART
|
|
* @{
|
|
*/
|
|
|
|
/* Exported types ------------------------------------------------------------*/
|
|
/**
|
|
* @brief USART Init Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
|
|
The baud rate is computed using the following formula:
|
|
- IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
|
|
- FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
|
|
|
|
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
|
|
This parameter can be a value of @ref USART_Word_Length */
|
|
|
|
uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
|
|
This parameter can be a value of @ref USART_Stop_Bits */
|
|
|
|
uint32_t Parity; /*!< Specifies the parity mode.
|
|
This parameter can be a value of @ref USART_Parity
|
|
@note When parity is enabled, the computed parity is inserted
|
|
at the MSB position of the transmitted data (9th bit when
|
|
the word length is set to 9 data bits; 8th bit when the
|
|
word length is set to 8 data bits). */
|
|
|
|
uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
|
|
This parameter can be a value of @ref USART_Mode */
|
|
|
|
uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
|
|
This parameter can be a value of @ref USART_Clock_Polarity */
|
|
|
|
uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
|
|
This parameter can be a value of @ref USART_Clock_Phase */
|
|
|
|
uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
|
|
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
|
|
This parameter can be a value of @ref USART_Last_Bit */
|
|
}USART_InitTypeDef;
|
|
|
|
/**
|
|
* @brief HAL State structures definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
|
|
HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
|
|
HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
|
|
HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
|
|
HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
|
|
HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
|
|
HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
|
|
HAL_USART_STATE_ERROR = 0x04 /*!< Error */
|
|
}HAL_USART_StateTypeDef;
|
|
|
|
/**
|
|
* @brief HAL USART Error Code structure definition
|
|
*/
|
|
typedef enum
|
|
{
|
|
HAL_USART_ERROR_NONE = 0x00, /*!< No error */
|
|
HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
|
|
HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
|
|
HAL_USART_ERROR_FE = 0x04, /*!< frame error */
|
|
HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
|
|
HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
|
|
}HAL_USART_ErrorTypeDef;
|
|
|
|
/**
|
|
* @brief USART handle Structure definition
|
|
*/
|
|
typedef struct
|
|
{
|
|
USART_TypeDef *Instance; /* USART registers base address */
|
|
|
|
USART_InitTypeDef Init; /* Usart communication parameters */
|
|
|
|
uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */
|
|
|
|
uint16_t TxXferSize; /* Usart Tx Transfer size */
|
|
|
|
__IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */
|
|
|
|
uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */
|
|
|
|
uint16_t RxXferSize; /* Usart Rx Transfer size */
|
|
|
|
__IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */
|
|
|
|
DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */
|
|
|
|
DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */
|
|
|
|
HAL_LockTypeDef Lock; /* Locking object */
|
|
|
|
__IO HAL_USART_StateTypeDef State; /* Usart communication state */
|
|
|
|
__IO HAL_USART_ErrorTypeDef ErrorCode; /* USART Error code */
|
|
|
|
}USART_HandleTypeDef;
|
|
|
|
|
|
/* Exported constants --------------------------------------------------------*/
|
|
/** @defgroup USART_Exported_Constants
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup USART_Word_Length
|
|
* @{
|
|
*/
|
|
#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
|
|
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
|
|
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
|
|
((LENGTH) == USART_WORDLENGTH_9B))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Stop_Bits
|
|
* @{
|
|
*/
|
|
#define USART_STOPBITS_1 ((uint32_t)0x00000000)
|
|
#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
|
|
#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
|
|
#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
|
|
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
|
|
((STOPBITS) == USART_STOPBITS_0_5) || \
|
|
((STOPBITS) == USART_STOPBITS_1_5) || \
|
|
((STOPBITS) == USART_STOPBITS_2))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Parity
|
|
* @{
|
|
*/
|
|
#define USART_PARITY_NONE ((uint32_t)0x00000000)
|
|
#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
|
|
#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
|
|
#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
|
|
((PARITY) == USART_PARITY_EVEN) || \
|
|
((PARITY) == USART_PARITY_ODD))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Mode
|
|
* @{
|
|
*/
|
|
#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
|
|
#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
|
|
#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
|
|
#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Clock
|
|
* @{
|
|
*/
|
|
#define USART_CLOCK_DISABLED ((uint32_t)0x00000000)
|
|
#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
|
|
#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
|
|
((CLOCK) == USART_CLOCK_ENABLED))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Clock_Polarity
|
|
* @{
|
|
*/
|
|
#define USART_POLARITY_LOW ((uint32_t)0x00000000)
|
|
#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
|
|
#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Clock_Phase
|
|
* @{
|
|
*/
|
|
#define USART_PHASE_1EDGE ((uint32_t)0x00000000)
|
|
#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
|
|
#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Last_Bit
|
|
* @{
|
|
*/
|
|
#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000)
|
|
#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
|
|
#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
|
|
((LASTBIT) == USART_LASTBIT_ENABLE))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_NACK_State
|
|
* @{
|
|
*/
|
|
#define USARTNACK_ENABLED ((uint32_t)USART_CR3_NACK)
|
|
#define USARTNACK_DISABLED ((uint32_t)0x00000000)
|
|
#define IS_USART_NACK_STATE(NACK) (((NACK) == USARTNACK_ENABLED) || \
|
|
((NACK) == USARTNACK_DISABLED))
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Flags
|
|
* Elements values convention: 0xXXXX
|
|
* - 0xXXXX : Flag mask in the SR register
|
|
* @{
|
|
*/
|
|
|
|
#define USART_FLAG_TXE ((uint32_t)0x00000080)
|
|
#define USART_FLAG_TC ((uint32_t)0x00000040)
|
|
#define USART_FLAG_RXNE ((uint32_t)0x00000020)
|
|
#define USART_FLAG_IDLE ((uint32_t)0x00000010)
|
|
#define USART_FLAG_ORE ((uint32_t)0x00000008)
|
|
#define USART_FLAG_NE ((uint32_t)0x00000004)
|
|
#define USART_FLAG_FE ((uint32_t)0x00000002)
|
|
#define USART_FLAG_PE ((uint32_t)0x00000001)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup USART_Interrupt_definition
|
|
* Elements values convention: 0xY000XXXX
|
|
* - XXXX : Interrupt mask in the XX register
|
|
* - Y : Interrupt source register (2bits)
|
|
* - 01: CR1 register
|
|
* - 10: CR2 register
|
|
* - 11: CR3 register
|
|
*
|
|
* @{
|
|
*/
|
|
#define USART_IT_PE ((uint32_t)0x10000100)
|
|
#define USART_IT_TXE ((uint32_t)0x10000080)
|
|
#define USART_IT_TC ((uint32_t)0x10000040)
|
|
#define USART_IT_RXNE ((uint32_t)0x10000020)
|
|
#define USART_IT_IDLE ((uint32_t)0x10000010)
|
|
|
|
#define USART_IT_LBD ((uint32_t)0x20000040)
|
|
#define USART_IT_CTS ((uint32_t)0x30000400)
|
|
|
|
#define USART_IT_ERR ((uint32_t)0x30000001)
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported macro ------------------------------------------------------------*/
|
|
/** @brief Reset USART handle state
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
|
|
|
|
/** @brief Checks whether the specified Smartcard flag is set or not.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg USART_FLAG_TXE: Transmit data register empty flag
|
|
* @arg USART_FLAG_TC: Transmission Complete flag
|
|
* @arg USART_FLAG_RXNE: Receive data register not empty flag
|
|
* @arg USART_FLAG_IDLE: Idle Line detection flag
|
|
* @arg USART_FLAG_ORE: OverRun Error flag
|
|
* @arg USART_FLAG_NE: Noise Error flag
|
|
* @arg USART_FLAG_FE: Framing Error flag
|
|
* @arg USART_FLAG_PE: Parity Error flag
|
|
* @retval The new state of __FLAG__ (TRUE or FALSE).
|
|
*/
|
|
|
|
#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
|
|
|
|
/** @brief Clears the specified Smartcard pending flags.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @param __FLAG__: specifies the flag to check.
|
|
* This parameter can be any combination of the following values:
|
|
* @arg USART_FLAG_TC: Transmission Complete flag.
|
|
* @arg USART_FLAG_RXNE: Receive data register not empty flag.
|
|
*
|
|
* @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
|
|
* error) and IDLE (Idle line detected) flags are cleared by software
|
|
* sequence: a read operation to USART_SR register followed by a read
|
|
* operation to USART_DR register.
|
|
* @note RXNE flag can be also cleared by a read to the USART_DR register.
|
|
* @note TC flag can be also cleared by software sequence: a read operation to
|
|
* USART_SR register followed by a write operation to USART_DR register.
|
|
* @note TXE flag is cleared only by a write to the USART_DR register.
|
|
*
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
|
|
|
|
/** @brief Clear the USART PE pending flag.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
|
|
(__HANDLE__)->Instance->DR;}while(0)
|
|
/** @brief Clear the USART FE pending flag.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the USART NE pending flag.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the UART ORE pending flag.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Clear the USART IDLE pending flag.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @retval None
|
|
*/
|
|
#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
|
|
|
|
/** @brief Enables or disables the specified Usart interrupts.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @param __INTERRUPT__: specifies the USART interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg USART_IT_TC: Transmission complete interrupt
|
|
* @arg USART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg USART_IT_IDLE: Idle line detection interrupt
|
|
* @arg USART_IT_PE: Parity Error interrupt
|
|
* @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
|
|
* @param NewState: new state of the specified Usart interrupt.
|
|
* This parameter can be: ENABLE or DISABLE.
|
|
* @retval None
|
|
*/
|
|
#define USART_IT_MASK ((uint32_t)0x0000FFFF)
|
|
#define __USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
|
|
(((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
|
|
((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
|
|
#define __USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
|
|
(((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
|
|
((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
|
|
|
|
|
|
/** @brief Checks whether the specified Usart interrupt has occurred or not.
|
|
* @param __HANDLE__: specifies the USART Handle.
|
|
* This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
|
|
* @param __IT__: specifies the USART interrupt source to check.
|
|
* This parameter can be one of the following values:
|
|
* @arg USART_IT_TXE: Transmit Data Register empty interrupt
|
|
* @arg USART_IT_TC: Transmission complete interrupt
|
|
* @arg USART_IT_RXNE: Receive Data register not empty interrupt
|
|
* @arg USART_IT_IDLE: Idle line detection interrupt
|
|
* @arg USART_IT_ERR: Error interrupt
|
|
* @arg USART_IT_PE: Parity Error interrupt
|
|
* @retval The new state of __IT__ (TRUE or FALSE).
|
|
*/
|
|
#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
|
|
(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
|
|
|
|
#define __USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
|
|
#define __USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
|
|
|
|
#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
|
|
#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
|
|
#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
|
|
#define __USART_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
|
|
|
|
#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
/* Initialization/de-initialization functions **********************************/
|
|
HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
|
|
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
|
|
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
|
|
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
|
|
/* IO operation functions *******************************************************/
|
|
HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
|
|
HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
|
|
HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
|
|
HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
|
|
HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
|
|
void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
|
|
void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
|
|
void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
|
|
void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
|
|
void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
|
|
void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
|
|
void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
|
|
|
|
/* Peripheral State functions **************************************************/
|
|
HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
|
|
uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __STM32F4xx_HAL_USART_H */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|