0d7366c912
- Moves definition of BOARD_FLASH_SIZE and other header files related to flash configuration into the Makefile. - Adds board specific clock_config.h. - Adds board.h, pin_mux.h, and peripherals.h as they are required by NXP MCU SDK in order to use our own clock_config.h. - Renames board specific FlexSPI configuration files. - Updates flash frequency of MIMXRT1020_EVK - Creates separated flash_config files for QSPI NOR and QSPI Hyper flash. - Unifies VFS start address to be @ 1M for 1010 and 1020 boards. - Unifies 1050EVK boards - Adds support to both NOR and HyperFlash on boards with both capabilities. - Adds automatic FlexRAM initialization to start-up code based on linker script and NXP HAL. - Applies code formatting to all files in mimxrt port. With this change the flash configuration is restructured and organized. This simplifies the configuration process and provides a better overview of each board's settings. With the integration of clock_config.h, board.h, pin_mux.h, and peripherals.h we gain better control of the settings and clock configurations. Furthermore the implementation of an explicit FlexRAM setup improves the system performance and allows for performance tuning. Signed-off-by: Philipp Ebensberger
75 lines
2.9 KiB
C
75 lines
2.9 KiB
C
#define MICROPY_HW_BOARD_NAME "i.MX RT1020 EVK"
|
|
#define MICROPY_HW_MCU_NAME "MIMXRT1021DAG5A"
|
|
|
|
// i.MX RT1020 EVK has 1 board LED
|
|
// Todo: think about replacing the define with searching in the generated pins?
|
|
#define MICROPY_HW_LED1_PIN (pin_GPIO_AD_B0_05)
|
|
#define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
|
|
#define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
|
|
|
|
#define MICROPY_HW_NUM_PIN_IRQS (3 * 32)
|
|
|
|
// Define mapping logical UART # to hardware UART #
|
|
// RX/TX HW-UART Logical UART
|
|
// D3/D5 LPUART1 Not usable, Since D3 is blocked.
|
|
// D0/D1 LPUART2 -> 1
|
|
// D6/D9 LPUART3 -> 2
|
|
// D10/D12 LPUART5 -> 3
|
|
// D14/D15 LPUART8 -> 4
|
|
// A0/A1 LPUART4 -> 5
|
|
|
|
#define MICROPY_HW_UART_NUM (sizeof(uart_index_table) / sizeof(uart_index_table)[0])
|
|
#define MICROPY_HW_UART_INDEX { 0, 2, 3, 5, 8, 4 }
|
|
|
|
#define IOMUX_TABLE_UART \
|
|
{ IOMUXC_GPIO_AD_B0_06_LPUART1_TX }, { IOMUXC_GPIO_AD_B0_07_LPUART1_RX }, \
|
|
{ IOMUXC_GPIO_AD_B1_08_LPUART2_TX }, { IOMUXC_GPIO_AD_B1_09_LPUART2_RX }, \
|
|
{ IOMUXC_GPIO_AD_B0_14_LPUART3_TX }, { IOMUXC_GPIO_AD_B0_15_LPUART3_RX }, \
|
|
{ IOMUXC_GPIO_AD_B1_10_LPUART4_TX }, { IOMUXC_GPIO_AD_B1_11_LPUART4_RX }, \
|
|
{ IOMUXC_GPIO_AD_B0_10_LPUART5_TX }, { IOMUXC_GPIO_AD_B0_11_LPUART5_RX }, \
|
|
{ 0 }, { 0 }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_SD_B1_02_LPUART8_TX }, { IOMUXC_GPIO_SD_B1_03_LPUART8_RX },
|
|
|
|
#define MICROPY_HW_SPI_INDEX { 1, 3 }
|
|
|
|
#define IOMUX_TABLE_SPI \
|
|
{ IOMUXC_GPIO_AD_B0_10_LPSPI1_SCK }, { IOMUXC_GPIO_AD_B0_11_LPSPI1_PCS0 }, \
|
|
{ IOMUXC_GPIO_AD_B0_12_LPSPI1_SDO }, { IOMUXC_GPIO_AD_B0_13_LPSPI1_SDI }, \
|
|
{ 0 }, { 0 }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_12_LPSPI3_SCK }, { IOMUXC_GPIO_AD_B1_13_LPSPI3_PCS0 }, \
|
|
{ IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO }, { IOMUXC_GPIO_AD_B1_15_LPSPI3_SDI },
|
|
|
|
#define DMA_REQ_SRC_RX { 0, kDmaRequestMuxLPSPI1Rx, kDmaRequestMuxLPSPI2Rx, \
|
|
kDmaRequestMuxLPSPI3Rx, kDmaRequestMuxLPSPI4Rx }
|
|
|
|
#define DMA_REQ_SRC_TX { 0, kDmaRequestMuxLPSPI1Tx, kDmaRequestMuxLPSPI2Tx, \
|
|
kDmaRequestMuxLPSPI3Tx, kDmaRequestMuxLPSPI4Tx }
|
|
|
|
// Define mapping hardware I2C # to logical I2C #
|
|
// SDA/SCL HW-I2C Logical I2C
|
|
// D14/D15 LPI2C4 -> 0
|
|
// A4/A5 LPI2C1 -> 1
|
|
// D0/D1 LPI2C2 -> 2
|
|
|
|
#define MICROPY_HW_I2C_INDEX { 4, 1, 2 }
|
|
|
|
#define IOMUX_TABLE_I2C \
|
|
{ IOMUXC_GPIO_AD_B1_14_LPI2C1_SCL }, { IOMUXC_GPIO_AD_B1_15_LPI2C1_SDA }, \
|
|
{ IOMUXC_GPIO_AD_B1_08_LPI2C2_SCL }, { IOMUXC_GPIO_AD_B1_09_LPI2C2_SDA }, \
|
|
{ 0 }, { 0 }, \
|
|
{ IOMUXC_GPIO_SD_B1_02_LPI2C4_SCL }, { IOMUXC_GPIO_SD_B1_03_LPI2C4_SDA },
|
|
|
|
#define USDHC_DUMMY_PIN NULL, 0
|
|
#define MICROPY_USDHC1 \
|
|
{ \
|
|
.cmd = {GPIO_SD_B0_02_USDHC1_CMD}, \
|
|
.clk = { GPIO_SD_B0_03_USDHC1_CLK }, \
|
|
.cd_b = { GPIO_SD_B0_06_USDHC1_CD_B }, \
|
|
.data0 = { GPIO_SD_B0_04_USDHC1_DATA0 }, \
|
|
.data1 = { GPIO_SD_B0_05_USDHC1_DATA1 }, \
|
|
.data2 = { GPIO_SD_B0_00_USDHC1_DATA2 }, \
|
|
.data3 = { GPIO_SD_B0_01_USDHC1_DATA3 }, \
|
|
}
|